Works matching DE "POLYAMIDES"

Results: 4470

Facile Access to Piezoelectric Polyamides by Polyamidation of Carboxylic Acids and Ynamides for Potent Tumor Immunotherapy.

Published in:

Angewandte Chemie, 2025, v. 137, n. 21, p. 1, doi. 10.1002/ange.202424923

By:

Li, Xingguang;
Yan, Ruiqi;
Tan, Mei;
Kwok, Ryan T. K.;
Sun, Jianwei;
Xiang, Huijing;
Ma, Xiang;
Lam, Jacky W. Y.;
Tang, Ben Zhong

Publication type:

Article

Activating Molybdenum Peroxide Scissors for Converting Polyamide Plastic into Low Carbon Alcohols.

Published in:

Angewandte Chemie, 2025, v. 137, n. 21, p. 1, doi. 10.1002/ange.202423766

By:

Kan, Miao;
Tao, Meng;
Zhuang, Weijie;
Wu, Shiqun;
Wan, Li;
Wang, Yong;
Zhang, Jinlong

Publication type:

Article

Effect of 9,9'-Bis(aryl)fluorene-modified Nanocellulose, Bamboo, and Bagasse Fibers on Mechanical Properties of Various Polymer Composites.

Published in:

BioResources, 2025, v. 20, n. 2, p. 4136, doi. 10.15376/biores.20.2.4136-4151

By:

Takumi Takeuchi;
Luengrojanakul, Panuwat;
Hiroshi Ito;
Rimdusit, Sarawut;
Shibata, Shinichi

Publication type:

Article

Parametric study of microporous nanofiber support and thin-film composite membranes for remediation of saline water.

Published in:

Journal of Industrial Textiles, 2025, p. 1, doi. 10.1177/15280837251341517

By:

Yalcinkaya, Fatma;
Kumar Veeramuthu, Vipin;
Yalcinkaya, Baturalp;
Siekierka, Anna;
Kohout, Michal;
Čížek, Jan;
Izak, Pavel

Publication type:

Article

Analytical investigation of self-heating phenomenon of polymers considering frequency, liquid ageing and molecular-chain motion.

Published in:

Journal of Polymer Research, 2025, v. 32, n. 4, p. 1, doi. 10.1007/s10965-025-04385-1

By:

Bourgogne, Quentin C. P.

Publication type:

Article

Effect of functionalized graphene on mechanical and rheological properties of melt processed polyamide 6 nanocomposites.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6696, doi. 10.1002/pc.29389

By:

Gholizadeh, Armin;
Babaei, Amir;
Haji Abdolrasouli, Mehdi

Publication type:

Article

Additive manufacturing of a polyamide 12 and silica nanocomposite: A route for the reusability of a thermoplastic selective laser sintering powder.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 5964, doi. 10.1002/pc.29334

By:

Kaba, Onur;
Shah, Asma Tufail;
Dudaško, Dominik;
Jain, Nishant;
Bertz, Tobias;
Görke, Oliver;
Gurlo, Aleksander

Publication type:

Article

An Approach to Model the Melt Displacement and Temperature Profiles During the Laser Through-Transmission Welding of Thermoplastics.

Published in:

Polymer Engineering & Science, 2006, v. 46, n. 11, p. 1565, doi. 10.1002/pen.20638

By:

Potente, H.;
Fiegler, G.;
Haferkamp, H.;
Fargas, M.;
von Busse, A.;
Bunte, J.

Publication type:

Article

Preparation of Microencapsulated Red Phosphorus Through Melamine Cyanurate Self-Assembly and Its Performance in Flame Retardant Polyamide 6.

Published in:

Polymer Engineering & Science, 2006, v. 46, n. 11, p. 1548, doi. 10.1002/pen.20627

By:

Yuan Liu;
Qi Wang

Publication type:

Article

Melt Processing Effects on the Structure and Mechanical Properties of PA-6/Clay Nanocomposites.

Published in:

Polymer Engineering & Science, 2006, v. 46, n. 8, p. 1094, doi. 10.1002/pen.20578

By:

Borse, Nitin K.;
Kamal, Musa R.

Publication type:

Article

Influence of Melt-Blending Conditions on Structural, Rheological, and Interfacial Properties of Polyamide-12 Layered Silicate Nanocomposites.

