Found: 228
Select item for more details and to access through your institution.
Scuffing failure analysis based on a multiphysics coupling model and experimental verification.
- Published in:
- Friction (2223-7704), 2024, v. 12, n. 6, p. 1214, doi. 10.1007/s40544-023-0802-2
- By:
- Publication type:
- Article
Impact of Piston Ring Gap on the Thermodynamic Performance of Gasoline Direct Injection Engines.
- Published in:
- International Journal of Heat & Technology, 2024, v. 42, n. 2, p. 603, doi. 10.18280/ijht.420227
- By:
- Publication type:
- Article
Influence of Liner Surface with Parameterized Pit Texture on the Friction Characteristics of Piston Rings.
- Published in:
- Processes, 2024, v. 12, n. 3, p. 572, doi. 10.3390/pr12030572
- By:
- Publication type:
- Article
Tribological Analysis and Optimization of Ring-Cylinder Couple Coated with Different Materials.
- Published in:
- Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 2, p. 2553, doi. 10.1007/s13369-023-08241-6
- By:
- Publication type:
- Article
Characterization of PPS Piston and Packing Ring Materials for High-Pressure Hydrogen Applications.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 3, p. 412, doi. 10.3390/polym16030412
- By:
- Publication type:
- Article
Design Method of the Stroke Ring Based on Deformation Pre-Compensation.
- Published in:
- Actuators, 2024, v. 13, n. 1, p. 22, doi. 10.3390/act13010022
- By:
- Publication type:
- Article
Intelligent Fault Diagnosis of Scuffed Piston Rings Using Vibration Signature Analysis.
- Published in:
- Journal of Vibration Engineering & Technologies, 2024, v. 12, n. 1, p. 1019, doi. 10.1007/s42417-023-00891-y
- By:
- Publication type:
- Article
Deterministic Simulation of Surface Textures for the Piston Ring/Cylinder Liner System in a Free Piston Linear Engine.
- Published in:
- Lubricants (2075-4442), 2024, v. 12, n. 1, p. 12, doi. 10.3390/lubricants12010012
- By:
- Publication type:
- Article
Thermohydrodynamic Lubrication Characteristics of Piston Rings in Diesel Engine Considering Transient Heat Transfer under the Parameterized Surface Texture of Cylinder Liners.
- Published in:
- Energies (19961073), 2023, v. 16, n. 24, p. 7924, doi. 10.3390/en16247924
- By:
- Publication type:
- Article
Frictional Losses of Ring Pack in SI and HCCI Engine.
- Published in:
- Energies (19961073), 2023, v. 16, n. 24, p. 8096, doi. 10.3390/en16248096
- By:
- Publication type:
- Article
Fullerene Oil Tribology in Compression Piston Rings under Thermal Considerations.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 12, p. 505, doi. 10.3390/lubricants11120505
- By:
- Publication type:
- Article
An experimental and analytical investigation of the evaporation characteristics of engine oil film.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2023, v. 148, n. 21, p. 12037, doi. 10.1007/s10973-023-12474-w
- By:
- Publication type:
- Article
Influence of Artificially Altered Engine Oil on Tribofilm Formation and Wear Behaviour of Grey Cast Cylinder Liners.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 11, p. 476, doi. 10.3390/lubricants11110476
- By:
- Publication type:
- Article
Bionic Design and Optimization of the Wear-Resistant Structure of Piston Rings in Internal Combustion Engines.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 11, p. 484, doi. 10.3390/lubricants11110484
- By:
- Publication type:
- Article
Research on the wear of novel sets of piston rings in a diesel locomotive engine.
- Published in:
- Combustion Engines (2300-9896), 2023, v. 195, n. 4, p. 56, doi. 10.19206/CE-168518
- By:
- Publication type:
- Article
Laser texturing of piston ring for tribological performance improvement.
- Published in:
- Friction (2223-7704), 2023, v. 11, n. 10, p. 1895, doi. 10.1007/s40544-022-0723-5
- By:
- Publication type:
- Article
A Comparison of Hydrogen and Gasoline Piston Ring Simulations.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 10, p. 444, doi. 10.3390/lubricants11100444
- By:
- Publication type:
- Article
活塞环/缸套摩擦副表面织构优化设计方法.
