Works matching DE "LUBRICATION systems"

Results: 536

Enhancing tribological properties of MoS2 coatings through doping: a review of mechanisms and applications.

Published in:

Discover Mechanical Engineering, 2025, v. 4, n. 1, p. 1, doi. 10.1007/s44245-025-00105-7

By:

Ahmed, Nihal;
Alam, Mohammad Ashikul;
Sayem, S. M.;
Hassan, Mahmudul

Publication type:

Article

Modeling of Roll Coating Phenomena of Magnetohydrodynamic Hybrid Nanomaterial Polymer Under Lubrication Theory.

Published in:

Macromolecular Theory & Simulations, 2025, v. 34, n. 3, p. 1, doi. 10.1002/mats.202500013

By:

Khaliq, S.;
Abbas, Y.;
Abbas, Z.;
Alfwzan, Wafa F.;
Abualnaja, Khadijah M.

Publication type:

Article

Calculation method of impingement depth and multiple objective optimizations of nozzle layout for aviation gears considering windage.

Published in:

Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-01145-5

By:

Li, Linlin;
Ye, Yuanjun;
Zhang, Yuzhong;
Zhao, Kai

Publication type:

Article

Transient mixed lubrication analysis of the hydrodynamic bearing-rotor system during start-up considering misalignment and wear.

Published in:

Nonlinear Dynamics, 2025, v. 113, n. 14, p. 17769, doi. 10.1007/s11071-025-11120-4

By:

Wang, Gang;
Zhao, Xuewei;
Zhang, Yi;
Li, Changlin;
Du, Jianjun

Publication type:

Article

角接触球轴承精度寿命试验机研制及试验验证.

Published in:

Machine Tool & Hydraulics, 2025, v. 53, n. 5, p. 197, doi. 10.3969/j.issn.1001-3881.2025.05.029

By:

崔永存;
董璞;
舒杭;
周勇勇;
姚嘉

Publication type:

Article

多作用内曲线马达柱塞滚子摩擦副弹流润滑特性分析.

Published in:

Machine Tool & Hydraulics, 2025, v. 53, n. 4, p. 94, doi. 10.3969/j.issn.1001-3881.2025.04.014

By:

杨国来;
谢万耀;
曹文斌;
杨鹏强;
孙丽霞

Publication type:

Article

Gesellschaft für Tribologie.

Published in:: Tribologie und Schmierungstechnik, 2025, v. 72, n. 1, p. 42
Publication type:: Article

Enhancing the Elevated Temperature Tribological Performance of Ni-Based Cermet Coatings for Industrial Applications Deposited by Atmospheric Plasma Spray.

Published in:

Journal of Thermal Spray Technology, 2025, v. 34, n. 4, p. 1229, doi. 10.1007/s11666-025-01956-y

By:

Gautam, Rohit Kumar Singh;
Tripathi, Vivek Mani;
Mishra, Indra Prakash;
Mishra, Subhash;
Ali, Saood;
Kumar, Sunil;
Jha, Pushkar

Publication type:

Article

Rheology of Wood Plastics Melt, Part 2: Effects of Lubricating Systems in HDPE/Maple Composites.

Published in:

Polymer Engineering & Science, 2006, v. 46, n. 4, p. 465, doi. 10.1002/pen.20505

By:

Li, T. Q.;
Wolcott, M. P.

Publication type:

Article

Anticorrosive and lubricating polyphenol coatings on galvanneal steel.

Published in:

Surface Engineering, 2017, v. 33, n. 6, p. 410, doi. 10.1080/02670844.2016.1214385

By:

Jain, R.;
Bhagawati, B.;
Khandagiri, P.;
Shamshoddin, S.;
Bhadu, M. K.;
Rout, T. K.;
Das, S.

Publication type:

Article

Nanoporous Substrate-Infiltrated Hydrogels: a Bioinspired Regenerable Surface for High Load Bearing and Tunable Friction.

Published in:

Advanced Functional Materials, 2015, v. 25, n. 47, p. 7366, doi. 10.1002/adfm.201503681

By:

Ma, Shuanhong;
Scaraggi, M.;
Wang, Daoai;
Wang, Xiaolong;
Liang, Yongmin;
Liu, Weimin;
Dini, Daniele;
Zhou, Feng

Publication type:

Article

Nanoparticle-based lubrication during machining: synthesis, application, and future scope—a critical review.

