Works matching DE "PLASTIC properties of metals"
Results: 106
Analyses of route Bc equal channel angular pressing and post-equal channel angular pressing behavior by the finite element method.
- Published in:
- Journal of Materials Science, 2010, v. 45, n. 17, p. 4682, doi. 10.1007/s10853-010-4469-5
- By:
- Publication type:
- Article
Dislocation evolution in interstitial-free steel during constant and variable amplitude testing.
- Published in:
- Journal of Materials Science, 2010, v. 45, n. 7, p. 1809, doi. 10.1007/s10853-009-4163-7
- By:
- Publication type:
- Article
Strain rate effects in the ultrafine grain and nanocrystalline regimes—influence on some constitutive responses.
- Published in:
- Journal of Materials Science, 2007, v. 42, n. 5, p. 1709, doi. 10.1007/s10853-006-0700-9
- By:
- Publication type:
- Article
The multiaxial yield behaviour of an aluminium alloy foam.
- Published in:
- Journal of Materials Science, 2005, v. 40, n. 15, p. 4005, doi. 10.1007/s10853-005-1916-9
- By:
- Publication type:
- Article
Analytic description of the formation of pores under conditions of steady-state creep of metals.
- Published in:
- Strength of Materials, 2007, v. 39, n. 1, p. 74, doi. 10.1007/s11223-007-0010-8
- By:
- Publication type:
- Article
Evaluation of the high-density pulse current effect on the plastic strain rate in metals.
- Published in:
- Strength of Materials, 2006, v. 38, n. 2, p. 183, doi. 10.1007/s11223-006-0030-9
- By:
- Publication type:
- Article
The Influence of Elastoplastic Deformation on the Dislocation Structure of 15Kh2MFA Steel.
- Published in:
- Strength of Materials, 2003, v. 35, n. 6, p. 562, doi. 10.1023/B:STOM.0000013606.21409.af
- By:
- Publication type:
- Article
Deformation-Strength Relationships in Short-Term Tension of Heat-Resistant Materials.
- Published in:
- Strength of Materials, 2003, v. 35, n. 5, p. 484, doi. 10.1023/B:STOM.0000004536.98904.2f
- By:
- Publication type:
- Article
Strain Hardening of Initially Isotropic Metals under Loading along Slightly Curved Trajectories.
- Published in:
- Strength of Materials, 2003, v. 35, n. 3, p. 290, doi. 10.1023/A:1024616922912
- By:
- Publication type:
- Article
Creep properties of a fiber-reinforced magnesium alloy.
- Published in:
- Journal of Materials Science, 2004, v. 39, n. 5, p. 1647
- By:
- Publication type:
- Article
A study of the strength of P/M 6061Al and composites during high strain rate superplastic deformation.
- Published in:
- Journal of Materials Science, 2003, v. 38, n. 11, p. 2505, doi. 10.1023/A:1023973622567
- By:
- Publication type:
- Article
Effects of Fabrication, Finishing, and Polishing Procedures on Preload in Prostheses Using Conventional 'Gold' and Plastic Cylinders.
- Published in:
- International Journal of Oral & Maxillofacial Implants, 1996, v. 11, n. 5, p. 589
- By:
- Publication type:
- Article
Stresses in cross-ply laminated circular cylinders of axially variable thickness.
- Published in:
- Acta Mechanica, 2006, v. 187, n. 1-4, p. 85, doi. 10.1007/s00707-006-0356-1
- By:
- Publication type:
- Article
Influence of Higher Speed Loading on the Damage of a Rigid Polyurethane Foam.
- Published in:
- Petroleum - Gas University of Ploiesti Bulletin, Technical Series, 2011, v. 63, n. 1, p. 177
- By:
- Publication type:
- Article
Reflection Band Control of Inverse Opal Film with Photoresponse Properties of Push-Pull Type Azobenzene LC Polymers.
- Published in:
- Research Letters in Materials Science, 2008, p. 1, doi. 10.1155/2008/962160
- By:
- Publication type:
- Article
Influence of High-Frequency Micro-Forging on Microstructure and Properties of 304 Stainless Steel Fabricated by Laser Rapid Prototyping.
- Published in:
- Steel Research International, 2013, v. 84, n. 9, p. 870, doi. 10.1002/srin.201200259
- By:
- Publication type:
- Article
Validation of a Model of Plastic Deformation of Niobium Microalloyed Steels in the Two-Phase Temperature Region.
- Published in:
- Steel Research International, 2012, v. 83, n. 8, p. 743, doi. 10.1002/srin.201100248
- By:
- Publication type:
- Article
In-Situ Study of the Microstructure Development in a CrMnNi TRIP Steel During Plastic Deformation.
