Works about JETS (Fluid dynamics)

Results: 2415

Transtracheal jet oxygenation: Comparing the efficacy and safety of two self‐made Y‐connector devices with the ENK oxygen flow modulator™ in an infant animal model.

Published in:

Pediatric Anesthesia, 2019, v. 29, n. 8, p. 799, doi. 10.1111/pan.13687

By:

Lim, Evangeline H.L.;
Tan, Angela Y.J.;
Sng, David D.W.;
Saffari, Seyed Ehsan;
Tan, Josephine S.K.

Publication type:

Article

Study on Particle Acceleration Characteristics in Supersonic Jet Field of Fluidized Bed Opposed Jet Mill.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 12, p. 7370, doi. 10.1007/s11837-024-06925-4

By:

Huang, Shenglong;
Jiang, Jialing;
Ning, Jiajia;
Li, Hong;
Chen, Haiyan;
Wang, Zhe

Publication type:

Article

Comparison of the Flow Field in the Slab Continuous Casting Mold Between the Two- and Three-Hole Nozzles with High Temperature Quantitative Velocity Measurement and Numerical Simulation.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 12, p. 6972, doi. 10.1007/s11837-024-06679-z

By:

Li, Yuntong;
Yang, Jian;
Meng, Jinsong;
Sun, Qun;
Lin, Yang;
Du, Lin;
Yang, Zeyu;
Chen, Zhuo

Publication type:

Article

Numerical Simulation of Multiphase Flow in Top-Blown Converter Smelting Lead Anode Slime Process.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 10, p. 5828, doi. 10.1007/s11837-024-06723-y

By:

Chen, Ai-liang;
Liu, Yao;
Zhan, Huan-Wu;
Jiang, Xue-Xian;
Sun, Feng-Long;
Hwang, Jiann-Yang;
Xijun-Zhang

Publication type:

Article

Influence of Preheating Temperature on the Characteristics of O2 + CO2 Jet by Mixed Injection with a Swirling Oxygen Nozzle.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 10, p. 2985, doi. 10.1007/s11837-021-04836-2

By:

Feng, Chao;
Chen, Shengzhen;
Dong, Jianfeng;
Zhu, Rong;
Wei, Guangsheng;
Dong, Kai

Publication type:

Article

Study on the Cavity Forming Induced by a Gas Jet Impinging on a Liquid Surface Based on a Deformed Mesh Method.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 10, p. 2953, doi. 10.1007/s11837-021-04810-y

By:

Zhou, Xiaobin;
Yue, Qiang;
Di, Zhanxia;
Sheng, Dongyuan;
Ersson, Mikael

Publication type:

Article

Simulation of Process and Reactor Structure Optimization for CeO2 Preparation from Jet-Flow Pyrolysis.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 5, p. 1660, doi. 10.1007/s11837-019-03397-9

By:

Lv, Chao;
Zhang, Ting'an;
Dou, Zhihe;
Zhao, Qiuyue

Publication type:

Article

Numerical Simulations of Irregular CeO2 Particle Size Distributions.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 1, p. 34, doi. 10.1007/s11837-018-3194-4

By:

Lv, Chao;
Zhang, Ting-An;
Dou, Zhi-He;
Zhao, Qiu-Yue

Publication type:

Article

Influence of SEN on Flow, Solidification, and Solute Transport in Bloom Casting Mold.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 5, p. 719, doi. 10.1007/s11837-018-2770-y

By:

Fang, Qing;
Ni, Hongwei;
Zhang, Hua;
Wang, Bao;
Song, Xiao;
Liu, Chengsong

Publication type:

Article

Erratum to: Submerged Gas Jet Penetration: A Study of Bubbling Versus Jetting and Side Versus Bottom Blowing in Copper Bath Smelting.

Published in:

2017

By:

Kapusta, Joël

Publication type:

Erratum

Boundary Effects of Vertical Buoyant Jets in a Stagnant Fluid in a Crossflow.

Published in:

Experimental Techniques, 2020, v. 44, n. 2, p. 149, doi. 10.1007/s40799-019-00320-4

By:

Keramaris, E.;
Pechlivanidis, G.

Publication type:

Article

Micro-mechanism study on tissue removal behavior under medical waterjet impact using coupled SPH-FEM.

Published in:

Medical & Biological Engineering & Computing, 2023, v. 61, n. 3, p. 721, doi. 10.1007/s11517-022-02732-8

By:

Cao, Chao;
Zhao, Jiyun;
Chao, Liuyin;
Li, Guilin;
Huang, Di

Publication type:

Article

Hypersonic Jets of Detonation Products in the Hydrodynamic Collapse of Macroscopic Voids.

