Works matching DE "POLYMER blend analysis"

Results: 38

Effects of ultrasound on the conformational and crystallization behavior of isotactic polypropylene polymerized with different Ziegler-Natta catalyst.

Published in:

Polymer Science -- Series A, 2015, v. 57, n. 5, p. 565, doi. 10.1134/S0965545X15050053

By:

Chen, Shaohua;
Liu, Yuansen;
Zeng, Tao;
Duan, Nannan;
Wang, Zhi;
Wang, Luoxin;
Wang, Hua;
Xu, Changan;
Kang, Jian

Publication type:

Article

Non-isothermal crystallization kinetics and activation energy of bio-based poly(trimethylene terephthalate)/poly(butylene adipate- co-terephthalate) polyester blend.

Published in:

Polymer Science -- Series A, 2015, v. 57, n. 5, p. 628, doi. 10.1134/S0965545X15050077

By:

Dhandapani, Suresh;
Nayak, S.;
Mohanty, Smita

Publication type:

Article

Effect of solvent on the compatibility of polyvinyl alcohol and polymethylmethacrylate by dilute solution viscometry method.

Published in:

Polymer Science -- Series A, 2015, v. 57, n. 5, p. 622, doi. 10.1134/S0965545X15050144

By:

Melad, Omar;
Romiya, Maisar

Publication type:

Article

Studies of latex blends of natural rubber/poly(methyl methacrylate- co-2-ethylhexyl methacrylate) and their comparison with incompatible natural rubber/poly(methyl methacrylate).

Published in:

Polymer Science -- Series A, 2015, v. 57, n. 5, p. 613, doi. 10.1134/S0965545X15050181

By:

Zheng, Zhaojun;
Tian, Xiaohui;
Sun, Jinyu;
Yuan, Yizhong;
Xie, Bing

Publication type:

Article

Phase structure and properties of blends based on polystyrene and carbosilane dendrimers.

Published in:

Polymer Science -- Series A, 2015, v. 57, n. 5, p. 586, doi. 10.1134/S0965545X15050156

By:

Serenko, O.;
Roldugin, V.;
Novozhilova, N.;
Soldatov, M.;
Nikiforova, G.;
Mironova, M.;
Ilyin, S.;
Kulichikhin, V.;
Muzafarov, A.

Publication type:

Article

Effects of the phases and the sizes of disperse particles on the elastic moduli of composites based on polymer mixtures.

Published in:

Polymer Science -- Series A, 2015, v. 57, n. 5, p. 596, doi. 10.1134/S0965545X1505003X

By:

Askadskii, A.;
Matseevich, T.;
Popova, M.;
Kazantseva, V.;
Afanasyev, E.;
Kovriga, O.;
Kondrashchenko, V.

Publication type:

Article

Effect of Superabsorbent Polymer on the Properties of Concrete.

Published in:

Polymers (20734360), 2017, v. 9, n. 12, p. 672, doi. 10.3390/polym9120672

By:

Juntao Dang;
Jun Zhao;
Zhaohua Du

Publication type:

Article

Influence of PP content on mechanical properties, water absorption, and morphology in PA6/PP blend.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 25, p. N.PAG, doi. 10.1002/app.47690

By:

Sridhar, Aparna;
Doddipatla, Purnima

Publication type:

Article

Influence of reactive blending temperature on impact toughness and phase morphologies of PLA ternary blend system containing magnesium ionomer.

Published in:

Journal of Applied Polymer Science, 2019, v. 136, n. 25, p. N.PAG, doi. 10.1002/app.47682

By:

Chen, Qiu;
Hao, Chaowei;
Shan, Pengjia;
Tong, Congcong;
Zhang, Yan;
Liu, Hongzhi;
Yan, Dongguang

Publication type:

Article

Electrospinning polymer blend of PLA and PBAT: Electrospinnability–solubility map and effect of polymer solution parameters toward application as antibiotic‐carrier mats.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 28, p. 1, doi. 10.1002/app.46486

By:

Khatsee, Sarunphat;
Daranarong, Donraporn;
Punyodom, Winita;
Worajittiphon, Patnarin

Publication type:

Article

Biodegradable compatibilized polymer blends for packaging applications: A literature review.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 24, p. 1, doi. 10.1002/app.45726

By:

Muthuraj, Rajendran;
Misra, Manjusri;
Mohanty, Amar Kumar

Publication type:

Article

Assessment of compatibilization efficiency of SEBS in the PP/PS blend.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 18, p. 1, doi. 10.1002/app.46244

By:

Yang, Qi;
Zhao, Xueyan;
Huang, Yajiang;
Li, Guangxian;
Kong, Miqiu

Publication type:

Article

Influence of incorporation methods of ATH on microstructure, elastomeric properties, flammability, and thermal decomposition of dynamically vulcanized NR/PP blends.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 18, p. 1, doi. 10.1002/app.46231

By:

Lopattananon, Natinee;
Walong, Alif;
Sakai, Tadamoto

Publication type:

Article

High heat resistant blends of poly(methyl methacrylate) and styrenic copolymers via post reactor modification.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 18, p. 1, doi. 10.1002/app.46220

By:

Muthukrishnan, Sharmila;
Mitra, Susanta;
Ranjith, P.;
Gopalakrishnan, Sadasivam;
Parthipan, P.;
Al‐Farhood, Bander

Publication type:

Article

Gamma radiation aging of EVA/EPDM blends: Effect of vinyl acetate (VA) content and radiation dose on the alteration in mechanical, thermal, and morphological behavior.

