Works matching DE "LUBRICATING oils"

Results: 1605

What can and can't replace lithium in greases (and why)? Experts weigh in on the strengths of the individual grease types and their logical use in certain applications.

Published in:

Tribology & Lubrication Technology, 2025, v. 81, n. 6, p. 48

By:

Gauntlett, Trevor

Publication type:

Article

NATURAL DURABILITY OF GMELINA ARBOREA LUMBER AND EFFICACY OF USED MOTOR OIL AGAINST CONTROLLING SUBTERRANEAN TERMITES AND FUNGAL DAMAGE.

Published in:

Pro Ligno, 2025, v. 21, n. 1, p. 28

By:

DESALEGN, Getachew;
KABA, Gemechu;
WUBSHET, Tsegaye;
MUSSA, Mahadi;
GEBEYEHU, Danıel;
MEZGEBU, Getachew

Publication type:

Article

Study of the environmental impact of refining used lubricant oils using Life-cycle Assessment methodology as strategy.

Published in:

Prospectiva (1692-8261), 2025, v. 23, n. 1, p. 1, doi. 10.15665/rp.v23i1.3442

By:

Valencia Chavez, José;
Diaz-Uribe, Carlos E.;
Vallejo-Lozada, William

Publication type:

Article

Effect of Lubricating Oil Composition on Damage and Fouling of Sandstone Reservoirs in Natural Gas Production.

Published in:

Chemistry & Technology of Fuels & Oils, 2025, v. 61, n. 1, p. 169, doi. 10.1007/s10553-025-01850-x

By:

Chang, Bin;
Sun, Zhen;
Tian, Guoqing;
Wan, Cixuan;
Guo, Qing

Publication type:

Article

Thermo‐Mechanical Investigation on an Automotive Engine Encapsulation System Made of Fiberglass Reinforced Polyamide PA6 GF30 Material.

Published in:

Macromolecular Symposia, 2020, v. 389, n. 1, p. 1, doi. 10.1002/masy.201900100

By:

Caputo, Francesco;
Lamanna, Giuseppe;
De Luca, Alessandro;
Armentani, Enrico

Publication type:

Article

Study on thermal behavior of an improved motorized spindle with water-lubricated hydrodynamic spiral groove bearings.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 3/4, p. 1697, doi. 10.1007/s00170-024-14552-1

By:

Xu, Ge;
Huang, Xun;
Jiang, Shuyun

Publication type:

Article

Research on vibration characteristics of silicon nitride 6206 full-ceramic bearing with different pre-tightening force and oil supply rate.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 9/10, p. 4943, doi. 10.1007/s00170-023-11411-3

By:

Wu, Yuhou;
Guo, Jiancheng;
Zhang, Xiaochen;
Zhang, Yu;
Wang, He;
Bai, Xu;
Sun, Jian;
Lu, He

Publication type:

Article

Investigation of forming defects in 5A06 aluminum alloy cold stamping of thin-walled shell with corner.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 5/6, p. 2581, doi. 10.1007/s00170-023-10883-7

By:

Wang, Jiapeng;
Liu, Jinping;
Wang, Bin;
Huang, Xiaomin;
Wang, Baoyu

Publication type:

Article

Milling optimization of GH4169 nickel–based superalloy under minimal quantity lubrication condition based on multi-objective particle swarm optimization algorithm.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 11/12, p. 3983, doi. 10.1007/s00170-022-10461-3

By:

Guo, Chenguang;
Chen, Xiaodong;
Li, Qiang;
Ding, Guangshuo;
Yue, Haitao;
Zhang, Jianzhuo

Publication type:

Article

Research and prospect of textured sliding bearing.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 1/2, p. 1, doi. 10.1007/s00170-022-09281-2

By:

Song, Fei;
Yang, Xuefeng;
Dong, Wenlong;
Zhu, Yeqi;
Wang, Zhiyuan;
Wu, Min

Publication type:

Article

A short review on the influence of mechanical machining on tribological and wear behavior of components.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 3/4, p. 1401, doi. 10.1007/s00170-022-08895-w

By:

Kuang, Weijie;
Miao, Qing;
Ding, Wenfeng;
Li, Haonan

Publication type:

Article

Research on the active pressurized forced lubrication deep drawing process and evaluation of the lubrication effect.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 3/4, p. 2815, doi. 10.1007/s00170-022-08892-z

By:

Chen, Duan;
Zhao, Changcai;
Chen, Xiaoyi;
Li, Haoyang;
Zhang, Xin

Publication type:

Article

Circulating purification of cutting fluid: an overview.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 9/10, p. 2565, doi. 10.1007/s00170-021-07854-1

By:

Wu, Xifeng;
Li, Changhe;
Zhou, Zongming;
Nie, Xiaolin;
Chen, Yun;
Zhang, Yanbin;
Cao, Huajun;
Liu, Bo;
Zhang, Naiqing;
Said, Zafar;
Debnath, Sujan;
Jamil, Muhammad;
Ali, Hafiz Muhammad;
Sharma, Shubham

Publication type:

Article

Tribological characteristics and advanced processing methods of textured surfaces: a review.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 5/6, p. 1241, doi. 10.1007/s00170-021-06954-2

By:

Wu, Ze;
Bao, Hang;
Xing, Youqiang;
Liu, Lei

Publication type:

Article

Industrial- and automotive-used lubricating oils recycling cum acidic sludge treatment.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 106, n. 9/10, p. 4157, doi. 10.1007/s00170-019-04751-6

By:

Oladimeji, Temitayo E.;
Oguntuashe, Kehinde M.;
Emetere, Moses E.;
Efeovbokhan, Vincent E.;
Odunlami, Olayemi A.;
Obanla, Oyinlola R.

Publication type:

Article

Study on secondary cutting phenomenon of micro-textured self-lubricating ceramic cutting tools with different morphology parameters formed via in situ forming of Al2O3-TiC.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 104, n. 9-12, p. 3821, doi. 10.1007/s00170-019-04045-x

By:

Feng, Yihua;
Zhang, Jiyun;
Wang, Li;
Zhang, Wenquan;
Yuanpei, Dong

Publication type:

Article

Mineral oil in sunflower seeds: the sources.

Published in:

European Food Research & Technology, 2010, v. 231, n. 2, p. 209, doi. 10.1007/s00217-010-1264-0

By:

Grundböck, Florian;
Fiselier, Katell;
Schmid, Fortunat;
Grob, Koni

Publication type:

Article

Numerical and experimental analysis of the first-and second-mode instability in a rotor-bearing system.

Published in:

Archive of Applied Mechanics, 2014, v. 84, n. 4, p. 519, doi. 10.1007/s00419-013-0815-9

By:

Ma, Hui;
Li, Hui;
Niu, Heqiang;
Song, Rongze;
Wen, Bangchun

Publication type:

Article

Effect of Petrochemicals on Growth and Development of Higher Plants and their Phytoremediation of Soils.

Published in:

Chemical & Petroleum Engineering, 2013, v. 49, n. 7/8, p. 480, doi. 10.1007/s10556-013-9777-6

By:

Ol'shanskaya, L.;
Titorenko, O.;
Khalieva, A.

Publication type:

Article

Heat transfer analysis in the engine‐based oil‐based hybrid nanofluid flow between two spinning disks: Probed by artificial neural network.

Published in:

ZAMM -- Journal of Applied Mathematics & Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2025, v. 105, n. 2, p. 1, doi. 10.1002/zamm.202300728

By:

Khattak, Shahzad;
Waseem;
Ullah, Asad;
Ikramullah;
Althobaiti, Ali;
Khalifa, Hamiden Abd El‐Wahed;
Al‐Rajeh, Moodi Abdulrahman Abdullah

Publication type:

Article

Purification of Used Lubricating Oils Using Vacuum Distillation.

Published in:

Journal of Petroleum Research & Studies, 2024, v. 14, n. 1, p. 111, doi. 10.52716/jprs.v14i1.766

By:

Ahmed, Dalya J.;
Raad, Mustafa;
Chali, Mohammed;
Bahjat, Ahmed

Publication type:

Article

Preparation of CuO Nanoparticles for Improving Base Oil Properties.

