Works matching DE "LIGHT metal alloys"
Results: 419
Feasibility study of a multi-parameter probability of detection formulation for a Lamb waves–based structural health monitoring approach to light alloy aeronautical plates.
- Published in:
- Structural Health Monitoring, 2017, v. 16, n. 2, p. 225, doi. 10.1177/1475921716670841
- By:
- Publication type:
- Article
Erosion of cold sprayed aeronautical coatings.
- Published in:
- Surface Engineering, 2019, v. 35, n. 9, p. 792, doi. 10.1080/02670844.2019.1586096
- By:
- Publication type:
- Article
Biodegradable magnesium alloy coated by fluoridated hydroxyapatite using MAO/EPD technique.
- Published in:
- Surface Engineering, 2014, v. 30, n. 8, p. 545, doi. 10.1179/1743294414Y.0000000284
- By:
- Publication type:
- Article
Surface modification for mitigation of corrosion/localised corrosion of magnesium alloys.
- Published in:
- Surface Engineering, 2007, v. 23, n. 5, p. 319, doi. 10.1179/174329407X260500
- By:
- Publication type:
- Article
Characterisation of microdischarge evolution and coating morphology transition in plasma electrolytic oxidation of magnesium alloy.
- Published in:
- Surface Engineering, 2007, v. 23, n. 5, p. 324, doi. 10.1179/174329407X260519
- By:
- Publication type:
- Article
High corrosion resistance multilayer nickel coatings on AZ91D magnesium alloys.
- Published in:
- Surface Engineering, 2007, v. 23, n. 5, p. 329, doi. 10.1179/174329407X260528
- By:
- Publication type:
- Article
Study on electroless Ni–P–ZrO<sub>2</sub> composite coatings on AZ91D magnesium alloys.
- Published in:
- Surface Engineering, 2007, v. 23, n. 5, p. 334, doi. 10.1179/174329406X150422
- By:
- Publication type:
- Article
High energy microarc alloying on ZM2 Mg base alloy by ZM2 alloy.
- Published in:
- Surface Engineering, 2007, v. 23, n. 5, p. 344, doi. 10.1179/174329407X238875
- By:
- Publication type:
- Article
Thermoplasmonic study of Au<sub>x</sub>Ag<sub>(1−x)</sub> alloy nanospheres.
- Published in:
- Optical & Quantum Electronics, 2023, v. 55, n. 5, p. 1, doi. 10.1007/s11082-023-04713-z
- By:
- Publication type:
- Article
Li K Emission Spectra Obtained using a New Diffraction Grating with Enhanced Diffraction Efficiency and Widen Energy Range.
- Published in:
- Microscopy & Microanalysis, 2024, v. 30, p. 1, doi. 10.1093/mam/ozae044.102
- By:
- Publication type:
- Article
Quality prediction of friction stir welded joint based on multiple regression: entropy generation analysis.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 11/12, p. 5163, doi. 10.1007/s00170-023-10979-0
- By:
- Publication type:
- Article
Behavior of microcapsules in FML under different pressure of manufacturing in autoclave.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 5/6, p. 2469, doi. 10.1007/s00170-022-10352-7
- By:
- Publication type:
- Article
Preparation of a titanium alloy outer ring self-lubricating spherical plain bearing by a two-step extrusion forming process.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 7/8, p. 4559, doi. 10.1007/s00170-022-09630-1
- By:
- Publication type:
- Article
Recent development of the novel riveting processes.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 1/2, p. 19, doi. 10.1007/s00170-021-07689-w
- By:
- Publication type:
- Article
Optimization of the coupled cooling circuit in electromagnetic forming with finite element analysis.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2211, doi. 10.1007/s00170-021-07525-1
- By:
- Publication type:
- Article
Cold and warm flaring of thin-walled titanium tube using single-point incremental forming.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3357, doi. 10.1007/s00170-021-07135-x
- By:
- Publication type:
- Article
Thermomechanical processing of an ultralight Mg-14Li-1Al alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2020, v. 110, n. 11/12, p. 3221, doi. 10.1007/s00170-020-06032-z
- By:
- Publication type:
- Article
Investigation on precision warm hydroforming with independent circumferential pressure of high-performance aluminum alloy parts with special-shaped bottom.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2020, v. 109, n. 1/2, p. 201, doi. 10.1007/s00170-020-05618-x