Published in:

Journal of Applied Polymer Science, 2018, v. 135, n. 18, p. 1, doi. 10.1002/app.46216

By:

Sharma, Bhuwanesh Kumar;
Mahanwar, P. A.;
Krishnanand, Kumar;
Sarma, K. S. S.;
Ray Chowdhury, Subhendu

Publication type:

Article

Melt rheological properties of PBT/SEBS and reactively compatibilized PBT/SEBS/SEBS- g-MA polymer blends.

Published in:

Journal of Applied Polymer Science, 2015, v. 132, n. 5, p. n/a, doi. 10.1002/app.41402

By:

Sharma, Rajul;
Maiti, Saurindra Nath

Publication type:

Article

Silver‐Doped Zinc Oxide as a Nanofiller for Development of Poly(vinyl alcohol)/Poly(vinyl pyrrolidone) Blend Nanocomposites.

Published in:

Advances in Polymer Technology, 2018, v. 37, n. 1, p. 137, doi. 10.1002/adv.21650

By:

Ramesan, M. T.;
Varghese, Meghana;
P, Jayakrishnan;
Periyat, Pradeepan

Publication type:

Article

Shape memory and mechanical properties of TPU/ABS blends: The role of pristine versus organo‐modified carbon nanotubes.

Published in:

Polymer Composites, 2018, v. 39, p. E984, doi. 10.1002/pc.24387

By:

Memarian, Farzaneh;
Fereidoon, Abdolhossein;
Ghorbanzadeh Ahangari, Morteza;
Ali Khonakdar, Hossein

Publication type:

Article

Mechanical and Thermal Properties of Thermoplastic Polyurethane-Toughened Polylactide-Based Nanocomposites.

Published in:

Polymer Composites, 2014, v. 35, n. 9, p. 1744, doi. 10.1002/pc.22828

By:

Liu, Zheng‐Wei;
Chou, Hung‐Chia;
Chen, Szu‐Hsien;
Tsao, Ching‐Ting;
Chuang, Ching‐Nan;
Cheng, Li‐Chiun;
Yang, Chen‐Han;
Wang, Chih‐Kuang;
Hsieh, Kuo‐Huang

Publication type:

Article

Brittle–ductile transition behavior of poly(ethylene terephthalate)/poly(ethylene-octene) blend: the roles of compatibility and test temperature.

Published in:

Journal of Materials Science, 2014, v. 49, n. 4, p. 1794, doi. 10.1007/s10853-013-7867-7

By:

Su, Juan-juan;
Li, Yu-han;
Wang, Ke;
Fu, Qiang

Publication type:

Article

Study on the compatibility and crystalline morphology of NBR/PEO binary blends.

Published in:

Journal of Materials Science, 2013, v. 48, n. 19, p. 6811, doi. 10.1007/s10853-013-7486-3

By:

Yang, Shuyan;
Liu, Zhimeng;
Jiao, Yuanqi;
Liu, Yuping;
Luo, Weixin

Publication type:

Article

Drying-induced changes in the structure of alkali-activated pastes.

Published in:

Journal of Materials Science, 2013, v. 48, n. 9, p. 3566, doi. 10.1007/s10853-013-7152-9

By:

Ismail, Idawati;
Bernal, Susan;
Provis, John;
Hamdan, Sinin;
Deventer, Jannie

Publication type:

Article

Composition-dependent physical properties of poly[(vinylidene fluoride)- co-trifluoroethylene]-poly(ethylene oxide) blends.

Published in:

Journal of Materials Science, 2013, v. 48, n. 9, p. 3494, doi. 10.1007/s10853-013-7141-z

By:

Costa, C.;
Machiavello, M.;
Ribelles, J.;
Lanceros-Méndez, S.

Publication type:

Article

How Performance and Fate of Biodegradable Mulch Films are Impacted by Field Ageing.

Published in:

Journal of Polymers & the Environment, 2018, v. 26, n. 6, p. 2588, doi. 10.1007/s10924-017-1154-7

By:

Touchaleaume, François;
Angellier-Coussy, Hélène;
Raffard, Grégory;
Gontard, Nathalie;
Gastaldi, Emmanuelle;
César, Guy

Publication type:

Article

Injection-Molded Bioblends from Lignin and Biodegradable Polymers: Processing and Performance Evaluation.

Published in:

Journal of Polymers & the Environment, 2018, v. 26, n. 6, p. 2360, doi. 10.1007/s10924-017-1132-0

By:

Adams, Ben;
Misra, Manjusri;
Mohanty, Amar K.;
Abdelwahab, Mohamed

Publication type:

Article

VISCOMETRIC STUDIES OF CHITOSAN/POLYACRYLAMIDE MIXTURES.

