Works matching DE "INJECTION molding of metals"

Results: 634

Effects of Fixed Orthodontic Treatment Using Conventional, Copper-Included, and Epoxy-Coated Nickel-Titanium Archwires on Salivary Nickel Levels: A Double-Blind Randomized Clinical Trial.

Published in:

Biological Trace Element Research, 2016, v. 174, n. 1, p. 27, doi. 10.1007/s12011-016-0690-7

By:

Rakhshan, Vahid;
Khaneh Masjedi, Mashallah;
Niknam, Ozra;
Haghighat Jahromi, Nima;
Javidi, Pedram

Publication type:

Article

Effect of Sintering Environment on Microstructures and Mechanical Properties of Metal Injection Molding Ti-6Al-4V Alloys.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 4, p. 2053, doi. 10.1007/s11837-024-06395-8

By:

Li, Chuanyong;
Li, Lu;
Zhang, Weichen;
Guo, Xiuhu;
Yuan, Zhentao;
Wang, Xiao;
Chen, Gang;
Cao, Peng

Publication type:

Article

Properties of Water Atomized 25Cr7Ni Stainless Steel Processed by Laser-Powder Bed Fusion.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 5, p. 1710, doi. 10.1007/s11837-023-05771-0

By:

Arumugham Akilan, Arulselvan;
Gal, Chang Woo;
Nath, Subrata Deb;
Gokce, Azim;
Chalasani, Dharmendra;
Gupta, Gautam;
Stanely, Jerome;
Park, Seong Jin;
Balla, Vamsi Krishna;
Atre, Sundar V.

Publication type:

Article

Effect of Jet Milling on HDH CP-Ti Powders: Microstructure and Properties.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 10, p. 3102, doi. 10.1007/s11837-021-04789-6

By:

Tao, Qiying;
Ding, Wangwang;
Chen, Gang;
Qu, Xuanhui;
Han, Lihui;
Qin, Mingli

Publication type:

Article

Effects of Trace Carbon Contents on Lattice Distortion and Nano-Copper Phase Precipitation in Metal Injection-Molded 17-4PH Stainless Steel.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 3, p. 1073, doi. 10.1007/s11837-018-3302-5

By:

Lou, Jia;
He, Hao;
Li, Yimin;
Zhang, Hao;
Fang, Zhijie;
Wei, Xiansheng

Publication type:

Article

Technological Innovations of Carbon Dioxide Injection in EAF-LF Steelmaking.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 6, p. 969, doi. 10.1007/s11837-018-2814-3

By:

Wei, Guangsheng;
Zhu, Rong;
Wu, Xuetao;
Dong, Kai;
Yang, Lingzhi;
Liu, Runzao

Publication type:

Article

Metal Injection Molding of Thin-Walled Titanium Glasses Arms: A Case Study.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 5, p. 616, doi. 10.1007/s11837-018-2788-1

By:

Mo, Wei;
Lv, Yonghu;
Li, Xia;
Yu, Peng;
Ye, Shulong;
Kwok, Chi Tat

Publication type:

Article

Experimental and Numerical Analysis of Injection Molding of Ti-6Al-4V Powders for High-Performance Titanium Parts.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 5, p. 621, doi. 10.1007/s11837-018-2786-3

By:

Lin, Dongguo;
Han, Jun Sae;
Park, Seong Jin;
Kang, Tae Gon;
Chung, Seong Taek;
Kwon, Young-Sam

Publication type:

Article

Powder Metallurgy of Non-Ferrous Metals: Part I.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 5, p. 614, doi. 10.1007/s11837-018-2817-0

By:

Qian, M.

Publication type:

Article

Sintering Behavior and Microstructure Formation of Titanium Aluminide Alloys Processed by Metal Injection Molding.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2017, v. 69, n. 4, p. 676, doi. 10.1007/s11837-016-2252-z

By:

Soyama, Juliano;
Oehring, Michael;
Ebel, Thomas;
Kainer, Karl;
Pyczak, Florian

Publication type:

Article

Powder Injection Molding of Ceria-Stabilized, Zirconia-Toughened Mullite Parts for UAV Engine Components.