Published in:

Propellants, Explosives, Pyrotechnics, 2025, v. 50, n. 6, p. 1, doi. 10.1002/prep.12055

By:

Wilkening, Jason J.;
Montoya, Gabriel A.;
Strachan, Alejandro;
Son, Steven F.

Publication type:

Article

Simulating the Effects of Grain Surface Morphology on Hot Spots in HMX with Surrogate Model Development.

Published in:

Propellants, Explosives, Pyrotechnics, 2023, v. 48, n. 4, p. 1, doi. 10.1002/prep.202200139

By:

Springer, H. Keo;
Miller, Christopher M.;
Kroonblawd, Matthew P.;
Bastea, Sorin

Publication type:

Article

Simulating the Effects of Grain Surface Morphology on Hot Spots in HMX with Surrogate Model Development.

Published in:

Propellants, Explosives, Pyrotechnics, 2023, v. 48, n. 4, p. 1, doi. 10.1002/prep.202200139

By:

Springer, H. Keo;
Miller, Christopher M.;
Kroonblawd, Matthew P.;
Bastea, Sorin

Publication type:

Article

Study on the Initiation Mechanism of Non‐Premixed Shock Induced Combustion in Supersonic Propellant Gas Jet.

Published in:

Propellants, Explosives, Pyrotechnics, 2019, v. 44, n. 10, p. 1302, doi. 10.1002/prep.201900119

By:

Qin, Qiongyao;
Zhang, Xiaobing

Publication type:

Article

Evaluation and prediction method of heat transfer performance of equivalent high-temperature isothermal impinging jet based on Kriging model.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 6, p. 4801, doi. 10.1007/s10973-024-13972-1

By:

Chen, Xiang-Xin;
Chen, Ray-Bing;
Wu, Chih-Yung

Publication type:

Article

Heat transfer mechanism and thermal performance of a channel with square-wing perforated transverse baffles installed: effect of square-wing location.

Published in:

Journal of Thermal Analysis & Calorimetry, 2023, v. 148, n. 9, p. 3835, doi. 10.1007/s10973-022-11937-w

By:

Eiamsa-Ard, Smith;
Phila, Arnut;
Pimsarn, Monsak;
Maruyama, Naoki;
Hirota, Masafumi

Publication type:

Article

Improvement in cooling using a sinusoidal wavy surface for a turbulent dual jet: a computational study.

Published in:

Journal of Thermal Analysis & Calorimetry, 2023, v. 148, n. 7, p. 2935, doi. 10.1007/s10973-022-11695-9

By:

Singh, Tej Pratap;
Dewan, Anupam

Publication type:

Article

Heat transfer and fluid flow characteristics investigation using detached ribs in an axisymmetric impinging jet flow.

Published in:

Journal of Thermal Analysis & Calorimetry, 2022, v. 147, n. 24, p. 14517, doi. 10.1007/s10973-022-11640-w

By:

Rasheed, Adnan;
Allauddin, Usman;
Ali, Hafiz Muhammad;
Uzair, Muhammad;
Verdin, Patrick G.;
Siddiqui, Yasir H.

Publication type:

Article

Numerical analysis of the effect of hot dent infusion jet on the fluid flow and heat transfer rate through the microchannel in the presence of external magnetic field.

Published in:

Journal of Thermal Analysis & Calorimetry, 2022, v. 147, n. 15, p. 8397, doi. 10.1007/s10973-021-11095-5

By:

jalali, Esmaeil;
Sajadi, S. Mohammad;
Ghaemi, Ferial;
Baleanu, Dumitru

Publication type:

Article

Aeroacoustic analysis of dry ice blasting on divergent nozzle length using CFD to acoustic couple simulation.

Published in:

Journal of Thermal Analysis & Calorimetry, 2022, v. 147, n. 11, p. 6437, doi. 10.1007/s10973-021-10931-y

By:

Mat, Mohamad Nur Hidayat;
Asmuin, Norzelawati;
Md Basir, Md Faisal;
Alazwari, Mashhour A.;
Safaei, Mohammad Reza

Publication type:

Article

Semi-analytical study of impingement cooling of metal foam heat sinks of CPUs with air and hydrogen jets under LTNE condition.

Published in:

Journal of Thermal Analysis & Calorimetry, 2021, v. 145, n. 4, p. 1801, doi. 10.1007/s10973-021-10772-9

By:

Soltangheis, Salar;
Siavashi, Majid;
Izadi, Ali Akbar;
Xiong, Qingang

Publication type:

Article

Experimental investigation of bubble jet flow, sweeping and rotation on horizontal or inclined micro-wire during subcooled boiling.