Published in:

2025

By:

Xu, Moran;
Ali, Saood;
Kurniawan, Rendi;
Gautam, Rohit Kumar Singh;
Sundaresan, Thirumalai Kumaran;
Ahmad, Khursheed

Publication type:

Literature Review

Automatic recognition of grinding quality of titanium alloy based on the convolutional neural network.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 7/8, p. 3941, doi. 10.1007/s00170-024-14692-4

By:

Huang, Wei-Tai;
Yang, Shih-Cheng;
Chou, Fu-I.;
Chou, Jyh-Horng

Publication type:

Article

Investigating the performance of the pressurized injection lubrication technique in the turning process.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 11/12, p. 5697, doi. 10.1007/s00170-024-14407-9

By:

Elsadek, Ahmed A.

Publication type:

Article

Grinding with minimum quantity lubrication: a comparative assessment.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 3/4, p. 955, doi. 10.1007/s00170-023-11962-5

By:

Dambatta, Y. S.;
Li, Changhe;
Yang, Min;
Beikai, L. I.;
Gao, Teng;
Liu, Mingzheng;
Cui, Xin;
Wang, Xiaoming;
Zhang, Yanbin;
Said, Zafar;
Sharma, Shubham;
Zhou, Zongming

Publication type:

Article

Influence of the parameters of a minimum quantity lubrication system on micro milling process results.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 11/12, p. 5279, doi. 10.1007/s00170-023-11333-0

By:

Kieren-Ehses, Sonja;
Mayer, Tobias;
Kirsch, Benjamin;
Aurich, Jan C.

Publication type:

Article

Thermal behavior of an improved face-grinding spindle: water-lubricated hydrostatic thrust bearing decreases temperature rise and increases axial stiffness.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 11/12, p. 4329, doi. 10.1007/s00170-022-09614-1

By:

Jiang, Shuyun;
Lin, Shengye;
Liu, Fukang

Publication type:

Article

A new empirical standby power and auxiliary power model of CNC machine tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3995, doi. 10.1007/s00170-021-08274-x

By:

Zhou, Lirong;
Li, Fangyi;
Wang, Yue;
Wang, Liming;
Wang, Geng

Publication type:

Article

A novel approach to improve environmentally friendly machining processes using ultrasonic nozzle–minimum quantity lubrication system.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 3/4, p. 741, doi. 10.1007/s00170-021-06860-7

By:

Hadad, Mohammadjafar;
Beigi, Mohammad

Publication type:

Article

Carbon solid lubricants: role of different dimensions.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 107, n. 9/10, p. 3875, doi. 10.1007/s00170-020-05297-8

By:

Wu, Shiwen;
Tian, Siyu;
Menezes, Pradeep L.;
Xiong, Guoping

Publication type:

Article

Influence of dry and solid lubricant-assisted MQL cooling conditions on the machinability of Inconel 718 alloy with textured tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 5/6, p. 1835, doi. 10.1007/s00170-019-04221-z

By:

Darshan, Chetan;
Jain, Sumit;
Dogra, Manu;
Gupta, Munish Kumar;
Mia, Mozammel;
Haque, Raisul

Publication type:

Article

Influence of minimum quantity lubrication in the surface quality of milled maraging steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 104, n. 9-12, p. 4301, doi. 10.1007/s00170-019-04262-4

By:

Tomaz, Ítalo V.;
Pardal, Juan Manuel;
Fonseca, Maria Cindra

Publication type:

Article

Wear analysis of forging tools used in the hot forging processes using 3D reverse scanning techniques and cooling-lubricating system.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2009, doi. 10.1007/s00170-018-2066-y

By:

Hawryluk, Marek;
Ziemba, Jacek;
Dworzak, Łukasz;
Kaczyński, Paweł;
Kasprzak, Marcin

Publication type:

Article

Determination of minimum uncut chip thickness under various machining conditions during micro-milling of Ti-6Al-4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 95, n. 5-8, p. 1617, doi. 10.1007/s00170-017-1329-3

By:

Rezaei, Hamed;
Sadeghi, Mohammad Hossein;
Budak, Erhan

Publication type:

Article

Reinforced lubrication of vegetable oils with graphene additive in tapping ADC12 aluminum alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 94, n. 1-4, p. 1031, doi. 10.1007/s00170-017-0952-3

By:

Ni, Jing;
Feng, Guodong;
Meng, Zhen;
Hong, Tao;
Chen, Yebo;
Zheng, Xin

Publication type:

Article

Study on the influence of key design parameters on lubrication characteristics of a novel gear system applying Taguchi method.

