Works about HOT pressing

Results: 1382

Properties of Phenol-Formaldehyde Resin Modified with Kraft Lignin for Particleboard Production.

Published in:

Wood Industry / Drvna Industrija, 2025, v. 76, n. 2, p. 149, doi. 10.5552/drvind.2025.0232

By:

Němec, Miroslav;
Prokůpek, Luboš;
Hradecký, Jaromír;
Obst, Vojtěch;
Pipíška, Tomáš;
Hýsek, Štěpán

Publication type:

Article

New Characteristics and Bonding Mechanisms of the Directly Bonded W/Cu Plates.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4493, doi. 10.1007/s11837-025-07290-6

By:

Zhang, Pengfei;
He, Huanju;
Zhang, Zhansheng;
Wang, Biao;
Li, Zhengao;
Lin, Tiesong;
Yang, Zhihua

Publication type:

Article

In Situ Neutron Diffraction Study of Strain Evolution and Load Partitioning During Elevated Temperature Tensile Test in HIP-Treated Electron Beam Powder Bed Fusion Manufactured Ti-6Al-4V: In Situ Neutron Diffraction Study of Strain Evolution and Load Partitioning During Elevated Temperature Tensile Test in HIP-Treated Electron Beam Powder Bed Fusion Manufactured Ti-6Al-4V: Pandian, Neikter, Ekh, Harjo, Kawasaki, Woracek, Hansson, and Pederson

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 4, p. 1803, doi. 10.1007/s11837-025-07128-1

By:

Pandian, K.;
Neikter, M.;
Ekh, M.;
Harjo, S.;
Kawasaki, T.;
Woracek, R.;
Hansson, T.;
Pederson, R.

Publication type:

Article

Diffusion Interface Evolution of Low-Alloy Steel Q235 and Ti by Electro-Assisted Hot-Pressing Bond: Diffusion Interface Evolution of Low-Alloy Steel Q235 and Ti by Electro-Assisted Hot-Pressing Bond: Song, Kang, Liao, Zhang, and Chou.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 4, p. 1756, doi. 10.1007/s11837-024-06913-8

By:

Song, Cheng-Min;
Kang, Lei;
Liao, Xiang-Wei;
Zhang, Guo-Hua;
Chou, Kuo-Chih

Publication type:

Article

JOM Technical Topics.

Published in:: JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 11, p. 6112, doi. 10.1007/s11837-024-06917-4
Publication type:: Article

Microstructure and Tensile Properties of Hot Isostatically Pressed Nickel-base Superalloy CM247LC.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 10, p. 5839, doi. 10.1007/s11837-024-06796-9

By:

Behera, S.;
Shivran, V. P;
Chatterjee, Dibyendu;
Palit, Mithun

Publication type:

Article

Effect of Aging Treatment on the Mechanical Properties of 45 vol.% SiCp/6061Al Composite.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 9, p. 5170, doi. 10.1007/s11837-024-06581-8

By:

Cao, Leigang;
Zhu, Mingyu;
Yang, Yue;
Meng, Yi;
Liu, Yuan;
Cui, Yan

Publication type:

Article

Oxidation Performance of CoCrCuFeMnNix High-Entropy Alloys Prepared via Vacuum Hot Pressing Sintering.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 8, p. 4085, doi. 10.1007/s11837-024-06419-3

By:

Zhang, Baofeng;
Zhao, Ruifeng;
Ren, Bo;
Jiang, Aiyun;
Chen, Chong;
Liu, Jianxiu;
Liu, Zhongxia

Publication type:

Article

Microstructures and Properties of AlCoCrNiFe High-Entropy Alloy Sintered by Hot Oscillating Pressing Under Different Sintering Times.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 5, p. 2554, doi. 10.1007/s11837-024-06459-9

By:

Gao, Ka;
Wu, Ziqian;
Ren, Chunyang;
Xiong, Yan;
Sun, Dejian;
Gao, Yang;
An, Linan

Publication type:

Article

Evaluation of High-Vacuum Annealing and Hot Isostatic Pressing on the Microstructure and Properties of an Additively Manufactured Niobium Alloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 3, p. 1223, doi. 10.1007/s11837-023-06320-5

By:

