Works matching DE "INVESTMENT casting"

Results: 324

Effect of Manufacturing Method and Post-Processing Heat Treatment on Compressive Mechanical Properties, Failure Mechanism, and Microstructure of AlSi10Mg Strut-Based Lattice Structures.

Published in:

International Journal of Metalcasting, 2025, v. 19, n. 4, p. 2244, doi. 10.1007/s40962-024-01471-w

By:

Ghaemi Khiavi, Sina;
Mohammad Sadeghi, Bagher;
Divandari, Mehdi

Publication type:

Article

Microstructural Analysis of Non-Metallic Inclusions in Atmosphere Melted and Poured Stainless Steel Investment Castings.

Published in:

International Journal of Metalcasting, 2025, v. 19, n. 4, p. 2443, doi. 10.1007/s40962-024-01467-6

By:

Liu, Yahui;
Fan, Qingjing;
Liu, Yanan;
Ning, Ying;
Zhang, Junhui;
Yu, Huipeng;
Zhu, Zhiwang;
Gao, Haiyan;
Wang, Jun

Publication type:

Article

Performance Evolution and Fracture Features of Sodium Silicate Shell Cured via Droplet-Based Microfluidics of Acetic Acid.

Published in:

International Journal of Metalcasting, 2025, v. 19, n. 4, p. 2029, doi. 10.1007/s40962-024-01439-w

By:

Zhong, Juan;
Liu, Chang;
Tian, Zhongxing;
Li, Silong;
Liu, Xiangdong

Publication type:

Article

Fabrication of a 6061 Aluminum Matrix Composite Material Reinforced with Residual Ceramic for Structural Purposes.

Published in:

Microscopy & Microanalysis, 2024, v. 30, p. 1, doi. 10.1093/mam/ozae044.134

By:

Soriano-Vargas, Orlando;
Mastache-Mastache, J Edmundo;
Lopez-Perrusquia, Noe;
Cabrera-Rodriguez, Ohtokani;
Miguel, Christopher René Torres-San;
Mora-Ramírez, Tomas de la;
Cayetano-Castro, Nicolas

Publication type:

Article

ДослІДЖення стрУКтУрниХ осоБливостеЙ ЖаромІЦного нІКелевого сплавУ Для лопатоК газотУрБІнного ДвигУна.

Published in:

Electrometallurgy Today / Sovremennaya Elektrometallurgiya, 2023, n. 2, p. 41, doi. 10.37434/sem2023.02.06

By:

Квасницька, Ю. Г.;
Мяльніца, Г. П.;
Квасницька, К. Г.;
Максюта, І. І.;
Нога, В. О.

Publication type:

Article

Effect of subsequent Hot Isostatic Pressing on mechanical properties of ASTM F75 alloy produced by Selective Laser Melting.

Published in:

Powder Metallurgy, 2015, v. 58, n. 3, p. 161, doi. 10.1179/0032589915Z.000000000236

By:

Haan, J.;
Asseln, M.;
Zivcec, M.;
Eschweiler, J.;
Radermacher, R.;
Broeckmann, C.

Publication type:

Article

Experimental and Simulation Analysis on the Mechanical Behavior of 3D‐Enhanced Al‐Based Tetrahedral Lattice Materials.

Published in:

Physica Status Solidi. A: Applications & Materials Science, 2023, v. 220, n. 1, p. 1, doi. 10.1002/pssa.202200580

By:

Xue, Yingying;
Mu, Jianhui;
Huang, Yingjie;
Shi, Zimu

Publication type:

Article

Optimization of investment casting parameters for reduction of shrinkage porosity in nickel-based superalloy castings by Taguchi method.

Published in:

International Journal of Modern Physics B: Condensed Matter Physics; Statistical Physics; Applied Physics, 2021, v. 35, n. 10, p. N.PAG, doi. 10.1142/S0217979221501368

By:

Zhang, Peng;
Liu, Guohuai;
Wang, Ye;
Wu, Shiping;
Wang, Zhaodong

Publication type:

Article

Computer-aided modeling and experimental verification of optimal gating system design for investment casting of precision rotor.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 79, n. 5-8, p. 997, doi. 10.1007/s00170-015-6897-5

By:

Huang, Pei-Hsing;
Lin, Chi-Ju

Publication type:

Article

Influence of complex structure on the shrinkage of part in investment casting process.