Published in:

Structural & Multidisciplinary Optimization, 2020, v. 62, n. 5, p. 2833, doi. 10.1007/s00158-020-02640-1

By:

Deng, Xingqiao;
Wang, Shisong;
Youssef, Hammi;
Qian, Linmao;
Liu, Yucheng

Publication type:

Article

Nonlinear dynamic mechanical response analysis of dual-segment single-span rotor-bearing system under normal condition and misalignment fault.

Published in:

Archive of Applied Mechanics, 2023, v. 93, n. 3, p. 913, doi. 10.1007/s00419-022-02305-z

By:

Ma, Chenyuan;
Zhao, Daoli;
Sun, Weipeng;
Liao, Weili;
Xiao, Yang;
He, Xinlin

Publication type:

Article

Dynamic response errors and accuracy reliability for mechanism with multiple lubrication clearance joints.

Published in:

Archive of Applied Mechanics, 2023, v. 93, n. 2, p. 525, doi. 10.1007/s00419-022-02283-2

By:

Chen, Xiulong;
Wang, Tao;
Gao, Shun

Publication type:

Article

Development of high productivity liquid centrifugal separator drives.

Published in:

Chemical & Petroleum Engineering, 2013, v. 49, n. 3/4, p. 162, doi. 10.1007/s10556-013-9719-3

By:

Dekhanov, V.;
Ratynskaya, N.

Publication type:

Article

A device for automatic deposition of a lubricant under pressure on a threaded surface.

Published in:

Chemical & Petroleum Engineering, 2009, v. 45, n. 7/8, p. 517, doi. 10.1007/s10556-009-9220-1

By:

Yanko, V.

Publication type:

Article

Revealing the Interaction Between the Structural Characteristics of Anodized Nanopores and Their Surface Wettability and Lubricity.

Published in:

Nanomanufacturing & Metrology, 2025, v. 8, n. 1, p. 1, doi. 10.1007/s41871-025-00252-1

By:

Zhang, Honggang;
Li, Jingyi;
Wang, Yuezong;
Liu, Haibin

Publication type:

Article

MINIMUM QUANTITY LUBRICATION (MQL) APPLICATIONS IN AUTOMOTIVE POWER-TRAIN MACHINING.

Published in:

Machining Science & Technology, 2006, v. 10, n. 1, p. 3, doi. 10.1080/10910340500534258

By:

Filipovic, Aleksandar;
Stephenson, DavidA.

Publication type:

Article

Convective inertia effects on the squeeze film between rectangular parallel plates.

Published in:

Turkish Journal of Physics, 2010, v. 34, n. 3, p. 181, doi. 10.3906/fiz-1002-8

By:

SANNI, Sikiru Adigun

Publication type:

Article

Selecting the elastic coupling and lubrification system to a single speed reducer to a mathcad computer-assisted.

Published in:

Scientific Bulletin 'Mircea cel Batran' Naval Academy, 2018, v. 21, n. 1, p. 599, doi. 10.21279/1454-864X-18-I1-090

By:

TUROF, Mihaela

Publication type:

Article

О работоспособности подшипников качения электрических машин на жидкой смазке

Published in:

National Academy of Sciences of Armenia Reports / Doklady Nacionalnaâ Akademiâ Nauk Armenii, 2020, v. 120, n. 4, p. 269

By:

Шекян, Г. Г.;
Геворкян, А. В.

Publication type:

Article

Development of Miniaturised Fibre-Optic Laser Doppler Velocimetry for Opaque Liquid: Measurement of the Velocity Profile in the Engine Oil Flow of a Lubrication System.

Published in:

Photonics, 2024, v. 11, n. 9, p. 892, doi. 10.3390/photonics11090892

By:

Tajikawa, Tsutomu;
Kohri, Shimpei;
Mouri, Taiki;
Fujimi, Takaichi;
Yamaguchi, Hiromasa;
Ohba, Kenkichi

Publication type:

Article

Assessing the Sensitivity of the Rundown of a Turbocharger Rotor Shaft to Determine Its Technical Condition.

Published in:

Tribology in Industry, 2023, v. 45, n. 3, p. 431, doi. 10.24874/ti.1473.04.23.06

By:

Gritsenko, Alexandr;
Shepelev, Vladimir;
Burtsev, Alexandr

Publication type:

Article

A Comparative Review of the Lubrication of Bearings in Wind Turbines and Spacecraft to Address Wind Turbine Bearing Failures.

