Found: 200
Select item for more details and to access through your institution.
Evaluation of cell‐laden three‐dimensional bioprinted polymer composite scaffolds based on synthesized photocrosslinkable poly(ethylene glycol) dimethacrylate with different molecular weights.
- Published in:
- Medcomm: Biomaterials & Applications, 2024, v. 3, n. 2, p. 1, doi. 10.1002/mba2.87
- By:
- Publication type:
- Article
Glyphosate detection via a nanomaterial-enhanced electrochemical molecularly imprinted polymer sensor.
- Published in:
- Journal of Analytical Science & Technology, 2024, v. 15, n. 1, p. 1, doi. 10.1186/s40543-024-00417-5
- By:
- Publication type:
- Article
Synthesis and characterisation of microcapsules for self-healing dental resin composites.
- Published in:
- BMC Oral Health, 2024, v. 24, n. 1, p. 1, doi. 10.1186/s12903-023-03764-8
- By:
- Publication type:
- Article
Application of 20% silver nanoclusters in polymethacrylic acid on simulated dentin caries; its penetration depth and effect on surface hardness.
- Published in:
- Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-48519-1
- By:
- Publication type:
- Article
Simple UV-Grafting of PolyAcrylic and PolyMethacrylic Acid on Silicone Breast Implant Surfaces: Chemical and Mechanical Characterizations.
- Published in:
- Coatings (2079-6412), 2023, v. 13, n. 11, p. 1888, doi. 10.3390/coatings13111888
- By:
- Publication type:
- Article
Studies on Quantum Chemical Simulation and Adsorption Properties of Citrinin Molecularly Imprinted Preassembly System.
- Published in:
- Journal of Chinese Institute of Food Science & Technology, 2023, v. 23, n. 11, p. 361, doi. 10.16429/j.1009-7848.2023.11.034
- By:
- Publication type:
- Article
Designing an efficient organic–inorganic hybrid nanocomposite for simultaneous oxidative/adsorptive desulfurization of model and real fuel oils.
- Published in:
- Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-42392-8
- By:
- Publication type:
- Article
Drug-Polymer Miscibility and the Overlap Concentration (C*) as Measured by Rheology: Variation of Polymer Structure.
- Published in:
- Pharmaceutical Research, 2023, v. 40, n. 9, p. 2229, doi. 10.1007/s11095-023-03570-5
- By:
- Publication type:
- Article
Magnetic Molecularly Imprinted Chitosan Combined with a Paper-Based Analytical Device for the Smartphone Discrimination of Tryptophan Enantiomers.
- Published in:
- Biosensors (2079-6374), 2023, v. 13, n. 8, p. 830, doi. 10.3390/bios13080830
- By:
- Publication type:
- Article
The Use of 3D Technology in the Management of Residual Asymmetry following Orthognathic Surgery: A Case Report.
- Published in:
- Healthcare (2227-9032), 2023, v. 11, n. 15, p. 2172, doi. 10.3390/healthcare11152172
- By:
- Publication type:
- Article
Effect of Lanthanum Sorption on the Behavior of Rarely Crosslinked Acidic and Basic Polymer Hydrogels during Remote Interaction.
- Published in:
- Polymers (20734360), 2023, v. 15, n. 6, p. 1420, doi. 10.3390/polym15061420
- By:
- Publication type:
- Article
Treatment of Fracture-Related Infections with Bone Abscess Formation after K-Wire Fixation of Pediatric Distal Radius Fractures in Adolescents—A Report of Two Clinical Cases.
- Published in:
- Children, 2023, v. 10, n. 3, p. 581, doi. 10.3390/children10030581
- By:
- Publication type:
- Article
Hybrid solid sensitive arrays/polypropylene composites: A study on sensing alkaline vapors.
- Published in:
- Journal of Applied Polymer Science, 2022, v. 139, n. 46, p. 1, doi. 10.1002/app.53158
- By:
- Publication type:
- Article
Bone defect treatment: does the type and properties of the spacer affect the induction of Masquelet membrane? Evidence today.
- Published in:
- European Journal of Trauma & Emergency Surgery, 2022, v. 48, n. 6, p. 4403, doi. 10.1007/s00068-022-02005-x
- By:
- Publication type:
- Article
Comparative evaluation of flexural strength of denture base resin materials processed using compression molding technique, injection molding technique, and computer-aided design CAM technique: An in vitro study.
- Published in:
- Dental Research Journal, 2022, v. 19, n. 11, p. 100, doi. 10.4103/1735-3327.361360
- By:
- Publication type:
- Article
Chronic and Acute Water-Soluble Microplastics Uptake and Effects on Growth and Reproduction of Daphnia magna.
- Published in:
- Water, Air & Soil Pollution, 2022, v. 233, n. 11, p. 1, doi. 10.1007/s11270-022-05907-z
- By:
- Publication type:
- Article
The evaluation of cytotoxicity and cytokine IL-6 production of root canal sealers with and without the incorporation of simvastatin: an invitro study.
