Works matching DE "IRON powder"

Results: 1259

Inside Cover Picture.

Published in:: Chinese Journal of Chemistry, 2025, v. 43, n. 17, p. 2086, doi. 10.1002/cjoc.70227
Publication type:: Article

Iron-Enriched Fish Powder Improved Haemoglobin Levels in Adolescent Girls of West Jaintia Hills District of Meghalaya, India.

Published in:

Biological Trace Element Research, 2022, v. 200, n. 5, p. 2017, doi. 10.1007/s12011-021-02820-0

By:

Kunnath, Asha Kurukkan;
Mathew, Suseela;
Mothadaka, Mukteswar Prasad;
Rao, Ravishankar Chandragiri Nagaraja

Publication type:

Article

Effect of Iron Element Diffusion on the Tribological Properties of Ceramic Brake Pad Materials Under High-Temperature Condition: Effect of Iron Element Diffusion on the Tribological Properties of Ceramic Brake Pad Materials Under High-Temperature Condition: G. Zhang, Li, Xia, Z. Zhang, and Pang

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 3, p. 1536, doi. 10.1007/s11837-024-07033-z

By:

Zhang, G.;
Li, Z.;
Xia, Y.;
Zhang, Z.;
Pang, M.

Publication type:

Article

A New Method of Neodymium-Iron-Boron Magnets/Reduced Graphene Oxide Manufacturing Without a Controlled Atmosphere.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 6, p. 3073, doi. 10.1007/s11837-024-06525-2

By:

Filho, J. C. Silva;
Silva, S. C.;
Takiishi, H.;
Janasi, S. R.;
Martinez, L. G.;
Rey, J. F. Q.;
Escote, M. T.

Publication type:

Article

Microstructure, Particle Size, and Magnetic Property of Fe-6.5 wt.% Si Nanocrystalline Alloys Prepared by Mechanical Alloying.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 3, p. 1066, doi. 10.1007/s11837-023-06300-9

By:

Sun, Yang;
Chen, Yiyue;
Lan, Chunyao;
Tan, You;
Zhang, Lin;
Dong, Bowen;
Lan, Song

Publication type:

Article

Effects of Graphite Additive Ratio and Temperature on Rheological Properties of Magnetorheological Grease.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 2, p. 911, doi. 10.1007/s11837-023-06322-3

By:

Dong, Ji-Qiang;
Ye, Xu-Dan;
Mao, Run-Song;
Wang, Hui-Xing;
Wang, Jiong

Publication type:

Article

Microstructure and Mechanical Properties of Fe-36Ni Alloy Prepared by a Two-Step Hydrogen Reduction Process.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 2, p. 969, doi. 10.1007/s11837-023-06004-0

By:

Liu, Hanning;
Liu, Peidong;
Tian, Qinghua;
Dong, Zhaowang;
Chen, Yubing;
Guo, Xueyi

Publication type:

Article

Resource Utilization of Cyanide Tailings: Preparation of Ferrous Oxalate by a Combined Technique of Anaerobic Roasting–Persulfate Leaching Followed by Oxalic Acid Precipitation.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 1, p. 432, doi. 10.1007/s11837-023-06223-5

By:

Dong, Ping;
Song, Yonghui;
Wu, Lei;
Yin, Ning;
Li, Yifan;
Bao, Jin;
Zhu, Rongyan

Publication type:

Article

Microwave-Intensified Separation of Boron and Iron from Ludwigite Ore Based on Impedance Matching.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 12, p. 5149, doi. 10.1007/s11837-023-06137-2

By:

Ye, Lei;
Tian, Ran;
Tang, Huimin;
Zhang, Jian;
Luo, Guanwen;
Rao, Mingjun;
Peng, Zhiwei

Publication type:

Article

Effects of Fe Doping on Preparation of Ti-Si Porous Membrane via In Situ Reactive Process.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 9, p. 3413, doi. 10.1007/s11837-023-05947-8

By:

Liu, Zhongjun;
Su, Yi;
Zhao, Hui;
Jiao, Yanni;
Lei, Juan;
Ao, Qingbo

Publication type:

Article

Effects of Tempering Temperature on the Microstructure and Mechanical Properties of MIM-4605 High-Strength Low-Alloy Steel.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 12, p. 4736, doi. 10.1007/s11837-022-05466-y

By:

Chung, Chen-Yuan;
Tzeng, Yu-Chih

Publication type:

Article

Effect of Laser Parameters on the Characteristics of a Laser Clad AISI 431 Stainless Steel Coating on Carbon Steel Substrate.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 10, p. 2868, doi. 10.1007/s11837-021-04835-3

By:

Do Vale, Natália L.;
Fernandes, Camila A.;
Santos, Rubens de A.;
Santos, Tiago F. A.;
Urtiga Filho, Severino L.

