Found: 723
Select item for more details and to access through your institution.
Defects in Rotary Draw Bending and Their Effects on Formability.
- Published in:
- Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 2024, v. 12, n. 3, p. 714, doi. 10.29109/gujsc.1488157
- By:
- Publication type:
- Article
Annealing-induced formation of Sn<sub>2</sub>P<sub>2</sub>S<sub>6</sub> crystallites in As<sub>2</sub>S<sub>3</sub>-based glass matrix.
- Published in:
- Semiconductor Physics, Quantum Electronics & Optoelectronics, 2015, v. 18, n. 3, p. 248, doi. 10.15407/spqeo18.03.248
- By:
- Publication type:
- Article
8H-, 10H-, 14H-SiC formation in 6H-3C silicon carbide phase transitions.
- Published in:
- Semiconductor Physics, Quantum Electronics & Optoelectronics, 2013, v. 16, n. 3, p. 273
- By:
- Publication type:
- Article
Comparison of formability of friction stir welded and laser welded dual phase 590 steel sheets.
- Published in:
- Science & Technology of Welding & Joining, 2006, v. 11, n. 4, p. 384, doi. 10.1179/174329306X107737
- By:
- Publication type:
- Article
Dynamic softening mechanism of 30 % SiCp/2024Al composite during hot deformation process.
- Published in:
- Materialwissenschaft und Werkstoffechnik, 2018, v. 49, n. 9, p. 1098, doi. 10.1002/mawe.201700185
- By:
- Publication type:
- Article
A method for the systematic assessment of lubricant performance during superplastic sheet forming.
- Published in:
- Materialwissenschaft und Werkstoffechnik, 2017, v. 48, n. 10, p. 976, doi. 10.1002/mawe.201700041
- By:
- Publication type:
- Article
Fertigung qualitätsoptimierter Spaltprofile durch Variation schnell änderbarer Prozessgrößen und deren Einfluss auf die Materialeigenschaften.
- Published in:
- Materialwissenschaft und Werkstoffechnik, 2013, v. 44, n. 7, p. 601, doi. 10.1002/mawe.201300167
- By:
- Publication type:
- Article
Rücktitelbild: A 3D Organically Synthesized Porous Carbon Material for Lithium‐Ion Batteries (Angew. Chem. 37/2018).
- Published in:
- Angewandte Chemie, 2018, v. 130, n. 37, p. 12356, doi. 10.1002/ange.201808423
- By:
- Publication type:
- Article
Titelbild: Versatile Ferroelastic Deformability in an Organic Single Crystal by Twinning about a Molecular Zone Axis (Angew. Chem. 37/2018).
- Published in:
- Angewandte Chemie, 2018, v. 130, n. 37, p. 11997, doi. 10.1002/ange.201808422
- By:
- Publication type:
- Article
Versatile Ferroelastic Deformability in an Organic Single Crystal by Twinning about a Molecular Zone Axis.
- Published in:
- Angewandte Chemie, 2018, v. 130, n. 37, p. 12064, doi. 10.1002/ange.201803097
- By:
- Publication type:
- Article
Micro‐Embossing Formability of a Superlight Dual‐Phase Mg–Li Alloy Processed by High‐Pressure Torsion.
- Published in:
- Advanced Engineering Materials, 2019, v. 21, n. 2, p. N.PAG, doi. 10.1002/adem.201800961
- By:
- Publication type:
- Article
Improving Formability of Mg-Ca-Zr Sheet Alloy by Microalloying of Zn.
- Published in:
- Advanced Engineering Materials, 2016, v. 18, n. 10, p. 1763, doi. 10.1002/adem.201600293
- By:
- Publication type:
- Article
Die Design Modification to Improve Workability during Equal Channel Angular Pressing.
- Published in:
- Advanced Engineering Materials, 2016, v. 18, n. 8, p. 1469, doi. 10.1002/adem.201600110
- By:
- Publication type:
- Article
Effect of SDS decoration of graphene on the rheological and electrical properties of graphene-filled epoxy/Ag composites.
- Published in:
- Journal of Materials Science: Materials in Electronics, 2016, v. 27, n. 12, p. 12955, doi. 10.1007/s10854-016-5434-0
- By:
- Publication type:
- Article
Eliminating Wrinkling During the Forming of Parts with a Tall Convex Side by Using Wrinkle Suppressors.
- Published in:
- Metallurgist, 2015, v. 59, n. 5/6, p. 455, doi. 10.1007/s11015-015-0125-2
- By:
- Publication type:
- Article
The Formation of Sulfide Inclusions and Their Location Within Grains in Relation to Steel 20 Deoxidation Conditions.
- Published in:
- Metallurgist, 2014, v. 58, n. 5/6, p. 392, doi. 10.1007/s11015-014-9921-3
- By:
- Publication type:
- Article
Control of Structure Formation During Thermomechanical Treatment of Shipbuilding and Pipe Steels of Unified Chemical Composition.