Fietek, Carter;
Brizes, Eric;
Milner, Justin

Publication type:

Article

Relationship Between Powder Size, Prior Particle Boundaries and Properties of FGH4096M Nickel-Based Superalloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 3, p. 1639, doi. 10.1007/s11837-023-06197-4

By:

Ren, Xiaona;
Yang, Lebiao;
Xie, Yin;
Cai, Chao;
Shi, Yusheng;
Ge, Changchun

Publication type:

Article

The Effect of Heat Treatment on Local Mechanical Properties of Laser Powder Bed Fused and Hot Isostatically Pressed Al-Cu-Mg-Ag-TiB2 (A20X) Aluminum Alloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 1, p. 31, doi. 10.1007/s11837-023-06233-3

By:

Shakil, Shawkat I.;
Beamer, Chad;
Attallah, Moataz M.;
Haghshenas, Meysam

Publication type:

Article

Study on Effect of Milling Time on the Mechanical and Wear Properties of the ZA40-B4C-Graphene Hybrid Nanocomposites Fabricated by Vacuum Hot-Pressing.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 9, p. 3935, doi. 10.1007/s11837-023-06007-x

By:

Çelebi, Müslim;
Çanakçi, Aykut;
Güler, Onur;
Akgül, Bekir;
Karabacak, Abdullah Hasan

Publication type:

Article

Advances in Sintering of Titanium Aluminide: A Review.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 8, p. 2877, doi. 10.1007/s11837-022-05664-8

By:

Mphahlele, M. R.;
Olubambi, P. A.;
Olevsky, E. A.

Publication type:

Article

Correlation Between Cooling Rate and γ' Precipitate Size in Rene 95 Alloy Fabricated Through a Powder Metallurgy Process.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 7, p. 2489, doi. 10.1007/s11837-023-05822-6

By:

Kim, Dae Ha;
Park, Jae-Young;
Hong, Soon Jik;
Im, Hyeon-Tae;
Ko, Won-Seok;
Park, Ki Beom;
Kwon, Hong Gi;
Mo, Chan Bin;
Park, Hyung-Ki

Publication type:

Article

Effect of Post-processing on Corrosion Behavior of LPBF Built Inconel 718 Alloy.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 1, p. 32, doi. 10.1007/s11837-022-05565-w

By:

Murmey, Prasad;
Nichul, Unissa;
Chikode, Mahesh;
Hiwarkar, Vijay

Publication type:

Article

Investigation of Microstructure, Hardness and Wear Properties of Hybrid Nanocomposites with Al2024 Matrix and Low Contents of B4C and h-BN Nanoparticles Produced by Mechanical Milling Assisted Hot Pressing.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 11, p. 4449, doi. 10.1007/s11837-022-05441-7

By:

Çelebi, Müslim;
Çanakçı, Aykut;
Güler, Onur;
Özkaya, Serdar;
Karabacak, Abdullah Hasan;
Arpacı, Kürşat Alp

Publication type:

Article

Powder Metallurgy HIP Process Study and Mechanical Property Evaluations for IN740H.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 9, p. 3289, doi. 10.1007/s11837-022-05385-y

By:

Huang, Shenyan;
Hanlon, Timothy;
Shingledecker, John;
Spinelli, Ian;
Drobnjak, Marija;
Shoemaker, Kevin;
Crawford, Cole

Publication type:

Article

Influence of Oxygen Content on the Microstructure and Mechanical Properties of Hot Isostatically Pressed 30CrMnSiNi2A Ultra-High Strength Steel.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 9, p. 3595, doi. 10.1007/s11837-022-05336-7

By:

Li, Jie;
Ma, Yunzhu;
Cai, Qingshan;
Liu, Wensheng;
Duan, Youteng;
Liang, Chaoping

Publication type:

Article

Interface Microstructure and Tribological Behaviors of Copper Matrix Composites with High Graphite Content Prepared by Short-Process Reduction and Vacuum Hot Pressing.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 5, p. 2094, doi. 10.1007/s11837-022-05187-2

By:

Zhou, Tao;
Dai, Jie;
Xiao, Zhu;
Qiu, Wen-Ting;
Lei, Qian;
Liu, Xinwei;
Qin, Liuxin;
Ma, Muzhi

