Works about MACHINE performance

Results: 2058

Real-time operational parameter recommendation system for tunnel boring machines: Application and performance analysis.

Published in:

Journal of Mountain Science, 2025, v. 22, n. 5, p. 1819, doi. 10.1007/s11629-024-9194-7

By:

Wang, Shuangjing;
Wu, Leijie;
Li, Xu

Publication type:

Article

Effect of Si Addition on the Microstructure, Machinability, and Hot Deformation Behavior of HPb58-3 Brass Alloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4850, doi. 10.1007/s11837-025-07337-8

By:

Guo, Chengjun;
Shen, Shouwen;
Zhang, Biao;
Jiang, Yichuan;
Shi, Lixia;
Xu, Xianglong

Publication type:

Article

Prediction of Time-series Friction Data using ANFIS.

Published in:

Selcuk Journal of Agriculture & Food Sciences / Selcuk Tarim ve Gida Bilimleri Dergisi, 2025, v. 39, n. 1, p. 121, doi. 10.15316/SJAFS.2025.011

By:

Korkmaz, Cem;
Kacar, İlyas

Publication type:

Article

ADVANCING INDUSTRIAL MAINTENANCE: A COMPREHENSIVE APPROACH TO FAILURE PREDICTION USING THE WEIBULL DISTRIBUTION.

Published in:

Academic Journal of Manufacturing Engineering, 2025, v. 23, n. 1, p. 5, doi. 10.5281/zenodo.15180190

By:

AGÁRDI, Anita;
NEHÉZ, Károly

Publication type:

Article

Development of A Cyber Physical System For Conventional Machines in Smart Factories.

Published in:

International Journal for Computers & Their Applications, 2025, v. 32, n. 1, p. 5

By:

Ngoc-Huan Le;
Thanh-Hai Diep;
Ngoc-Duc Trinh;
Ngoc-Hay Nguyen;
Viet-Thang Nguyen;
Narayan C. Debnath;
Thanh-Son Nguyen

Publication type:

Article

基于K-means++算法与YDSE算法的多农机协同优化.

Published in:

Application Research of Computers / Jisuanji Yingyong Yanjiu, 2025, v. 42, n. 5, p. 1453, doi. 10.19734/j.issn.1001-3695.2024.10.0416

By:

彭汪忆楠;
赖惠成;
于逸然;
张过

Publication type:

Article

考虑空闲时隙与多种任务序列的云工作流调度方法.

Published in:

Application Research of Computers / Jisuanji Yingyong Yanjiu, 2025, v. 42, n. 5, p. 1439, doi. 10.19734/j.issn.1001-3695.2024.10.0425

By:

蒋新唤;
王芸;
王晖;
朱肖泽;
吴志强

Publication type:

Article

A new method of rapid-intelligent assessment for the dynamic service performance in high-speed railway subgrade.

Published in:

International Journal of Rail Transportation, 2025, v. 13, n. 3, p. 511, doi. 10.1080/23248378.2024.2345679

By:

Deng, Zhi-xing;
Xie, Kang;
Wang, Wu-Bin;
Su, Qian;
Xu, Lin-Rong;
Li, Jia-Shen;
Liu, Bao

Publication type:

Article

Telugu Sarcasm Detection: Performance Evaluation of Machine Learning Approaches.

Published in:

Mathematical Modelling of Engineering Problems, 2025, v. 12, n. 4, p. 1363, doi. 10.18280/mmep.120427

By:

Vemala, Bhargavi;
Khanam, M. Humera

Publication type:

Article

DEEP LEARNING-DRIVEN DIFFERENTIATED TRAFFIC SCHEDULING IN CLOUD-IOT DATA CENTER NETWORKS.

Published in:

Fractals, 2023, v. 31, n. 6, p. 1, doi. 10.1142/S0218348X2340145X

By:

WANG, XIANJU;
CHEN, TAO;
CHEN, SHUGUANG;
ZHU, YONG;
LIU, JUNHAO;
XU, JINGXIU;
SORADI-ZEID, SAMANEH;
YOUSEFPOUR, AMIN

Publication type:

Article

WNLRC: enhancing chaos prediction with weighted nonlinear reservoir computing and Bayesian optimization.

Published in:

Nonlinear Dynamics, 2025, v. 113, n. 14, p. 18059, doi. 10.1007/s11071-025-11090-7

By:

Zhan, Yichang;
Qin, Xiwen;
Li, Yong

Publication type:

Article

Improving Transformer Health Index Prediction Performance Using Machine Learning Algorithms with a Synthetic Minority Oversampling Technique.