Published in:

Progress on Chemistry & Application of Chitin & its Derivatives, 2014, v. 19, p. 73, doi. 10.15259/PCACD.19.08

By:

Lewandowska, Katarzyna;
Sionkowska, Alina;
Krasińska, Katarzyna

Publication type:

Article

MISCIBILITY AND INTERACTIONS IN CHITOSAN AND POLYACRYLAMIDE MIXTURES.

Published in:

Progress on Chemistry & Application of Chitin & its Derivatives, 2014, v. 19, p. 65, doi. 10.15259/PCACD.19.07

By:

Lewandowska, Katarzyna

Publication type:

Article

Influence of blending and blend morphology on the thermal properties and crystallization behaviour of PLA and PCL in PLA/PCL blends.

Published in:

Journal of Materials Science, 2016, v. 51, n. 9, p. 4670, doi. 10.1007/s10853-016-9784-z

By:

Luyt, A.;
Gasmi, S.

Publication type:

Article

Influence of thermoplastic spacer on the mechanical, electrical, and thermal properties of carbon black filled epoxy adhesives.

Published in:

Polymers for Advanced Technologies, 2017, v. 28, n. 3, p. 345, doi. 10.1002/pat.3894

By:

Phua, Jin‐Luen;
Teh, Pei‐Leng;
Ghani, Supri Abdul;
Yeoh, Cheow‐Keat

Publication type:

Article

Compatibility of poly(acrylic acid)/starch blends.

Published in:

Starch / Staerke, 2015, v. 67, n. 11/12, p. 1061, doi. 10.1002/star.201500011

By:

Bin-Dahman, Osamah A.;
Jose, Jobin;
Al-Harthi, Mamdouh A.

Publication type:

Article

Largely restricted nucleation effect of carbon nanotubes in a miscible poly(vinylidene fluoride)/poly(butylene succinate) blend.

Published in:

Polymer International, 2016, v. 65, n. 12, p. 1417, doi. 10.1002/pi.5197

By:

Mao, Hanjun;
Zhang, Tingting;
Zhang, Nan;
Huang, Ting;
Yang, Jinghui;
Wang, Yong

Publication type:

Article

Effect Of Melt Spinning And Drawing On The Formation Of In-Situ Reinforced Blends With Semi Crystalline Matrix.

Published in:

2004

By:

Olszynski, Przemyslaw;
Duckett, R. A.;
Kozlowski, Marek

Publication type:

Abstract

Predicting the Flory-Huggins X Parameter for Polymers with Stiffness Mismatch from Molecular Dynamics Simulations.

Published in:

Polymers (20734360), 2016, v. 8, n. 6, p. 241, doi. 10.3390/polym8060241

By:

Kozuch, Daniel J.;
Wenlin Zhang;
Milner, Scott T.

Publication type:

Article

New Evidences on the Process Sensitivity of Some Renewable Blends Based on Starch considering Their Melt Rheological Properties.

Published in:

International Journal of Polymer Science, 2016, p. 1, doi. 10.1155/2016/7873120

By:

Dimonie, Doina;
Petrache, Marius;
Damian, Celina;
Anton, Liliana;
Musat, Miruna;
Dima, Ştefan-Ovidiu;
Jinescu, Cosmin;
Maria, Rapa

Publication type:

Article

Quantifying the Effect of Polymer Blending through Molecular Modelling of Cyanurate Polymers.

Published in:

PLoS ONE, 2012, v. 7, n. 9, p. 1, doi. 10.1371/journal.pone.0044487

By:

Crawford, Alasdair O.;
Hamerton, Ian;
Cavalli, Gabriel;
Howlin, Brendan J.;
Paci, Emanuele

Publication type:

Article

Morphological Evolution of Polystyrene/Polyethylene Blend Induced by Strong Second Melt Penetration.

Published in:

Macromolecular Materials & Engineering, 2016, v. 301, n. 6, p. 714, doi. 10.1002/mame.201500458

By:

Zhang, Rui‐Yan;
Yang, Wei;
Xia, Xiao‐Chao;
Zhu, Chun‐Xia;
He, Shan;
Huang, Yan‐Hao;
Liu, Zheng‐Ying;
Fu, Xiao‐Rong;
Feng, Jian‐Ming;
Yang, Ming‐Bo

Publication type:

Article

<sup>1</sup>H-<sup>19</sup>F REDOR-filtered NMR spin diffusion measurements of domain size in heterogeneous polymers.

Published in:

Magnetic Resonance in Chemistry, 2017, v. 55, n. 11, p. 1006, doi. 10.1002/mrc.4623

By:

Sorte, Eric G.;
Alam, Todd M.

Publication type:

Article

Study on uniformity of a melt-blown fibrous web based on an image analysis technique.

Published in:

e-Polymers, 2017, v. 17, n. 3, p. 211, doi. 10.1515/epoly-2016-0053

By:

Guangwu Sun;
Xiaoxia Sun;
Xinhou Wang

Publication type:

Article