Publication type:

Article

Oxidation Resistance in 1200°C Steam of a FeCrAl Alloy Fabricated by Three Metallurgical Processes.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 4, p. 1690, doi. 10.1007/s11837-022-05209-z

By:

Hoffman, Andrew K.;
Umretiya, Rajnikant V.;
Gupta, Vipul K.;
Larsen, Michael;
Graff, Corey;
Perlee, Christopher;
Brennan, Patrick;
Rebak, Raul

Publication type:

Article

Processing and Characterization of a Mechanically Alloyed and Hot Press Sintered High Entropy Alloy from the Al-Cr-Fe-Mn-Mo Family.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2022, v. 74, n. 3, p. 971, doi. 10.1007/s11837-021-05109-8

By:

Stasiak, Tomasz;
Sow, Mourtada Aly;
Addad, Ahmed;
Touzin, Matthieu;
Béclin, Franck;
Cordier, Catherine

Publication type:

Article

The Effect of PostProcessing on the Ductility and Strength of Ti-6Al-4V Lattice Materials.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 12, p. 4119, doi. 10.1007/s11837-021-04962-x

By:

Zhang, X. Z.;
Wang, J.;
Jia, L.;
Tang, H. P.;
Qian, M.

Publication type:

Article

Fabrication of a Cu/TiNi Composite with High Air-Tightness and Low Thermal Expansion.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2020, v. 72, n. 2, p. 883, doi. 10.1007/s11837-019-03930-w

By:

Xiao, Tao;
Li, Zhou;
Xiao, Zhu;
Zhang, Xi;
Qiu, Wenting;
Wang, Yang;
Guo, Xiaoli;
Lei, Qian

Publication type:

Article

Effect of Powder Size on Fatigue Properties of Ti-6Al-4V Powder Compact Using Hot Isostatic Pressing.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 10, p. 3614, doi. 10.1007/s11837-019-03612-7

By:

Guo, Ruipeng;
Yu, Bingbing;
Shi, Xiaohui;
Xu, Lei;
Yang, Rui

Publication type:

Article

Influence of Carbon Content on Aluminothermic Reduction of Ilmenite During Hot Pressing.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 5, p. 1822, doi. 10.1007/s11837-019-03428-5

By:

Liu, Shengming;
Chen, Min;
Xiao, Xuan

Publication type:

Article

Optimization of Multi-phase Mo-12Si-8.5B Alloy by SiC Whisker.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 11, p. 2529, doi. 10.1007/s11837-018-3059-x

By:

Li, Bin;
Lin, Xiaohui;
Li, Laiping;
Zhang, Pingxiang;
Zhang, Guojun

Publication type:

Article

Alloying Behavior and Properties of Al-Based Composites Reinforced with AlFe Metallic Glass Particles Fabricated by Mechanical Alloying and Hot Pressing Consolidation.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2017, v. 69, n. 4, p. 748, doi. 10.1007/s11837-016-2239-9

By:

Zhang, Lanxiang;
Yang, LiKun;
Leng, Jinfeng;
Wang, Tongyang;
Wang, Yan

Publication type:

Article

Effect of Li Halides on the Mechanical Properties and Thermoplasticity of Poly(vinyl alcohol) Molded by Hot Pressing.

Published in:

Macromolecular Chemistry & Physics, 2025, v. 226, n. 8, p. 1, doi. 10.1002/macp.202400382

By:

Taoka, Yusuke;
Suzuki, Koyuru;
Yamaguchi, Masayuki;
Matsumura, Kazuaki

Publication type:

Article

Sustainable Polyurethane Networks with High Self‐Healing and Mechanical Properties Based on Dual Dynamic Covalent Bonds.

Published in:

Macromolecular Chemistry & Physics, 2023, v. 224, n. 2, p. 1, doi. 10.1002/macp.202200322

By:

Zeng, Yanning;
Li, Jiawei;
Hu, Chaoying;
Yang, Bin;
Ning, Zhao

Publication type:

Article

Theoretical and numerical investigations of manufacturing bimetal CRA-lined pipes using thermo-hydraulic forming.