Published in:

Journal of Thermal Analysis & Calorimetry, 2020, v. 141, n. 1, p. 95, doi. 10.1007/s10973-019-09083-x

By:

Jiang, Hantao;
Zhou, Yong;
Chu, Huaqiang;
Yan, Yan

Publication type:

Article

On heat transfer and flow characteristics of jets impinging onto a concave surface with varying jet arrangements.

Published in:

Journal of Thermal Analysis & Calorimetry, 2020, v. 141, n. 1, p. 57, doi. 10.1007/s10973-019-08901-6

By:

Qiu, Dandan;
Wang, Chenglong;
Luo, Lei;
Wang, Songtao;
Zhao, Zhiqi;
Wang, Zhongqi

Publication type:

Article

Similarity solution of air and nanofluid impingement cooling of a cylindrical porous heat sink.

Published in:

Journal of Thermal Analysis & Calorimetry, 2019, v. 135, n. 2, p. 1399, doi. 10.1007/s10973-018-7540-0

By:

Siavashi, Majid;
Rasam, Hamed;
Izadi, Aliakbar

Publication type:

Article

Comparison of PIV Experiment and Numerical Simulation on the Velocity Distribution of Intermediate Pressure Jets with Different Nozzle Parameters.

Published in:

Irrigation & Drainage, 2017, v. 66, n. 4, p. 510, doi. 10.1002/ird.2133

By:

Jiang, Yue;
Li, Hong;
Xiang, Qingjiang;
Chen, Chao

Publication type:

Article

Formation of Pickering and mixed emulsifier systems stabilised O/W emulsions via Confined Impinging Jets processing.

Published in:

Food & Bioproducts Processing: Transactions of the Institution of Chemical Engineers Part C, 2020, v. 119, n. Part C, p. 360, doi. 10.1016/j.fbp.2019.11.021

By:

Tripodi, Ernesto;
Norton, I.T.;
Spyropoulos, F.

Publication type:

Article

Flow pattern and cleaning performance of a stationary liquid jet operating at conditions relevant for industrial tank cleaning.

Published in:

Food & Bioproducts Processing: Transactions of the Institution of Chemical Engineers Part C, 2017, v. 101, n. Part C, p. 145, doi. 10.1016/j.fbp.2016.11.001

By:

Feldung Damkjœr, N.;
Adler-Nissena, J.;
Jensen, B. B. B.;
Wilson, D. I.

Publication type:

Article

Flow patterns and cleaning behaviour of horizontal liquid jets impinging on angled walls.

Published in:

Food & Bioproducts Processing: Transactions of the Institution of Chemical Engineers Part C, 2015, v. 93, n. 1, p. 333, doi. 10.1016/j.fbp.2014.09.006

By:

Tao Wang;
Davidson, John F.;
Wilson, D. Ian

Publication type:

Article

How to assess cleaning? Evaluating the cleaning performance of moving impinging jets.

Published in:

Food & Bioproducts Processing: Transactions of the Institution of Chemical Engineers Part C, 2015, v. 93, n. 1, p. 327, doi. 10.1016/j.fbp.2014.09.010

By:

Köhler, Hannes;
Stoye, Hannes;
Mauermann, Marc;
Weyrauch, Thomas;
Majschak, Jens-Peter

Publication type:

Article

Anchorage Efficacy of Palatally-inserted Miniscrews in Molar Distalization with a Periodontally/Miniscrew-anchored Distal Jet.

Published in:

Journal of Orofacial Orthopedics/Fortschritte der Kieferorthopadie, 2008, v. 69, n. 2, p. 110

By:

Norbert GÃ¼lden;
Faruk Yildizhan;
Benita Hermanns-Sachweh;
Peter Diedrich

Publication type:

Article

A Comparative Study of Nozzle/Diffuser Micropumps with Novel Valves.

Published in:

Molecules, 2012, v. 17, n. 2, p. 2178, doi. 10.3390/molecules17022178

By:

Kai-Shing Yang;
Tzu-Feng Chao;
Ing Youn Chen;
Chi-Chuan Wang;
Jin-Cherng Shyu

Publication type:

Article

Casting of steel into ingot molds as a 'submerged' jet.

Published in:

Metallurgist, 2011, v. 55, n. 9/10, p. 659, doi. 10.1007/s11015-012-9483-1

By:

Sakhnov, B.;
Stroganov, B.

Publication type:

Article

Modeling gas-jet dust-cleaning above the blowing zone in an oxygen converter.

Published in:

Metallurgist, 2010, v. 54, n. 9/10, p. 585, doi. 10.1007/s11015-011-9343-4

By:

Kozhukhov, A.;
Merker, E.;
Shevchenko, A.

Publication type:

Article

Two-year observations of the blazar H1426 + 428 with the GT-48 atmospheric Cherenkov telescope.