- Published in:
- Lubrication Engineering (0254-0150), 2023, v. 48, n. 9, p. 133, doi. 10.3969/j.issn.0254-0150.2023.09.016
- By:
- Publication type:
- Article
An Analysis of the Metal Connection Using Metallographic Investigation.
- Published in:
- Metallurgist, 2023, v. 67, n. 5/6, p. 849, doi. 10.1007/s11015-023-01570-9
- By:
- Publication type:
- Article
DEVELOPMENT OF QUEUE MANAGEMENT MODEL FOR EFFECTIVE SERVICE DELIVERY IN AUTOMOBILE REPAIR SHOPS.
- Published in:
- Nigerian Journal of Technology, 2023, v. 42, n. 3, p. 339, doi. 10.4314/njt.v42i3.6
- By:
- Publication type:
- Article
Bestimmung der oberen Temperaturgrenze von Schmierstoffen gegen adhäsives Versagen.
- Published in:
- Tribologie und Schmierungstechnik, 2023, v. 70, n. 4/5, p. 40, doi. 10.24053/TuS-2023-0022
- By:
- Publication type:
- Article
Development of a New Measurement System for Piston Ring Friction Based on the Floating Liner Method.
- Published in:
- International Journal of Automotive Technology, 2023, v. 24, n. 4, p. 1205, doi. 10.1007/s12239-023-0098-2
- By:
- Publication type:
- Article
Investigation of Thermal Conductivity and Wear Resistance in Bio-Inspired Pitted Pistons for Enhanced Performance in Drilling Mud Pumps.
- Published in:
- International Journal of Heat & Technology, 2023, v. 41, n. 4, p. 1007, doi. 10.18280/ijht.410422
- By:
- Publication type:
- Article
农用柴油机活塞环组机油消耗和窜气的灰色关联分析与预测.
- Published in:
- Transactions of the Chinese Society of Agricultural Engineering, 2023, v. 39, n. 15, p. 57, doi. 10.11975/j.issn.1002-6819.202305138
- By:
- Publication type:
- Article
Time‐continuous and time‐discontinuous space‐time finite elements for advection‐diffusion problems.
- Published in:
- International Journal for Numerical Methods in Engineering, 2023, v. 124, n. 14, p. 3117, doi. 10.1002/nme.7241
- By:
- Publication type:
- Article
Investigation of intake air temperature effect on co-combustion characteristics of NH<sub>3</sub>/gasoline in naturally aspirated high compression ratio engine with sub-chamber.
- Published in:
- Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-38883-3
- By:
- Publication type:
- Article
Positive Effect of Periodic Micropatterns on Compression Ring Friction.
- Published in:
- Advanced Engineering Materials, 2023, v. 25, n. 14, p. 1, doi. 10.1002/adem.202201708
- By:
- Publication type:
- Article
A NUMERICAL STUDY OF TWIN LAND OIL CONTROL RING HYDRODYNAMIC FRICTION IN INTERNAL COMBUSTION ENGINE.
- Published in:
- Journal of the Balkan Tribological Association, 2023, v. 29, n. 4, p. 607
- By:
- Publication type:
- Article
发动机缸孔椭圆开口偏置类抛物线微织构研究.
- Published in:
- Lubrication Engineering (0254-0150), 2023, v. 48, n. 7, p. 100, doi. 10.3969/j.issn.0254-0150.2023.07.015
- By:
- Publication type:
- Article
Effect of copper nanoparticle concentration on tribological performances of cylinder liner piston ring.
- Published in:
- Lubrication Science, 2023, v. 35, n. 4, p. 225, doi. 10.1002/ls.1634
- By:
- Publication type:
- Article
The Theory of the Surface Wettability Angle in the Formation of an Oil Film in Internal Combustion Piston Engines.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 11, p. 4092, doi. 10.3390/ma16114092
- By:
- Publication type:
- Article
A review on preparation process and tribological performance of coatings for internal combustion engine piston ring.
- Published in:
- Advances in Mechanical Engineering (Sage Publications Inc.), 2023, v. 15, n. 5, p. 1, doi. 10.1177/16878132231175752
- By:
- Publication type:
- Article
Coated Piston Ring Pack and Cylinder Liner Elastodynamics in Correlation to Piston Subsystem Elastohydrodynamic: Through FEA Modelling.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 5, p. 192, doi. 10.3390/lubricants11050192
- By:
- Publication type:
- Article
A Mixed Lubrication Model of Piston Rings on Cylinder Liner Contacts Considering Temperature-Dependent Shear Thinning and Elastic–Plastic Contact.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 5, p. 208, doi. 10.3390/lubricants11050208
- By:
- Publication type:
- Article
A study of torsional vibration attenuation in closed-loop crankshaft model using absorbers with cubic and quintic smooth nonlinearities.