- Published in:
- BMC Oral Health, 2022, v. 22, n. 1, p. 1, doi. 10.1186/s12903-022-02039-y
- By:
- Publication type:
- Article
A novel biodegradable polymer scaffold for growth of corneal epithelial cells.
- Published in:
- Indian Journal of Ophthalmology, 2022, v. 70, n. 10, p. 3693, doi. 10.4103/ijo.IJO_210_22
- By:
- Publication type:
- Article
Insights into structural difference between sodium polyacrylate PAA and sodium polymethacrylate PMA in salt solutions investigated by molecular simulations.
- Published in:
- Journal of Materials Science, 2022, v. 57, n. 23, p. 10569, doi. 10.1007/s10853-021-06836-8
- By:
- Publication type:
- Article
Fe(II)ion‐imprinted copolymer gels − smart materials for Fe(II)/Fe(III) speciation in surface waters.
- Published in:
- Polymer International, 2022, v. 71, n. 6, p. 706, doi. 10.1002/pi.6334
- By:
- Publication type:
- Article
A pH Dual-Responsive Multifunctional Nanoparticle Based on Mesoporous Silica with Metal-Polymethacrylic Acid Gatekeeper for Improving Plant Protection and Nutrition.
- Published in:
- Nanomaterials (2079-4991), 2022, v. 12, n. 4, p. 687, doi. 10.3390/nano12040687
- By:
- Publication type:
- Article
Novel Amphiphilic Polyfluorene-Graft-(Polymethacrylic Acid) Brushes: Synthesis, Conformation, and Self-Assembly.
- Published in:
- Polymers (20734360), 2021, v. 13, n. 24, p. 4429, doi. 10.3390/polym13244429
- By:
- Publication type:
- Article
Analysis of heterocyclic aromatic amines using selective extraction by magnetic molecularly imprinted polymers coupled with liquid chromatography -- Mass spectrometry.
- Published in:
- Journal of Food & Drug Analysis, 2021, v. 29, n. 4, p. 726, doi. 10.38212/2224-6614.3384
- By:
- Publication type:
- Article
Bis[2-(Methacryloyloxy) Ethyl] Phosphate as a Primer for Enamel and Dentine.
- Published in:
- 2021
- By:
- Publication type:
- journal article
Dual Cross‐Linked Polymethacrylic Acid Hydrogels with Tunable Mechanical Properties and Shape Memory Behavior.
- Published in:
- Macromolecular Materials & Engineering, 2021, v. 306, n. 9, p. 1, doi. 10.1002/mame.202100201
- Publication type:
- Article
Immunopharmacological Properties of Methacrylic Acid Polymers as Potential Polymeric Carrier Constituents of Anticancer Drugs.
- Published in:
- Molecules, 2021, v. 26, n. 16, p. 4855, doi. 10.3390/molecules26164855
- By:
- Publication type:
- Article
Study on preparation and properties of gelatin/polymethacrylic acid composite hydrogel.
- Published in:
- Journal of Light Industry, 2020, v. 35, n. 6, p. 50, doi. 10.12187/2020.06.007
- By:
- Publication type:
- Article
Polarization holography in azobenzene polymeric films prepared using the new chemical method.
- Published in:
- Semiconductor Physics, Quantum Electronics & Optoelectronics, 2020, v. 23, n. 3, p. 323, doi. 10.15407/spqeo23.03.323
- By:
- Publication type:
- Article
Nanogel-Based Filler-Matrix Interphase for Polymerization Stress Reduction.
- Published in:
- 2019
- By:
- Publication type:
- journal article
Preparation and pH-Dependent Properties of Hydrogels Based on Acidic Copolymers with PEG Side Chains and α-Cyclodextrin.
- Published in:
- Macromolecular Chemistry & Physics, 2019, v. 220, n. 12, p. 1, doi. 10.1002/macp.201900081
- By:
- Publication type:
- Article
Nanoparticles of 4,7‐dichloro‐2‐quinolinemethylacrylate‐based copolymers and their potential cytotoxic activity on human breast carcinoma cells.
- Published in:
- Journal of Applied Polymer Science, 2019, v. 136, n. 20, p. N.PAG, doi. 10.1002/app.47545
- By:
- Publication type:
- Article
Enhancement by Metallic Tube Filling of the Mechanical Properties of Electromagnetic Wave Absorbent Polymethacrylimide Foam.
- Published in:
- Polymers (20734360), 2019, v. 11, n. 2, p. 372, doi. 10.3390/polym11020372
- By:
- Publication type:
- Article
EFECTUL SILANIZĂRII ASUPRA COMPOZITELOR PE BAZĂ DE ALUMINĂ ŞI ACID POLIMETACRILIC CU APLICAŢII CA MATERIALE PENTRU PROTEZE DENTARE.