Published in:

Journal of Petroleum Research & Studies, 2022, n. 34, p. 191, doi. 10.52716/jprs.v12i1.598

By:

Al-tabbakh, Ban A.;
J., Dalya;
A., Nawar;
K., Sura

Publication type:

Article

Eco-Friendly Biosurfactant: Tackling Oil Pollution in Terrestrial and Aquatic Ecosystems.

Published in:

Fermentation (Basel), 2025, v. 11, n. 4, p. 199, doi. 10.3390/fermentation11040199

By:

Oliveira, Kaio Wêdann;
Selva Filho, Alexandre Augusto P.;
Faccioli, Yslla Emanuelly S.;
Araújo, Gleice Paula;
Converti, Attilio;
Soares da Silva, Rita de Cássia F.;
Sarubbo, Leonie A.

Publication type:

Article

Selection of wash-free antirust oil and study on its adaptability.

Published in:

Electroplating & Finishing, 2023, v. 42, n. 20, p. 42, doi. 10.19289/j.1004-227x.2023.20.006

By:

JIANG Guojie;
REN Yao;
SHI Xiaonan;
MU Chunhui;
DING Feng;
SUN Zhihua

Publication type:

Article

316L 不锈钢超滑表面的制备及抗生物粘附性能研究.

Published in:

Electroplating & Finishing, 2023, v. 42, n. 8, p. 18, doi. 10.19289/j.1004-227x.2023.08.004

By:

陈振彪;
刘超;
钟涛;
张艳梅

Publication type:

Article

Spent Lubricating Oil Residues as New Precursors for Carbon.

Published in:

Fullerenes, Nanotubes & Carbon Nanostructures, 2006, v. 14, n. 1, p. 39, doi. 10.1080/15363830500538615

By:

Shakirullah, Mohammad;
Ahmad, Imtiaz;
Khan, Mohammad Arsala;
Ishaq, Mohammad;
ur Rehman, Habib;
Saeed, Mohammad

Publication type:

Article

Analysis of Lubricating Oil for Cu, Fe, Mn, Ni, and Zn Using Electrothermal Atomic Absorption Spectrometry.

Published in:

Instrumentation Science & Technology, 2004, v. 32, n. 6, p. 689, doi. 10.1081/CI-200037043

By:

Adeyemo, D.J.;
Umar, I.M.;
Thomas, S.A.;
Agbaji, E.B.

Publication type:

Article

Research on Energy Management Strategy of Range Extender Electric Vehicle considering Temperature Effect under Different Heat Demands.

Published in:

International Journal of Energy Research, 2023, p. 1, doi. 10.1155/2023/9903856

By:

Hu, Jianjun;
Wu, Zijia;
Li, Changchun

Publication type:

Article

Biolubricant production via esterification and transesterification processes: Current updates and perspectives.

Published in:

International Journal of Energy Research, 2022, v. 46, n. 4, p. 3860, doi. 10.1002/er.7453

By:

Appiah, Godfred;
Tulashie, Samuel Kofi;
Akpari, Ephraim Edem Amoah;
Rene, Eldon R.;
Dodoo, Daniel

Publication type:

Article

A systematic approach for design and simulation of monoethylene glycol (MEG) recovery in oil and gas industry.

Published in:

International Journal of Energy Research, 2020, v. 44, n. 15, p. 12363, doi. 10.1002/er.5223

By:

Othman, Asmaa;
Al‐Sobhi, Saad A.;
Almomani, Fares;
Khraisheh, Majeda;
AlNouss, Ahmed;
Adham, Samer;
Qiblawey, Hazim

Publication type:

Article

The energy performance of a single‐screw compressor for natural gas liquefaction process: Effects of the lubricating oil flow rate.

Published in:

International Journal of Energy Research, 2019, v. 43, n. 4, p. 1494, doi. 10.1002/er.4406

By:

Li, Yong;
Lu, Yuanwei;
Wu, Yuting;
Sunden, Bengt;
Xie, Gongnan

Publication type:

Article

Studying hydrodynamic friction in the oil ring/cylinder liner contact of an internal combustion engine.

