Works about NANOINDENTATION tests
Results: 550
An investigation on the mechanical properties of a multi-layer film coated PMMA by nanoindentation.
- Published in:
- Journal of Polymer Research, 2024, v. 31, n. 5, p. 1, doi. 10.1007/s10965-024-03975-9
- By:
- Publication type:
- Article
Bone Formation is Affected by Matrix Advanced Glycation End Products (AGEs) In Vivo.
- Published in:
- 2016
- By:
- Publication type:
- journal article
Effect of Multiple Passes on Microstructural and Mechanical Properties of Surface Composite Al 2024/SiC Produced by Friction Stir Processing.
- Published in:
- Annales de Chimie Science des Matériaux, 2020, v. 44, n. 6, p. 421, doi. 10.18280/acsm.440608
- By:
- Publication type:
- Article
Mechanical and thermal characterization of grafted PP-NCC nanocomposites.
- Published in:
- Journal of Thermoplastic Composite Materials, 2021, v. 34, n. 12, p. 1666, doi. 10.1177/0892705719878226
- By:
- Publication type:
- Article
Breakdown of the superplastic deformation behavior of heterogeneous nanomaterials at small length scales.
- Published in:
- 2021
- By:
- Publication type:
- Report
Estimating Macrofracture Toughness of Sandstone Based on Nanoindentation.
- Published in:
- Geofluids, 2021, p. 1, doi. 10.1155/2021/6621643
- By:
- Publication type:
- Article
Estimating Macrofracture Toughness of Sandstone Based on Nanoindentation.
- Published in:
- Geofluids, 2021, p. 1, doi. 10.1155/2021/6621643
- By:
- Publication type:
- Article
A Molecular Dynamics Investigation of the Temperature Effect on the Mechanical Properties of Selected Thin Films for Hydrogen Separation.
- Published in:
- Membranes, 2020, v. 10, n. 9, p. 241, doi. 10.3390/membranes10090241
- By:
- Publication type:
- Article
Use of Photoreactive Riboflavin and Blue Light Irradiation in Improving Dentin Bonding—Multifaceted Evaluation.
- Published in:
- Journal of Functional Biomaterials, 2025, v. 16, n. 1, p. 11, doi. 10.3390/jfb16010011
- By:
- Publication type:
- Article
Polydopamine-Coated Alginate Microgels: Process Optimization and In Vitro Validation.
- Published in:
- Journal of Functional Biomaterials, 2023, v. 14, n. 1, p. 2, doi. 10.3390/jfb14010002
- By:
- Publication type:
- Article
Mechanobiological Assessment of TMJ Disc Surfaces: Nanoindentation and Transmission Electron Microscopy.
- Published in:
- Journal of Oral & Maxillofacial Research, 2015, v. 6, n. 4, p. 1, doi. 10.5037/jomr.2015.6403
- By:
- Publication type:
- Article
SILICON CARBIDE BONDING FOR HIGH TEMPERATURES RESISTANT JOINTS.
- Published in:
- Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment & Technology, 2012, v. 23, p. 5
- By:
- Publication type:
- Article
Mechanical property characterization of mudstone based on nanoindentation technique combined with upscaling method.
- Published in:
- Environmental Earth Sciences, 2023, v. 82, n. 21, p. 1, doi. 10.1007/s12665-023-11161-1
- By:
- Publication type:
- Article
Nano-indentation and Corrosion Characteristics of Ultrasonic Vibration Assisted Stir-Cast AZ31–WC–Graphite Nano-composites.
- Published in:
- International Journal of Metalcasting, 2021, v. 15, n. 3, p. 1058, doi. 10.1007/s40962-020-00538-8
- By:
- Publication type:
- Article
Artificial Neural Networks Investigation of Indentation Force Effects on Nano- and Microhardness of Dual Phase Steels.
- Published in:
- Journal of Metallurgy, 2014, p. 1, doi. 10.1155/2014/813234
- By:
- Publication type:
- Article
DLC FILMS ON Ti<sub>6</sub>Al<sub>4</sub>V SUBSTRATES OF NANOINDENTATION, SURFACE ROUGHNESS FOR LASER POWDER BED FUSION WAS PERFORMED UTILIZING ORTHOPEDIC IMPLANT MATERIALS.
- Published in:
- Surface Review & Letters, 2025, v. 32, n. 1, p. 1, doi. 10.1142/S0218625X2550012X
- By:
- Publication type:
- Article
The iNano. Putting nanoindentation capability in reach of your budget.
- Published in:
- 2014
- Publication type:
- Product Review
Fabrication and characterization of an electrostatically bonded PEEK‐ hydroxyapatite composites for biomedical applications.
