Works matching DE "HEAT exchangers"

Results: 5000

Optimization of geometrical and operational parameters for fluid flow and heat transfer in microchannel heat sinks using the Taguchi method.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 8, p. 6163, doi. 10.1007/s10973-025-14185-w

By:

Hassani, S. M.;
Mohammadbeigi, O.;
Mazloumi, S. H.

Publication type:

Article

Experimental investigation of the effects of simultaneously using plate fins and a helical screw rod with a core rod on a double-tube heat exchanger's thermal performance.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 8, p. 6287, doi. 10.1007/s10973-025-14061-7

By:

Hagig, Khaled Ali;
Özkaymak, Mehmet;
Kılıç, Faruk;
Göktaş, Mustafa;
Aktaş, Mustafa

Publication type:

Article

A Comprehensive Review on Studies of Flow Characteristics in Horizontal Tube Falling Film Heat Exchangers.

Published in:

Energies (19961073), 2025, v. 18, n. 13, p. 3587, doi. 10.3390/en18133587

By:

Wang, Zhenchuan;
Li, Meijun

Publication type:

Article

Validation of PCHE-Type CO 2 –CO 2 Recuperative Heat Exchanger Modeling Using Conductance Ratio Method.

Published in:

Energies (19961073), 2025, v. 18, n. 13, p. 3547, doi. 10.3390/en18133547

By:

Illyés, Viktoria Carmen;
Crespi, Francesco;
Guerif, Xavier;
Werner, Andreas

Publication type:

Article

Cross-Scale Simulation Study of Porous Medium Heat Exchangers Based on Reliable Cell Selection.

Published in:

Energies (19961073), 2025, v. 18, n. 13, p. 3510, doi. 10.3390/en18133510

By:

Liang, Yiqiang;
Zhang, Jun;
Liu, Yu;
Sun, Mingrui;
Song, Yongchen

Publication type:

Article

Thermo-Hydrodynamic Features of Grooved Heat Sink with Droplet-Shaped Fins Based on Taguchi Optimization and Field Synergy Analysis.

Published in:

Energies (19961073), 2025, v. 18, n. 13, p. 3396, doi. 10.3390/en18133396

By:

Zhong, Lin;
Shi, Jingli;
Li, Yifan;
Wang, Zhipeng

Publication type:

Article

Advancements in Heat Transfer and Fluid Mechanics (Fundamentals and Applications).

Published in:

2025

By:

Elatar, Ahmed

Publication type:

Editorial

Heat Transfer Enhancement in Flue-Gas Systems with Radiation-Intensifying Inserts: An Analytical Approach.

Published in:

Energies (19961073), 2025, v. 18, n. 13, p. 3383, doi. 10.3390/en18133383

By:

Menkeliūnienė, Justina;
Jonynas, Rolandas;
Paukštaitis, Linas;
Balčius, Algimantas;
Buinevičius, Kęstutis

Publication type:

Article

Conjugate Heat Transfer Modelling in a Centrifugal Compressor for Automotive Applications.

Published in:

Energies (19961073), 2025, v. 18, n. 13, p. 3348, doi. 10.3390/en18133348

By:

Cravero, Carlo;
Hoffer, Pierre-Alain;
Marsano, Davide;
Mattiello, Daniele;
Mosciaro, Luigi

Publication type:

Article

Designing a Waste Heat Recovery Heat Exchanger for Polymer Electrolyte Membrane Fuel Cell Operation in Medium-Altitude Unmanned Aerial Vehicles.

Published in:

Energies (19961073), 2025, v. 18, n. 13, p. 3262, doi. 10.3390/en18133262

By:

Jang, Juwon;
Choi, Jaehyung;
Choi, Seung-Jun;
Kim, Seung-Gon

Publication type:

Article

Assessment of the Feasibility of Using Additive Manufacturing from Metal Powder to Produce Compact Heat Exchangers.