Publication type:

Article

Using Chlorine Gas to Recover Rare Earth Metals from End-of-Life Permanent Magnets.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 6, p. 1957, doi. 10.1007/s11837-021-04592-3

By:

Kaplan, Valery;
Wachtel, Ellen;
Gartsman, Konstantin;
Feldman, Yishay;
Park, Kyoung-Tae;
Lubomirsky, Igor

Publication type:

Article

The Interfacial Behavior Between Coke and Liquid Iron: A Comparative Study on the Influence of Coke Pore, Carbon Structure and Ash.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 6, p. 2174, doi. 10.1007/s11837-020-04048-0

By:

Sun, Min-Min;
Zhang, Jian-Liang;
Li, Ke-Jiang;
Li, Hong-Tao;
Wang, Zi-Ming;
Jiang, Chun-He;
Ren, Shan;
Wang, Li;
Zhang, Hang

Publication type:

Article

Highly Efficient Beneficiation of Low-Grade Iron Ore via Ore–Coal Composite-Fed Rotary Kiln Reduction: Pilot-Scale Study.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 4, p. 1680, doi. 10.1007/s11837-020-04053-3

By:

Zhong, Ronghai;
Yi, Lingyun;
Huang, Zhucheng;
Cai, Wei;
Jiang, Xiong

Publication type:

Article

Removal of Iron from Polluted Tungsten Powder by Acid Leaching for Recovery of Tungsten.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 2, p. 933, doi. 10.1007/s11837-019-03496-7

By:

Ye, Longgang;
Ouyang, Zhen;
Liu, Shufen;
Tang, Chaobo

Publication type:

Article

Reduction of Red Mud Discharge by Reductive Bayer Digestion: A Comparative Study and Industrial Validation.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 1, p. 270, doi. 10.1007/s11837-019-03874-1

By:

Wang, Yilin;
Li, Xiaobin;
Zhou, Qiusheng;
Wang, Biao;
Qi, Tiangui;
Liu, Guihua;
Peng, Zhihong;
Pi, Jianqing;
Zhao, Zhiqiang;
Wang, Mingli

Publication type:

Article

Development of Fe-9Cr Alloy via High-Energy Ball Milling and Spark Plasma Sintering.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 8, p. 2846, doi. 10.1007/s11837-019-03530-8

By:

Kundu, Arnab;
Sittiho, Anumat;
Charit, Indrajit;
Jaques, Brian;
Jiang, Chao

Publication type:

Article

Immunomagnetic separation using carbonyl iron powder and flow cytometry for rapid detection of Flavobacterium psychrophilum.

Published in:

Analytical & Bioanalytical Chemistry, 2008, v. 391, n. 4, p. 1147, doi. 10.1007/s00216-008-2110-0

By:

Kyoko Hibi;
Hideki Ushio;
Hideo Fukuda;
Kohji Mitsubayashi;
Tetsuhito Hayashi;
Huifeng Ren;
Hideaki Endo

Publication type:

Article

Preparation of Microspherical Ph−Fe/RDX(HMX) Composite Particles and their Thermal Decomposition Behaviors.

Published in:

Propellants, Explosives, Pyrotechnics, 2021, v. 46, n. 5, p. 690, doi. 10.1002/prep.202100030

By:

Song, Naimeng;
Yang, Li;
Liu, Pingan

Publication type:

Article

Analyse der Partikelbildung aus der Elektrospray‐Flammensprühpyrolyse mittels Scanning Mobility Particle Sizer.