Published in:

Polymer Engineering & Science, 2006, v. 46, n. 8, p. 986, doi. 10.1002/pen.20587

By:

Médéric, Pascal;
Razafinimaro, Tolotrahasina;
Thierry Aubry

Publication type:

Article

Crystallization and Thermal Behavior of Microcellular Injection-Molded Polyamide-6 Nanocomposites.

Published in:

Polymer Engineering & Science, 2006, v. 46, n. 7, p. 904, doi. 10.1002/pen.20558

By:

Mingjun Yuan;
Lih-Sheng Turng;
Caulfield, Daniel F.

Publication type:

Article

Preparation and Characterization of New Optically Active Poly(amide-imide)s Derived from N,N-(4,4'- Oxydiphthaloyl)-bis-(s)-(+)-valine Diacid Chloride and Aromatic Diamines.

Published in:

Polymer Engineering & Science, 2006, v. 46, n. 4, p. 558, doi. 10.1002/pen.20490

By:

Mallakpour, Shadpour;
Kowsari, Elaheh

Publication type:

Article

Production of Electrically Conductive Networks in Immiscible Polymer Blends by Chaotic Mixing.

Published in:

Polymer Engineering & Science, 2006, v. 46, n. 1, p. 19, doi. 10.1002/pen.20445

By:

Dharaiya, Dhawal P.;
Jana, Sadhan C.;
Lyuksyutov, Sergei F.

Publication type:

Article

The Preparation and Properties of Compatibilized Nylon 6/ABS Blends Using Functionalized Polybutadiene. Part I: Impact Properties.

Published in:

Polymer Engineering & Science, 2005, v. 45, n. 11, p. 1461, doi. 10.1002/pen.20428

By:

S.-M. Lai;
Y.-C. Liao;
T.-W. Chen

Publication type:

Article

Effects of Titanate Coupling Agent on the Properties of Mica-Reinforced Nylon-6 Composites.

Published in:

Polymer Engineering & Science, 2005, v. 45, n. 11, p. 1479, doi. 10.1002/pen.20426

By:

Bose, Suryasarathi;
Mahanwar, P.A.

Publication type:

Article

Description of the Dynamic Moduli of Poly(trimethylene terephthalate)/Polyamide-12 Blends in Molten State.

Published in:

Polymer Engineering & Science, 2005, v. 45, n. 10, p. 1401, doi. 10.1002/pen.20413

By:

Asadinezhad, A.;
Yavari, A.;
Jafari, S. H.

Publication type:

Article

Nucleation Effect of Polyamide on Polyoxymethylene.

Published in:

Polymer Engineering & Science, 2005, v. 45, n. 8, p. 1174, doi. 10.1002/pen.20377

By:

Youliang Hu;
Lin Ye

Publication type:

Article

Microstructure and Crystallography in Microcellular Injection-Molded Polyamide-6 Nanocomposite and Neat Resin.

Published in:

Polymer Engineering & Science, 2005, v. 45, n. 1, p. 52, doi. 10.1002/pen.20229

By:

Chandra, Alexander;
Gong, Shaoqin;
Yuan, Mingjun;
Lih-Sheng Turng;
Gramann, Paul;
Cordes, Holger

Publication type:

Article

White Spirit Permeation Resistance of Polyethylene, Polyethylene/Modified Polyamide, and Polyethylene/Blends of Modified Polyamide and Ethylene Vinyl Alcohol Bottles.

Published in:

Polymer Engineering & Science, 2005, v. 45, n. 1, p. 25, doi. 10.1002/pen.20226

By:

Yeh, Jen-Taut;
Shyh-Shiuan Huang;
Heng-Yi Chen

Publication type:

Article

The Structure and Properties of PA6/MMT Nanocomposites Prepared by Melt Compounding.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 11, p. 2070, doi. 10.1002/pen.20211

By:

Wu Shishan;
Jiang Dingjun;
Ouyang Xiaodong;
Wu Fen;
Shen Jian

Publication type:

Article

Injection Moldability and Properties of Compatibilized PA6/LDPE Blends.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 9, p. 1732, doi. 10.1002/pen.20174

By:

Canfora, L.;
Filippi, S.;
La Mantia, F.P.

