Ceramic Waste as an Alternative Source of Aluminosilicate Raw Material for the Production of Portland Cement Clinker.
- Published in:
- Glass & Ceramics, 2025, v. 82, n. 3, p. 131, doi. 10.1007/s10717-025-00760-y
- By:
- Publication type:
- Article
Works matching DE "PORTLAND cement"
Results: 3871
1
2
Study on cementitious grout for scour protection of offshore wind turbine foundations.
- Published in:
- Marine Georesources & Geotechnology, 2025, v. 43, n. 8, p. 1430, doi. 10.1080/1064119X.2024.2411728
- By:
- Publication type:
- Article
3
Analcime-wairakite formation during experimental cement-bentonite alteration at 200–300 °C.
- Published in:
- American Mineralogist, 2025, v. 110, n. 7, p. 1060, doi. 10.2138/am-2024-9490
- By:
- Publication type:
- Article
4
Comparison of commercial nitrate-based accelerators and their pure constituents on hydration kinetics, composition, and hydration degree of zinc oxide blended Portland cement.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 10, p. 7391, doi. 10.1007/s10973-025-14193-w
- By:
- Publication type:
- Article
5
Investigation of Mechanical Properties of Granite Waste Sludge and Sepiolite Substituted Self-Compacting Mortars.
- Published in:
- Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2025, v. 13, n. 2, p. 499, doi. 10.29109/gujsc.1525887
- By:
- Publication type:
- Article
6
镁渣基碳化养护加气混凝土的制备.
- Published in:
- Journal of Guilin University of Technology, 2025, v. 45, n. 2, p. 221, doi. 10.3969/j.issn.1674-9057.2025.02.010
- By:
- Publication type:
- Article
7
The synergistic mechanism of hydration between nano-SiO<sub>2</sub> and early-strength minerals (C<sub>3</sub>A and C<sub>3</sub>S) in cement.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 8, p. 5961, doi. 10.1007/s10973-025-14177-w
- By:
- Publication type:
- Article
8
Automatic and simple: how to analyze isothermal calorimetry data of cement hydration quantitatively.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 8, p. 5971, doi. 10.1007/s10973-025-14162-3
- By:
- Publication type:
- Article
9
Portland cement paste performance when inert limestone filler is added as clinker replacement.
- Published in:
- AIMS Materials Science, 2025, v. 12, n. 2, p. 1, doi. 10.3934/matersci.2025012
- By:
- Publication type:
- Article
10
Interaction Mechanisms in «Portland Cement—Functional Polymer Mineral Additives» Binder Produced by Different Methods.
- Published in:
- Materials (1996-1944), 2025, v. 18, n. 13, p. 3178, doi. 10.3390/ma18133178
- By:
- Publication type:
- Article
11
Effect of Cement, Plastic Waste, and their Combinations on the Geotechnical Properties of Soft Clay Soil.
- Published in:
- Engineering, Technology & Applied Science Research, 2025, v. 15, n. 3, p. 22990, doi. 10.48084/etasr.10493
- By:
- Publication type:
- Article
12
Geopolymer applications in deep-sea energy and mining infrastructure: a review of properties, challenges, and future prospects.
- Published in:
- Environmental Earth Sciences, 2025, v. 84, n. 12, p. 1, doi. 10.1007/s12665-025-12339-5
- By:
- Publication type:
- Article
13
Preparation of belite–ye'elimite–ferrite (BYF) cement from aluminum residues and steel slag: clinker production and hydration behavior.
- Published in:
- Journal of Sustainable Cement-Based Materials, 2025, v. 14, n. 8, p. 1504, doi. 10.1080/21650373.2025.2512936
- By:
- Publication type:
- Article
14
STUDY ON THE POLYMERIC TREATMENT WITH RICE HUSK SILICA ON SISAL FIBER IN CEMENTICIOUS COMPOSITES.
- Published in:
- Journal of Environmental Engineering & Landscape Management, 2025, v. 33, n. 2, p. 242, doi. 10.3846/jeelm.2025.23566
- By:
- Publication type:
- Article
15
Assessment of strength and stiffness properties of compacted filtered iron ore tailings-Portland cement blends field stack.
