Works about INJECTION molding

Results: 2705

Effect of Heat Transfer and Cooling Behavior on Opacity of Injection Molded Polyethylene Terephthalate (PET).

Published in:

Journal of Applied Polymer Science, 2025, v. 142, n. 25, p. 1, doi. 10.1002/app.57049

By:

Nathan, D. Kamala;
Prabhu, K. Narayan

Publication type:

Article

Explainable artificial intelligence and multi-stage transfer learning for injection molding quality prediction.

Published in:

Journal of Intelligent Manufacturing, 2025, v. 36, n. 5, p. 3587, doi. 10.1007/s10845-024-02436-w

By:

Lin, Chung-Yin;
Gim, Jinsu;
Shotwell, Demitri;
Lin, Mong-Tung;
Liu, Jia-Hau;
Turng, Lih-Sheng

Publication type:

Article

Numerical Process Simulation Validation of a Light Electronic Enclosure in Compliance With Required High‐Quality Standards by the Automotive Industry.

Published in:

Advances in Materials Science & Engineering, 2025, v. 2025, p. 1, doi. 10.1155/amse/5594618

By:

Araujo, Catia;
Cruz, Silvia;
Freitas, Ricardo;
Silva, Susana;
Portinha, Anibal;
Bernando, Pedro;
Rambo, Carlos R.

Publication type:

Article

Achieving Optimal Injection Molding Parameters to Minimize Both Shrinkage and Surface Roughness Through a Multi-Objective Optimization Approach.

Published in:

Applied Sciences (2076-3417), 2025, v. 15, n. 9, p. 5063, doi. 10.3390/app15095063

By:

Mukras, Saad M. S.;
Korany, Hussein Zein;
Omar, Hanafy M.

Publication type:

Article

Analyzing the Potential of Laser Femtosecond Technology for the Mass Production of Cyclic Olefin Copolymer Microfluidic Devices for Biomedical Applications.

Published in:

Polymers (20734360), 2025, v. 17, n. 9, p. 1289, doi. 10.3390/polym17091289

By:

Varela Leniz, Irene;
Bakouche, Taieb;
Astigarraga, Malen;
Husson, Florent;
Zaldua, Ane Miren;
Gemini, Laura;
Vilas-Vilela, José Luis;
Etxeberria, Leire

Publication type:

Article

Effect of Injection Molding Parameters on the Tensile Strength of Short-Carbon-Fiber-Reinforced Nylon 6.

Published in:

Polymers (20734360), 2025, v. 17, n. 9, p. 1264, doi. 10.3390/polym17091264

By:

Zhao, Runtian;
Li, Xiaodong;
Wang, Zhihui;
Wu, Ting;
Liang, Jianguo

Publication type:

Article

Multi-Objective Optimization of Thin-Walled Connectors in Injection Molding Process Based on Integrated Algorithms.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 1991, doi. 10.3390/ma18091991

By:

Peng, Size;
Tan, Mingbo;
Zhang, Daohong;
Li, Maojun

Publication type:

Article

NUMERICAL SIMULATION OF MICROCELLULAR INJECTION MOLDING: A CASE STUDY.

Published in:

Annals of "Dunarea de Jos" University of Galati, Fascicle XII, Welding Equipment & Technology, 2024, v. 35, p. 5, doi. 10.35219/awet.2024.01

By:

Chaabene, A.;
Khalifa, A. Ben;
Chatti, S.

Publication type:

Article

State Estimation Inside Injection Molds Using Data Assimilation and Computational Fluid Dynamics.

Published in:

International Journal of Automation Technology, 2025, v. 19, n. 3, p. 304, doi. 10.20965/ijat.2025.p0304

By:

Ohira, Yamato;
Sawa, Takekazu;
Murata, Yasuhiko

Publication type:

Article

Preparation of acetylated wood meal and polypropylene composites II: mechanical properties and dimensional stability of the composites.

Published in:

Journal of Wood Science, 2013, v. 59, n. 3, p. 216, doi. 10.1007/s10086-012-1316-0

By:

Kurimoto, Yasuji;
Sasaki, Sei

Publication type:

Article

Morphology of Microinjection Molded iPP Parts in Controlled Conditions.

Published in:

Macromolecular Symposia, 2022, v. 405, n. 1, p. 1, doi. 10.1002/masy.202100207

By:

Salomone, Rita;
Liparoti, Sara;
Speranza, Vito;
Pantani, Roberto

Publication type:

Article

Researches Regarding Modeling, Simulation, and Tensile Testing for Polymeric Composites Products.

Published in:

Macromolecular Symposia, 2022, v. 404, n. 1, p. 1, doi. 10.1002/masy.202100513

By:

Ion, Sorin Mihai;
Nițoi, Dan;
Peța, Luigi Madalin;
Opran, Constantin Gheorghe

Publication type:

Article

Characterization of the Properties of the Biocomposite Material 15 mass% HA/PLA.