- Published in:
- Steel Research International, 2011, v. 82, n. 9, p. 998, doi. 10.1002/srin.201100088
- By:
- Publication type:
- Article
Warm forming of stainless steel sheet.
- Published in:
- Archives of Civil & Mechanical Engineering (Oficyna Wydawnicza Politechniki Wroclawskiej), 2010, v. 10, n. 3, p. 85, doi. 10.1016/S1644-9665(12)60034-X
- Publication type:
- Article
Electromigration-Induced Plasticity: Texture Correlation and Implications for Reliability Assessment.
- Published in:
- Journal of Electronic Materials, 2009, v. 38, n. 3, p. 379, doi. 10.1007/s11664-008-0602-5
- By:
- Publication type:
- Article
Dual phase versus TRIP strip steels: comparison of dynamic properties for automotive crash performance.
- Published in:
- Materials Science & Technology, 2007, v. 23, n. 4, p. 423, doi. 10.1179/174328407X168937
- By:
- Publication type:
- Article
Predicting the strain hardening characteristics of ageing alloys under combined loading.
- Published in:
- International Applied Mechanics, 2007, v. 43, n. 6, p. 683, doi. 10.1007/s10778-007-0067-x
- By:
- Publication type:
- Article
Axisymmetric thermoelastoplastic stress-strain state of transversely isotropic laminated shells.
- Published in:
- International Applied Mechanics, 2006, v. 42, n. 6, p. 669, doi. 10.1007/s10778-006-0134-8
- By:
- Publication type:
- Article
NOTES ON STRAIN GRADIENT PLASTICITY:: FINITE STRAIN COVARIANT MODELLING AND GLOBAL EXISTENCE IN THE INFINITESIMAL RATE-INDEPENDENT CASE.
- Published in:
- Mathematical Models & Methods in Applied Sciences, 2009, v. 19, n. 2, p. 307, doi. 10.1142/S0218202509003449
- By:
- Publication type:
- Article
Polarisation singularities of optical beam propagating in imperfect quartz crystals.
- Published in:
- Ukrainian Journal of Physical Optics, 2012, v. 13, n. 4, p. 204, doi. 10.3116/16091833/13/4/204/2012
- By:
- Publication type:
- Article
From Modeling of Plasticity in Single-Crystal Superalloys to High-Resolution X-rays Three-Crystal Diffractometer Peaks Simulation.
- Published in:
- Metallurgical & Materials Transactions. Part A, 2016, v. 47, n. 12, p. 5783, doi. 10.1007/s11661-016-3793-z
- By:
- Publication type:
- Article
Effect of the mean-stress dependence of yield conditions on residual stresses and strains.
- Published in:
- Doklady Physics, 2011, v. 56, n. 5, p. 279, doi. 10.1134/S1028335811050065
- By:
- Publication type:
- Article
Perfect rigid-plastic spreading of an asymptotically thin cylindrical layer.
- Published in:
- Doklady Physics, 2009, v. 54, n. 11, p. 516, doi. 10.1134/S102833580911010X
- By:
- Publication type:
- Article
FORMABILITY OF THIN SHEETS FROM ALUMINUM ALLOYS.
- Published in:
- Advances in Science & Technology Research Journal, 2016, v. 10, n. 32, p. 248, doi. 10.12913/22998624/65759
- By:
- Publication type:
- Article
DYNAMIC FRACTURE CRITERIA EVALUATION OF BRIDGE STRUCTURAL STEEL.
- Published in:
- Baltic Journal of Road & Bridge Engineering (Baltic Journal of Road & Bridge Engineering), 2011, v. 6, n. 2, p. 91, doi. 10.3846/bjrbe.2011.12
- By:
- Publication type:
- Article
Yield condition for circular cylindrical shells made of a fiber-reinforced composite.
- Published in:
- Mechanics of Composite Materials, 2006, v. 42, n. 5, p. 459, doi. 10.1007/s11029-006-0056-x
- By:
- Publication type:
- Article
Influence of lead and Pb−Bi eutectic melts on the mechanical properties of 20Kh13 ferritic-martensitic steel.
- Published in:
- Materials Science, 2012, v. 48, n. 3, p. 308, doi. 10.1007/s11003-012-9507-9
- By:
- Publication type:
- Article
Influence of temperature on the impact toughness and dynamic crack resistance of 25Kh1M1F steel.
- Published in:
- Materials Science, 2011, v. 46, n. 4, p. 568, doi. 10.1007/s11003-011-9325-5
- By:
- Publication type:
- Article
Revisiting the Fundamentals and Capabilities of the Stack Compression Test.