Published in:

Chemie Ingenieur Technik (CIT), 2021, v. 93, n. 8, p. 1307, doi. 10.1002/cite.202000195

By:

Bierwirth, Malte;
Olszok, Vinzent;
Ganesan, Varun Aiyar;
Poostforooshan, Jalal;
Weber, Alfred P.

Publication type:

Article

Sintering studies on Ni–Ti–Fe elemental powder mixtures using differential scanning calorimetry.

Published in:

Journal of Thermal Analysis & Calorimetry, 2024, v. 149, n. 23, p. 13745, doi. 10.1007/s10973-024-13770-9

By:

Bertilsson, Tea;
Iyengar, Srinivasan;
Sina, Hossein

Publication type:

Article

Octyltrimethylammonium bromide-assisted synthesis of maghemite powder by thermal decomposition of ferric nitrate and its properties.

Published in:

Journal of Thermal Analysis & Calorimetry, 2021, v. 146, n. 6, p. 2403, doi. 10.1007/s10973-021-10556-1

By:

Zhou, L. H.;
Zhang, B.;
Zhao, S.;
Asuha, S.

Publication type:

Article

Development of the ANN–KIM composed model to predict the nanofluid energetic thermal conductivity via various types of nano-powders dispersed in oil.

Published in:

Journal of Thermal Analysis & Calorimetry, 2021, v. 145, n. 4, p. 2123, doi. 10.1007/s10973-020-10212-0

By:

Mei, Xueqing;
Li, Zhixiong;
Bagherzadeh, Seyed Amin;
Karimipour, Aliakbar;
Bahrami, Mehrdad;
Karimipour, Arash

Publication type:

Article

Effect of water/binder ratio and temperature on the hydration heat and properties of ternary blended cement containing slag and iron tailing powder.

Published in:

Journal of Thermal Analysis & Calorimetry, 2021, v. 144, n. 4, p. 1115, doi. 10.1007/s10973-020-09687-8

By:

Han, Fanghui;
Song, Shaomin;
Liu, Juanhong;
Wu, Ruidong

Publication type:

Article

Oxide reduction and oxygen removal in water-atomized iron powder: a kinetic study.

Published in:

Journal of Thermal Analysis & Calorimetry, 2020, v. 142, n. 1, p. 309, doi. 10.1007/s10973-020-09724-6

By:

Wendel, Johan;
Manchili, Swathi K.;
Hryha, Eduard;
Nyborg, Lars

Publication type:

Article

Study of gasless compositions used in time-delay elements: Fe/BaO2 composition.

Published in:

Journal of Thermal Analysis & Calorimetry, 2020, v. 139, n. 6, p. 3473, doi. 10.1007/s10973-019-08721-8

By:

Gerlich, M. M.;
Wojewódka, A. T.

Publication type:

Article

The influence of reagents ball milling on the lithium ferrite formation.

Published in:

Journal of Thermal Analysis & Calorimetry, 2019, v. 138, n. 3, p. 2005, doi. 10.1007/s10973-019-08334-1

By:

Lysenko, Elena N.;
Nikolaev, Evgeniy V.;
Surzhikov, Anatoliy P.;
Nikolaeva, Svetlana A.;
Plotnikova, Inna V.

Publication type:

Article

Effect of the reaction temperature on the morphology of nanosized HAp.

Published in:

Journal of Thermal Analysis & Calorimetry, 2019, v. 138, n. 1, p. 145, doi. 10.1007/s10973-019-08255-z

By:

György, Szidónia;
Károly, Zoltán;
Fazekas, Péter;
Németh, Péter;
Bódis, Eszter;
Menyhárd, Alfréd;
Kótai, László;
Klébert, Szilvia

Publication type:

Article

An experimental study on stability and rheological properties of magnetorheological fluid using iron nanoparticle core-shell structured by cellulose.

Published in:

Journal of Thermal Analysis & Calorimetry, 2019, v. 135, n. 3, p. 1687, doi. 10.1007/s10973-018-7538-7

By:

Rabbani, Yahya;
Hajinajaf, Nima;
Tavakoli, Omid

Publication type:

Article

The oxidation kinetic study of mechanically milled ultrafine iron powders by thermogravimetric analysis.