Publication type:

Article

Influence of Ionometric Compatibilizers on the Morphology and Properties of Amorphous Polyester/Polyamide Blends.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 9, p. 1721, doi. 10.1002/pen.20173

By:

Gemeinhardt, Gregory C.;
Moore, Ashley A.;
Moore, Robert B.

Publication type:

Article

Essential Work of Fracture of Rubber-Modified Polyamide 6 in Impact.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 9, p. 1707, doi. 10.1002/pen.20171

By:

Lievana, Emiliano;
Bernal, Celina;
Frontini, Patricia

Publication type:

Article

Structure and Mechanical Properties of Polyamide-6,6/Poly(Ethylene Terephthalate) Blends.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 8, p. 1405, doi. 10.1002/pen.20136

By:

Retolaza, A.;
Eguiazábal, J. I.;
Nazábal, J.

Publication type:

Article

Melt Processing of PA-66/Clay, HDPE/CIay and HDPEIPA-66/CIay Nanocomposites.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 6, p. 1152, doi. 10.1002/pen.20108

By:

Mehrabzadeh, Mahmood;
Kamal, Musa R.

Publication type:

Article

Hybrid Organic Inorganic Nylon-6/SiO<sub>2</sub> Nanocomposites: Transport Properties.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 7, p. 1240, doi. 10.1002/pen.20119

By:

Gracía, Monserrat;
Barsema, Jonathan;
Galindo, Ramon E.;
Cangialosi, Daniele;
Garcia-Turiel, Javier;
van Zyl, Werner E.;
Verweij, Henk;
Blank, Dave H.

Publication type:

Article

Non-Isothermal Crytallization Kinetics of Polyamide 1010/Montmorillonite Nanocomposite.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 5, p. 861, doi. 10.1002/pen.20077

By:

Zengjun Liu;
Deyue Yan

Publication type:

Article

Vibration Welding of Nylon 6 to Nylon 66.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 4, p. 760, doi. 10.1002/pen.20068

By:

Bates, P.J.;
Dyck, C.;
Osti, M.

Publication type:

Article

Reactive Blending of Functionalized Polypropylene and Polyamide 6: In situ Polymerization and In Situ Compatibilization.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 4, p. 648, doi. 10.1002/pen.20059

By:

Teng, Jing;
Otaigbe, Joshua U.;
Taylor, Eric P.

Publication type:

Article

Structural Organization and Drawability in Polyamide Blends.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 2, p. 261, doi. 10.1002/pen.20025

By:

Persyn, O.;
Miri, V.;
Lefebvre, J. M.;
Depecker, C.;
Gors, C.;
Strokes, A.

Publication type:

Article

Biaxial Deformation of Polyamide-6: Assessment of Orientation by Means of Infrared Trichroism.

Published in:

Polymer Engineering & Science, 2004, v. 44, n. 2, p. 231, doi. 10.1002/pen.20022

By:

Cole, K. C.;
Depecker, C.;
Jutigny, M.;
Lefebvre, J. -M.;
Krawczak, P.

Publication type:

Article

Study on Composition and Characteristics of Maleated Ethylene-Octene Copolymer Prepared by Reactive Extrusion on the Morphology and Properties of Polyamide 6/Ethylene-Octene Copolymer Blends.

Published in:

Polymer Engineering & Science, 2003, v. 43, n. 2, p. 317, doi. 10.1002/pen.10027

By:

Premphet-Sirisinha, K.;
Chalearmthitipa, S.

Publication type:

Article

Characterization of Monopolymer Blend of Virgin and Recycled Polyamide 6.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 12, p. 2412, doi. 10.1002/pen.11127

By:

Scaffaro, R.;
La Mantia, F.P.

Publication type:

Article

Carboxyl Terminated Polyamide 12 Chain Extension by Reactive Extrusion Using a Dioxazoline Coupling Agent. Part II: Effects of Extrusion Conditions.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 12, p. 2317, doi. 10.1002/pen.11118

By:

Chalamet, Yvan;
Taha, Mohamed;
Berzin, Françoise;
Vergnes, Bruno

Publication type:

Article

Toughness of Nanoscale and Multiscale Polyamide-6,6 Composites.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 9, p. 1872, doi. 10.1002/pen.11080

By:

Nair, Shanti V.;
Goettler, Lloyd A.;
Lysek, Bruce A.