Published in:

Energies (19961073), 2025, v. 18, n. 9, p. 2364, doi. 10.3390/en18092364

By:

Putra, Muhammad Akmal A.;
Suwarno;
Prasojo, Rahman Azis

Publication type:

Article

Machine learning for the prediction of diabetes-related amputation: a systematic review and meta-analysis of diagnostic test accuracy.

Published in:

Clinical & Experimental Medicine, 2025, v. 25, n. 1, p. 1, doi. 10.1007/s10238-025-01697-w

By:

Chen, Zhigang;
Liu, Xinliang;
Li, Simeng;
Wu, Zhenheng;
Tan, Haifen;
Yu, Fuqian;
Wang, Dongmei;
Bo, Yawen

Publication type:

Article

Development of an indigenous maize de-husking machine.

Published in:

Agricultural Engineering International: CIGR Journal, 2025, v. 27, n. 1, p. 214

By:

Kosemani, Babajide Saheed;
Babalola, Ayoola Abiola;
Ilori, Titus Adeyinka

Publication type:

Article

Fabrication and performance evaluation of a solar-powered multipurpose agricultural machine.

Published in:

Agricultural Engineering International: CIGR Journal, 2025, v. 27, n. 1, p. 85

By:

Milufarzana;
Banu, Selina;
Or-Rashid, Md. Harun;
Hasan, Md. Rakib

Publication type:

Article

Characterization of a prototype rapid kilovoltage x‐ray image guidance system designed for a linear accelerator radiation therapy unit.

Published in:

Journal of Applied Clinical Medical Physics, 2025, v. 26, n. 5, p. 1, doi. 10.1002/acm2.70060

By:

Arsenault, Theodore;
Arrue, Jonathan;
Gregg, Kenneth;
Baydoun, Atallah;
Rezai, Atefeh;
Langmack, Christian;
Henke, Lauren;
Spratt, Daniel E.;
Kashani, Rojano;
Price, Alex

Publication type:

Article

结合噪声数据增强的蒙汉伪平行语料库的构造.

Published in:

Computer Engineering & Science / Jisuanji Gongcheng yu Kexue, 2025, v. 47, n. 4, p. 751, doi. 10.3969/j.issn.1007-130X.2025.04.018

By:

田永红;
章钧津;
宋哲煜

Publication type:

Article

Enhancing high pressure pulsation test bench performance: a machine learning approach to failure condition tracking.

Published in:

Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-99488-6

By:

Aksoy, Aslı;
Haki, Ömer

Publication type:

Article

Research on the Translation of Chinese Complex Sentences With Large Language Model ChatGPT-4o--Taking English Translation of Chinese Flowing Sentences as an Example.

Published in:

Theory & Practice in Language Studies (TPLS), 2025, v. 15, n. 5, p. 1541, doi. 10.17507/tpls.1505.19

By:

Ruifang Dou

Publication type:

Article

A technique to predict the aerodynamic effects of battle damage on an aircraft's wing.

Published in:

Aeronautical Journal, 2015, v. 119, n. 1218, p. 937, doi. 10.1017/S0001924000004267

By:

Pickhaver, T. W.;
Render, P. M.

Publication type:

Article

Machine heuristic: concept explication and development of a measurement scale.

Published in:

Journal of Computer-Mediated Communication, 2024, v. 29, n. 6, p. 1, doi. 10.1093/jcmc/zmae019

By:

Yang, Hyun;
Sundar, S Shyam

Publication type:

Article

Redesign of a 3D Low Cost Filament Printer, Adapting it to a Pellet Extruder for New Material Assays.

Published in:

Macromolecular Symposia, 2022, v. 404, n. 1, p. 1, doi. 10.1002/masy.202100323

By:

Mosquera, Alberto;
Andrade, Pamela;
Cobos, Christian;
Cárdenas, Eugenio;
Ferrándiz, Santiago

Publication type:

Article

Frontispiece: Bridging Chemical Knowledge and Machine Learning for Performance Prediction of Organic Synthesis.

Published in:

Chemistry - A European Journal, 2023, v. 29, n. 6, p. 1, doi. 10.1002/chem.202380662

By:

Zhang, Shuo‐Qing;
Xu, Li‐Cheng;
Li, Shu‐Wen;
Oliveira, João C. A.;
Li, Xin;
Ackermann, Lutz;
Hong, Xin

Publication type:

Article

Bridging Chemical Knowledge and Machine Learning for Performance Prediction of Organic Synthesis.