- By:
- Publication type:
- Article
Controlling the porosity using exponential decay heat input regimes during electron beam wire-feed additive manufacturing of Al-Mg alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2020, v. 108, n. 9/10, p. 2823, doi. 10.1007/s00170-020-05539-9
- By:
- Publication type:
- Article
Double-sided friction stir spot welding of steel and aluminum alloy sheets.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2018, v. 96, n. 5-8, p. 2875, doi. 10.1007/s00170-018-1710-x
- By:
- Publication type:
- Article
Effect of pulsed magnetic field on the grain refinement and mechanical properties of 6063 aluminum alloy by direct chill casting.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 93, n. 9-12, p. 3033, doi. 10.1007/s00170-017-0724-0
- By:
- Publication type:
- Article
New method to improve the microstructure and mechanical properties of joint obtained using FSW.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 93, n. 9-12, p. 4371, doi. 10.1007/s00170-017-0810-3
- By:
- Publication type:
- Article
Thixoforming of semi-solid AZ91D alloy with high solid fraction prepared by the RUE-based SIMA process.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 93, n. 9-12, p. 4317, doi. 10.1007/s00170-017-0874-0
- By:
- Publication type:
- Article
Weld profile, microstructure, and mechanical property of laser-welded butt joints of 5A06 Al alloy with static magnetic field support.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 5-8, p. 1677, doi. 10.1007/s00170-017-0268-3
- By:
- Publication type:
- Article
HAZ softening behavior of strain-hardened Al-6.7Mg alloy welded by GMAW and pulsed GMAW processes.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 5-8, p. 2255, doi. 10.1007/s00170-017-0318-x
- By:
- Publication type:
- Article
Green machining of aluminum honeycomb treated using ice fixation in cryogenic.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 943, doi. 10.1007/s00170-017-0181-9
- By:
- Publication type:
- Article
The impact of defect morphology, defect size, and SDAS on the HCF response of A356-T6 alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 1113, doi. 10.1007/s00170-017-0192-6
- By:
- Publication type:
- Article
Experimental investigation of limit drawing ratio for AZ31B magnesium alloy sheet in warm stamping.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 92, n. 1-4, p. 723, doi. 10.1007/s00170-017-0196-2
- By:
- Publication type:
- Article
Automatic optimization design of a feeder extrusion die with response surface methodology and mesh deformation technique.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 91, n. 9-12, p. 3181, doi. 10.1007/s00170-017-0018-6
- By:
- Publication type:
- Article
Influence of the Composition of Electrolytes on the Properties of Plasma-Electrolytic Oxide Coatings on Light Alloys.
- Published in:
- Materials Science, 2020, v. 56, n. 1, p. 27, doi. 10.1007/s11003-020-00393-2
- By:
- Publication type:
- Article
Tribological Properties of Combined Metal-Oxide-Ceramic Layers on Light Alloys.
- Published in:
- Materials Science, 2012, v. 48, n. 2, p. 180, doi. 10.1007/s11003-012-9489-7
- By:
- Publication type:
- Article
Codeposition of iron and nickel onto aluminum during contact exchange and the properties of the resulting deposits.
- Published in:
- Protection of Metals, 2008, v. 44, n. 1, p. 43, doi. 10.1134/S0033173208010050
- By:
- Publication type:
- Article
Fatigue Life and Fatigue Crack Growth Behavior of Nonthrough Cracks in Friction Stir-Welded 2024-T3 Aluminum Alloy.
- Published in:
- Transactions of the Japan Society of Aeronautical & Space Science, 2018, v. 61, n. 6, p. 20, doi. 10.2322/tjsass.62.20
- By:
- Publication type:
- Article
A copper alloy light cannon from Grodno: an example of early firearms from Eastern Europe.
- Published in:
- Heritage Science, 2021, v. 9, n. 1, p. 1, doi. 10.1186/s40494-021-00534-z
- By:
- Publication type:
- Article
Niobium and tantalum recovery from the primary source and from tin slag, an industrial challenge: A review.
