Works about FRACTURE strength

Results: 1353

Mechanical Properties and Corrosion Kinetics of B<sub>4</sub>C/Al Composites.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4668, doi. 10.1007/s11837-025-07316-z

By:

Zhang, Liu;
Wang, Xiao;
Dong, Mengqi;
Qian, Qinghua;
Yang, Zirun

Publication type:

Article

The Rate-Dependent Shear Performance of Ni-Stabilized SAC/Cu Joints Under Isothermal Aging.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4173, doi. 10.1007/s11837-025-07209-1

By:

Li, Quanzhen;
Li, Chengming;
Wang, Xiaojing;
Cai, Shanshan;
Liu, Ning;
Liu, Chen;
Sun, Shaofu

Publication type:

Article

Post Endodontik Restorasyonlarda Kullanılan Post-Kor Sistemlerinin Kırılma Dayanımı Karşılaştırması.

Published in:

SDU Journal of Health Science Institute / SDÜ Saglik Bilimleri Enstitüsü Dergisi, 2025, v. 16, n. 1, p. 8, doi. 10.22312/sdusbed.1473407

By:

SAVAŞ, Deniz;
MADEN, Murat

Publication type:

Article

A Novel Approach to Dynamic Equi-Biaxial Testing of Thin Flexible Materials Using the Ring-on-Ring Test Method.

Published in:

Experimental Mechanics, 2025, v. 65, n. 5, p. 743, doi. 10.1007/s11340-025-01167-0

By:

Goyal, K.;
Singh, C.;
Subhash, G.

Publication type:

Article

Tooth Substrate vs Conventional Materials Used as a Base in Class V Cavities: A Comparative Study.

Published in:

International Journal of Clinical Pediatric Dentistry, 2025, v. 18, n. 3, p. 261, doi. 10.5005/jp-journals-10005-3073

By:

Goyal, Smiley;
Virk, Rupam;
Bhullar, Kanwalpreet K.;
Sahiwal, Harkiran;
Kant, Disha;
Deepanshu, Deepanshu

Publication type:

Article

The Effect of Sterilization Methods on the Mechanical Properties of 3D-Printed and Conventional PMMA Materials for Denture Bases of Immediate Obturators.

Published in:

Polymers (20734360), 2025, v. 17, n. 9, p. 1279, doi. 10.3390/polym17091279

By:

Cybulska, Anna;
Mańka-Malara, Katarzyna;
Krasowski, Michał;
Sokołowski, Jerzy;
Zwoliński, Jakub;
Rafalski, Andrzej;
Kostrzewa-Janicka, Jolanta

Publication type:

Article

Effect of Pulpal Base, Restorative Material, and Preparation Type on Marginal and Internal Fit and Fracture Strength of Endocrowns.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 2137, doi. 10.3390/ma18092137

By:

Yılmaz, Kerem;
Aydın, Hakan;
Gönüldaş, Fehmi;
Kara, Sukan;
Çiloğlu, Özge;
Özdemir, Erdem;
Bilen, Zeynep

Publication type:

Article

Mechanical Properties and Fracture Analysis of Advanced Nickel-Based Nanomembranes.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 1961, doi. 10.3390/ma18091961

By:

Lück, Janik Marius;
Rösler, Joachim

Publication type:

Article

Biomechanical design considerations of a 3D-printed tibiotalocalcaneal nail for ankle joint fusion.

Published in:

3D Printing in Medicine, 2025, v. 11, n. 1, p. 1, doi. 10.1186/s41205-025-00268-9

By:

Wong, Kin Weng;
Huang, Shao-Fu;
Yeh, Skye Hsin-Hsien;
Yang, Tai-Hua;
Liang, Cheng-Yi;
Lin, Chun-Li

Publication type:

Article

Push-out Bond Strength of Bulk-Fill Composites Used as Intracanal Anchorage Material.

Published in:

Journal of Adhesive Dentistry, 2025, v. 27, p. 81, doi. 10.3290/j.jad.c_1991

By:

Sturm, Richard;
Shemesh, Hagay;
Bortel, Emely;
Hesse, Bernhard;
Bitter, Kerstin

Publication type:

Article

IDENTIFYING THE EFFECT OF THE HYDRATED LIME ON SELF-HEALING STEEL SLAG STONE MASTIC ASPHALT USING THE INDUCTION HEATING METHOD IN TROPICAL CONDITIONS.