Published in:

Materials (1996-1944), 2025, v. 18, n. 13, p. 3035, doi. 10.3390/ma18133035

By:

Chliszcz, Katarzyna;
Laskowska, Dorota;
Kuczyński, Waldemar;
Bałasz, Błażej;
Kasperowaicz, Maciej;
Moj, Kevin

Publication type:

Article

Numerical Simulation of Phase Transition Process for Vertical Lift Underwater Monitoring Device Driven by Ocean Thermal Energy.

Published in:

Applied Sciences (2076-3417), 2025, v. 15, n. 13, p. 7616, doi. 10.3390/app15137616

By:

Liang, Zede;
Zhang, Tielin;
Li, Qingqing

Publication type:

Article

Mathematical modeling and performance analysis of heat recovery steam generator at Shat-Al Basra power plant.

Published in:

Journal of Energy Systems, 2025, v. 9, n. 2, p. 194, doi. 10.30521/jes.1652961

By:

Hanoon, Mujtaba;
Fares, Mohammad N.;
Taher, Mohammad A.

Publication type:

Article

Impact of soil freezing on the thermal performance of geothermal borehole heat exchangers across Canadian climates.

Published in:

Building Services Engineering Research & Technology, 2025, v. 46, n. 4, p. 441, doi. 10.1177/01436244251339720

By:

Keramat, Fatemeh;
Zhong, Lexuan

Publication type:

Article

Numerical Investigation of Heat and Mass Transfer Enhancement in Ternary Nano-Casson Fluid in the Presence of Cattaneo−Christov Theory with Hall and Ion Slip Effects.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 13, p. 10245, doi. 10.1007/s13369-025-10058-4

By:

Abid, Muhammad;
Akhtar, Tayyaba;
Bibi, Madiha

Publication type:

Article

Improving the Convective Heat Transfer Coefficient of a New Design Helical Coiled Tube Heat Exchanger via Air Injection Technique.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 13, p. 10127, doi. 10.1007/s13369-025-10038-8

By:

Mahood, Hameed B.;
Baqir, Ali Sh.;
Kareem, Ahmed R.;
Khadom, Anees A.;
Rashid, Khalid H.;
Campbell, Alasdair N.

Publication type:

Article

Experimental Evaluation of a Direct Contact Membrane Distillation System Efficiency Under Single- and Double-Stage Cooling Modes.

Published in:

Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2025, v. 50, n. 13, p. 10065, doi. 10.1007/s13369-024-09886-7

By:

Najib, Abdullah;
Ali, Emad;
Al-Ansary, Hany;
Almehmadi, Fahad Awjah

Publication type:

Article

Experimental Measurements of Fanning Friction Factors in Various Types of Additively Manufactured Compact Heat Exchangers.

Published in:

Heat Transfer, 2025, v. 54, n. 4, p. 2728, doi. 10.1002/htj.23319

By:

Ranganayakulu, Chennu;
Fuchs, Marcos;
Kabelac, Stephan

Publication type:

Article

Enhancement of Heat Transfer in Double‐Pipe Heat Exchangers Using Wavy Edge Twisted Tape With Varying Twist Ratios and Perforated Diameters.

Published in:

Heat Transfer, 2025, v. 54, n. 4, p. 2609, doi. 10.1002/htj.23311

By:

Saleh, Zainab Mahdi;
Al‐Turaihi, Riyadh S.;
Kadhim, Zena Khalefa

Publication type:

Article

Combined Flow and Temperature Nonuniformity in Compact Cross‐Flow Three‐Fluid Heat Exchangers.

Published in:

Heat Transfer, 2025, v. 54, n. 4, p. 2420, doi. 10.1002/htj.23299

By:

Aasi, Harpreet K.;
Mishra, Manish

Publication type:

Article

IIoT Implementation to Investigate the Heat Transfer Efficiency of a Concentric Corrugated Pipe Heat Exchanger.