- Published in:
- Obras y Proyectos, 2025, n. 37, p. 33, doi. 10.21703/0718-2813.2025.37.3234
- By:
- Publication type:
- Article
16
Impact of Recycled Concrete and Ceramic Fillers on the Performance of Cementitious Systems: Microstructural, Mechanical, and Durability Aspects.
- Published in:
- Recycling (MDPI AG), 2025, v. 10, n. 3, p. 108, doi. 10.3390/recycling10030108
- By:
- Publication type:
- Article
17
A Review of the Calcium Sulphoaluminate Cement Mixed with Seawater: Hydration Process, Microstructure, and Durability.
- Published in:
- Journal of Marine Science & Engineering, 2025, v. 13, n. 6, p. 1076, doi. 10.3390/jmse13061076
- By:
- Publication type:
- Article
18
Durability Performance of Alkali-Activated Natural Pozzolan and Limestone Powder Mortar in Sulfate Environments.
- Published in:
- Sustainability (2071-1050), 2025, v. 17, n. 12, p. 5611, doi. 10.3390/su17125611
- By:
- Publication type:
- Article
19
Chemical and Mineralogical Characterizations of Different Kaolinitic Clays from Burkina Faso: Feasibility for the Synthesis of Geopolymer Binders.
- Published in:
- Geosciences (2076-3263), 2025, v. 15, n. 6, p. 230, doi. 10.3390/geosciences15060230
- By:
- Publication type:
- Article
20
Heat Resistance of Coatings Based on Epoxy Oligomer Emulsion and Mineral Compounds with Hydraulic Properties or the Ability to Polymerize.
- Published in:
- Theoretical Foundations of Chemical Engineering, 2025, v. 59, n. 1, p. 70, doi. 10.1134/S0040579525700149
- By:
- Publication type:
- Article
21
Sustainable Pavement Materials: Design, Application, and Performance Evaluation.
- Published in:
- Materials (1996-1944), 2025, v. 18, n. 12, p. 2783, doi. 10.3390/ma18122783
- By:
- Publication type:
- Article
22
Fundamental Properties of Expanded Perlite Aggregated Foamed Concrete with Different Supplementary Cementitious Materials.
- Published in:
- Materials (1996-1944), 2025, v. 18, n. 12, p. 2671, doi. 10.3390/ma18122671
- By:
- Publication type:
- Article
23
Performance Testing of Hydraulic Cements: Measuring Sulfate Resistance.
- Published in:
- Journal of Research of the National Institute of Standards & Technology, 2018, v. 123, p. 1, doi. 10.6028/jres.123.010
- By:
- Publication type:
- Article
24
Chloride Adsorption of Cement Hydrates Combined with Chemical Evolution of Pore Solution.
- Published in:
- ACI Materials Journal, 2024, v. 121, n. 5, p. 52, doi. 10.14359/51742037
- By:
- Publication type:
- Article
25
Contribution of Shrinkage-Reducing Admixture and Lightweight Sand to Moist-Curing Requirement for Fiber-Reinforced Ultra-High-Performance Concrete.
- Published in:
- ACI Materials Journal, 2024, v. 121, n. 4, p. 69
- By:
- Publication type:
- Article
26
Development of In-Place Test Methods for Evaluating Printable Concretes.
- Published in:
- ACI Materials Journal, 2024, v. 121, n. 2/3, p. 59, doi. 10.14359/51740265
- By:
- Publication type:
- Article
27
Durability Aspects of Concrete Containing Nano Titanium Dioxide.
- Published in:
- ACI Materials Journal, 2023, v. 120, n. 2, p. 25, doi. 10.14359/51738490
- By:
- Publication type:
- Article
28
Reducing Greenhouse Gas Emissions Using Cellulose Nanocrystals, Ordinary Portland Cement, and Limestone.
- Published in:
- ACI Materials Journal, 2023, v. 120, n. 1, p. 205, doi. 10.14359/51737293
- By:
- Publication type:
- Article
29
Role of High-Volume Mineral Admixtures on Characteristics of Engineered Cementitious Composites.
- Published in:
- ACI Materials Journal, 2023, v. 120, n. 1, p. 193, doi. 10.14359/51737292
- By:
- Publication type:
- Article
30
Studies on Portland Slag Cement Made Using Blast-Furnace and Linz-Donawitz Slag.