Publication type:

Article

Monitoring the Evolution of the Properties of PA-6/EPM-g-MA Blends in a Twin-Screw Extruder.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 10, p. 2032, doi. 10.1002/pen.11094

By:

Machado, A.V.;
van Duin, M.;
Covas, J.A.

Publication type:

Article

The Role of Crystallinity and Reinforcement in the Mechanical Behavior of Polyamide-6/Clay Nanocomposites.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 9, p. 1897, doi. 10.1002/pen.11082

By:

Bureau, M.N.;
Denault, J.;
Cole, K.C.;
Enright, G.D.

Publication type:

Article

The Effect of Pressure and Clay on the Crystallization Behavior and Kinetics of Polyamide-6 in Nanocomposites.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 9, p. 1883, doi. 10.1002/pen.11081

By:

Kamal, M.R.;
Borse, N.K.;
Garcia-Rejon, A.

Publication type:

Article

Development of Orientation and Mechanical Properties of Extrusion Cast Polyamide 11 Films in Biaxial Stretching Process.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 5, p. 889, doi. 10.1002/pen.10999

By:

Sangkeun Rhee;
White, James L.

Publication type:

Article

Synthesis and Properties of New Soluble Poly(amide-imide-imide)s.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 6, p. 1220, doi. 10.1002/pen.11025

By:

Chin-Ping Yang;
Ruei-Shin Chen;
Chi-Shu Wei

Publication type:

Article

Chemical Modification of Polyurethane for Two-Component Injection Molding.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 4, p. 859

By:

Bráuer, M.;
Hupfter, B.;
Nagel, J.;
Lehmann, D.

Publication type:

Article

Structure and Mechanical Properties of Blends of an Amorphous Polyamide and a Liquid Crystalline Polymer.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 2, p. 413

By:

Garcí, M.;
Eguiazábal, J.;
Nazábal, J.

Publication type:

Article

Investigation of Structure Development in Polyamide 11 and Polyamide 12 Tubular Film Extrusion.

Published in:

Polymer Engineering & Science, 2002, v. 42, n. 1, p. 134, doi. 10.1002/pen.10934

By:

Rhee, Sangkeun;
White, James L.

Publication type:

Article

The Vibration and Hot-Tool Welding of Polyamides.

Published in:

Polymer Engineering & Science, 2001, v. 41, n. 8, p. 1427, doi. 10.1002/pen.10842

By:

Stokes, Vijay K.

Publication type:

Article

Solid-Phase Preparation of Ultra-Fine PA6 Powder Through Pan-Milling.

Published in:

Polymer Engineering & Science, 2001, v. 41, n. 7, p. 1187, doi. 10.1002/pen.10820

By:

Chen, Zhe;
Liu, Changsheng;
Wang, Qi

Publication type:

Article

Fusion Bonding of Polyamide 12.

Published in:

Polymer Engineering & Science, 2001, v. 41, n. 5, p. 890, doi. 10.1002/pen.10787

By:

Zanetto, J. E.;
Plummer, C. J. G.;
Bourban, P.-E.;
Manson, J.-A. E.

Publication type:

Article

Weldline Morphology of Injection Molded Modified Poly(phenylene-oxide)/Polyamide-6 Blends.

Published in:

Polymer Engineering & Science, 2001, v. 41, n. 3, p. 554, doi. 10.1002/pen.10752

By:

Son, Younggon;
Ahn, Kyung Hyun

Publication type:

Article

In Situ Fibrillar Reinforced PET/PA-6/PA-66 Blend.

Published in:

Polymer Engineering & Science, 2001, v. 41, n. 2, p. 192, doi. 10.1002/pen.10721

By:

Evstatiev, M.;
Schultz, J.M.

Publication type:

Article

The Crystallization Kinetics of Polyamide 66 in Non-isothermal and Isothermal Conditions: Effect of Nucleating Agent and Pressure.

Published in:

Polymer Engineering & Science, 2000, v. 40, n. 9, p. 2058, doi. 10.1002/pen.11338

By:

Won, J.C.;
Fulchiron, R.

Publication type:

Article