Published in:

Eastern-European Journal of Enterprise Technologies, 2025, v. 2, n. 6(134), p. 33, doi. 10.15587/1729-4061.2025.325722

By:

Irawati;
Djakfar, Ludfi;
Arifin, Muhammad Zainul;
Sabarudin, Akhmad;
Dewi, Ilanka Cahya;
Palgunadi, Irawan

Publication type:

Article

Achieving High‐Strength Polymer Adhesion Through Bond Exchange at the Interphase.

Published in:

Macromolecular Rapid Communications, 2025, v. 46, n. 9, p. 1, doi. 10.1002/marc.202401059

By:

Ohnishi, Ryota;
Hayashi, Mikihiro

Publication type:

Article

Elastomeric Nanocomposite with Solvent‐Free, One Step, In Situ Shear Exfoliation of Graphite to Graphene.

Published in:

Advanced Materials Interfaces, 2025, v. 12, n. 9, p. 1, doi. 10.1002/admi.202400803

By:

Rahman, Ashiqur;
Salam, Abdur Rahman Bin Abdus;
Boebinger, Matthew G.;
Touhami, Ahmed;
Lynch, Jennifer;
Ashraf, Ali

Publication type:

Article

Advance in the research on the interface constitutive relationship of SiC<sub>p</sub>/Al composites.

Published in:

Composite Interfaces, 2025, v. 32, n. 5, p. 787, doi. 10.1080/09276440.2024.2442168

By:

Pu, Junjie;
Li, Guohe;
Huang, Ruifang;
Qiao, Qingrui;
Zhao, Xutao

Publication type:

Article

Oxidation control in arc-sprayed SS420 coating.

Published in:

Surface Engineering, 2021, v. 37, n. 5, p. 581, doi. 10.1080/02670844.2020.1840696

By:

Tailor, Satish;
Vashishtha, Nitesh;
Modi, Ankur;
Modi, S. C.

Publication type:

Article

Crack healing in Y-doped Cr 2 AlC-MAX phase coatings.

Published in:

Surface Engineering, 2017, v. 33, n. 3, p. 192, doi. 10.1080/02670844.2016.1201366

By:

Berger, O.;
Boucher, R.

Publication type:

Article

Correlation between microstructural evolution and mechanical properties of CMDB propellant during uniaxial tension.

Published in:

Propellants, Explosives, Pyrotechnics, 2023, v. 48, n. 10, p. 1, doi. 10.1002/prep.202300117

By:

Wu, Chengfeng;
Liu, Yuanxiang;
Hu, Shaoqing;
Lu, Yingying;
Guo, Changchao;
Li, Huan;
Qu, Hongjian;
Fu, Xuejin;
Li, Hongyan

Publication type:

Article

Feasibility of Detonation in Porous Silicon Nanoenergetics.

Published in:

Propellants, Explosives, Pyrotechnics, 2021, v. 46, n. 8, p. 1260, doi. 10.1002/prep.202000311

By:

Guerieri, Philip M.;
Fuchs, Brian;
Churaman, Wayne A.

Publication type:

Article

Thickness Dependence of the Mechanical Properties of Free-Standing Graphene Oxide Papers.

Published in:

Advanced Functional Materials, 2015, v. 25, n. 24, p. 3756, doi. 10.1002/adfm.201500998

By:

Gong, Tao;
Lam, Do Van;
Liu, Renlong;
Won, Sejeong;
Hwangbo, Yun;
Kwon, Sanghyuk;
Kim, Jinseon;
Sun, Ke;
Kim, Jae‐Hyun;
Lee, Seung‐Mo;
Lee, Changgu

Publication type:

Article

Effects of cerium oxide doping on the microstructure and properties of ITO targets and the photoelectric properties of the films.

Published in:

Journal of Materials Science: Materials in Electronics, 2019, v. 30, n. 16, p. 15469, doi. 10.1007/s10854-019-01923-8

By:

Huang, Jingwei;
Yuan, Tiechui;
Mei, Fangsheng;
Li, Ruidi

Publication type:

Article

Effect of aliovalent Si/Bi partial substitution on propagation mechanisms of cracking and dislocation in Bi-2212 crystal system.

