Works about PERFORMANCE of tires

Results: 189

Study on Modified EBIR With Improving Filler Dispersion and Mechanical Properties of Filler‐Rubber Composites.

Published in:

Journal of Applied Polymer Science, 2025, v. 142, n. 19, p. 1, doi. 10.1002/app.56853

By:

Wang, Yixiao;
Zhu, Guangqian;
Hou, Xiaogeng;
Qin, Bao;
Wang, Keqiang;
Sui, Feifei;
Xu, Guangqiang;
Wang, Qinggang;
Hou, Hongbin;
Zhang, Liang

Publication type:

Article

Cellulose nanocrystal functionalized aramid nanofiber reinforced rubber compounds for tire tread application.

Published in:

Cellulose, 2022, v. 29, n. 14, p. 7735, doi. 10.1007/s10570-022-04716-1

By:

Jung, Jaehyun;
Sodano, Henry A.

Publication type:

Article

Optimizing Sustainability of Concrete Structures Using Tire-Derived Aggregates: A Performance Improvement Study.

Published in:

CivilEng, 2024, v. 5, n. 1, p. 30, doi. 10.3390/civileng5010002

By:

Younis, Zeinab A.;
Nazari, Maryam

Publication type:

Article

Fuzzy Logic Controller for Half Vehicle Active Suspension System: An Assessment on Ride Comfort and Road Holding.

Published in:

International Journal of Automotive Science & Technology, 2024, v. 8, n. 2, p. 179, doi. 10.30939/ijastech..1372001

By:

Yatak, Meral O.;
Hisar, Cagdas;
Sahin, Fatih

Publication type:

Article

橡胶模具水性氟树脂涂层防粘性能研究.

Published in:

Electroplating & Finishing, 2023, v. 42, n. 4, p. 50, doi. 10.19289/j.1004-227x.2023.04.009

By:

王旭;
刘志兰;
张秀丽;
徐秀芳;
吴永玲;
吴棣本

Publication type:

Article

Design, modeling, and analysis of a high performance piezoelectric energy harvester for intelligent tires.

Published in:

International Journal of Energy Research, 2019, v. 43, n. 10, p. 5199, doi. 10.1002/er.4441

By:

Esmaeeli, Roja;
Aliniagerdroudbari, Haniph;
Hashemi, Seyed Reza;
Alhadri, Muapper;
Zakri, Waleed;
Batur, Celal;
Farhad, Siamak

Publication type:

Article

Effects of Front Total Toe-In Angle on Tire Wear and Emissions for a Light-Duty Vehicle.

Published in:

Journal of Engineering (2314-4912), 2024, v. 2024, p. 1, doi. 10.1155/2024/5723254

By:

Das, Riton Kumer;
Hossain, Md. Abu Mowazzem;
Islam, Md. Tazul;
Banik, Sajal Chandra;
Hafez, Md. Golam

Publication type:

Article

An energy efficient intelligent torque vectoring approach based on fuzzy logic controller and neural network tire forces estimator.

Published in:

Neural Computing & Applications, 2021, v. 33, n. 15, p. 9171, doi. 10.1007/s00521-020-05680-2

By:

Parra, Alberto;
Zubizarreta, Asier;
Pérez, Joshué

Publication type:

Article

NUMERICAL ANALYSIS OF PARTIAL ABRASION OF THE STRADDLE-TYPE MONORAIL VEHICLE RUNNING TYRE.

Published in:

Transactions of FAMENA, 2017, v. 41, n. 1, p. 99, doi. 10.21278/TOF.41109

By:

Zixue Du;
Xiaoxia Wen;
Dayi Zhao;
Zhouzhou Xu;
Liang Chen

Publication type:

Article

Study of Effect of Contour Design on Radial Tire Performance.

Published in:

International Journal of Simulation: Systems, Science & Technology, 2015, v. 16, n. 3B, p. 11.1, doi. 10.5013/IJSSST.a.16.3B.11

By:

Guo-Lin WANG;
Yan-Tian SUN;
Chen LIANG

Publication type:

Article

Effect of bucket geometry, machine variables and fragmentation size on the performance of rubber tire loaders.

Published in:

Mining Engineering, 2022, v. 74, n. 3, p. 41, doi. 10.1007/s42461-021-00497-6

By:

Ur Rehman, Atta;
Awuah-Offei, Kwame

Publication type:

Article

Potential use of a novel composite zinc oxide as eco-friendly activator in Tire tread compound.

Published in:

Journal of Polymer Research, 2019, v. 26, n. 9, p. N.PAG, doi. 10.1007/s10965-019-1895-1

By:

Thaptong, Puchong;
Boonbumrung, Atip;
Jittham, Pairote;
Sae-oui, Pongdhorn

Publication type:

Article

An approach for large-scale gyroscopic eigenvalue problems with application to high-frequency response of rolling tires.