Published in:

2013

By:

Martin, Renee;
Vick, Michael;
Enneti, Ravi;
Atre, Sundar

Publication type:

Editorial

Metal Injection Molding of Alloy 718 for Aerospace Applications.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2012, v. 64, n. 2, p. 252, doi. 10.1007/s11837-012-0246-z

By:

Ott, Eric;
Peretti, Michael

Publication type:

Article

Metal injection molding of titanium for medical and aerospace applications.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2011, v. 63, n. 2, p. 94, doi. 10.1007/s11837-011-0036-z

By:

Scharvogel, Matthias;
Winkelmueller, Wendelin

Publication type:

Article

USING ATTACHMENT SYSTEMS LIKE TRANSDUCERS TO ANALYZE THE FORCES THAT TAKE PLACE IN THE INJECTION PROCESS.

Published in:

Experimental Techniques, 2009, v. 33, n. 4, p. 21, doi. 10.1111/j.1747-1567.2008.00398.x

By:

Castany, J.;
Mercado, D.;
Serraller, F.;
Fuentelsaz, J.

Publication type:

Article

The analysis of gas evolved from casting powder during heating in the mold.

Published in:

Journal of Thermal Analysis & Calorimetry, 2020, v. 139, n. 2, p. 877, doi. 10.1007/s10973-019-08468-2

By:

Kargul, Tomasz

Publication type:

Article

Application of thermal analysis in the selection of polymer components used as a binder for metal injection moulding of Co-Cr-Mo alloy powder.

Published in:

Journal of Thermal Analysis & Calorimetry, 2018, v. 134, n. 1, p. 391, doi. 10.1007/s10973-018-7543-x

By:

Matula, Grzegorz;
Tomiczek, Błażej;
Król, Mariusz;
Szatkowska, Aleksandra;
Sotomayor, Maria Eugenia

Publication type:

Article

Influence of high molecular weight component on the hierarchical crystalline structures of injection-molded bars of polyethylene.

Published in:

Polymer International, 2014, v. 63, n. 8, p. 1513, doi. 10.1002/pi.4659

By:

Wang, Long;
Yang, Ming ‐ Bo

Publication type:

Article

Tailoring toughness of injection molded bar of polypropylene random copolymer through processing melt temperature.

Published in:

Polymer International, 2011, v. 60, n. 12, p. 1705, doi. 10.1002/pi.3135

By:

Luo, Feng;
Wang, Ke;
Wang, Jinwen;
Deng, Hua;
Zhang, Qin;
Chen, Feng;
Fu, Qiang;
Na, Bing

Publication type:

Article

Modern Vacuum Pumps for the Vacuum Degassing of Steel in Small and Large Vacuum-Degassing Units.

Published in:

Metallurgist, 2013, v. 57, n. 5/6, p. 516, doi. 10.1007/s11015-013-9762-5

By:

Burgmann, W.;
Göhler, K.

Publication type:

Article

Use of injection technologies for the out-of-furnace desulfurization of vanadium-bearing pig iron/semifinished product in the converter shop at the nizhniy tagil metallurgical combine.

Published in:

Metallurgist, 2004, v. 48, n. 9/10, p. 503, doi. 10.1007/s11015-005-0015-0

By:

Kushnarev, A.

Publication type:

Article

Development of Porous Material and Hybrid Porous Ti6Al4V Dental Implants using Metal Injection Molding (MIM).

Published in:

Journal of Mechanical Engineering (1823-5514), 2024, v. 21, n. 1, p. 105, doi. 10.24191/jmeche.v21i1.25362

By:

Supriadi, Sugeng;
Widiantoro, Ana Wilda;
Jones, Daniel;
Zuhdi, Muhammad Faiq

Publication type:

Article

Rheological, Mechanical and Physical Properties of Poly-Lactic Acid (PLA)/ Hydroxyapatites (HA) Composites Prepared by an Injection Moulding Process.