Published in:

Journal of Thermal Analysis & Calorimetry, 2018, v. 134, n. 1, p. 307, doi. 10.1007/s10973-018-7451-0

By:

Lysenko, Elena N.;
Surzhikov, Anatoly P.;
Nikolaev, Evgeniy V.;
Vlasov, Vitaly A.;
Zhuravkov, Sergey P.

Publication type:

Article

Solvent-cast 4D printing and characterization of styrene-ethylene-butylene-styrene-based magnetorheological elastomeric material.

Published in:

Journal of Materials Science, 2024, v. 59, n. 46, p. 21556, doi. 10.1007/s10853-024-10442-9

By:

Kumar, Arun;
Pandey, Pulak Mohan;
Jha, Sunil;
Banerjee, Shib Shankar

Publication type:

Article

The correlation between particle size distribution of FeSiBCuNb powders and properties of soft magnetic composites.

Published in:

Journal of Materials Science, 2024, v. 59, n. 25, p. 11333, doi. 10.1007/s10853-024-09781-4

By:

Shi, Guibing;
Wang, Mingxu;
Li, Mengrui;
Wang, Li

Publication type:

Article

Interfacial characteristics and wear properties of laser fabricated Fe‒Al coatings on 6061 aluminum alloy.

Published in:

Journal of Materials Science, 2024, v. 59, n. 17, p. 7547, doi. 10.1007/s10853-024-09642-0

By:

Chi, Yiming;
Qian, Dahu;
Lu, Lu;
Yao, Jianhua;
Han, Boqun;
Chen, Chuanzhong

Publication type:

Article

Improvement of electromagnetic properties of FeSiAl soft magnetic composites.

Published in:

Journal of Materials Science, 2023, v. 58, n. 23, p. 9698, doi. 10.1007/s10853-023-08610-4

By:

Zhang, Cong;
Chen, Yanan;
Feng, Shuangjiu;
Kan, Xucai;
Zhu, Yong;
Li, Yue;
Sun, Wei;
Shen, Jibiao;
Liu, Xiansong

Publication type:

Article

Mill scale strengthened ABS composite filaments for 3D printing technology.

Published in:

Journal of Materials Science, 2023, v. 58, n. 9, p. 4165, doi. 10.1007/s10853-023-08274-0

By:

Tungtrongpairoj, Jennarong;
Doungkeaw, Korbkaroon;
Thavornyutikarn, Boonlom;
Uthaisangsuk, Vitoon

Publication type:

Article

Enhanced flame retardancy of rigid polyurethane foam via iron tailings and expandable graphite.

Published in:

Journal of Materials Science, 2022, v. 57, n. 40, p. 18853, doi. 10.1007/s10853-022-07817-1

By:

Yang, Yadong;
Sun, Po;
Sun, Junjie;
Wen, Panyue;
Zhang, Shihua;
Kan, Yongchun;
Liu, Xiuyu;
Tang, Gang

Publication type:

Article

Experimental study of dynamic DC stray current corrosion of X70 steel.

Published in:

Materials & Corrosion / Werkstoffe und Korrosion, 2023, v. 74, n. 1, p. 33, doi. 10.1002/maco.202213415

By:

Qin, Huimin;
Zhang, Tao;
Du, Yanxia;
Zhang, Lei;
Zhang, Yuxing;
Liu, Hui

Publication type:

Article

In situ synthesis of one eco‐friendly polyacrylic acid/zinc colloidal particles doped polyacrylic acid as an efficient corrosion inhibitor for iron.

Published in:

Materials & Corrosion / Werkstoffe und Korrosion, 2020, v. 71, n. 2, p. 267, doi. 10.1002/maco.201911044

By:

Gao, Xiang;
Li, Weihua;
Ma, Houyi

Publication type:

Article

The effect of spray-drying inlet conditions on iron encapsulation using hydrolysed glucomannan as a matrix.

Published in:

Food & Bioproducts Processing: Transactions of the Institution of Chemical Engineers Part C, 2020, v. 123, p. 72, doi. 10.1016/j.fbp.2020.05.013

By:

Wardhani, Dyah Hesti;
Wardana, Irsyadia Nindya;
Ulya, Hana Nikma;
Cahyono, Heri;
Kumoro, Andri Cahyo;
Aryant, Nita

Publication type:

Article

Enhanced Electromagnetic Wave Absorption Properties of Ultrathin MnO 2 Nanosheet-Decorated Spherical Flower-Shaped Carbonyl Iron Powder.