Published in:

Cogent Engineering, 2023, v. 10, n. 2, p. 1, doi. 10.1080/23311916.2023.2289261

By:

Menacer, Brahim;
Narayan, Sunny;
Mahroogi, Faisal O.

Publication type:

Article

Bio-Enhancement of Petroleum Hydrocarbon Polluted Soil Using Newly Isolated Bacteria.

Published in:

Polycyclic Aromatic Compounds, 2020, v. 40, n. 2, p. 484, doi. 10.1080/10406638.2018.1454966

By:

Dadrasnia, Arezoo;
Maikudi Usman, Mohammed;
Tzin Lim, Kang;
Farahiyah, Fairuz Hanani;
binti Mohd Rodzhan, Nur Syazwani;
Abdul Karim, Sofwah Hayati;
Ismail, Salmah

Publication type:

Article

Bioelimination of Phytotoxic Hydrocarbons by Biostimulation and Phytoremediation of Soil Polluted by Waste Motor Oil.

Published in:

Plants (2223-7747), 2023, v. 12, n. 5, p. 1053, doi. 10.3390/plants12051053

By:

Juárez-Cisneros, Gladys;
Saucedo-Martínez, Blanca Celeste;
Sánchez-Yáñez, Juan Manuel

Publication type:

Article

Biorecovery of Agricultural Soil Impacted by Waste Motor Oil with Phaseolus vulgaris and Xanthobacter autotrophicus.

Published in:

Plants (2223-7747), 2022, v. 11, n. 11, p. 1419, doi. 10.3390/plants11111419

By:

Martínez, Blanca Celeste Saucedo;
Benavides, Liliana Márquez;
Santoyo, Gustavo;
Sánchez-Yáñez, Juan Manuel

Publication type:

Article

Development of Miniaturised Fibre-Optic Laser Doppler Velocimetry for Opaque Liquid: Measurement of the Velocity Profile in the Engine Oil Flow of a Lubrication System.

Published in:

Photonics, 2024, v. 11, n. 9, p. 892, doi. 10.3390/photonics11090892

By:

Tajikawa, Tsutomu;
Kohri, Shimpei;
Mouri, Taiki;
Fujimi, Takaichi;
Yamaguchi, Hiromasa;
Ohba, Kenkichi

Publication type:

Article

Using polypropylene needle punch nonwoven sorbents as the interceptor for oil in static and dynamic water experiments.

Published in:

Environmental Technology, 2022, v. 43, n. 25, p. 3919, doi. 10.1080/09593330.2021.1937332

By:

Alassod, Abeer;
Tina, Huseein;
Islam, Syed Rashedul;
Huang, Wanzhen;
Xu, Guangbiao

Publication type:

Article

Novel production of biodispersant by Serratia marcescens UCP 1549 in solid-state fermentation and application for oil spill bioremediation.

Published in:

Environmental Technology, 2022, v. 43, n. 19, p. 2956, doi. 10.1080/09593330.2021.1910733

By:

dos Santos, Renata Andreia;
Rodríguez, Dayana Montero;
Ferreira, Isabela Natália da Silva;
de Almeida, Sérgio Mendonça;
Takaki, Galba Maria de Campos;
de Lima, Marcos Antônio Barbosa

Publication type:

Article

Evaluation of polypropylene melt blown nonwoven as the interceptor for oil.

Published in:

Environmental Technology, 2021, v. 42, n. 18, p. 2784, doi. 10.1080/09593330.2020.1714743

By:

Alassod, Abeer;
Abedalwafa, Mohammed Awad;
Xu, Guangbiao

Publication type:

Article

Kinetic modelling of total petroleum hydrocarbon in spent lubricating petroleum oil impacted soil under different treatments.

Published in:

Environmental Technology, 2020, v. 41, n. 3, p. 339, doi. 10.1080/09593330.2018.1498543

By:

Nwankwegu, Amechi S.;
Li, Yiping;
Jiang, Long;
Lai, Qiuying;
Shenglin, Weng;
Jin, Wei;
Acharya, Kumud

Publication type:

Article

Analysis and Optimization of Nanolubricated Journal Bearing under Thermoelasto-Hydrodynamic Lubrication Considering Cavitation Effect.