Published in:

International Journal of Advanced Manufacturing Technology, 2015, v. 77, n. 5-8, p. 1191, doi. 10.1007/s00170-014-6523-y

By:

Liu, Changhui;
Jin, Sun;
Lai, Xinmin;
He, Bo;
Li, Fei

Publication type:

Article

Effect of vibration after filling on mechanical reliability in thin wall investment casting with fillability filling regime-part 1.

Published in:

International Journal of Advanced Manufacturing Technology, 2013, v. 67, n. 9-12, p. 2075, doi. 10.1007/s00170-012-4632-z

By:

Abdul-Karem, Waleed;
Green, N.;
Al-Raheem, Khalid;
Hasan, Abbas

Publication type:

Article

Multi-characteristic optimization of wax patterns in the investment casting process using grey-fuzzy logic.

Published in:

International Journal of Advanced Manufacturing Technology, 2013, v. 67, n. 5-8, p. 1577, doi. 10.1007/s00170-012-4591-4

By:

Pattnaik, Sarojrani;
Karunakar, D.;
Jha, P.

Publication type:

Article

Optimal gating system design for investment casting of sterling silver by computer-assisted simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2013, v. 67, n. 1-4, p. 797, doi. 10.1007/s00170-012-4523-3

By:

Thammachot, N.;
Dulyapraphant, P.;
Bohez, E.

Publication type:

Article

Design, Manufacturing, and Open-Loop Control of a Soft Pneumatic Arm.

Published in:

Actuators, 2024, v. 13, n. 1, p. 36, doi. 10.3390/act13010036

By:

García-Samartín, Jorge Francisco;
Rieker, Adrián;
Barrientos, Antonio

Publication type:

Article

Microstructural Investigation of Stress-Induced Degradation of Gamma and Gamma Prime Phases on the Surface of the Aerofoil of Nickel-Based Single Crystal Superalloy Turbine Blades.

Published in:

Crystals (2073-4352), 2025, v. 15, n. 6, p. 553, doi. 10.3390/cryst15060553

By:

Park, KeeHyun;
Davies, Jonathan;
Withey, Paul

Publication type:

Article

An Overview on Synthesis, Processing and Applications of Nickel Aluminides: From Fundamentals to Current Prospects.

Published in:

Crystals (2073-4352), 2023, v. 13, n. 3, p. 435, doi. 10.3390/cryst13030435

By:

Sampath, Santosh;
Ravi, Vignesh Pandian;
Sundararajan, Srivatsan

Publication type:

Article

Analysis of Microstructure and Mechanical Properties in As-Built/As-Cast and Heat-Treated Conditions for IN718 Alloy Obtained by Selective Laser Melting and Investment Casting Processes.

Published in:

Crystals (2073-4352), 2021, v. 11, n. 10, p. 1196, doi. 10.3390/cryst11101196

By:

Pereira, Juan Carlos;
Aranzabe, Jon;
Taboada, Mari Carmen;
Ruiz, Noelia;
Rodriguez, Pedro Pablo

Publication type:

Article

Evaluating Silicon Carbide-Based Slurries and Molds for the Manufacture of Aircraft Turbine Components by the Investment Casting.

Published in:

Crystals (2073-4352), 2020, v. 10, n. 6, p. 433, doi. 10.3390/cryst10060433

By:

Wiśniewski, Paweł

Publication type:

Article

Study of Ceramic Hollow Buoyant Balls Prepared Based on Slip Mold Casting and Brazing Process.

Published in:

Coatings (2079-6412), 2024, v. 14, n. 6, p. 767, doi. 10.3390/coatings14060767

By:

Lei, Yu;
Zhou, Jian;
Liu, Guizhen;
Wang, Lin;
Ding, Zhongjun

Publication type:

Article

Investigation of the Biocompatibility of Laser Treated 316L Stainless Steel Materials.

Published in:

Coatings (2079-6412), 2022, v. 12, n. 12, p. 1821, doi. 10.3390/coatings12121821

By:

Aykac, Emre;
Turkmen, Mustafa

Publication type:

Article

Phase Changing Material Used with RP Technology in Quick Wax Molding for Investment Casting.

