Works matching DE "FRACTURE toughness testing"
Results: 316
Comparison of Mechanical Properties of Five Commercial Dental Core Build-Up Materials.
- Published in:
- Compendium of Continuing Education in Dentistry (15488578), 2013, v. 34, n. 1, p. 62
- By:
- Publication type:
- Article
The Effect of Single-Walled Carbon Nanotube (SWCNT) Concentration on the Mechanical and Rheological Behavior of Epoxy Matrix.
- Published in:
- Mechanics of Composite Materials, 2020, v. 56, n. 4, p. 523, doi. 10.1007/s11029-020-09900-7
- By:
- Publication type:
- Article
Combination of biological mechanisms for a concept study of a fracture-tolerant bio-inspired ceramic composite material.
- Published in:
- Journal of Materials Science, 2014, v. 49, n. 23, p. 8040, doi. 10.1007/s10853-014-8511-x
- By:
- Publication type:
- Article
Moisture content effect on the fracture characterisation of Pinus pinaster under mode I.
- Published in:
- Journal of Materials Science, 2014, v. 49, n. 21, p. 7371, doi. 10.1007/s10853-014-8375-0
- By:
- Publication type:
- Article
Composition-dependent fracture toughness of ROMP-based Dilulin/dicyclopentadiene copolymers.
- Published in:
- Journal of Materials Science, 2014, v. 49, n. 14, p. 4880, doi. 10.1007/s10853-014-8189-0
- By:
- Publication type:
- Article
Influence of high aluminium content on the mechanical properties of directionally solidified multicrystalline silicon.
- Published in:
- Journal of Materials Science, 2014, v. 49, n. 14, p. 4905, doi. 10.1007/s10853-014-8192-5
- By:
- Publication type:
- Article
Fiber-reinforced composites based on epoxy resins modified with elastomers and surface-modified silica nanoparticles.
- Published in:
- Journal of Materials Science, 2014, v. 49, n. 6, p. 2391, doi. 10.1007/s10853-013-7963-8
- By:
- Publication type:
- Article
Paper multilayer with a fracture toughness of steel.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 15, p. 5180, doi. 10.1007/s10853-013-7304-y
- By:
- Publication type:
- Article
Feasibility study of SiC-ceramics as a potential material for bone implants.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 15, p. 5295, doi. 10.1007/s10853-013-7321-x
- By:
- Publication type:
- Article
Effect of initial notch orientation on fracture toughness in fail-safe steel.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 13, p. 4766, doi. 10.1007/s10853-012-6874-4
- By:
- Publication type:
- Article
High strain rate behavior, transformation-induced plasticity and fracture toughness characterization of cast and additionally tempered Fe85Cr4Mo8V2C1 alloy manufactured using a rapid solidification technique.
- Published in:
- Journal of Materials Science, 2012, v. 47, n. 19, p. 6915, doi. 10.1007/s10853-012-6637-2
- By:
- Publication type:
- Article
Micro- and macro-mechanical testing of transparent MgAl<sub>2</sub>O<sub>4</sub> spinel.
- Published in:
- Journal of Materials Science, 2012, v. 47, n. 12, p. 4821, doi. 10.1007/s10853-012-6333-2
- By:
- Publication type:
- Article
Screw-blade fixation systems in Pauwels three femoral neck fractures: a biomechanical evaluation.
- Published in:
- 2018
- By:
- Publication type:
- journal article
Effects of rapid cooling treatment on heated sandstone: a comparison between water and liquid nitrogen cooling.
- Published in:
- Bulletin of Engineering Geology & the Environment, 2020, v. 79, n. 1, p. 313, doi. 10.1007/s10064-019-01571-6
- By:
- Publication type:
- Article
织物组织对增强复合板材断裂韧性的影响.
- Published in:
- Cotton Textile Technology, 2022, v. 50, n. 609, p. 5
- By:
- Publication type:
- Article
Effects of Zirconium and Yttrium Oxide on Mechanical and Oxidation Properties of Mo–3Si–1B–1Zr–1Y2O3 (wt.%) Alloy.
- Published in:
- Coatings (2079-6412), 2020, v. 10, n. 9, p. 833, doi. 10.3390/coatings10090833
- By:
- Publication type:
- Article
Development of the in-field sensor for estimation of fracture toughness and shear strength by measuring cutting forces.
- Published in:
- International Wood Products Journal, 2017, v. 8, p. 34, doi. 10.1080/20426445.2016.1232912
- By:
- Publication type:
- Article
An Experimental Study on the Determination of Shale K IC by Semi-Disk Three-Point Bending.