- Published in:
- Nonlinear Dynamics, 2023, v. 111, n. 7, p. 6017, doi. 10.1007/s11071-022-08165-0
- By:
- Publication type:
- Article
Design, manufacturing, and testing of a laser textured piston ring surface reinforced with a CuCoBe–diamond composite by hot-pressing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 5/6, p. 2349, doi. 10.1007/s00170-023-10871-x
- By:
- Publication type:
- Article
Nonlinear dynamic behavior analysis of closed-loop self-excited crankshaft model using improved Newmark-β method.
- Published in:
- Nonlinear Dynamics, 2023, v. 111, n. 6, p. 5107, doi. 10.1007/s11071-022-08100-3
- By:
- Publication type:
- Article
Effects of Temperature on the Tribological Properties of Cylinder-Liner Piston Ring Lubricated with Different Oils.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 3, p. 115, doi. 10.3390/lubricants11030115
- By:
- Publication type:
- Article
Tribological Performance of a Composite Cold Spray for Coated Bores.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 3, p. 127, doi. 10.3390/lubricants11030127
- By:
- Publication type:
- Article
海工装备液压缸多重组合式密封结构设计与仿真分析.
- Published in:
- Lubrication Engineering (0254-0150), 2023, v. 48, n. 3, p. 90, doi. 10.3969/j.issn.0254-0150.2023.03.012
- By:
- Publication type:
- Article
Possibility of Marine Low-Speed Engine Piston Ring Wear Prediction during Real Operational Conditions.
- Published in:
- Energies (19961073), 2023, v. 16, n. 3, p. 1433, doi. 10.3390/en16031433
- By:
- Publication type:
- Article
Effect of Sliding on the Relation of Tribofilm Thickness and Wear.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 2, p. 72, doi. 10.3390/lubricants11020072
- By:
- Publication type:
- Article
温度对缸套-活塞环摩擦性能的影响.
- Published in:
- Lubrication Engineering (0254-0150), 2023, v. 48, n. 2, p. 39, doi. 10.3969/j.issn.0254-0150.2023.02.006
- By:
- Publication type:
- Article
Nonlinear Vibration Feature Recognition Method for Reciprocating Compressor Cylinder Based on VMD-Multifractal Spectrum.
- Published in:
- Shock & Vibration, 2023, v. 2023, p. 1, doi. 10.1155/2023/2504170
- By:
- Publication type:
- Article
Friction Reduction by Dimple Type Textured Cylinder Liners—An Experimental Investigation.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 2, p. 665, doi. 10.3390/ma16020665
- By:
- Publication type:
- Article
考虑贫油和高边界压力的发动机顶环-缸套润滑与承载性能分析.
- Published in:
- Lubrication Engineering (0254-0150), 2023, v. 48, n. 1, p. 14, doi. 10.3969/j.issn.0254-0150.2023.01.003
- By:
- Publication type:
- Article
涡轮增压发动机用 0W - 20 润滑油减摩性能研究.
- Published in:
- Lubrication Engineering (0254-0150), 2023, v. 48, n. 1, p. 19, doi. 10.3969/j.issn.0254-0150.2023.01.004
- By:
- Publication type:
- Article
New approach of model based detection of early stages of fuel injector failures.
- Published in:
- Maintenance & Reliability / Eksploatacja i Niezawodność, 2023, v. 25, n. 1, p. 56, doi. 10.17531/ein.2023.1.6
- By:
- Publication type:
- Article
Improving Tribological Performance of Piston Ring Steel Substrates by DLC/Nano-crystalline Diamond Coating.
- Published in:
- Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2022, v. 47, n. 12, p. 15441, doi. 10.1007/s13369-022-06660-5
- By:
- Publication type:
- Article
Structural Performance of Additively Manufactured Cylinder Liner—A Numerical Study.
- Published in:
- Energies (19961073), 2022, v. 15, n. 23, p. 8926, doi. 10.3390/en15238926
- By:
- Publication type:
- Article