Published in:

Tribology in Industry, 2023, v. 45, n. 2, p. 257, doi. 10.24874/ti.1452.02.23.05

By:

Krishnan, Sathyan

Publication type:

Article

Studying the Temperature Characteristics of Oil at the Outlet From the K27-145 Turbocharger Rotor Bearing.

Published in:

Tribology in Industry, 2022, v. 44, n. 4, p. 608, doi. 10.24874/ti.1318.06.22.10

By:

Gritsenko, Alexander V.;
Shepelev, Vladimir D.

Publication type:

Article

Study on Frictional Properties of Fine Powder Materials.

Published in:

Tribology in Industry, 2022, v. 44, n. 1, p. 169, doi. 10.24874/ti.1208.11.21.02

By:

Gritsenko, Alexander;
Baryshnikov, Sergey A.;
Shepelev, Vladimir;
Kaliyev, Beibit

Publication type:

Article

The role of fluid–structure coupling in the generation of an attractive squeeze-film force.

Published in:

Journal of Fluid Mechanics, 2025, v. 1003, p. 1, doi. 10.1017/jfm.2024.1129

By:

Ramanarayanan, S.;
Sánchez, A.L.

Publication type:

Article

An analytical study on nonlinear viscoelastic lubrication in journal bearings.

Published in:

Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-43712-8

By:

Abbaspur, Ali;
Norouzi, Mahmood;
Akbarzadeh, Pooria;
Vaziri, Seyyed Amirreza;
Sharghi, Melika Mokhtari;
Kim, Kyung Chun;
Kim, Mirae

Publication type:

Article

Design of magnetic bearings for turbo refrigerant compressors.

Published in:

Mechanics & Industry, 2014, v. 15, n. 4, p. 245, doi. 10.1051/meca/2014032

By:

CHEOL HOON PARK;
SANG KYU CHOI;
SANG YONG HAM

Publication type:

Article

Performance improvement of tilting-pad journal bearings by means of controllable lubrication.

Published in:

Mechanics & Industry, 2012, v. 13, n. 2, p. 17, doi. 10.1051/meca/2012004

By:

Varela, Alejandro Cerda;
Santos, Ilmar Ferreira

Publication type:

Article

Clean, lubricate and sterilise with ease.

Published in:: British Dental Journal, 2013, v. 214, n. 8, p. 422, doi. 10.1038/sj.bdj.2013.413
Publication type:: Article

Development of a Reliable, Inexpensive and Multipurpose Test Rig for Determination of Electrical Resistivity of Liquid Lubricants.

Published in:

International Journal of Pure & Applied Sciences & Technology, 2012, v. 8, n. 2, p. 34

By:

Matharu, S. P.S.;
Sanyal, S.;
Bal, D. S.

Publication type:

Article

Rack-and-pinion effects in molecular rolling friction.

Published in:

Philosophical Magazine Letters, 2008, v. 88, n. 7, p. 509, doi. 10.1080/09500830802255642

By:

Braun, Oleg M.;
Tosatti, Erio

Publication type:

Article

ANALYSIS AND VALIDATION OF THE DYNAMIC METHOD FOR DIAGNOSING DIESEL ENGINE CONNECTING ROD BEARINGS.

Published in:

Transport Problems: an International Scientific Journal, 2018, v. 13, n. 1, p. 123, doi. 10.21307/tp.2018.13.1.11

By:

DANILOV, Igor;
POPOVA, Irina;
MOISEEV, Yury

Publication type:

Article

POSSIBILITIES TO REDUCE INTERRUPTION IN THE EXCAVATOR EsRc-1400 FUNCTIONING BY IMPROVING CENTRALIZED LUBRICATION SYSTEM OF BEARING PRESSURE.

Published in:

Mining Revue / Revista Minelor, 2013, v. 19, n. 1, p. 37

By:

LOGA, Walter;
VĂTAVU, Sorin;
FLOREA, Vlad Alexandru

Publication type:

Article

Study on the lateral and torsional vibration of single rotor-system using an integrated multi-body dynamics and finite element analysis.

Published in:

Advances in Mechanical Engineering (Sage Publications Inc.), 2020, v. 12, n. 10, p. 1, doi. 10.1177/1687814020968336

By:

Eisa, Abdelrahman IA;
Shusen, Li;
Helal, Wasim MK

Publication type:

Article