Published in:

Computer-Aided Design & Applications, 2012, v. 9, n. 3, p. 409, doi. 10.3722/cadaps.2012.409-418

By:

Songhao Wang;
Millogo, Joseph D.

Publication type:

Article

Effect of incorporation of zirconia layer upon physical and mechanical properties of investment casting ceramic shell.

Published in:

Materials Science & Technology, 2013, v. 29, n. 1, p. 30, doi. 10.1179/1743284712Y.0000000076

By:

Yuan, C;
Withey, P A;
Blackburn, S

Publication type:

Article

Microstructural, mechanical and electrochemical characterisation of biomaterial ASTM F745 cast by vacuum.

Published in:

Materials Science & Technology, 2012, v. 28, n. 6, p. 742, doi. 10.1179/1743284712Y.0000000003

By:

Gregorutti, R W;
Grau, J E;
Elsner, C I

Publication type:

Article

Sound absorption of open celled aluminium foam fabricated by investment casting method.

Published in:

Materials Science & Technology, 2011, v. 27, n. 4, p. 800, doi. 10.1179/026708309X12506934374047

By:

Wang, X F;
Wei, X;
Han, F S;
Wang, X L

Publication type:

Article

Prospects of Obtaining Removable Models by Pressing Wax-Like Materials under the Influence of Centrifugal Forces.

Published in:

Metallurgist, 2023, v. 67, n. 5/6, p. 814, doi. 10.1007/s11015-023-01567-4

By:

Zhilin, S. G.;
Bogdanova, N. A.;
Firsov, S. V.;
Komarov, O. N.

Publication type:

Article

Complex Geometry Cellulose Hydrogels Using a Direct Casting Method.

Published in:

Bioengineering (Basel), 2020, v. 7, n. 2, p. 1, doi. 10.3390/bioengineering7020058

By:

Zadeh, Hossein Najaf;
Huber, Tim;
Nock, Volker;
Fee, Conan;
Clucas, Don

Publication type:

Article

Modern Reverse Engineering Methods Used to Modification of Jewelry.

Published in:

Advances in Science & Technology Research Journal, 2020, v. 14, n. 4, p. 298, doi. 10.12913/22998624/128006

By:

Kroma, Arkadiusz;
Adamczak, Oliwia;
Sika, Robert;
Górski, Filip;
Kuczko, Wiesław;
Grześkowiak, Krzysztof

Publication type:

Article

INFLUENCE OF THE QUALITY OF MODELS MADE BY ADDITIVE TECHNOLOGIES ON THE QUALITY OF CASTINGS CAST BY INVESTMENT CASTING.

Published in:

Annals of DAAAM & Proceedings, 2020, v. 31, p. 467, doi. 10.2507/31st.daaam.proceedings.066

By:

Bricín, David;
Votava, Filip;
Kubátová, Dana;
Kříž, Antonín

Publication type:

Article

THE APPLICATION OF THERMOGRAPHIC DIAGNOSTIC IN INVESTMENT CASTING PROCESS.

Published in:

Annals of DAAAM & Proceedings, 2017, v. 28, p. 1118, doi. 10.2507/28th.daaam.proceedings.156

By:

Vrátný, Ondřej;
Herman, Aleš;
Kubelková, Irena

Publication type:

Article

Fabrication of titanium restoration by means of calcium aluminate-bonded magnesia investment material and one-chamber arc casting apparatus.

Published in:

2021

By:

Mika Furuchi;
Yoshimasa Takeuchi;
Atsushi Kamimoto;
Hideo Matsumura;
Hideyuki Imai;
Hiroyasu Koizumi;
Furuchi, Mika;
Takeuchi, Yoshimasa;
Kamimoto, Atsushi;
Matsumura, Hideo;
Imai, Hideyuki;
Koizumi, Hiroyasu

Publication type:

journal article

High Temperature Oxidation Behavior of Conventional and Nb-Modified MAR-M246 Ni-Based Superalloy.