- Published in:
- Sustainability (2071-1050), 2023, v. 15, n. 3, p. 1863, doi. 10.3390/su15031863
- By:
- Publication type:
- Article
On the Modelling of Thermal Aging through Neutron Irradiation and Annealing.
- Published in:
- Advances in Materials Science & Engineering, 2018, p. 1, doi. 10.1155/2018/7175083
- By:
- Publication type:
- Article
Type I Fracture Toughness Test of Rock-like Materials Based on the Particle Flow Method.
- Published in:
- Advances in Civil Engineering, 2020, p. 1, doi. 10.1155/2020/8812205
- By:
- Publication type:
- Article
Mechanical properties of denture base resin materials: CAD/CAM versus traditional heat-cure.
- Published in:
- New Zealand Dental Journal, 2020, v. 116, n. 3, p. 81
- By:
- Publication type:
- Article
Effect of Hybridization of Carboxyl‐Terminated Acrylonitrile Butadiene Liquid Rubber and Alumina Nanoparticles on the Fracture Toughness of Epoxy Nanocomposites.
- Published in:
- Polymer Composites, 2019, v. 40, n. 7, p. 2700, doi. 10.1002/pc.25073
- By:
- Publication type:
- Article
Experimental investigation on the effects of carbon nanotubes on mode I interlaminar fracture toughness of laminated composites.
- Published in:
- Polymer Composites, 2018, v. 39, p. E797, doi. 10.1002/pc.24246
- By:
- Publication type:
- Article
Assessing the role of adhesives in durability of laminated veneer lumber (LVL) by fracture mechanics.
- Published in:
- Holzforschung: International Journal of the Biology, Chemistry, Physics, & Technology of Wood, 2016, v. 70, n. 8, p. 763, doi. 10.1515/hf-2015-0193
- By:
- Publication type:
- Article
Mode I and mode II delamination of a chopped strand mat E-glass reinforced vinyl ester composite.
- Published in:
- Plastics, Rubber & Composites, 2018, v. 47, n. 9, p. 391, doi. 10.1080/14658011.2018.1515287
- By:
- Publication type:
- Article
Study on Mechanical Properties of Volcanic Breccia in Mahu Area, Xinjiang.
- Published in:
- Geotechnical & Geological Engineering, 2020, v. 38, n. 6, p. 6353, doi. 10.1007/s10706-020-01440-0
- By:
- Publication type:
- Article
A new type of shale gas reservoirdcarbonate-rich shale: From laboratory mechanical characterization to field stimulation strategy.
- Published in:
- Petroleum Science (KeAi Communications Co.), 2024, v. 21, n. 5, p. 3047, doi. 10.1016/j.petsci.2024.05.018
- By:
- Publication type:
- Article
Effect of Hybridization of Carbon Fibers on Mechanical Properties of Cellulose Fiber–Cement Composites: A Response Surface Methodology Study.
- Published in:
- C, 2024, v. 10, n. 2, p. 41, doi. 10.3390/c10020041
- By:
- Publication type:
- Article
多壁碳纳米管对Ti-碳纤维/反应型聚酰亚胺超混杂层板力学性能的影响.
- Published in:
- Acta Materiae Compositae Sinica, 2020, v. 37, n. 3, p. 581, doi. 10.13801/j.cnki.fhclxb.20190611.005
- By:
- Publication type:
- Article
Estimation of Fracture Toughness of API 2W Gr.50 Steel in Ductile to Brittle Transition Behavior Using Master Curve Approach.
- Published in:
- Journal of Marine Science & Engineering, 2022, v. 10, n. 8, p. 1066, doi. 10.3390/jmse10081066
- By:
- Publication type:
- Article
Tribological Aspects of Cast Iron Investigated Via Fracture Toughness.
- Published in:
- Tribology in Industry, 2016, v. 38, n. 1, p. 1
- By:
- Publication type:
- Article
A Study on the Influence of the Conglomerate Mesostructure on Fracture Failure Behavior Based on Discrete Element Method.
- Published in:
- Geofluids, 2021, p. 1, doi. 10.1155/2021/8828265
- By:
- Publication type:
- Article
The Effect of Pre-Heating on Fracture Toughness in Three Distinct Composite Resin Systems at Two Different Temperatures: A Protocol for an In-vitro Study.
- Published in:
- Journal of Clinical & Diagnostic Research, 2023, v. 17, n. 6, p. 1, doi. 10.7860/JCDR/2023/58551.18054
- By:
- Publication type:
- Article
Mechanism and Method of Testing Fracture Toughness and Impact Absorbed Energy of Ductile Metals by Spherical Indentation Tests.