Published in:

Chemistry - A European Journal, 2023, v. 29, n. 6, p. 1, doi. 10.1002/chem.202202834

By:

Zhang, Shuo‐Qing;
Xu, Li‐Cheng;
Li, Shu‐Wen;
Oliveira, João C. A.;
Li, Xin;
Ackermann, Lutz;
Hong, Xin

Publication type:

Article

Experimental study on machining performance and tool wear of TC11 titanium alloy mortise and tenon milling.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 11, p. 5809, doi. 10.1007/s00170-025-15514-x

By:

Lei, Xiaofei;
Chen, Jian;
Wang, Rong;
Wu, Haitao;
Zhao, Biao;
Ding, Wenfeng;
Liu, Ziang;
Liu, Xu

Publication type:

Article

A comprehensive review of micro-milling: fundamental mechanics, challenges, and future prospective.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 9, p. 4309, doi. 10.1007/s00170-025-15388-z

By:

Ullah, Najeeb;
Rehan, Muhammad;
Farooq, Muhammad Umar;
Li, Huaizhong;
Yip, Wai Sze;
To, Sandy Suet

Publication type:

Article

Dynamic performance optimization of five-axis machine tools based on S-specimen and servo dynamics matching degree indexes.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3887, doi. 10.1007/s00170-025-15371-8

By:

Guan, Liwen;
Chen, Yanyu;
Wang, Zijian

Publication type:

Article

The review and prospect of tool coating technology.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3107, doi. 10.1007/s00170-025-15344-x

By:

Kang, Kejia;
Su, Sen;
Yu, Bo;
Sun, Zhibin;
Hu, Sumeng;
Wang, Zimian;
Zhao, Chenhao;
Wu, Lan;
Luo, Guoqiang;
Wei, Ronghan

Publication type:

Article

Chip formation and morphology in cryogenic machining of Al-SiC composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 5, p. 2899, doi. 10.1007/s00170-025-15337-w

By:

Mašek, Petr;
Alagan, Nageswaran Tamil;
Mára, Vladimír;
Awe, Samuel A.;
Nwabuisi, Emeka;
Zeman, Pavel

Publication type:

Article

A precise solving method for helical groove process based on an improved NSGA-II algorithm.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 3, p. 1215, doi. 10.1007/s00170-025-15246-y

By:

Mao, Yuhui;
Wang, Yongguo;
Huang, Xiao

Publication type:

Article

Evaluating sustainability in superalloy machining: an MCDM-based approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 1, p. 563, doi. 10.1007/s00170-025-15211-9

By:

Sen, Binayak;
Bhowmik, Abhijit;
Kumar, Raman;
Kanabar, Bhavesh;
Thulasiram, Ramachandran;
Patta, Vijaya Kumar

Publication type:

Article

Advancements in MQL machining: a comparative study of cutting fluids on AISI 630 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 5, p. 2277, doi. 10.1007/s00170-024-14988-5

By:

M., Balamurugan;
Subramani, Sivakumar;
Dhairiyasamy, Ratchagaraja;
Gabiriel, Deepika

Publication type:

Article

Titanium carbonitride–coated CBN insert featured turning process parameter optimization during AA359 alloy machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 1, p. 45, doi. 10.1007/s00170-024-13583-y

By:

Perumal, Sakthivel;
Amarnath, Mohana Krishnan;
Marimuthu, Karthigairajan;
Subramaniam, Prabagaran;
Rathinavelu, Venkatesh;
Jagadeesh, Duraisamy

Publication type:

Article

Analysis, modelling and optimization during sustainable Dry and MQL turning of AISI 52100 steel using DF, GRA, EAMR, EDAS and FUCA methods.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 11, p. 5035, doi. 10.1007/s00170-024-14736-9

By:

Souaidi, Chaima;
Yallese, Mohamed Athman;
Amirat, Abdelaziz;
Belhadi, Salim;
Mabrouki, Tarek

Publication type:

Article

Tool wear evolution and its influence on cutting performance during milling ultra-high-strength steel using different cooling conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 1/2, p. 525, doi. 10.1007/s00170-024-14577-6

By:

Wu, Bangfu;
Zhang, Minxiu;
Zhao, Biao;
Ding, Wenfeng;
Cui, Hailong

Publication type:

Article

Experiment and simulation analysis on static and dynamic performance of a precision horizontal machining center.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 1/2, p. 573, doi. 10.1007/s00170-024-14448-0

By:

Yan, Kun;
Gao, Hanjun;
Yang, Kai;
Wu, Qiong;
Li, Baiqiao

Publication type:

Article

Influence of milling-finishing-shot peening hybrid machining on the surface integrity and fatigue performance of TC11 titanium integral impeller.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 9/10, p. 4539, doi. 10.1007/s00170-024-14416-8

By:

Wu, Zegang;
Zhang, Dinghua;
Li, Jing;
Luo, Ming

Publication type:

Article

An intelligent multi-objective optimization method for transverse profile grinding processes of large shafts.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 7/8, p. 3787, doi. 10.1007/s00170-024-14309-w

By:

Li, Xuekun;
Ye, Meng;
Tang, Zihan;
Wang, Liping;
Pan, Jiayu;
Wang, Dong

Publication type:

Article

Tool axis vector optimization based on automatic smoothing rotary angles of five-axis machining for laser additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 7/8, p. 3481, doi. 10.1007/s00170-024-14286-0

By:

Liu, Han;
Xing, Fei

Publication type:

Article

Enhancement of ceramic tool behaviour with textured grooves during machining of Inconel® 718.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 5/6, p. 2955, doi. 10.1007/s00170-024-14222-2

By:

Fernández-Lucio, P.;
Urbikain, G.;
Plaza, S.;
Ukar, E.;
Pereira, O.

Publication type:

Article

Vibration characteristics and machining performance of carbon fiber reinforced shaft in poor rigidity machining tool system.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 5/6, p. 2637, doi. 10.1007/s00170-024-14179-2

By:

Ma, Zheng;
Cai, Chongyan;
Yin, Youkang;
Dang, Jiaqiang;
Ming, Weiwei;
An, Qinglong;
Chen, Ming;
Liu, Gang;
Li, Junli

Publication type:

Article

Enhancing the accuracy of machinery fault diagnosis through fault source isolation of complex mixture of industrial sound signals.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 11/12, p. 5627, doi. 10.1007/s00170-024-14080-y

By:

Senanayaka, Ayantha;
Lee, Philku;
Lee, Nayeon;
Dickerson, Charles;
Netchaev, Anton;
Mun, Sungkwang

Publication type:

Article

On the performance of expert-augmented machine learning with limited experimental data collected from powder particle characteristics used in laser powder bed fusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 11/12, p. 5829, doi. 10.1007/s00170-024-14044-2

By:

Liravi, Farima;
Habibnejad-Korayem, Mahdi;
Toyserkani, Ehsan

Publication type:

Article

Wear and micromechanical performance of novel mono/bi-layered PVD-coated WC tools in high-speed turning of Ti-5Al-5V-5Mo-3Cr alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 9/10, p. 4939, doi. 10.1007/s00170-024-14045-1

By:

Syed, Hasan S.;
De Paiva, Jose M.;
Veldhuis, Stephen C.

Publication type:

Article

Estimation method for geometric stability during shoe-type centerless grinding of rolling bearing parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 9/10, p. 4761, doi. 10.1007/s00170-024-14034-4

By:

Grigoriev, Sergey N.;
Zakharov, Oleg V.;
Li, Chen

Publication type:

Article

A review of textured cutting tools' impact on machining performance from a tribological perspective.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 9/10, p. 4023, doi. 10.1007/s00170-024-13865-5

By:

Sristi, Nafisa Anzum;
Zaman, Prianka B.

Publication type:

Article

Study of an ISSA-XGBoost model for milling tool wear prediction under variable working conditions.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 5/6, p. 2761, doi. 10.1007/s00170-024-13811-5

By:

Chen, Shaoyang;
Yin, Zengbin;
Zheng, Lei;
Yuan, Juntang

Publication type:

Article

A novel cooling and lubrication approach: Device development and machining performance evaluation of ultrasonic vibration–assisted MQL.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1667, doi. 10.1007/s00170-024-13832-0

By:

Zhang, Minxiu;
Wu, Bangfu;
Zhao, Biao;
Ding, Wenfeng;
Cui, Hailong

Publication type:

Article

Comprehensive health assessment of faulty and repaired linear axis components through multi-sensor monitoring.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 11/12, p. 5487, doi. 10.1007/s00170-024-13707-4

By:

Hurtado Carreon, Andres;
DePaiva, Jose Mario;
Veldhuis, Stephen C.

Publication type:

Article

Influence of micro-textured polycrystalline diamond tools on the machining performance of titanium alloy Ti-6Al-4V in dry turning.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 9/10, p. 4297, doi. 10.1007/s00170-024-13636-2

By:

Palanivel, Ramaswamy;
Dinaharan, Isaac;
Laubscher, Rudolph Frans;
Alswat, Haitham M

Publication type:

Article