Published in:

Computational Mechanics, 2008, v. 41, n. 4, p. 503, doi. 10.1007/s00466-007-0206-6

By:

Brinkmeier, Maik;
Nackenhorst, Udo

Publication type:

Article

CHARACTERIZATION OF EFFECTIVE TIRE CONTACT AREA FOR VARIOUS TREAD PATTERNS.

Published in:

Instrumentation Science & Technology, 2014, v. 42, n. 1, p. 15, doi. 10.1080/10739149.2013.832291

By:

Muniandy, Ratnasamy;
Moazami, Danial;
Hamid, Hussain;
Hassim, Salihudin

Publication type:

Article

TIRE PERFORMANCE AFTER EXPLOSIVE DECOMPRESSION.

Published in:

Journal of Science of the Gen. Tadeusz Kosiuszko Military Academy of Land Forces, 2013, v. 169, n. 3, p. 134, doi. 10.5604/1731-8157.1115192

By:

MOTRYCZ, Grzegorz;
STRYJEK, Piotr;
EJSMONT, Jerzy;
KAŁWA, Henryk

Publication type:

Article

Investigating Temperature Effects on Mechanical Behavior of Rubber Compounds Embedded in Composite Structure of Pneumatic Tires.

Published in:

International Journal of Advanced Design & Manufacturing Technology, 2014, v. 7, n. 4, p. 19

By:

Golbakhshi, H.;
Namjoo, M.

Publication type:

Article

Fabrication of Pt-Loaded Catalysts Supported on the Functionalized Pyrolytic Activated Carbon Derived from Waste Tires for the High Performance Dehydrogenation of Methylcyclohexane and Hydrogen Production.

Published in:

Catalysts (2073-4344), 2022, v. 12, n. 2, p. 211, doi. 10.3390/catal12020211

By:

Ye, Hongli;
Wang, Tianci;
Liu, Shuangxi;
Zhang, Cui;
Cai, Youqiong

Publication type:

Article

Characterization of curing status of commercial tire compounds with vein graphite powder and its particle sizes—Experimental and computational study.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 28, p. 1, doi. 10.1002/app.55651

By:

Abeygunawardane, Gayan Aravinda;
Weragoda, Sampath;
Senevirathne, Nadun;
Liyanage, Eranga

Publication type:

Article

Effect of demineralized water on the silanization reaction and the performance properties of green tire tread compound.

Published in:

Journal of Applied Polymer Science, 2024, v. 141, n. 28, p. 1, doi. 10.1002/app.55650

By:

Neethirajan, Jeevanandham;
Natarajan, Tamil Selvan;
Mohanty, Tapas Rajan;
Ramakrishnan, S.;
Singha, Nikhil K.;
Naskar, Kinsuk

Publication type:

Article

Preparation and mechanical properties of natural rubber composites reinforced by modified molybdenum disulfide.

Published in:

Journal of Applied Polymer Science, 2023, v. 140, n. 29, p. 1, doi. 10.1002/app.54065

By:

Haq, Zaheer Ul;
Zia‐ul‐Haq, Muhammad;
Jiang, Yang;
Wang, Jinyuan;
Zhang, Yong

Publication type:

Article

Optimization of highly dispersible silica/carbon black hybrid filler ratio for tire tread based on solution‐ and emulsion‐styrene butadiene rubber.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 29, p. 1, doi. 10.1002/app.52608

By:

Thaptong, Puchong;
Sae‐Oui, Pongdhorn;
Jittham, Pairote;
Sirisinha, Chakrit

Publication type:

Article

A study on hydrocarbon resins as an advanced material for performance enhancement of radial passenger tyre tread compound.

Published in:

Journal of Applied Polymer Science, 2022, v. 139, n. 15, p. 1, doi. 10.1002/app.51950

By:

Shee, Biswajit;
Chanda, Jagannath;
Dasgupta, Mridul;
Sen, Amit Kumar;
Bhattacharyya, Sanjay Kumar;
Das Gupta, Saikat;
Mukhopadhyay, Rabindra

Publication type:

Article

Effect of conductive carbon black on electrical conductivity and performance of tire tread compounds filled with carbon black/silica hybrid filler.

Published in:

Journal of Applied Polymer Science, 2021, v. 138, n. 34, p. 1, doi. 10.1002/app.50855

By:

Thaptong, Puchong;
Jittham, Pairote;
Sae‐oui, Pongdhorn

Publication type:

Article

Design of convex‐hull bionic tire tread compounds and mechanism on collaborative improvement of wet resistance and wear resistance.