- Published in:
- Metallurgist, 2014, v. 58, n. 5/6, p. 406, doi. 10.1007/s11015-014-9924-0
- By:
- Publication type:
- Article
Erratum to: Analysis of Pore Formation and Impeded Shrinkage of an Alloy in the System ProCast.
- Published in:
- 2014
- By:
- Publication type:
- Erratum
Use of the Program PAM-STAMP to Study the Effect of the As-Received Condition of a Material on its Formability During Stamping.
- Published in:
- Metallurgist, 2014, v. 58, n. 3/4, p. 162, doi. 10.1007/s11015-014-9886-2
- By:
- Publication type:
- Article
Organizing the Production of Pigmentedtitanium Dioxide as Part of the Formation of the Far-East Metallurgical Cluster.
- Published in:
- Metallurgist, 2014, v. 58, n. 1/2, p. 58, doi. 10.1007/s11015-014-9868-4
- By:
- Publication type:
- Article
Incidental Extraction of Rare Microelements During the Systematic Processing of Sulfide Copper Ores.
- Published in:
- Metallurgist, 2014, v. 58, n. 1/2, p. 66, doi. 10.1007/s11015-014-9869-3
- By:
- Publication type:
- Article
Effect of Fractional Nature of Deformation on Ultrafine Structure Formation in low-Carbon Low-Alloy Steels.
- Published in:
- Metallurgist, 2014, v. 57, n. 11/12, p. 1009, doi. 10.1007/s11015-014-9837-y
- By:
- Publication type:
- Article
Interaction of Forming Thin Slab with Mold Working Surface.
- Published in:
- Metallurgist, 2014, v. 57, n. 11/12, p. 1095, doi. 10.1007/s11015-014-9851-0
- By:
- Publication type:
- Article
Technology for Producing Crystalline Silicon with the Use of Non-Traditional Reducing Agents.
- Published in:
- Metallurgist, 2014, v. 57, n. 11/12, p. 1022, doi. 10.1007/s11015-014-9839-9
- By:
- Publication type:
- Article
Use of Modeling to Determine the Effect of the Contents of Aluminum and Nitrogen on the Formation of Nonmetallic Inclusions in High-Carbon Steel.
- Published in:
- Metallurgist, 2014, v. 57, n. 11/12, p. 981, doi. 10.1007/s11015-014-9833-2
- By:
- Publication type:
- Article
Structure Formation of Copper with Reverse Extrusion.
- Published in:
- Metallurgist, 2013, v. 57, n. 7/8, p. 639, doi. 10.1007/s11015-013-9782-1
- By:
- Publication type:
- Article
Technology for restoring the original profile of blast furnaces at the Chelyabinsk Metallurgical Combine.
- Published in:
- Metallurgist, 2013, v. 57, n. 3/4, p. 181, doi. 10.1007/s11015-013-9710-4
- By:
- Publication type:
- Article
Evaluation of Possible Mechanical Property Improvement for Alloy of the Al-Fe-Si-Mn System by Equal-Channel Angular Pressing.
- Published in:
- Metallurgist, 2013, v. 57, n. 1/2, p. 159, doi. 10.1007/s11015-013-9706-0
- By:
- Publication type:
- Article
Kinetics of shear processes in the plastic region of a billet during longitudinal rolling.
- Published in:
- Metallurgist, 2007, v. 51, n. 7/8, p. 456, doi. 10.1007/s11015-007-0081-6
- By:
- Publication type:
- Article
Effect of continuous strain path changes on forming limit strains of DP600.
- Published in:
- Strain, 2019, v. 55, n. 6, p. N.PAG, doi. 10.1111/str.12329
- By:
- Publication type:
- Article
FORMABILITY OF THIN SHEETS FROM ALUMINUM ALLOYS.
- Published in:
- Advances in Science & Technology Research Journal, 2016, v. 10, n. 32, p. 248, doi. 10.12913/22998624/65759
- By:
- Publication type:
- Article
FABRICATION OF A PLATE-TYPE POROUS STAINLESS STEEL 316L POWDER FILTER WITH DIFFERENT PORE STRUCTURES WITHOUT USE OF A BINDER.
- Published in:
- Archives of Metallurgy & Materials, 2024, v. 69, n. 2, p. 497, doi. 10.24425/amm.2024.149775
- By:
- Publication type:
- Article
PERFORMANCE ANALYSIS OF MULTI-POINT INCREMENTAL FORMING TOOL USING MARTENSITIC AISI 420 SHEET METALS.
- Published in:
- Archives of Metallurgy & Materials, 2024, v. 69, n. 1, p. 325, doi. 10.24425/amm.2024.149097
- By:
- Publication type:
- Article
A NEW APPROACH TO EXPERIMENTAL TESTING OF SHEET METAL FORMABILITY FOR AUTOMOTIVE INDUSTRY.
- Published in:
- Archives of Metallurgy & Materials, 2019, v. 64, n. 4, p. 1231, doi. 10.24425/amm.2019.130085
- By:
- Publication type:
- Article
APPLICATION OF TWO ADVANCED VISION METHODS BASED ON STRUCTURAL AND SURFACE ANALYSES TO DETECT DEFECTS IN THE ERICHSEN CUPPING TEST.