Published in:

Macromolecular Symposia, 2022, v. 404, n. 1, p. 1, doi. 10.1002/masy.202100446

By:

Mihoc, Alexandru Bejinaru;
Repanovici, Angela;
Druga, Corneliu;
Serban, Ionel;
Mitu, Leonard;
Rosca, Ileana

Publication type:

Article

Effects of UV Aging, Water Storage and Recycling on Mechanical Properties of Biogenic Wood‐Plastic Composites from Polyamide 11.

Published in:

Macromolecular Symposia, 2022, v. 403, n. 1, p. 1, doi. 10.1002/masy.202100509

By:

Hirsch, Patrick;
Theumer, Torsten

Publication type:

Article

Data Acquisition and Generative Design for a Smart Spinal Orthosis.

Published in:

Macromolecular Symposia, 2021, v. 396, n. 1, p. 1, doi. 10.1002/masy.202000297

By:

Murzac, Roman;
Doicin, Cristian‐Vasile;
Ulmeanu, Mihaela‐Elena

Publication type:

Article

Lean Manufacturing 4.0 of Polymeric Injection Molding Products.

Published in:

Macromolecular Symposia, 2020, v. 389, n. 1, p. 1, doi. 10.1002/masy.201900109

By:

Dănuţ‐Sorin, Ionel R.;
Opran, Constantin Gheorghe;
Lamanna, Giuseppe

Publication type:

Article

Capability of Scratch Testing − A View on the Influence of Injection Molding, Water Absorption, and Blend Systems of Polymeric Materials.

Published in:

Macromolecular Symposia, 2019, v. 384, n. 1, p. N.PAG, doi. 10.1002/masy.201800176

By:

Moneke, Martin;
Seeger, Philipp;
Stengler, Ralph

Publication type:

Article

Direct Compounding Injection Molding and Resulting Properties of Ternary Blends of Polylactide, Polybutylene Succinate and Hydrogenated Styrene Farnesene Block Copolymers.

Published in:

Macromolecular Symposia, 2019, v. 384, n. 1, p. N.PAG, doi. 10.1002/masy.201800167

By:

Hirsch, Patrick;
Menzel, Matthias;
Klehm, Jessica;
Putsch, Peter

Publication type:

Article

Tribological Properties of Nanoclay Reinforced Polyamide‐6/Polypropylene Blend.

Published in:

Macromolecular Symposia, 2018, v. 379, n. 1, p. 1, doi. 10.1002/masy.201700022

By:

Mimaroglu, Abdullah;
Unal, Huseyin;
Yetgin, S. H.

Publication type:

Article

Nanomechanical Analysis of Nucleation Modified Isotactic Polypropylene.

Published in:

Macromolecular Symposia, 2018, v. 378, n. 1, p. 1, doi. 10.1002/masy.201600175

By:

Nowicki, Marek

Publication type:

Article

Process Influences on the Materials Interface of an Injection Molded Hard‐Soft‐Component.

Published in:

Macromolecular Symposia, 2018, v. 378, n. 1, p. 1, doi. 10.1002/masy.201600119

By:

Frick, Achim;
Spadaro, Marcel

Publication type:

Article

In-Situ Optical Scratch Analysis and Correlation Between Tangential Force and Scratch Behavior of Thermoplastic Injection Molded Plates.

Published in:

Macromolecular Symposia, 2017, v. 373, n. 1, p. n/a, doi. 10.1002/masy.201600125

By:

Szilágyi, Csongor;
Seeger, Philipp;
Moneke, Martin;
Stengler, Ralph

Publication type:

Article

Mechanical and Thermo-Mechanical Properties of Discontinuously and Continuously Processed Biogenic Wood-Plastic Composites from Polyamide 11 and Chemically Modified Beech Particles.

Published in:

Macromolecular Symposia, 2017, v. 373, n. 1, p. n/a, doi. 10.1002/masy.201600118

By:

Zierdt, Patrick;
Kulkarni, Gaurav;
Theumer, Torsten

Publication type:

Article

Characterization of PP/TPV/MMT Ternary Nanocomposites Produced by Injection Molding.

Published in:

Macromolecular Symposia, 2017, v. 373, n. 1, p. n/a, doi. 10.1002/masy.201600153

By:

Costantino, Maria A.;
Rueda, Frederico;
Pettarin, Valeria;
Frontini, Patricia M.;
Pontes, Antonio J.;
Viana, Julio C.

Publication type:

Article

Double Layer Porous Structures by an Injection Molding/Particulate Leaching Approach.