Published in:

Journal of Thermal Analysis & Calorimetry, 2021, v. 145, n. 2, p. 569, doi. 10.1007/s10973-020-09699-4

By:

Fan, Xianyong;
Wang, Xuesheng;
Chen, Qingzhu

Publication type:

Article

Investigation of YAP/YAG powder sintering behavior using advanced thermal techniques: Sintering to transparency.

Published in:

Journal of Thermal Analysis & Calorimetry, 2019, v. 138, n. 3, p. 1987, doi. 10.1007/s10973-019-08598-7

By:

Gizowska, Magdalena;
Perkowski, Krzysztof;
Piątek, Milena;
Konopka, Gustaw;
Witosławska, Irena;
Tymowicz-Grzyb, Paulina

Publication type:

Article

Influence of drying process conditions on graphite anode properties and crystalline type of polyvinylidene fluoride binder.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8039, doi. 10.1007/s10853-025-10927-1

By:

Niu, Lijing;
Zhao, Jiajia;
Xie, Mengmeng;
Jiang, Xunyong

Publication type:

Article

Fabrication of large-sized dense bulk biocarbon with excellent mechanical properties by hot-press sintering.

Published in:

Journal of Materials Science, 2025, v. 60, n. 19, p. 8093, doi. 10.1007/s10853-025-10648-5

By:

Gu, Yanju;
Xie, You;
Xu, Xinru;
Hu, Weiqin;
He, Wei;
Tian, Yexin;
Tan, Ruixuan;
Fan, Zheqiong;
Liu, Bo;
Han, Fei

Publication type:

Article

Effect of hot isostatic pressing on the low-cycle fatigue behavior of laser powder bed fusion manufactured 21-6-9 austenitic stainless steel.

Published in:

Journal of Materials Science, 2025, v. 60, n. 7, p. 3472, doi. 10.1007/s10853-025-10654-7

By:

Ujiie, Ryosuke;
Neikter, Magnus;
Pederson, Robert;
Hansson, Thomas;
Miyashita, Yukio

Publication type:

Article

Effect of ZrMgMo3O12 content on the thermal expansion and dimensional stability of ZrMgMo3O12p/2024Al composites.

Published in:

Journal of Materials Science, 2024, v. 59, n. 35, p. 16520, doi. 10.1007/s10853-024-10124-6

By:

Yang, Junrui;
Yin, Chaofan;
Chen, Jianjun;
Xu, Yangcheng;
Han, Mingyu;
Zhang, Guopeng;
Liu, Zhongxia

Publication type:

Article

Bio-based epoxy vitrimer: fast self-repair under acid-thermal stimulation.

Published in:

Journal of Materials Science, 2024, v. 59, n. 26, p. 12111, doi. 10.1007/s10853-024-09904-x

By:

Zhao, Yanna;
Bai, Xiaowei;
Zhang, Yingying;
Wang, Yuqi;
Huang, Yuqing;
Hou, Wentong

Publication type:

Article

Microstructural evaluation of the addition of Zr to create novel refractory high entropy alloys.

Published in:

Journal of Materials Science, 2023, v. 58, n. 45, p. 17405, doi. 10.1007/s10853-023-09115-w

By:

Mohammadi, Aron;
Tsang, Jonathan;
Huang, Xiao;
Kearsey, Richard

Publication type:

Article

Anisotropy in the compression strength of hot-pressed ceramics.

Published in:

Journal of Materials Science, 2023, v. 58, n. 40, p. 15603, doi. 10.1007/s10853-023-09011-3

By:

Swab, Jeffrey J.;
Pittari III, John J.;
Meredith, Christopher S.

Publication type:

Article

Transformation of oxide nanoparticles in a nickel-based ODS alloy aged at 1000 °C.

Published in:

Journal of Materials Science, 2023, v. 58, n. 39, p. 15381, doi. 10.1007/s10853-023-08975-6

By:

Mao, Zhe;
Li, Jing;
Liu, Shi;
Xiong, Liangyin

Publication type:

Article

Pore tracing in additive manufactured and hot isostatic pressed components.

Published in:

Journal of Materials Science, 2023, v. 58, n. 35, p. 14245, doi. 10.1007/s10853-023-08907-4

By:

Nudelis, Natan;
Mayr, Peter

Publication type:

Article

New insights for strengthening and toughening mechanisms of dislocation in B4C–ZrB2–SiC composites using vacuum hot pressing assisted by reaction sintering (VHP-RS).