- Published in:
- Journal of Biomedical Materials Research, Part B: Applied Biomaterials, 2020, v. 108, n. 6, p. 2513, doi. 10.1002/jbm.b.34583
- By:
- Publication type:
- Article
New insights into the role of Al<sub>2</sub>O<sub>3</sub> nano-supplements in mechanical performance of PMMA and PMMA/HA bone cements using nanoindentation and nanoscratch measurements.
- Published in:
- Materials Technology, 2021, v. 36, n. 4, p. 212, doi. 10.1080/10667857.2020.1741939
- By:
- Publication type:
- Article
Microscopic Morphology Observation of Fracture Healing Process Promoted by Panax Notoginseng Saponins.
- Published in:
- International Journal of Morphology, 2021, v. 39, n. 6, p. 1581, doi. 10.4067/s0717-95022021000601581
- By:
- Publication type:
- Article
Properties of Al<sub>0.5</sub>CoCrFeNi<sub>2</sub>Ti High-Entropy Alloy System: From Gas-Atomized Powders to Atmospheric Plasma-Sprayed Coatings.
- Published in:
- Journal of Thermal Spray Technology, 2024, v. 33, n. 8, p. 2839, doi. 10.1007/s11666-024-01877-2
- By:
- Publication type:
- Article
Evaluation of Cyclic Hot Corrosion Resistance of Plasma-Sprayed Composite Coating in Na2SO4-60%V2O5 Molten Salt Environment.
- Published in:
- Journal of Thermal Spray Technology, 2020, v. 29, n. 4, p. 811, doi. 10.1007/s11666-020-01010-z
- By:
- Publication type:
- Article
Measurement of the Young's Modulus of Thermal Spray Coatings by Means of Several Methods.
- Published in:
- Journal of Thermal Spray Technology, 2013, v. 22, n. 2/3, p. 290, doi. 10.1007/s11666-012-9855-x
- By:
- Publication type:
- Article
Influence of copper on hardness of amorphous As-Se-I thin films.
- Published in:
- Materials Science & Technology, 2014, v. 30, n. 2, p. 236, doi. 10.1179/1743284713Y.0000000346
- By:
- Publication type:
- Article
Understanding the relationship between microstructure and mechanical behavior of plasma-sprayed amorphous Al<sub>2</sub>O<sub>3</sub>–YAG ceramic coating based on depth-sensing indentation measurements.
- Published in:
- Journal of Materials Science, 2022, v. 57, n. 31, p. 14681, doi. 10.1007/s10853-022-07585-y
- By:
- Publication type:
- Article
Toward the correlation of indentation hardness in micro- and nano-scale: understanding of indentation edge behaviors in Fe–Cr alloys.
- Published in:
- Journal of Materials Science, 2022, v. 57, n. 28, p. 13736, doi. 10.1007/s10853-022-07461-9
- By:
- Publication type:
- Article
Toward the design of robust multilayer graphene: mechanistic understanding of the role played by interlayer interactions.
- Published in:
- Journal of Materials Science, 2022, v. 57, n. 4, p. 2514, doi. 10.1007/s10853-021-06656-w
- By:
- Publication type:
- Article
Residual stresses in the graded interlayer between W and CuCrZr alloy.
- Published in:
- Journal of Materials Science, 2022, v. 57, n. 1, p. 285, doi. 10.1007/s10853-021-06631-5
- By:
- Publication type:
- Article
Clustering analysis of grid nanoindentation data for cementitious materials.
- Published in:
- Journal of Materials Science, 2021, v. 56, n. 21, p. 12238, doi. 10.1007/s10853-021-05848-8
- By:
- Publication type:
- Article
Dislocation-based crack initiation and propagation in single-crystal SrTiO3.
- Published in:
- Journal of Materials Science, 2021, v. 56, n. 9, p. 5479, doi. 10.1007/s10853-020-05587-2
- By:
- Publication type:
- Article
Self-calibration of area function for mechanical property determination with nanoindentation tests.
- Published in:
- Journal of Materials Science, 2020, v. 55, n. 33, p. 16002, doi. 10.1007/s10853-020-05167-4
- By:
- Publication type:
- Article
Combined crystal plasticity simulations and experiments for parameter identification: application to near-β titanium alloy.
- Published in:
- Journal of Materials Science, 2020, v. 55, n. 30, p. 15043, doi. 10.1007/s10853-020-05089-1
- By:
- Publication type:
- Article
Evolution and micromechanical properties of interface structures in TiNbf/TiAl composites prepared by powder metallurgy.