Published in:

Metallurgical & Materials Transactions. Part A, 2021, v. 52, n. 6, p. 2589, doi. 10.1007/s11661-021-06252-2

By:

Alkmin, L. B.;
Chaia, N.;
Utada, S.;
Cormier, J.;
Baldan, R.;
Coelho, G.;
Nunes, C. A.

Publication type:

Article

Formation of Alpha-Case Layer During Investment Casting of Pure Ti and Ti-6Al-4V Using Comparative XRD and EXAFS Investigation.

Published in:

Metallurgical & Materials Transactions. Part A, 2020, v. 51, n. 2, p. 586, doi. 10.1007/s11661-019-05541-1

By:

Boonchuduang, Thanachai;
Bootchanont, Atipong;
Klysubun, Wantana;
Amonpattaratkit, Penphitcha;
Khamkongkaeo, Atchara;
Puncreobutr, Chedtha;
Yimnirun, Rattikorn;
Lohwongwatana, Boonrat

Publication type:

Article

Physical Simulation of Investment Casting of Complex Shape Parts.

Published in:

Metallurgical & Materials Transactions. Part A, 2015, v. 46, n. 5, p. 2227, doi. 10.1007/s11661-015-2815-6

By:

Rahimian, Mehdi;
Milenkovic, Srdjan;
Maestro, Laura;
Azua, Aitor;
Sabirov, Ilchat

Publication type:

Article

The Influence of ZrO Concentration in an Yttria-Based Face Coat for Investment Casting a Ti-45Al-2Mn-2Nb-0.2TiB Alloy Using a Sessile Drop Method.

Published in:

Metallurgical & Materials Transactions. Part A, 2015, v. 46, n. 3, p. 1328, doi. 10.1007/s11661-014-2724-0

By:

Cheng, Xu;
Yuan, Chen;
Blackburn, Stuart;
Withey, Paul

Publication type:

Article

A Comparison of the Chemical Inertness of Two YO-AlO-ZrO and YO-AlO Face Coat Materials Through Sessile Drop and Investment Casting Methods.

Published in:

Metallurgical & Materials Transactions. Part A, 2014, v. 45, n. 7, p. 3116, doi. 10.1007/s11661-014-2261-x

By:

Cheng, Xu;
Yuan, Chen;
Blackburn, Stuart;
Withey, Paul

Publication type:

Article

Effects of Section Size, Surface Cooling Conditions, and Crucible Material on Microstructure and As-Cast Properties of Investment Cast Co-Cr Biomedical Alloy.

Published in:

Metallurgical & Materials Transactions. Part A, 2013, v. 44, n. 12, p. 5333, doi. 10.1007/s11661-013-1825-5

By:

Kaiser, Ruth;
Williamson, Kenny;
O'Brien, Claire;
Browne, David

Publication type:

Article

Analysis of emission of volatile organic compounds and thermal degradation in investment casting using fused deposition modeling (FDM) and three-dimensional printing (3DP) made of various thermoplastic polymers.

Published in:

Environmental Science & Pollution Research, 2024, v. 31, n. 50, p. 60371, doi. 10.1007/s11356-024-35200-x

By:

Hejna, Aleksander;
Marć, Mariusz;
Szymański, Paweł;
Mizera, Kamila;
Barczewski, Mateusz

Publication type:

Article

A Closed-Loop Recycling Technology for γ-TiAl from Precision Cast Low Pressure Turbine Blades.

Published in:

Chemie Ingenieur Technik (CIT), 2015, v. 87, n. 11, p. 1580, doi. 10.1002/cite.201500063

By:

Spiess, Peter;
Bartosinski, Marek;
Stoyanov, Todor;
Aguilar, Julio;
Friedrich, Bernd

Publication type:

Article

Experimental and numerical investigation of shell mold deformation and compensation measure in precision casting of 316L stainless steel manifold.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 9, p. 4043, doi. 10.1007/s00170-025-15750-1

By:

Lin, Chieh-Fong;
Kao, Chia-Yu;
Chen, Chen-Ming;
Saputro, Imang Eko;
Mardiono, Intan;
Khoiruddin, Sukhoiri;
Huang, Cheng-Fu;
Lee, Sheng-Chan;
Chan, Chien-Wei;
Fuh, Yiin-Kuen

Publication type:

Article

Insight into the solidification behavior of the C101 Ni-based superalloy fabricated through vacuum lost-wax casting.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 5, p. 2697, doi. 10.1007/s00170-025-15307-2

By:

Grudzień-Rakoczy, Małgorzata;
Rakoczy, Łukasz;
Cempura, Grzegorz;
Chrzan, Konrad;
Żuczek, Robert;
Oleksy, Wacław;
Cygan, Rafał

Publication type:

Article

Investment casting of porous Mg-alloy networks biomechanically tuned for bone implant applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 7/8, p. 3473, doi. 10.1007/s00170-024-14658-6

By:

Dmitruk, Anna;
Díaz Lantada, Andrés;
Ferraris, Sara;
Łobacz-Raźny, Natalia;
Spriano, Silvia;
Naplocha, Krzysztof

Publication type:

Article

Rapid investment casting of nano-treated aluminum alloy 2024.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 1/2, p. 473, doi. 10.1007/s00170-024-14529-0

By:

Chi, Yitian;
Murali, Narayanan;
Chen, Guan-Cheng;
Li, Xiaochun

Publication type:

Article

Metal casting using soluble pattern produced via additive manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 7/8, p. 3905, doi. 10.1007/s00170-024-14339-4

By:

Mittal, Yash Gopal;
Patil, Yogesh;
Kamble, Pushkar;
Gote, Gopal;
Mehta, Avinash Kumar;
Karunakaran, Karuppasamy Poolan

Publication type:

Article

Comparative evaluation of insulation cotton configurations on the investment casting quality of industrial valve parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 3/4, p. 1179, doi. 10.1007/s00170-024-14178-3

By:

Chen, Kao-Yi;
Khoiruddin, Sukhoiri;
Lin, Chieh-Fong;
Ho, Ming-Hsiu;
Huang, Cheng-Fu;
Lee, Sheng-Chan;
Chan, Chien-Wei;
Mardiono, Intan;
Fuh, Yiin-Kuen

Publication type:

Article

Effect of mold dwell time on shrinkage defects in investment casting of superalloy turbine blade.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 9/10, p. 4473, doi. 10.1007/s00170-024-13659-9

By:

Zhao, Daiyin;
Wang, Donghong;
Zhou, Leyao;
Lin, Lishibao;
Zeng, Hong;
Gong, Xiufang;
Ding, Zhengyi;
Shu, Da;
Sun, Baode

Publication type:

Article

Cooling efficiency enhancement using a rapid tool with a surface-cooled waterfall cooling channel.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 3/4, p. 1127, doi. 10.1007/s00170-024-13429-7

By:

Kuo, Chil-Chyuan;
Lin, Pin-Han;
Xu, Jing-Yan;
Lin, Zhe-Xhi;
Wang, Zi-Huan;
Lai, Zhi-Jun;
Huang, Song-Hua

Publication type:

Article

Semi-solid plasticity and deformation control of superalloy investment casting.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 7/8, p. 3419, doi. 10.1007/s00170-023-12828-6

By:

Ding, Zhengyi;
Wang, Donghong;
Guan, Bang;
Cui, Jiayu;
Shu, Da;
Sun, Baode

Publication type:

Article

Improvement of quality and yield for investment casting of centrifugal pump impeller by tilting mold and optimizing runner/riser system.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 5/6, p. 2369, doi. 10.1007/s00170-023-12839-3

By:

Kim, Yu-Chol;
Paek, Nong-I.;
Ri, Bok-Gyu;
O, Rim-Hyok

Publication type:

Article

Integrated computational framework for controlling dimensional accuracy of thin-walled turbine blades during investment casting.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 3/4, p. 1315, doi. 10.1007/s00170-023-12319-8

By:

Zhao, Daiyin;
Zhou, Leyao;
Wang, Donghong;
Zeng, Hong;
Gong, Xiufang;
Shu, Da;
Sun, Baode

Publication type:

Article

Castability of Cu-Al-Mn shape memory alloy in a rapid investment casting process: computational and experimental analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 5/6, p. 2563, doi. 10.1007/s00170-023-11672-y

By:

da Silva Albuquerque, Carlos Eduardo;
Grassi, Estephanie Nobre Dantas;
De Araújo, Carlos José

Publication type:

Article