Published in:

Astrophysics, 2012, v. 55, n. 2, p. 226, doi. 10.1007/s10511-012-9230-0

By:

Fidelis, V.

Publication type:

Article

Three HH objects associated with jets.

Published in:

Astrophysics, 2012, v. 55, n. 2, p. 186, doi. 10.1007/s10511-012-9226-9

By:

Gyulbudaghian, A.

Publication type:

Article

The electromagnetic field produced by oscillations of a magnetized incompressible infinitely long cylinder.

Published in:

Astrophysics, 2011, v. 54, n. 4, p. 515, doi. 10.1007/s10511-011-9202-9

By:

Bisnovatyi-Kogan, G.;
Pavlov, S.

Publication type:

Article

The flow field characteristics and rock breaking ability of cone-straight abrasive jet, rotary abrasive jet, and straight-rotating mixed abrasive jet.

Published in:

Petroleum Science (KeAi Communications Co.), 2025, v. 22, n. 6, p. 2457, doi. 10.1016/j.petsci.2025.04.010

By:

Jing-Bin Li;
Ergun Kuru;
Wen-Bin Li;
Chen-Rui Guo;
Gen-Sheng Li;
Zhong-Wei Huang

Publication type:

Article

Cavitation cloud impingement and scattering motion of jet in rock breaking process.

Published in:

Petroleum Science (KeAi Communications Co.), 2024, v. 21, n. 5, p. 3535, doi. 10.1016/j.petsci.2024.05.015

By:

Qi-Heng Zhu;
Fei Ma;
Bo-Shen Liu;
Tian-Xu Luo;
Yan Pan

Publication type:

Article

Improved method for prediction of noise from single jets.

Published in:: Noise & Vibration Worldwide, 2008, v. 39, n. 4, p. 30
Publication type:: Article

Numerical investigation of high speed free shear flow instability and Mach wave radiation.

Published in:: Noise & Vibration Worldwide, 2007, v. 38, n. 3, p. 31
Publication type:: Article

Experimental study of aeroacoustic characteristics of screens with an orifice.

Published in:: Noise & Vibration Worldwide, 2007, v. 38, n. 3, p. 30
Publication type:: Article

The flow and acoustic characteristics of underwater gas jets from large vertical exhaust nozzles.

Published in:

Journal of Low Frequency Noise, Vibration & Active Control, 2018, v. 37, n. 1, p. 74, doi. 10.1177/1461348418761688

By:

Miao, Tiancheng;
Liu, Jingting;
Qin, Shijie;
Chu, Ning;
Wu, Dazhuan;
Wang, Leqin

Publication type:

Article

Increasing the Homogeneity of Liquid Aerated Concrete Mixtures from Dispersed Brittle Materials by Their Vibromixing in the Manufacture of Building Products.

Published in:

Theoretical Foundations of Chemical Engineering, 2019, v. 53, n. 5, p. 760, doi. 10.1134/S004057951905035X

By:

Sergeev, Yu. S.;
D'yakonov, A. A.;
Sergeev, S. V.;
Gordeev, E. N.

Publication type:

Article

Heat transfer similarities between impinging jets and axial-flow impellers.

Published in:

Theoretical Foundations of Chemical Engineering, 2016, v. 50, n. 6, p. 937, doi. 10.1134/S0040579516060130

By:

Petera, Karel;
Dostál, Martin;
Jirout, Tomáš;
Fořt, Ivan

Publication type:

Article

基于旋流射流的清管器结构研究.

Published in:

Fluid Machinery, 2024, v. 52, n. 10, p. 112, doi. 10.3969/j.issn.l005-0329.2024.10.015

By:

吴昊任;
连城;
谢帅;
代伟

Publication type:

Article

脉冲气举用自振空气射流研究.

Published in:

Fluid Machinery, 2024, v. 52, n. 10, p. 89, doi. 10.3969/j.issn.l005-0329.2024.10.012

By:

唐川林;
美丽;
凤玲;
胡东;
程宏贵;
唐志英;
石密

Publication type:

Article

液压滑阀稳态液动力补偿研究.

Published in:

Fluid Machinery, 2024, v. 52, n. 4, p. 65, doi. 10.3969/j.issn.l005-0329.2024.04.010

By:

李瑞川;
李东润;
武小伟;
丁馨铠;
冯桢;
张华忠;
潘永基

Publication type:

Article

Technical and technological support of the technology of activating the process of gasification of thin coal seams.

Published in:

Mining Machines, 2024, v. 42, n. 3, p. 186, doi. 10.32056/KOMAG2023.3.4

By:

FALSHTYNSKYI, Volodymyr;
PERERVA, Andrii;
CHALYI, Vladyslav;
PSYUK, Vladyslav;
DYCHKOVSKYI, Roman

Publication type:

Article