- Published in:
- Journal of Materials Science, 2020, v. 55, n. 26, p. 12421, doi. 10.1007/s10853-020-04816-y
- By:
- Publication type:
- Article
Characterization of heterogeneous–nano structure in austenitic stainless steel: crystal orientations and hardness distribution.
- Published in:
- Journal of Materials Science, 2020, v. 55, n. 22, p. 9299, doi. 10.1007/s10853-020-04643-1
- By:
- Publication type:
- Article
Mechanical and fracture behaviour of the three-scale hierarchy structure in As-deposited and annealed nanocrystalline electrodeposited Ni–Fe alloys.
- Published in:
- Journal of Materials Science, 2019, v. 54, n. 20, p. 13378, doi. 10.1007/s10853-019-03835-8
- By:
- Publication type:
- Article
Interfacial microstructure evolution and deformation mechanism in an explosively welded Al/Mg alloy plate.
- Published in:
- Journal of Materials Science, 2019, v. 54, n. 12, p. 9155, doi. 10.1007/s10853-019-03529-1
- By:
- Publication type:
- Article
The response of yttrium aluminum garnet (YAG) grains and grain boundaries to nanoindentation.
- Published in:
- Journal of Materials Science, 2018, v. 53, n. 24, p. 16198, doi. 10.1007/s10853-018-2782-6
- By:
- Publication type:
- Article
Physical and nanomechanical properties of the synthetic anhydrous crystalline CaCO polymorphs: vaterite, aragonite and calcite.
- Published in:
- Journal of Materials Science, 2018, v. 53, n. 6, p. 4022, doi. 10.1007/s10853-017-1884-x
- By:
- Publication type:
- Article
Nanoindentaion and tensile testing of human hair fibres.
- Published in:
- Journal of Materials Science, 2016, v. 51, n. 22, p. 10191, doi. 10.1007/s10853-016-0246-4
- By:
- Publication type:
- Article
An investigation into the dynamic indentation response of metallic materials.
- Published in:
- Journal of Materials Science, 2016, v. 51, n. 18, p. 8310, doi. 10.1007/s10853-016-0031-4
- By:
- Publication type:
- Article
Mechanical properties of amorphous silicon carbonitride thin films at elevated temperatures.
- Published in:
- Journal of Materials Science, 2015, v. 50, n. 4, p. 1553, doi. 10.1007/s10853-014-8715-0
- By:
- Publication type:
- Article
The effect of work-hardening and pile-up on nanoindentation measurements.
- Published in:
- Journal of Materials Science, 2014, v. 49, n. 14, p. 5066, doi. 10.1007/s10853-014-8213-4
- By:
- Publication type:
- Article
Local plastic deformation in the vicinity of grain boundaries in Fe-3 mass% Si alloy bicrystals and tricrystal.
- Published in:
- Journal of Materials Science, 2014, v. 49, n. 14, p. 4698, doi. 10.1007/s10853-014-8150-2
- By:
- Publication type:
- Article
Determination of interfacial mechanical properties of ceramic composites by the compression of micro-pillar test specimens.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 15, p. 5219, doi. 10.1007/s10853-013-7311-z
- By:
- Publication type:
- Article
Effect of severe plastic deformation on creep behaviour of a Ti-6Al-4V alloy.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 13, p. 4789, doi. 10.1007/s10853-013-7160-9
- By:
- Publication type:
- Article
Nanoscale mechanical characterization of PMMA by AFM nanoindentation: a theoretical study on the time-dependent viscoelastic recovery.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 9, p. 3479, doi. 10.1007/s10853-013-7138-7
- By:
- Publication type:
- Article
The influence of surface microstructure on the scratch characteristics of Kevlar fibers.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 3, p. 1292, doi. 10.1007/s10853-012-6872-6
- By:
- Publication type:
- Article
Nanoindentation Tests for Characterization of Hydroxyapatite Thin Films.
- Published in:
- 2023
- By:
- Publication type:
- Abstract
(Ti<sub>0.25</sub> Zr<sub>0.25</sub> Nb<sub>0.25</sub> Ta<sub>0.25</sub>) C 高熵陶瓷的制备、 力学性能及氧化行为研究.
- Published in:
- Bulletin of the Chinese Ceramic Society, 2022, v. 41, n. 6, p. 2117
- By:
- Publication type:
- Article
Microhardness and corrosion resistance behaviour of Ti-6Al-4V alloy-coloured surface under WEDM-HS process.
- Published in:
- Micro & Nano Letters (Wiley-Blackwell), 2017, v. 12, n. 9, p. 618, doi. 10.1049/mnl.2017.0037
- By:
- Publication type:
- Article