Published in:

Molecules, 2022, v. 27, n. 1, p. 135, doi. 10.3390/molecules27010135

By:

Qu, Zhengwei;
Wang, Yi;
Yang, Pingan;
Zheng, Wei;
Li, Nan;
Bai, Jingying;
Zhang, Youwei;
Li, Kailin;
Wang, Dashuang;
Liu, Zhaohui;
Yao, Kexin;
Li, Rui;
Zhang, Yuxin

Publication type:

Article

Mechanochemical Synthesis and Nitrogenation of the Nd 1.1 Fe 10 CoTi Alloy for Permanent Magnet.

Published in:

Molecules, 2021, v. 26, n. 13, p. 3854, doi. 10.3390/molecules26133854

By:

Martínez Sánchez, Hugo;
Hadjipanayis, George;
Pérez Alcázar, Germán Antonio;
Zamora Alfonso, Ligia Edith;
Trujillo Hernández, Juan Sebastián

Publication type:

Article

Experimental Investigation of the Fluidization Reduction Characteristics of Iron Particles Coated with Carbon Powder under Pressurized Conditions.

Published in:

Molecules, 2020, v. 25, n. 8, p. 1810, doi. 10.3390/molecules25081810

By:

Xu, Qiyan;
Li, Zhiping;
Gu, Zhanghan;
Faux, David;
Cardea, Stefano

Publication type:

Article

Enhanced Shielding Performance of Layered Carbon Fiber Composites Filled with Carbonyl Iron and Carbon Nanotubes in the Koch Curve Fractal Method.

Published in:

Molecules, 2020, v. 25, n. 4, p. 969, doi. 10.3390/molecules25040969

By:

Zhang, Hetong;
Guo, Yue;
Zhang, Xiang;
Wang, Xinqian;
Wang, Hang;
Shi, Chunsheng;
He, Fang

Publication type:

Article

The influence of iron stearate and sintering conditions on the structure and properties of powder alloy steel SP50S2KhF.

Published in:

Metallurgist, 2025, v. 68, n. 9, p. 1323, doi. 10.1007/s11015-024-01843-x

By:

Eremeeva, J. V.;
Ter-Vaganyants, Yu. S.

Publication type:

Article

Influence introducing various plasticizers into an initial charge on the structure and properties of iron-based powder materials alloyed with copper.

Published in:

Metallurgist, 2024, v. 67, n. 11/12, p. 1878, doi. 10.1007/s11015-024-01685-7

By:

Eremeeva, J. V.;
Ter-Vaganyants, Y. S.;
Korznikov, O. V.

Publication type:

Article

High-valued and deep utilization technology of copper slag.

Published in:

Metallurgist, 2022, v. 66, n. 7/8, p. 1015, doi. 10.1007/s11015-022-01414-y

By:

Xiao-Dong, Hao;
Jun, Zhang;
He-Min, Zhou

Publication type:

Article

Nanostructural Analysis and Adsorption Capacity of Blast-Furnace Slags.

Published in:

Metallurgist, 2022, v. 66, n. 3/4, p. 445, doi. 10.1007/s11015-022-01345-8

By:

Belov, B. F.;
Babanin, A. Ya.

Publication type:

Article

Structure and Properties of Surface Layers Obtained Via Nonvacuum Electron-Beam Cladding with Copper and Boron Powder Mixtures.

Published in:

Metallurgist, 2022, v. 65, n. 11/12, p. 1281, doi. 10.1007/s11015-022-01274-6

By:

Emurlaev, K. I.;
Golkovsky, M. G.;
Stepanova, N. V.;
Bataeva, Z. B.

Publication type:

Article

Investigation of Vanadium Titanomagnetite Concentrate Activated Reduction.

Published in:

Metallurgist, 2022, v. 65, n. 11/12, p. 1235, doi. 10.1007/s11015-022-01269-3

By:

Jun, Zhang;
Yuan-hong, Qi;
Din-liu, Yan;
Feng, Wang;
Xiang-li, Cheng

Publication type:

Article