Published in:

Journal of Mechanical Engineering (1823-5514), 2022, v. 19, n. 2, p. 17, doi. 10.24191/jmeche.v19i2.19669

By:

Marzuki, Afeeqa Puteri;
Salleh, Farrahshaida Mohd;
Rosli, Muhammad Nazri Shah;
Tharazi, Izdihar;
Abdullah, Abdul Hakim;
Abdul Halim, Nurul Hayati

Publication type:

Article

Thermal Pyrolysis Optimization for Highest Density of Ti-6Al-4V Mix with Palm Stearin and Polyethylene.

Published in:

Journal of Mechanical Engineering (1823-5514), 2020, v. 9, p. 205

By:

Mohamad Nor, N. H.;
Husain, H.;
Shawal, S.;
Meon, M. S.;
Saedon, J. B.;
Ninshu Ma

Publication type:

Article

Optimising sintering parameters on the characteristic of injection moulded 316L stainless steel utilising water soluble system.

Published in:

Journal of Mechanical Engineering (1823-5514), 2019, v. 8, p. 48

By:

Omar, Nurul Farhana;
Wahab, Nor'Aini;
Ahmad, Ismail Nasirudin;
Sulong, Nurulsaidatulsyida

Publication type:

Article

The Study of Sintering Behavior of Stainless Steel 17-4PH-Stainless Steel 316L for Two Materials Powders Injection Molding (2C-PIM) Process.

Published in:

Journal of Mechanical Engineering (1823-5514), 2019, v. 16, n. 3, p. 67, doi. 10.24191/jmeche.v16i3.15347

By:

Mas'ood, Najlaa Nazihah;
Sulong, Abu Bakar;
Muhamad, Norhamidi;
Foudzi, Farhana Mohd;
Salleh, Farrahshaida Mohd

Publication type:

Article

Sintered Strength of Ti-6Al-4V by Metal Injection Molding (MIM) using Palm Stearin Binder.

Published in:

Journal of Mechanical Engineering (1823-5514), 2019, v. 16, n. 1, p. 135, doi. 10.24191/jmeche.v16i1.6044

By:

N. H. Mohamad Nor;
Ismail, M. H.;
Husain, H.;
Saedon, J. B.;
Newishy, M.

Publication type:

Article

Effect of Sintering Temperatures on Microstructural Changes and Phase Transformation of Nearly Equiatomic Microporous NiTi Alloy Produced by Metal Injection Moulding.

Published in:

Journal of Mechanical Engineering (1823-5514), 2018, v. 5, p. 115

By:

Maso'od, Mashitah;
Ismail, Muhammad Hussain;
Razali, Rosliza;
Subuki, Istiqamah

Publication type:

Article

Parameter Optimization of Metal Injection Moulding: A Review.

Published in:

Journal of Mechanical Engineering (1823-5514), 2018, v. 5, p. 100

By:

Prathabrao, M.;
Ibrahim, M. H. I.;
Amin, Sri Yulis M.;
Othman, M. H.

Publication type:

Article

Optimizing Sintering Process to Produce Highest Density of Porous Ti-6Al-4V.

Published in:

Journal of Mechanical Engineering (1823-5514), 2018, v. 5, p. 44

By:

Nor Hafiez Mohamad Nor;
Muhammad Husain Ismail;
Husain, Hazran;
Saedon, Juri;
Yahaya, Mohd Azman

Publication type:

Article

Modified palm stearin compatibilized natural rubber/halloysite nanotubes composites: Reinforcement versus strain-induced crystallization.

Published in:

Journal of Elastomers & Plastics, 2021, v. 53, n. 3, p. 210, doi. 10.1177/0095244320928573

By:

Jehsoh, Nureeyah;
Surya, Indra;
Sahakaro, Kannika;
Ismail, Hanafi;
Hayeemasae, Nabil

Publication type:

Article

events.