- Published in:
- Chinese Journal of Mechanical Engineering, 2023, v. 36, n. 1, p. 1, doi. 10.1186/s10033-023-00913-6
- By:
- Publication type:
- Article
数字光处理打印牙科氧化锆的微观结构和 机械性能研究.
- Published in:
- West China Journal of Stomatology, 2021, v. 39, n. 5, p. 576, doi. 10.7518/hxkq.2021.05.013
- By:
- Publication type:
- Article
Novel multifunctional microcapsule and its cyanate ester resin composites with self‐healing ability and gamma radiation shielding ability.
- Published in:
- Journal of Applied Polymer Science, 2023, v. 140, n. 1, p. 1, doi. 10.1002/app.53260
- By:
- Publication type:
- Article
Influence of carbon nanotubes/polyetherketone‐cardo interlayer structure on mode II interlaminar fracture toughness of the interleaved carbon fiber reinforced epoxy composites.
- Published in:
- Journal of Applied Polymer Science, 2022, v. 139, n. 30, p. 1, doi. 10.1002/app.52671
- By:
- Publication type:
- Article
Effect of matrix deformability on the fracture properties of epoxy resins modified with core–shell and cross‐linked rubber particles.
- Published in:
- Journal of Applied Polymer Science, 2022, v. 139, n. 23, p. 1, doi. 10.1002/app.52316
- By:
- Publication type:
- Article
An assessment of mechanical behavior of glass fiber/epoxy composites with secondary short carbon fiber reinforcements.
- Published in:
- Journal of Applied Polymer Science, 2022, v. 139, n. 12, p. 1, doi. 10.1002/app.51841
- By:
- Publication type:
- Article
Toughening of epoxy thermosets with nano‐sized or micron‐sized domains of poly(ethylene oxide)‐b‐poly(butadiene‐co‐acrylonitrile)‐b‐poly(ethylene oxide) triblock copolymers synthesized using room temperature ester coupling reaction
- Published in:
- Journal of Applied Polymer Science, 2021, v. 138, n. 13, p. 1, doi. 10.1002/app.50096
- By:
- Publication type:
- Article
基于小冲杆试验的X80 管道钢断裂韧性研究.
- Published in:
- Journal of China University of Petroleum, 2020, v. 44, n. 5, p. 131, doi. 10.3969/j.issn.1673-5005.2020.05.016
- By:
- Publication type:
- Article
Microstructural Effects on J‐Integral Fracture Toughness of Welded High‐Mn Steels at 298 and 77 K.
- Published in:
- Steel Research International, 2023, v. 94, n. 2, p. 1, doi. 10.1002/srin.202200259
- By:
- Publication type:
- Article
Loading Rate Requirements of a Compact Sandwich Test for Fracture Toughness Testing of Bone and Biomaterials.
- Published in:
- Trends in Biomaterials & Artificial Organs, 2016, v. 30, n. 2, p. 95
- By:
- Publication type:
- Article
"CAD‐on" Interfaces – Fracture Mechanics Characterization.
- Published in:
- Journal of Prosthodontics, 2019, v. 28, n. 9, p. 982, doi. 10.1111/jopr.13113
- By:
- Publication type:
- Article
Curing behavior, thermal, and mechanical properties of epoxy/polyamic acid based on 4,4′‐biphtalic dianhydride and 3,3′‐dihydroxybenzidine.
- Published in:
- Polymer Engineering & Science, 2020, v. 60, n. 8, p. 1917, doi. 10.1002/pen.25427
- By:
- Publication type:
- Article
Assessment of Fracture Toughness in Bone Tissue Engineering.
- Published in:
- Polymer Engineering & Science, 2019, v. 59, n. 12, p. 2402, doi. 10.1002/pen.25246
- By:
- Publication type:
- Article
Effect of geometric parameters on dynamic fracture toughness of compact tensile specimens.
- Published in:
- Mechanics Based Design of Structures & Machines, 2025, v. 53, n. 3, p. 2116, doi. 10.1080/15397734.2024.2402392
- By:
- Publication type:
- Article
Microencapsulated healing agents for an elevated-temperature cured epoxy: Influence of viscosity on healing efficiency.
- Published in:
- Polymers & Polymer Composites, 2021, v. 29, p. S1317, doi. 10.1177/09673911211045373
- By:
- Publication type:
- Article
A method for automated digital image‐based tracking of delamination fronts in translucent glass fibre‐laminated composite materials.
- Published in:
- Strain, 2020, v. 56, n. 4, p. 1, doi. 10.1111/str.12345
- By:
- Publication type:
- Article
A New Procedure for Mode I Fracture Characterization of Cement-Based Materials.
- Published in:
- Strain, 2015, v. 51, n. 6, p. 483, doi. 10.1111/str.12165
- By:
- Publication type:
- Article