- Published in:
- Archives of Metallurgy & Materials, 2019, v. 64, n. 3, p. 1041, doi. 10.24425/amm.2019.129493
- By:
- Publication type:
- Article
FORMING LIMIT DIAGRAM, VOID ANALYSIS, STRAIN DISTRIBUTION AND SURFACE ROUGHNESS FOR SS430 SHEETS DURING MULTIPOINT INCREMENTAL FORMING.
- Published in:
- Archives of Metallurgy & Materials, 2018, v. 63, n. 4, p. 1709, doi. 10.24425/amm.2018.125096
- By:
- Publication type:
- Article
Influence of Mg Content on Deformability of AlMg Alloys during Extrusion.
- Published in:
- Archives of Metallurgy & Materials, 2016, v. 61, n. 1, p. 85, doi. 10.1515/amm-2016-0010
- By:
- Publication type:
- Article
Analysis of the Deformability of Two-Layer Materials AZ31/Eutectic / Analiza Możliwości Odkształcania Plastycznego Materiału Dwuwarstwowego AZ31/Eutektyka.
- Published in:
- Archives of Metallurgy & Materials, 2015, v. 60, n. 4, p. 3017, doi. 10.1515/amm-2015-0482
- By:
- Publication type:
- Article
Possibilities of Application Methods Drece in Forming of Non-Ferrous Metals / Możliwości Aplikacyjne Metody Drece Dotyczące Odkształcania Metali Nieżelaznych.
- Published in:
- Archives of Metallurgy & Materials, 2015, v. 60, n. 4, p. 3011, doi. 10.1515/amm-2015-0481
- By:
- Publication type:
- Article
Evolution of Microstructure in Rolled Mg-Based Alloy. Textural Aspect / Ewolucja Mikrostruktury W Walcowanym Stopie Na Bazie Mg. Aspekt Teksturowy.
- Published in:
- Archives of Metallurgy & Materials, 2015, v. 60, n. 4, p. 2505, doi. 10.1515/amm-2015-0406
- By:
- Publication type:
- Article
EFFECT OF HEAT TREATMENT CONDITIONS ON THE MORPHOLOGY OF α PHASE AND MECHANICAL PROPERTIES IN Ti-10V-2Fe-3Al TITANIUM ALLOY.
- Published in:
- Archives of Metallurgy & Materials, 2014, v. 59, n. 4, p. 1269, doi. 10.2478/amm-2014-0217
- By:
- Publication type:
- Article
Reformation Capability of Short-Range Order and Their Medium-Range Connections Regulates Deformability of Bulk Metallic Glasses.
- Published in:
- Scientific Reports, 2015, p. 12177, doi. 10.1038/srep12177
- By:
- Publication type:
- Article
Controlled Rejuvenation of Amorphous Metals with Thermal Processing.
- Published in:
- Scientific Reports, 2015, p. 10545, doi. 10.1038/srep10545
- By:
- Publication type:
- Article
COMPARATIVE ANALYSIS OF THE COMPRESSIVE STRENGTH OF CONCRETE WITH GRAVEL AND CRUSHED OVER BURNT BRICKS AS COARSE AGGREGATES.
- Published in:
- Nigerian Journal of Technology, 2013, v. 32, n. 1, p. 7
- By:
- Publication type:
- Article
Effect of process parameters and coating microstructure on powdering behaviour of galvannealed steel sheets.
- Published in:
- Ironmaking & Steelmaking, 2009, v. 36, n. 2, p. 141, doi. 10.1179/174328108X335122
- By:
- Publication type:
- Article
AN ANALYSIS OF THE RESTRAINT FORCE IN DEEP DRAWING OF THE RECTANGULAR PARTS.
- Published in:
- TEHNOMUS, 2013, p. 64
- By:
- Publication type:
- Article
IMPACT CRACK INITIATION AND PROPAGATION ENERGY OF PROLONGED EXPLOITED HEAT RESISTANT STEEL.
- Published in:
- Annals of DAAAM & Proceedings, 2016, v. 27, p. 308, doi. 10.2507/27th.daaam.proceedings.045
- By:
- Publication type:
- Article
METHOD OF FAULT IDENTIFICATION IN MECHATRONIC SYSTEMS.
- Published in:
- Annals of DAAAM & Proceedings, 2016, v. 27, p. 312, doi. 10.2507/27th.daaam.proceedings.046
- By:
- Publication type:
- Article
THE USE OF WALKING MECHANISMS AS AN ADAPTIVE SUSPENSION OF A PLANET ROVER.
- Published in:
- Annals of DAAAM & Proceedings, 2015, v. 26, n. 1, p. 0989, doi. 10.2507/26th.daaam.proceedings.139
- By:
- Publication type:
- Article
Innovative Tool Coatings for Increasing Tool Life in Milling Nickel-Coated Nickel-Silver Alloy.
- Published in:
- Annals of DAAAM & Proceedings, 2014, v. 25, n. 1, p. 946, doi. 10.1016/j.proeng.2015.01.453
- By:
- Publication type:
- Article