Published in:: 2014
Publication type:: Calendar

MIM specialist expands Colorado operations.

Published in:: Acta Physica Polonica: A, 2014, v. 125, n. 2, p. 12
Publication type:: Article

Centorr Vacuum Industries increases MIM furnace sales.

Published in:: Acta Physica Polonica: A, 2014, v. 125, n. 2, p. 12
Publication type:: Article

MEETINGS AND CONFERENCES.

Published in:: International Journal of Powder Metallurgy, 2025, v. 61, n. 2, p. 55
Publication type:: Article

MEETINGS AND CONFERENCES.

Published in:: International Journal of Powder Metallurgy, 2025, v. 61, n. 1, p. 63
Publication type:: Article

International Conference on Injection Molding of Metals, Ceramics and Carbides: February 24-26, 2025: Hilton Orange County/Costa Mesa, CA.

Published in:: International Journal of Powder Metallurgy, 2025, v. 61, n. 1, p. 9
Publication type:: Article

METAL INJECTION MOLDING TRENDS.

Published in:

International Journal of Powder Metallurgy, 2025, v. 61, n. 1, p. 5

By:

Bulger, Matthew

Publication type:

Article

EDITOR'S NOTE.

Published in:

International Journal of Powder Metallurgy, 2025, v. 61, n. 1, p. 2

By:

James, W. Brian

Publication type:

Article

MEMBER SPOTLIGHT ON ... SALVATOR NIGARURA.

Published in:: International Journal of Powder Metallurgy, 2024, v. 60, n. 4, p. 4
Publication type:: Article

MEETINGS AND CONFERENCES.

Published in:: International Journal of Powder Metallurgy, 2024, v. 60, n. 3, p. 61
Publication type:: Article

RECENT DEVELOPMENTS IN MPIF MATERIALS AND TEST METHOD STANDARDS.

Published in:

International Journal of Powder Metallurgy, 2024, v. 60, n. 3, p. 49

By:

James, W. Brian

Publication type:

Article

STATE OF THE PM INDUSTRY IN NORTH AMERICA--2024.

Published in:

International Journal of Powder Metallurgy, 2024, v. 60, n. 3, p. 27

By:

Stucky, Michael

Publication type:

Article

PM DESIGN EXCELLENCE AWARDS--2024.

Published in:

International Journal of Powder Metallurgy, 2024, v. 60, n. 3, p. 5

By:

James, W. Brian

Publication type:

Article

MEMBER SPOTLIGHT ON ... EUGENE A. OLEVSKY.

Published in:: International Journal of Powder Metallurgy, 2024, v. 60, n. 2, p. 4
Publication type:: Article

EDITOR'S NOTE.

Published in:

International Journal of Powder Metallurgy, 2024, v. 60, n. 2, p. 2

By:

James, W. Brian

Publication type:

Article

EDITOR'S NOTE.

Published in:

International Journal of Powder Metallurgy, 2023, v. 59, n. 4, p. 2

By:

James, W. Brian

Publication type:

Article

STATE OF THE PM INDUSTRY IN NORTH AMERICA--2023.

Published in:

International Journal of Powder Metallurgy, 2023, v. 59, n. 3, p. 31

By:

Brennen, Rodney

Publication type:

Article

RICHARD P. MASON.

Published in:: International Journal of Powder Metallurgy, 2023, v. 59, n. 3, p. 4
Publication type:: Article

RATIONAL CHOICE AND ORGANIZATIONAL THEORY APPLIED TO MIM COST ESTIMATIONS.

Published in:

International Journal of Powder Metallurgy, 2023, v. 59, n. 1, p. 31

By:

Bulger, Matthew

Publication type:

Article

PROCESSING OF COPPER BY EXTRUSION-BASED ADDITIVE MANUFACTURING.

Published in:

International Journal of Powder Metallurgy, 2023, v. 59, n. 1, p. 15

By:

Bose, Animesh;
Reidy, John P.;
Jorgensen, Luke;
Tuncer, Nihan

Publication type:

Article