Published in:

Macromolecular Symposia, 2014, v. 346, n. 1, p. 100, doi. 10.1002/masy.201400158

By:

Saatchi, Mersa;
Behl, Marc;
Lendlein, Andreas

Publication type:

Article

Effects of Glycerol Tribenzoate on the Mechanical Properties and Reaction Characteristics of Al/THV Reactive Materials Prepared by Extrusion‐Injection Molding.

Published in:

Propellants, Explosives, Pyrotechnics, 2022, v. 47, n. 12, p. 1, doi. 10.1002/prep.202200073

By:

Xu, Shupeng;
Wang, Yinjie;
Zhao, Xiuchen;
Yang, Zenglin;
Ning, Xianjin;
Tan, Chengwen

Publication type:

Article

Experimental and Numerical Analysis of Single Screw Extrusion Process for Thermoplastic PBX Based on PVT Properties.

Published in:

Propellants, Explosives, Pyrotechnics, 2022, v. 47, n. 11, p. 1, doi. 10.1002/prep.202200093

By:

Bu, Yufan;
Chen, Chunyan;
Jiang, Fan;
Wang, Xiaofeng;
Che, Defu;
Nan, Hai

Publication type:

Article

Advanced Processing – The Changing Face of Manufacturing.

Published in:

Propellants, Explosives, Pyrotechnics, 2020, v. 45, n. 1, p. 7, doi. 10.1002/prep.201981231

By:

Cumming, Adam S.

Publication type:

Article

Electrochemical Exfoliation of Graphene and Formation of its Copolyamide 6/66 Nanocomposites by Wet Phase Inversion and Injection Molding.

Published in:

Macromolecular Chemistry & Physics, 2025, v. 226, n. 1, p. 1, doi. 10.1002/macp.202400320

By:

Ehjeij, Daniel;
Kopping, Jordan;
Gabriel, Claus;
Wünsch, Josef R.;
Himmel, Hans‐Jörg;
Schröder, Rasmus R.;
Wilhelm, Manfred;
Freudenberg, Jan;
Bunz, Uwe H. F.;
Müllen, Klaus

Publication type:

Article

Effect of Thermal Processing on the Dynamic/Isothermal Crystallization and Cytocompatibility of Polylactic Acid for Biomedical Applications.

Published in:

Macromolecular Chemistry & Physics, 2021, v. 222, n. 23, p. 1, doi. 10.1002/macp.202100274

By:

Cifuentes, Sandra C.;
Saldaña, Laura;
Gónzalez‐Carrasco, José Luis;
Benavente, Rosario;
García‐Peñas, Alberto

Publication type:

Article

The Complex Crystalline Structure of Polyethylene/Polycarbonate Microfibril Blends in a Secondary Flow Field.

Published in:

Macromolecular Chemistry & Physics, 2014, v. 215, n. 11, p. 1146, doi. 10.1002/macp.201400021

By:

Xia, Xiao‐Chao;
Zhang, Quan‐Ping;
Wang, Long;
Feng, Jian‐Min;
Yang, Ming‐Bo

Publication type:

Article

Contrast Agent Incorporation into Silicone Enables Real-Time Flow-Structure Analysis of Mammalian Vein-Inspired Soft Pumps.

Published in:

Advanced Functional Materials, 2015, v. 25, n. 14, p. 2129, doi. 10.1002/adfm.201404461

By:

Loepfe, Michael;
Schumacher, Christoph M.;
Burri, Cornelia H.;
Stark, Wendelin J.

Publication type:

Article

Interpretation of Cole–Cole dielectric dispersion of green composites from medical LINAC modified luffa fiber/PLA.

Published in:

Journal of Materials Science: Materials in Electronics, 2022, v. 33, n. 9, p. 6911, doi. 10.1007/s10854-022-07871-0

By:

Dalai, Sonismita;
Parida, Chhatrapati

Publication type:

Article

Optimization of physical and mechanical properties of PC/ABS/PMMA blends by mixture design approach.

Published in:

Polymer International, 2024, v. 73, n. 12, p. 1030, doi. 10.1002/pi.6681

By:

Ezzeddine, Rahma;
Elfehri, Karama;
Marcos‐Fernández, Ángel;
Samet, Basma

Publication type:

Article

On the injection molding of thick‐walled thermoplastic vulcanizates: linking static and dynamic mechanical properties with morphology.

Published in:

Polymer International, 2023, v. 72, n. 5, p. 508, doi. 10.1002/pi.6497

By:

Burgoa, Aizeti;
Arriaga, Aitor;
Badiola, Jon Haitz;
Ibarretxe, Julen;
Iturrondobeitia, Maider;
Martinez‐Amesti, Ana;
Vilas, Jose Luis

Publication type:

Article

Erratum: Polyurethane‐layered double hydroxide nanocomposite foam: in situ synthesis by reaction injection molding and characterization.