- Published in:
- ACI Materials Journal, 2023, v. 120, n. 1, p. 143, doi. 10.14359/51737289
- By:
- Publication type:
- Article
31
Performance, Durability, and Life Cycle Impacts of Concrete Produced with CO<sub>2</sub> as Admixture.
- Published in:
- ACI Materials Journal, 2023, v. 120, n. 1, p. 53, doi. 10.14359/51734732
- By:
- Publication type:
- Article
32
Calcium Sulfoaluminate Cement Manufacturing in India--Prospects and Prognosis of Environmental Impacts.
- Published in:
- ACI Materials Journal, 2023, v. 120, n. 1, p. 17, doi. 10.14359/51738456
- By:
- Publication type:
- Article
33
Investigation of Pore Structure of Lightweight Ultra-High-Performance Concrete under Curing Regimes.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 6, p. 133, doi. 10.14359/51737188
- By:
- Publication type:
- Article
34
Quantifying Deterioration Due to Alkali-Silica Reaction in Restrained Portland Cement Concrete Pavement.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 6, p. 109, doi. 10.14359/51735981
- By:
- Publication type:
- Article
35
Percolation Time and Rigidification Rate of Cementitious Suspensions.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 5, p. 281, doi. 10.14359/51735982
- By:
- Publication type:
- Article
36
Quantifying Impact of Internally Cured Concrete on Duration of External Curing.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 5, p. 269, doi. 10.14359/51735980
- By:
- Publication type:
- Article
37
Effects of Calcium Bromide on Early Hydration of Portland Cement at Low Temperature (5°C).
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 5, p. 11, doi. 10.14359/51735946
- By:
- Publication type:
- Article
38
Effective Transport and Efficiency Parameters for Electrokinetic Nanoparticle Treatment of Hardened Cement Paste.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 4, p. 139, doi. 10.14359/51734730
- By:
- Publication type:
- Article
39
Thermal, Microstructural, and Mechanical Properties of Ternary Blended Geopolymers.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 4, p. 103, doi. 10.14359/51734728
- By:
- Publication type:
- Article
40
Properties of Sugarcane Bagasse Ash Concrete Modified with Bacterial Treatment.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 3, p. 187, doi. 10.14359/51734613
- By:
- Publication type:
- Article
41
Heat Contribution of Slag to Temperature Development of Mass Concrete.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 3, p. 115, doi. 10.14359/51734606
- By:
- Publication type:
- Article
42
Suitability of CPC-18 and Carbonation of Specialty Cementitious Systems.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 3, p. 79, doi. 10.14359/51734609
- By:
- Publication type:
- Article
43
Effect of Carbonation on Radon Exhalation Rate in Concrete.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 3, p. 67, doi. 10.14359/51734603
- By:
- Publication type:
- Article
44
Shrinkage of Alkali-Activated Combined Slag and Fly Ash Concrete Cured at Ambient Temperature.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 3, p. 15, doi. 10.14359/51734615
- By:
- Publication type:
- Article
45
Effect of Curing Method on Material Properties of Very-Early-Strength Latex-Modified Concrete Used in Partial- Depth Repair.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 2, p. 105, doi. 10.14359/51734223
- By:
- Publication type:
- Article
46
Additives to Increase Carbonation Resistance of Slag Activated with Sodium Sulfate.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 2, p. 53, doi. 10.14359/51734400
- By:
- Publication type:
- Article
47
Study of Alite-Calcium Sulfoaluminate Cement Produced from a High-Alumina Fly Ash.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 1, p. 263, doi. 10.14359/51734199
- By:
- Publication type:
- Article
48
Durability Performance of Blended Cement with Calcined Illitic Shale.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 1, p. 135, doi. 10.14359/51734192
- By:
- Publication type:
- Article
49
Three-Dimensional Printability of White Portland Cement Containing Cenospheres.
- Published in:
- ACI Materials Journal, 2021, v. 118, n. 6, p. 147, doi. 10.14359/51733119
- By:
- Publication type:
- Article
50
Alkali-Activated Cement Subject to Alkali-Aggregate Reaction.
- Published in:
- ACI Materials Journal, 2021, v. 118, n. 5, p. 137, doi. 10.14359/51732937
- By:
- Publication type:
- Article