- Published in:
- Canadian Journal of Chemical Engineering, 2023, v. 101, n. 4, p. 1743, doi. 10.1002/cjce.24621
- By:
- Publication type:
- Article
Catalytic efficiency of oxide particles on heterogeneous nucleation in aluminium alloys with miscibility gap.
- Published in:
- High Temperatures - High Pressures, 2010, v. 39, n. 4, p. 347
- By:
- Publication type:
- Article
Development of Processing Maps for AZ81E Magnesium Alloy.
- Published in:
- High Temperature Materials & Processes, 2018, v. 37, n. 2, p. 157, doi. 10.1515/htmp-2016-0082
- By:
- Publication type:
- Article
ALUMINUM ALLOY WELDING IN AUTOMOTIVE INDUSTRY.
- Published in:
- Transport Problems: an International Scientific Journal, 2020, v. 15, n. 3, p. 67, doi. 10.21307/tp-2020-034
- By:
- Publication type:
- Article
INVESTIGATING OF ECO- AND ENERGY-EFFICIENT LUBRICATION STRATEGIES FOR THE DRILLING OF LIGHT METAL ALLOYS.
- Published in:
- South African Journal of Industrial Engineering, 2010, v. 21, n. 2, p. 25
- By:
- Publication type:
- Article
Effect of Initial Microstructure Prior to Extrusion on the Microstructure and Mechanical Properties of Extruded AZ80 Alloy with a Low Temperature and a Low Ratio.
- Published in:
- Chinese Journal of Mechanical Engineering, 2023, v. 36, n. 1, p. 1, doi. 10.1186/s10033-023-00901-w
- By:
- Publication type:
- Article
Post-anodization methods for improved anticorrosion properties: a review.
- Published in:
- Journal of Coatings Technology & Research, 2021, v. 18, n. 1, p. 1, doi. 10.1007/s11998-020-00367-8
- By:
- Publication type:
- Article
Kinetic gravity separation.
- Published in:
- Physical Separation in Science & Engineering, 2004, v. 13, n. 1, p. 25, doi. 10.1080/00207390410001710717
- By:
- Publication type:
- Article
Welding of magnesium alloys with activating flux.
- Published in:
- Science & Technology of Welding & Joining, 2005, v. 10, n. 6, p. 737, doi. 10.1179/174329305X70702
- By:
- Publication type:
- Article
Optimising multiple qualities of Nd:YAG laser welding onto magnesium alloy via grey relational analysis.
- Published in:
- Science & Technology of Welding & Joining, 2005, v. 10, n. 4, p. 503, doi. 10.1179/174329305X46727
- By:
- Publication type:
- Article
Exact shell solutions for conical springs. II. Radial cylindric curb.
- Published in:
- Mechanics Based Design of Structures & Machines, 2024, v. 52, n. 5, p. 2698, doi. 10.1080/15397734.2023.2189942
- By:
- Publication type:
- Article
Study on energy absorption characteristics of expansion tube with light magnesium alloy.
- Published in:
- Mechanics Based Design of Structures & Machines, 2024, v. 52, n. 1, p. 425, doi. 10.1080/15397734.2022.2117191
- By:
- Publication type:
- Article
3D Digital Volume Correlation of Synchrotron Radiation Laminography Images of Ductile Crack Initiation: An Initial Feasibility Study.
- Published in:
- Experimental Mechanics, 2013, v. 53, n. 4, p. 543, doi. 10.1007/s11340-012-9660-y
- By:
- Publication type:
- Article
Effect of the Mean Size of Fine Intermetallic Compounds on the Strength Property of Sintered Magnesium Alloy by Gas Atomization.
- Published in:
- Journal of the Japan Society of Powder & Powder Metallurgy / Funtai Oyobi Fummatsu Yakin, 2016, v. 63, n. 6, p. 386
- By:
- Publication type:
- Article
Application of Metal Injection Molding to Al Powder.
- Published in:
- Journal of the Japan Society of Powder & Powder Metallurgy / Funtai Oyobi Fummatsu Yakin, 2016, v. 63, n. 6, p. 369
- By:
- Publication type:
- Article
Mechanical Behaviour in DC Alloys Casting Processes.
- Published in:
- Archives of Computational Methods in Engineering, 2014, v. 21, n. 2, p. 91, doi. 10.1007/s11831-014-9100-5
- By:
- Publication type:
- Article