Published in:

Heat Transfer, 2025, v. 54, n. 4, p. 2411, doi. 10.1002/htj.23298

By:

Wiriyasart, Songkran;
Kaewluan, Sommas

Publication type:

Article

Assessment Improvement of Heat Performance and Hydraulic Thermal Flow in a Three‐Dimensional Tube Equipped With Different Turbulator Corrugated Arrangements.

Published in:

Heat Transfer, 2025, v. 54, n. 4, p. 2594, doi. 10.1002/htj.23296

By:

Al‐Haidari, Saad Raad;
Al‐Obaidi, Ahmed Ramadhan

Publication type:

Article

Simulation and Optimization of Finned and Twisted Double‐Tube Heat Exchanger Using Neural Network Algorithm.

Published in:

Heat Transfer, 2025, v. 54, n. 4, p. 2471, doi. 10.1002/htj.23272

By:

Chegini, Javid Nezamivand;
Javaherdeh, Kourosh;
Seddigh, Alireza Asadi

Publication type:

Article

The Experimental Determination of the Heat Transfer Coefficient in Thin Channels of a Regenerative Heat Exchanger.

Published in:

FME Transactions, 2025, v. 53, n. 1, p. 173, doi. 10.5937/fme2501173V

By:

Vakulenko, Daria;
Mileikovskyi, Viktor

Publication type:

Article

Heat transfer enhancement in a parabolic trough collector using finned tubular absorber.

Published in:

Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-07825-6

By:

Donga, Ramesh K.;
Kumar, Suresh;
Velidi, Gurunadh

Publication type:

Article

Experimental study on heat transfer and resistance of round tube with tube sheet under ultrasonic action.

Published in:

Canadian Journal of Chemical Engineering, 2025, v. 103, n. 6, p. 2672, doi. 10.1002/cjce.25536

By:

Lv, Xiaohan;
Yu, Chulin;
Wang, Wenqing;
Yang, Yuxi;
Zhang, Haiqing

Publication type:

Article

Nanofluid jet impingement cooling on a finned heat exchanger with staggered spacing for enhanced convective heat transfer.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 7, p. 5565, doi. 10.1007/s10973-025-14114-x

By:

Anilkumar, S. H.

Publication type:

Article

Machine learning approach to predict the thermal performance and friction factor of cylindrical heat exchangers with perforated conical ring turbulators.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 7, p. 5841, doi. 10.1007/s10973-025-14092-0

By:

Gomathi, B.;
Ramanipriya, M.;
Anitha, S.

Publication type:

Article

Experimental and numerical analysis of simultaneous heating and cooling of phase change material for continuous application.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 7, p. 5541, doi. 10.1007/s10973-025-14087-x

By:

Rajak, Shyam Kumar;
Raj, Akash;
Saksena, Vinamr;
Jha, Rishabh Kumar;
Kumari, Pallavi;
Ghosh, Debasree

Publication type:

Article

Performance of a heat exchanger for three fluids with graphene–water-based nanofluid used in a sustainable residential heating system: an optimization and techno-economic assessment.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 7, p. 5629, doi. 10.1007/s10973-025-14075-1

By:

Bargah, Vikas;
Mishra, Sudhansu S.;
Almasri, Belal;
Mohapatra, Taraprasad

Publication type:

Article

Comparative performance analysis of dual spiral and parallel riser tubes in solar flat plate water heater with and without reflector: an experimental study.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 7, p. 5319, doi. 10.1007/s10973-025-14081-3

By:

Kumar, Yogesh;
Shekhar, Shiena;
Verma, Manoj;
Ghritlahre, Harish Kumar

Publication type:

Article

Heat transfer performance and fouling analysis of clove-treated graphene nanoplatelet nanofluid in a double-pipe heat exchanger.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 7, p. 5663, doi. 10.1007/s10973-025-14002-4

By:

Wang, Yanru;
Nair, Sayshar Ram;
Ho, Michael Luke Gwanjie;
Foo, Ji-Jinn;
Tran, Manh-Vu;
Oon, Cheen Sean

Publication type:

Article

Enhancement of the heat transfer performance of a double-pipe heat exchangers in various configurations using Al₂O₃ nanofluid: A focused review.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 6, p. 3941, doi. 10.1007/s10973-025-14042-w

By:

Kadhim, Saif Ali;
Abdul-Ghafoor, Qusay J.;
Hammoodi, Karrar A.;
Abdul Wahhab, Hasanain A.;
Ibrahim, Osama Abd Al-Munaf;
Al-Ghezi, Moafaq K. S.

Publication type:

Article

Energy-Efficient Split AC Using PCM and Aluminum Oxide Nanoparticles: An Experimental Assessment.

Published in:

IUP Journal of Mechanical Engineering, 2025, v. 18, n. 2, p. 50, doi. 10.71329/IUPJMECH/2025.18.2.50-65

By:

Hussain, Shaik Mohammed;
Kattimani, Mohammed Asif;
Suleman, Mohammed;
Aijaz, Shaik;
Serikar, Shaik Zubair

Publication type:

Article

Parametric Study of a Finite-Time Steady Flow Reversed Lenoir Refrigeration Cycle.

Published in:

Engineering Letters, 2025, v. 33, n. 7, p. 2831

By:

Pai, Anand;
Bekal, Chandrakantha;
Shetty, Manjunath;
B., Satish Shenoy

Publication type:

Article

Experimental study of vapor compression refrigeration system using mixing refrigerant (R290/R600a) compare with nano refrigerant (R600a/Al<sub>2</sub>O<sub>3</sub>).

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 8, p. 177, doi. 10.12913/22998624/205278

By:

Youssif, Sura Saher;
Shabeeb, Omran A.;
Mahan, Hamid Mohammed;
Konovalov, Sergey V.;
Azeez Ismael, Ahmed Abdul

Publication type:

Article

THE EFFECTS OF TWISTED STRIPS WITH DIFFERENT LENGTH ON HEAT TRANSFER AND PRESSURE DROP IN CONCENTRIC HEAT EXCHANGER.

Published in:

Bitlis Eren University Journal of Science & Technology, 2025, v. 15, n. 1, p. 99, doi. 10.17678/beuscitech.1591461

By:

ARGUNHAN, Zeki;
YILDIZ, Cengiz;
E. L., Emin

Publication type:

Article

Energy and Quality Assessment in the Cooling of Crushed Bombino Nero Grapes with Indirect Heat Exchange System and Direct Heat Exchange System with CO 2.

Published in:

Sci (2413-4155), 2025, v. 7, n. 2, p. 42, doi. 10.3390/sci7020042

By:

Giametta, Ferruccio;
Catalano, Filippo;
Tanucci, Gianluca;
Fioschi, Gabriele;
Paradiso, Vito Michele;
Bianchi, Biagio

Publication type:

Article

Numerical simulation study for double pipe heat exchanger with spiral fins.

Published in:

Pollack Periodica, 2025, v. 20, n. 2, p. 136, doi. 10.1556/606.2024.01229

By:

Mutar, Duraid Majeed

Publication type:

Article

The optimal approach of various analysis methodologies of a dual-purpose solar collector.

Published in:

Pollack Periodica, 2025, v. 20, n. 2, p. 130, doi. 10.1556/606.2024.01244

By:

Hasan, Mustafa Moayad;
Hriczó, Krisztián

Publication type:

Article

Experimental Analysis of Thermal and Hydraulic Performance of Fiber-Reinforced Polymer Fins in Compact Heat Exchangers.

Published in:

International Journal of Automotive & Mechanical Engineering, 2025, v. 22, n. 2, p. 12496, doi. 10.15282/ijame.22.2.2025.18.0955

By:

Alshameri, M. H.;
Azizuddin, A. A.;
Arshad, A.;
Mohammed, H. G.;
Sadeq, S.