Published in:

Journal of Applied Polymer Science, 2021, v. 138, n. 20, p. 1, doi. 10.1002/app.50446

By:

Mao, Chunyu;
Lv, Xueman;
Yang, Xiaodong;
Yang, Zhuojuan;
Ma, Yunhai;
Lv, Shuwei

Publication type:

Article

Highly enhanced tire performance achieved by using combined carbon nanotubes and soybean oil.

Published in:

Journal of Applied Polymer Science, 2021, v. 138, n. 10, p. 1, doi. 10.1002/app.49945

By:

Kang, Chang‐Hwan;
Jung, Woo‐Bin;
Kim, Hak‐Joo;
Jung, Hee‐Tae

Publication type:

Article

Promoting the dispersibility of silica and interfacial strength of rubber/silica composites prepared by latex compounding.

Published in:

Journal of Applied Polymer Science, 2020, v. 137, n. 46, p. 1, doi. 10.1002/app.49526

By:

Sun, Ying;
Cheng, Zhimin;
Zhang, Ling;
Jiang, Haibo;
Li, Chunzhong

Publication type:

Article

Modeling of batch production of high vinyl styrene/butadiene copolymers for high performance tires.

Published in:

Journal of Applied Polymer Science, 2020, v. 137, n. 45, p. 1, doi. 10.1002/app.49415

By:

Rodriguez‐Guadarrama, Luis

Publication type:

Article

Stable ion bond for high damping, high wet resistance, and low rolling resistance high vinyl polybutadiene rubber‐based dicarboxylate ionomer.

Published in:

Journal of Applied Polymer Science, 2020, v. 137, n. 44, p. 1, doi. 10.1002/app.49374

By:

Yuan, Yuka;
Liu, Kai;
Wang, Zhaobo;
Liu, Yudong;
Hua, Jing

Publication type:

Article

Properties of tire tread compounds based on functionalized styrene butadiene rubber and functionalized natural rubber.

Published in:

Journal of Applied Polymer Science, 2020, v. 137, n. 20, p. 1, doi. 10.1002/app.48696

By:

Sirisinha, Chakrit;
Sae‐oui, Pongdhorn;
Suchiva, Krisda;
Thaptong, Puchong

Publication type:

Article

Analysis of Taxiing Performance of Single Strut Landing Gear Based on ISD.

Published in:

Mechanika, 2023, v. 29, n. 6, p. 486, doi. 10.5755/j02.mech.33571

By:

Yu WANG;
Changming ZHANG;
Peng WANG;
Xuan CAO;
Zhan GE

Publication type:

Article

Study on the Influence of the Center of Gravity of Fuel Cell City Bus on its Handling Characteristics.

Published in:

Mechanika, 2020, v. 26, n. 5, p. 416, doi. 10.5755/j01.mech.26.5.23590

By:

Yuezhen FAN;
Chuanchao DU;
Qingchun WANG

Publication type:

Article

Big bounce for rubber.

Published in:

2013

By:

Jagger, Anna

Publication type:

Opinion

Where rubber meets road.

Published in:

Chemistry & Industry, 2008, n. 3, p. 21

By:

Eisberg, Neil

Publication type:

Article

Predicting the mileage of motor vehicle tyres in mountainous service conditions.

Published in:

International Polymer Science & Technology, 2012, v. 39, n. 5, p. 27, doi. 10.1177/0307174X1203900507

By:

Gudkov, V. A.;
Tarnovskii, V. N.;
Ustarov, R. M.

Publication type:

Article

A multivariate multiple regression analysis of tire-road contact peak triaxial stress by using machine learning methods.

Published in:

Mechanics of Advanced Materials & Structures, 2023, v. 30, n. 1, p. 67, doi. 10.1080/15376494.2021.2008067

By:

Li, Xiangwen;
Guo, Minrui;
Zhou, Xinglin

Publication type:

Article

Structural design and characteristics of a non-pneumatic tire with honeycomb structure.

Published in:

Mechanics of Advanced Materials & Structures, 2022, v. 29, n. 25, p. 4066, doi. 10.1080/15376494.2021.1919800

By:

Zang, Liguo;
Wang, Xingyu;
Yan, Pengwei;
Zhao, Zhendong

Publication type:

Article

Evaluation of the high-temperature rheological performance of tire pyrolysis oil-modified bio-asphalt.

Published in:

International Journal of Pavement Engineering, 2022, v. 23, n. 11, p. 4007, doi. 10.1080/10298436.2021.1931200

By:

Al-Sabaeei, Abdulnaser M.;
Napiah, Madzlan B.;
Sutanto, Muslich H.;
Alaloul, Wesam S.;
Yusoff, Nur Izzi Md;
Khairuddin, Faridah Hanim;
Memon, Abdul Muhaimin

Publication type:

Article

Baseline rolling resistance for tires’ on-road fuel efficiency using finite element modeling.