- Published in:
- Romanian Journal of Materials / Revista Romana de Materiale, 2019, v. 49, n. 1, p. 3
- By:
- Publication type:
- Article
Polyelectrolytes Tailored Enzyme Cascades with Enhanced Stability and Activity for One‐pot Synthesis.
- Published in:
- ChemCatChem, 2018, v. 10, n. 23, p. 5391, doi. 10.1002/cctc.201801532
- By:
- Publication type:
- Article
Synthesis of copper(II) ion‐imprinted polymers via suspension polymerization.
- Published in:
- Polymers for Advanced Technologies, 2018, v. 29, n. 12, p. 3134, doi. 10.1002/pat.4434
- By:
- Publication type:
- Article
A Robust, Air‐Stable and Recyclable Hydrogel Toward Stretchable Electronic Device Applications.
- Published in:
- Macromolecular Materials & Engineering, 2018, v. 303, n. 11, p. N.PAG, doi. 10.1002/mame.201800282
- By:
- Publication type:
- Article
Qualitative and Quantitative Evaluation of Cytotoxicity of Five Different One-Step Self-Etching Adhesives.
- Published in:
- 2018
- By:
- Publication type:
- journal article
Development and characterization of pH‐responsive polyethylene glycol‐co‐poly(methacrylic acid) polymeric network system for colon target delivery of oxaliplatin: Its acute oral toxicity study.
- Published in:
- Advances in Polymer Technology, 2018, v. 37, n. 6, p. 1806, doi. 10.1002/adv.21840
- By:
- Publication type:
- Article
Temperature- and pH-Dependent Drug Release of Block Copolymers of Methacrylic Acid and Poly(Ethylene Glycol) Methyl Ether Methacrylates.
- Published in:
- Philippine Journal of Science, 2018, v. 147, n. 3, p. 363
- By:
- Publication type:
- Article
Control of assembly size of poly (methacrylic acid)-grafted fullerenes in aqueous solution.
- Published in:
- Journal of Polymer Research, 2018, v. 25, n. 8, p. 1, doi. 10.1007/s10965-018-1575-6
- By:
- Publication type:
- Article
Poly (methacrylic acid)‐based molecularly imprinted polymer nanoparticles containing 5‐fluourouracil used in colon cancer therapy potentially.
- Published in:
- Polymers for Advanced Technologies, 2018, v. 29, n. 8, p. 2401, doi. 10.1002/pat.4353
- By:
- Publication type:
- Article
The effect of radiation exposure on the mechanical behavior of Rohacell foams used in composite structures.
- Published in:
- Polymer Composites, 2018, v. 39, n. 7, p. 2181, doi. 10.1002/pc.24182
- By:
- Publication type:
- Article
Design of robust and photoluminescence‐responsive materials based on poly(methacrylic acid‐<italic>co</italic>‐<italic>m</italic>‐phenylenediamine) with graphene oxide composite hydrogels and its adsorption.
- Published in:
- Journal of Applied Polymer Science, 2018, v. 135, n. 23, p. 1, doi. 10.1002/app.46354
- By:
- Publication type:
- Article
All‐solid‐State Potentiometric Cu(II)‐selective Sensor Based on Ion Imprinted Methacrylamide Polymer.
- Published in:
- Electroanalysis, 2018, v. 30, n. 6, p. 1147, doi. 10.1002/elan.201700849
- By:
- Publication type:
- Article
High‐Strength, Thermally Activated Shape Memory Hydrogels Based on Hydrogen Bonding between MAAc and NVP.
- Published in:
- Macromolecular Chemistry & Physics, 2018, v. 219, n. 10, p. 1, doi. 10.1002/macp.201700636
- By:
- Publication type:
- Article
The colloidal properties of alkaline‐soluble waterborne polymers.
- Published in:
- Journal of Applied Polymer Science, 2018, v. 135, n. 17, p. 1, doi. 10.1002/app.46168
- By:
- Publication type:
- Article
Unimodal Nano-Sized Bentonite-E Modified by Organic Monomeric/Polymeric Methacrylic Acid Zwitterions.
- Published in:
- Fibre Chemistry, 2018, v. 50, n. 1, p. 64, doi. 10.1007/s10692-018-9932-0
- By:
- Publication type:
- Article
Zymography of Hybrid Layers Created Using Extrafibrillar Demineralization.
- Published in:
- 2018
- By:
- Publication type:
- journal article
Thermal and Mechanical Characterization of EMA-TEGDMA Mixtures for Cosmetic Applications.
- Published in:
- Polymers (20734360), 2018, v. 10, n. 3, p. 256, doi. 10.3390/polym10030256
- By:
- Publication type:
- Article
Effect of unmodified kraft lignin concentration on the emulsion and miniemulsion copolymerization of styrene with <italic>n</italic>‐butyl acrylate and methacrylic acid to produce polymer hybrid latex.
- Published in:
- Polymers for Advanced Technologies, 2018, v. 29, n. 3, p. 1094, doi. 10.1002/pat.4221
- By:
- Publication type:
- Article