- Published in:
- Experimental Mechanics, 2011, v. 51, n. 9, p. 1565, doi. 10.1007/s11340-011-9480-5
- By:
- Publication type:
- Article
A Review of Fatigue Behavior in Nanocrystalline Metals.
- Published in:
- Experimental Mechanics, 2010, v. 50, n. 1, p. 5, doi. 10.1007/s11340-009-9301-2
- By:
- Publication type:
- Article
A simple approach for characterizing the performance of metallic tubular adhesively-bonded joints under torsion loading.
- Published in:
- Journal of Adhesion Science & Technology, 2007, v. 21, n. 16, p. 1613, doi. 10.1163/156856107782793203
- By:
- Publication type:
- Article
DEFORMABILITY OF MARTENSITIC STAINLESS STEEL (grade X46Cr13) BY HOT TORSION.
- Published in:
- Acta Technica Corviniensis - Bulletin of Engineering, 2019, v. 12, n. 2, p. 209
- By:
- Publication type:
- Article
FINITE ELEMENT SIMULATION OF PORE CLOSING DURING CYLINDER UPSETTING.
- Published in:
- International Journal of Modern Physics B: Condensed Matter Physics; Statistical Physics; Applied Physics, 2008, v. 22, n. 31/32, p. 5768, doi. 10.1142/S0217979208051145
- By:
- Publication type:
- Article
INFLUENCE OF THE STRAIN RATE ON THE MECHANICAL AND TECHNOLOGICAL PROPERTIES OF STEEL SHEETS.
- Published in:
- Metalurgija, 2010, v. 49, n. 4, p. 317
- By:
- Publication type:
- Article
Construction of Stess-Strain Curves for Brittle Materials by Indentation in a Wide Temperature Range.
- Published in:
- Science of Sintering, 2007, v. 39, n. 1, p. 67, doi. 10.2298/SOS0701067M
- By:
- Publication type:
- Article
Relationship between composition, structure, and mechanical properties of a condensed composite of copper-tungsten system.
- Published in:
- Strength of Materials, 2011, v. 43, n. 4, p. 426, doi. 10.1007/s11223-011-9312-y
- By:
- Publication type:
- Article
Strain-life curves of steels and methods for determining the curve parameters. Part 2. Methods based on the use of artificial neural networks.
- Published in:
- Strength of Materials, 2011, v. 43, n. 1, p. 1, doi. 10.1007/s11223-011-9262-4
- By:
- Publication type:
- Article
Mathematical simulation of the plastic deformation of crystalline materials with a nanodispersed hardening phase.
- Published in:
- Russian Physics Journal, 2007, v. 50, n. 11, p. 1092, doi. 10.1007/s11182-007-0160-y
- By:
- Publication type:
- Article
Evolution of the structural and phase states of a Ti-6Al-4V alloy in forming submicrocrystalline structure with the use of temporary hydrogenation.
- Published in:
- Russian Physics Journal, 2006, v. 49, n. 4, p. 442, doi. 10.1007/s11182-006-0123-8
- By:
- Publication type:
- Article
Current pattern of plastic deformation stages.
- Published in:
- Russian Physics Journal, 2004, v. 47, n. 8, p. 882, doi. 10.1007/s11182-005-0007-3
- By:
- Publication type:
- Article
THE EFFECT OF VARIATION IN YIELD STRESS ON SLIP-LINE FIELD SOLUTIONS.
- Published in:
- International Journal of Production Research, 1966, v. 5, n. 3, p. 249
- By:
- Publication type:
- Article
THE EFFECT OF PRESSURE ON THE DUCTILITY OF THIN SHEET SUBJECTED TO SOME SIMPLE FORMING PROCESSES.
- Published in:
- International Journal of Production Research, 1964, v. 3, n. 4, p. 341, doi. 10.1080/00207546408943067
- By:
- Publication type:
- Article
Effect of trailing heat sink on residual stresses and welding distortion in friction stir welding Al sheets.
- Published in:
- Science & Technology of Welding & Joining, 2011, v. 16, n. 5, p. 453, doi. 10.1179/1362171811Y.0000000015
- By:
- Publication type:
- Article
Prediction of welding deformations of large stiffened panels using average plastic strain method.
- Published in:
- Science & Technology of Welding & Joining, 2011, v. 16, n. 3, p. 227, doi. 10.1179/1362171811Y.0000000004
- By:
- Publication type:
- Article
Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds.
- Published in:
- Science & Technology of Welding & Joining, 2011, v. 16, n. 3, p. 279, doi. 10.1179/1362171811Y.0000000003
- By:
- Publication type:
- Article