Published in:: 2023
Publication type:: Correction Notice

Polyurethane‐layered double hydroxide nanocomposite foam: in situ synthesis by reaction injection molding and characterization.

Published in:

Polymer International, 2022, v. 71, n. 9, p. 1072, doi. 10.1002/pi.6365

By:

Mukherjee, Moumita;
Mandal, Sujata;
Gnanasundaram, Saraswathy;
Das, Bhabendra Nath

Publication type:

Article

Recycling extrusion of poly(ether‐block‐amide) thermoplastic elastomer (Pebax®): the influence of chemical and crystal change on mechanical properties.

Published in:

Polymer International, 2021, v. 70, n. 11, p. 1621, doi. 10.1002/pi.6258

By:

Gui, Yuan;
Li, Yucai;
Wu, Xin;
Feng, Xinxing;
Huang, Guotao;
Deng, Jianping;
Wang, Cao;
Pan, Kai

Publication type:

Article

A review of electrically conductive poly(ether ether ketone) materials.

Published in:

Polymer International, 2021, v. 70, n. 8, p. 1016, doi. 10.1002/pi.6176

By:

Mokhtari, Mozaffar;
Archer, Edward;
Bloomfield, Noel;
Harkin‐Jones, Eileen;
McIlhagger, Alistair

Publication type:

Article

On the use of acrylated epoxidized soybean oil as a reactive compatibilizer in injection‐molded compostable pieces consisting of polylactide filled with orange peel flour.

Published in:

Polymer International, 2018, v. 67, n. 10, p. 1341, doi. 10.1002/pi.5588

By:

Quiles‐Carrillo, Luis;
Montanes, Nestor;
Lagaron, Jose Maria;
Balart, Rafael;
Torres‐Giner, Sergio

Publication type:

Article

Multi-objective optimization and evaluation of shrinkage and weld line strength in flat plastic parts using response surface methodology in injection molding.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 2, p. 757, doi. 10.1007/s00170-025-15539-2

By:

Azawqari, Adel Ali;
Rahim, Shayfull Zamree Abd;
Fathullah, Mohd;
Saad, Mohd Nasir Mat;
Huzaim, Nurul Hidayah

Publication type:

Article

Quality analysis of cycloidal gears made of polyoxymethylene by injection moulding.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 11, p. 5649, doi. 10.1007/s00170-025-15481-3

By:

Biernacki, Krzysztof

Publication type:

Article

Effect of geometric design of injection screws on the plasticization of recycled acrylonitrile butadiene styrene resins.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 3, p. 1705, doi. 10.1007/s00170-025-15280-w

By:

Wu, Yu-Jhih;
Huang, Ming-Shyan

Publication type:

Article

Analysis and optimization of injection molding process on warpage based on Taguchi design and PSO algorithm.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 1, p. 981, doi. 10.1007/s00170-025-15099-5

By:

Zhang, Lei;
Chang, Tien-Li;
Tsao, Chung-Chen;
Hsieh, Kun-Chi;
Hsu, Chun-Yao

Publication type:

Article

Data-driven analysis of bonding strength in laser-structured metal-GFRP hybrid joints via groove morphology.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1095, doi. 10.1007/s00170-024-14881-1

By:

Choi, Jun Young;
Kim, Geun Young;
Kim, Do Hoi;
Yoon, Narae;
Han, Amy Kyungwon;
Ahn, Sung-Hoon

Publication type:

Article

Coefficient of friction in the demoulding forces of the injection moulding process—a review.

Published in:

2025

By:

Rodrigues, Ângela R.;
Correia, Mário S.;
Pontes, António J.

Publication type:

Literature Review

Direct injection molding of polypropylene composites reinforced with recycled carbon fibers.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 11, p. 5353, doi. 10.1007/s00170-024-14828-6

By:

Guo, Gangjian;
Chen, Joseph C.;
Finkenstadt, Victoria L.;
Velayudham, Lingeswar;
Rizvi, Reza

Publication type:

Article

Parameter analysis of multi-objective optimization for energy efficiency and multiple quality aspects in injection molding.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 9/10, p. 4471, doi. 10.1007/s00170-024-14752-9

By:

Yeh, Chun-Liang;
Wu, Cheng-Hsien

Publication type:

Article

Additive manufacturing and mechanical performance of short fiber reinforced PEEK (polyether ether ketone) thermoplastic composites in a vacuum environment.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 3/4, p. 1677, doi. 10.1007/s00170-024-14209-z

By:

Vatandaş, Bahri Barış;
Gümrük, Recep

Publication type:

Article

Additive manufacturing of variothermal injection moulding insert made of Al-40Si.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 3/4, p. 2067, doi. 10.1007/s00170-024-14151-0

By:

Frasch, Johannes;
Schwinger, Christian;
Traxdorf, Rico;
Graf, Stefan;
Kinast, Jan

Publication type:

Article