Published in:

Journal of Materials Science, 2023, v. 58, n. 14, p. 6361, doi. 10.1007/s10853-023-08417-3

By:

Li, Shuai;
Wang, Hailiang;
Wang, Hailong;
Ouyang, Kangjing;
Qiu, Hongchen;
Song, Bo;
Chen, Yongqiang;
Han, Daoyang;
Shao, Gang;
Fan, Bingbing;
Lu, Hongxia;
Xu, Hongliang;
Zhang, Rui

Publication type:

Article

Development and production of a CNC machined 420 stainless steel reinforced with Cu by hot pressing.

Published in:

Journal of Materials Science, 2023, v. 58, n. 11, p. 5048, doi. 10.1007/s10853-023-08332-7

By:

Cunha, A.;
Pinto, J.;
Cerqueira, M. F.;
Silva, F. S.;
Trindade, B.;
Carvalho, O.

Publication type:

Article

Effect of carbon content on the microstructure and properties of Cr-doped WC–15Co cemented carbide.

Published in:

Journal of Materials Science, 2022, v. 57, n. 41, p. 19327, doi. 10.1007/s10853-022-07826-0

By:

Zhang, Ren;
Yan, Wenmin;
Jin, Peng;
Wei, Xiuyu;
Jiang, Ganshu;
Long, Jianzhan;
Wang, Wei;
Zhang, Weibing

Publication type:

Article

Investigation of anisotropy in microstructure and thermoelectric properties of large-scaled p-type Bi–Sb–Te sintered body made by hot pressing.

Published in:

Journal of Materials Science, 2022, v. 57, n. 38, p. 18168, doi. 10.1007/s10853-022-07698-4

By:

Madavali, Babu;
Nguyen, Van Dao;
Jo, Sung Jae;
Lee, Chul-hee;
Hong, Soon-Jik

Publication type:

Article

Fabrication and characterization of PZT/PVDF composite films for force sensor applications.

Published in:

Polymer International, 2024, v. 73, n. 9, p. 727, doi. 10.1002/pi.6643

By:

Suprapto;
Ting, Yung;
Gunawan, Hariyanto;
Yazid, Edwar;
Nugraha, Aditya Sukma;
Azhari, Budi;
Ramadiansyah, M Luthfi;
Hikmawan, M Fathul;
Jubaidah

Publication type:

Article

Extrusion/hot pressing processing and laminated layers of continuous carbon fiber/thermoplastic polyurethane knitted composites.

Published in:

Polymer International, 2022, v. 71, n. 3, p. 283, doi. 10.1002/pi.6325

By:

Lin, Mei‐Chen;
Lin, Jia‐Horng;
Bao, Limin

Publication type:

Article

The contribution of bisfurfurylamine to the development and properties of polyureas.

Published in:

Polymer International, 2020, v. 69, n. 8, p. 688, doi. 10.1002/pi.6003

By:

Trovatti, Eliane;
Gonçalves, Isabela G;
Carvalho, Antonio JF;
Gandini, Alessandro

Publication type:

Article

Sulfide stress corrosion (SSC) susceptibilities of duplex stainless steels 2205 produced by powder metallurgy (HIP) and hot rolling.

Published in:

Materials & Corrosion / Werkstoffe und Korrosion, 2024, v. 75, n. 11, p. 1528, doi. 10.1002/maco.202414418

By:

Barros, T. S.;
Tavares, S. S. M.;
Pimenta, A. R.;
Batista, R. T.;
Velasco, J. A. C.

Publication type:

Article

Oxidation behavior of lightweight Al2NbTi3V2Zr high entropy alloy at 1000°C.

Published in:

Materials & Corrosion / Werkstoffe und Korrosion, 2024, v. 75, n. 6, p. 805, doi. 10.1002/maco.202314185

By:

Tan, Xinrong;
Zhi, Qian;
Pei, Rong;
Chen, Yuhua;
Xiong, Wenwen;
Xie, Wen;
Chen, Yuqiang;
Liu, Yang

Publication type:

Article