Published in:

International Journal of Pavement Engineering, 2017, v. 18, n. 5, p. 424, doi. 10.1080/10298436.2015.1095298

By:

Hernandez, Jaime A.;
Al-Qadi, Imad L.;
Ozer, Hasan

Publication type:

Article

Influence of Carbon Black/Silica Hybrid Ratio on Properties of Passenger Car Tire Sidewall.

Published in:

Periodica Polytechnica: Chemical Engineering, 2022, v. 66, n. 1, p. 147, doi. 10.3311/PPch.18086

By:

Akaporn Limtrakul;
Pongdhorn Sae-Oui;
Manuchet Nillawong;
Chakrit Sirisinha

Publication type:

Article

Evaluation of vehicle running performance on ash-covered roads.

Published in:

Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-47122-8

By:

Nishizawa, Tatsuji;
Yoshimoto, Mitsuhiro;
Kubo, Tomohiro;
Honda, Ryo;
Nakada, Setsuya;
Kametani, Nobuko;
Ishimine, Yasuhiro;
Yamamoto, Shinya

Publication type:

Article

Analysis on Wheel--Ground Contact Load Characteristics of Unmanned Off-road Vehicles.

Published in:

Journal of Engineering Science & Technology Review, 2017, v. 10, n. 3, p. 97, doi. 10.25103/jestr.103.14

By:

Feng Ren;
Longhai Li;
Zhengying Jiang;
Tao Song;
Xun Gong;
Yaowu Shi;
Boliang Liu

Publication type:

Article

Analysis of Different Stripe Connectors for a Gabion Wall based on Woven Waste Tire Stripes.

Published in:

Civil Engineering Dimension, 2019, v. 21, n. 2, p. 66, doi. 10.9744/CED.21.2.66-69

By:

Apriyono, A.;
Sumiyanto;
Yanto;
Iswahyudi, S.;
Pamungkas, R. W.

Publication type:

Article

Extending the tire dynamic model range of operating conditions based on finite element method.

Published in:

Advances in Mechanical Engineering (Sage Publications Inc.), 2022, v. 14, n. 3, p. 1, doi. 10.1177/16878132221085454

By:

Ge, Yunfei;
Yan, Yifei;
Yan, Xiangzhen;
Meng, Zhaohong

Publication type:

Article

ARABA LASTİĞİNİN FARKLI İÇ BASINÇLAR ALTINDA 2 VE 3 BOYUTLU GERİLME ANALİZİ.

Published in:

Teknoloji, 2008, v. 11, n. 2, p. 145

By:

Karaku, Murat;
Çolakoğlu, Mehmet

Publication type:

Article

Evaluation of the effect of off-the-road tire air pressure setting on tire performance.

Published in:

International Journal of Mining, Reclamation & Environment, 2008, v. 22, n. 3, p. 237, doi. 10.1080/17480930701679459

By:

Jie Zhou;
Hall, Robert A.;
Fowler, Greg;
Huntingford, Ken

Publication type:

Article

A study on the viscoelastic behaviors of tire cords using dynamic mechanical analysis.

Published in:

Journal of Engineered Fabrics & Fibers (JEFF), 2021, v. 16, p. 1, doi. 10.1177/1558925020915195

By:

Tian, Liyong;
Wang, Di;
Su, Peng;
Wei, Qufu

Publication type:

Article

A study on the viscoelastic behaviors of tire cords using dynamic mechanical analysis.

Published in:

Journal of Engineered Fabrics & Fibers (JEFF), 2020, v. 15, n. 1, p. 1, doi. 10.1177/1558925020915195

By:

Liyong Tian;
Di Wang;
Peng Su;
Qufu Wei

Publication type:

Article

Comprehensive feasibility study for application of waste tire chips in enhancing the performance of shallow foundations.

Published in:

Environmental Science & Pollution Research, 2021, v. 28, n. 39, p. 55554, doi. 10.1007/s11356-021-14876-5

By:

Gill, Gourav;
Mittal, Ravi Kant;
Rawat, Sanket

Publication type:

Article

Effect of rubber type and accelerator content on polymer–filler interactions of silica‐reinforced vulcanizates.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 3, p. 1516, doi. 10.1002/pen.27106

By:

Jia, Weijie;
Lin, Feifei;
Zhong, Liang;
Zhang, Hao;
Liu, Feng;
Li, Zhibo

Publication type:

Article

Simplified mathematical modeling and parametric study on friction coefficient of rubber materials for vehicle's tire application.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 12, p. 4032, doi. 10.1002/pen.26164

By:

Kelly, Michael;
Farhad, Siamak

Publication type:

Article