Published in:

Tribology in Industry, 2023, v. 45, n. 4, p. 618, doi. 10.24874/ti.1441.01.23.04

By:

Abass, Basim A.;
Ahmed, Saba Y.;
Kadhim, Zainab H.

Publication type:

Article

Insight on the Effect of Nanoparticles addition in Oil Lubrication: A Review.

Published in:

Tribology in Industry, 2023, v. 45, n. 3, p. 444, doi. 10.24874/ti.1437.01.23.05

By:

Aher, Amrut S.;
Pandey, Vijay Kumar

Publication type:

Article

Investigating Into the Effects of Bore Irregularities on the Hydrodynamic Performance Journal Bearing Using Response Surface Methodology.

Published in:

Tribology in Industry, 2023, v. 45, n. 2, p. 201, doi. 10.24874/ti.1431.01.23.03

By:

Pradhan, Sushanta Kumar;
Gupta, Anand;
Mishra, Prakash Chandra

Publication type:

Article

Tribo-layer Properties on AISI52100 Lubricated by Palm Methyl Ester Containing Graphene Nanosheet.

Published in:

Tribology in Industry, 2023, v. 45, n. 2, p. 191, doi. 10.24874/ti.1372.09.22.03

By:

Fuadi, Zahrul;
Kurniawan, Rudi;
Mulana, Farid

Publication type:

Article

Refining Used Lubricant Oils with Different Concentration Levels of Sulfuric Acid and Nonylphenol.

Published in:

Tribology in Industry, 2023, v. 45, n. 1, p. 168, doi. 10.24874/ti.1411.11.22.03

By:

Abisenas Alvarez-Rivera, José;
Castañón-Nájera, Guillermo;
Urrieta-Saltijeral, Juan Manuel;
Laínes-Canepa, José Ramón;
Hernández-Barajasa, José Roberto;
Pampillón-González, Liliana;
Morales-Bautista, Carlos Mario

Publication type:

Article

Experimental Investigations on Temperature and Frictional Behaviors of Textured Journal Bearings.

Published in:

Tribology in Industry, 2022, v. 44, n. 3, p. 508, doi. 10.24874/ti.1278.03.22.07

By:

Kango, Saurabh;
Sharma, Nitin;
Sharma, Rajesh K.;
Pandey, R. K.

Publication type:

Article

Study on Frictional Properties of Fine Powder Materials.

Published in:

Tribology in Industry, 2022, v. 44, n. 1, p. 169, doi. 10.24874/ti.1208.11.21.02

By:

Gritsenko, Alexander;
Baryshnikov, Sergey A.;
Shepelev, Vladimir;
Kaliyev, Beibit

Publication type:

Article

Study of Lubricating Oil Degradation of CI Engine Fueled with Diesel-Ethanol Blend.

Published in:

Tribology in Industry, 2021, v. 43, n. 2, p. 222, doi. 10.24874/ti.913.06.20.11

By:

Kurre, S. K.;
Pandey, S.;
Khatri, N.;
Bhurat, S. S.;
Kumawat, S. K.;
Saxena, S.;
Kumar, S.

Publication type:

Article

The Mechanism for Improving Anti-Wear Properties of Oils Using Hydrodynamic Dispersion.

Published in:

Tribology in Industry, 2020, v. 42, n. 4, p. 621, doi. 10.24874/ti.905.06.20.10

By:

Ventsel, Ye.;
Orel, O.;
Shchukin, O.;
Saienko, N.;
Kovalevskyi, S.

Publication type:

Article

Effect of Aluminium Oxide (Al2O3) Nanoparticles Addition into Lubricating Oil on Tribological Performance.

Published in:

Tribology in Industry, 2020, v. 42, n. 3, p. 494, doi. 10.24874/ti.871.04.20.07

By:

Ghalme, S.;
Koinkar, P.;
Bhalerao, Y.

Publication type:

Article