Publication type:

Article

Thermal-hydraulic design of a small passively liquid-metal-cooled reactor.

Published in:

Journal of Power Technologies, 2025, v. 105, n. 1, p. 1

By:

Thiele, Roman;
Anglart, Henryk

Publication type:

Article

Review of Automotive Thermoelectric Generator Structure Design and Optimization for Performance Enhancement.

Published in:

Processes, 2025, v. 13, n. 6, p. 1931, doi. 10.3390/pr13061931

By:

Wang, Yue;
Wang, Ruochen;
Chai, Ruiqian;
Ding, Renkai;
Ye, Qing;
Sun, Zeyu;
Meng, Xiangpeng;
Sun, Dong

Publication type:

Article

Development of a Hybrid Heat Exchange Air Conditioner with a Ground Heat Exchanger Placed Downstream from the Outdoor Unit Heat Exchanger.

Published in:

Processes, 2025, v. 13, n. 6, p. 1925, doi. 10.3390/pr13061925

By:

Funatani, Shumpei;
Tsukamoto, Yusaku;
Toriyama, Koji

Publication type:

Article

Mechanistic Insights into Ammonium Chloride Particle Deposition in Hydrogenation Air Coolers: Experimental and CFD-DEM Analysis.

Published in:

Processes, 2025, v. 13, n. 6, p. 1816, doi. 10.3390/pr13061816

By:

Yin, Haoyu;
Jin, Haozhe;
Liu, Xiaofei;
Wang, Chao;
Chen, Wei;
Chen, Fengguan;
Xu, Shuangqing;
Li, Shuangquan

Publication type:

Article

Overcoming Uncertainties Associated with Local Thermal Response Functions in Vertical Ground Heat Exchangers.

Published in:

Sustainability (2071-1050), 2025, v. 17, n. 12, p. 5509, doi. 10.3390/su17125509

By:

Extremera-Jiménez, Alejandro J.;
Casanova-Peláez, Pedro J.;
Yousif, Charles;
Cruz-Peragón, Fernando

Publication type:

Article

A Semi-Analytical Dynamic Model for Ground Source Heat Pump Systems: Addressing Medium- to Long-Term Performance Under Ground Temperature Variations.

Published in:

Sustainability (2071-1050), 2025, v. 17, n. 12, p. 5391, doi. 10.3390/su17125391

By:

Mahmoudi Majdabadi, Mohammad;
Koohi-Fayegh, Seama

Publication type:

Article

Enhancing Heat Transfer in Tubular Heat Exchanger Using Minijet Technology.

Published in:

Journal of Mines, Metals & Fuels, 2025, v. 73, n. 6, p. 1699, doi. 10.18311/jmmf/2025/49028

By:

Waware, Shital Yashwant;
Ahire, Pallavi Pankaj;
Ghutepatil, Priti Ravishankar;
Biradar, Ramdas;
Kadam, Arjun Arun;
Kore, Sandeep Sadashiv;
Kurhade, Anant Sidhappa;
Ghunake, Komal Baban

Publication type:

Article

Heat Exchange Equipment with Swirling Coolant Flows.

Published in:

Theoretical Foundations of Chemical Engineering, 2025, v. 59, n. 1, p. 203, doi. 10.1134/S0040579525700356

By:

Sokolov, A. E.;
Sidyagin, A. A.;
Kosyrev, V. M.

Publication type:

Article

A review of the use of scraped surface heat exchangers to crystallize fats and fat‐based products.

Published in:

Journal of the American Oil Chemists' Society (JAOCS), 2024, v. 101, n. 2, p. 151, doi. 10.1002/aocs.12747

By:

da Silva, Thais Lomonaco Teodoro;
Martini, Silvana

Publication type:

Article