Published in:

Journal of Materials Science: Materials in Electronics, 2019, v. 30, n. 8, p. 7314, doi. 10.1007/s10854-019-01044-2

By:

Turgay, T.;
Yildirim, G.

Publication type:

Article

Experimental and statistical investigation of the impact of laser process parameters on the mechanical properties of H13 tool steel bulk.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 1/2, p. 367, doi. 10.1007/s00170-024-14539-y

By:

Baali, Lamya;
Iltaf, Asim;
Dehghan, Shayan;
Barka, Noureddine;
Dassylva-Raymond, Véronique;
Omidi, Narges;
Belzile, Claude;
Farhadipour, Pedram

Publication type:

Article

Analytical prediction of subsurface damage depth of monocrystalline silicon in ultrasonic vibration assisted wire sawing.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 5/6, p. 2445, doi. 10.1007/s00170-024-13846-8

By:

Wang, Yan;
Bai, Tianqi;
Shu, Li;
Su, Jinhuan;
Xu, Kangwei

Publication type:

Article

Unraveling the main issues of direct sample printing and sample cutting from a sheet of tensile test samples for characterization of Material Extrusion components.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 5/6, p. 2991, doi. 10.1007/s00170-024-13572-1

By:

Lambiase, Francesco;
Scipioni, Silvia Ilaria;
Pace, Francesco;
Paoletti, Alfonso

Publication type:

Article

Investigation on the high-feed milling of M28.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 1/2, p. 127, doi. 10.1007/s00170-023-12005-9

By:

Jiang, Yifan;
Yang, Xu;
Tian, Hui;
Ma, Liangdong;
Li, Liang;
Yang, Yinfei

Publication type:

Article

Effect of tool pin length on interfacial behaviors and mechanical properties of friction stir-welded lap joints of 430/304 stainless steels.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 1/2, p. 593, doi. 10.1007/s00170-023-11135-4

By:

Guo, Guolin;
Shen, Yifu;
Ou, Wenmin;
Yu, Xueyong;
Cui, Chenshuo;
Xu, Zhengya;
Zhou, Sheng;
Chen, Hongming

Publication type:

Article

Study of deformation and fracture of high strength steel sheet during conventional and robust trimming by conducting partial trimming tests.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 7/8, p. 5255, doi. 10.1007/s00170-022-09607-0

By:

Cui, Zeyuan;
Green, Daniel;
Alpas, Ahmet T.

Publication type:

Article

Finite element simulation and experiment of a new ring constrained groove pressing for 5083 aluminum alloy based on cyclic stress state.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3503, doi. 10.1007/s00170-021-07124-0

By:

Gu, Yongfei;
Li, Hongfeng;
Huang, Zhiheng;
Zhang, Chunxiang;
Luo, Junting

Publication type:

Article

A hybrid additive manufacturing platform based on fused filament fabrication and direct ink writing techniques for multi-material 3D printing.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3551, doi. 10.1007/s00170-021-06891-0

By:

Cadiou, Thibaut;
Demoly, Frédéric;
Gomes, Samuel

Publication type:

Article

Friction stir spot welding of AA6061-T6 and Cu with preheating: Strength and failure behavior at different test temperatures.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 108, n. 5/6, p. 1613, doi. 10.1007/s00170-020-05498-1

By:

Garg, Ashu;
Bhattacharya, Anirban

Publication type:

Article

Micro-drilling characteristics of sequential glass fiber-reinforced resin-based/copper foil multi-layer sheets.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 107, n. 1/2, p. 399, doi. 10.1007/s00170-020-05038-x

By:

Tang, Zimin;
Huang, Xin;
Wang, Chengyong;
Liao, Bingmiao;
Lin, Dantian;
Yao, Junxiong;
Zheng, Lijuan

Publication type:

Article

Investigation of the effects of pre-cross-linked thermoset molding compounds on weld line strength in injection molding.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 1-4, p. 1723, doi. 10.1007/s00170-019-04306-9

By:

Zhao, Yang;
Mattner, Tobias;
Drummer, Dietmar

Publication type:

Article

Effect of selective laser melting process parameters on microstructure and mechanical properties of 316L stainless steel helical micro-diameter spring.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 104, n. 5-8, p. 2117, doi. 10.1007/s00170-019-03928-3

By:

Huang, Mingji;
Zhang, Zongxin;
Chen, Ping

Publication type:

Article

Interlayer fracture energy of 3D-printed PLA material.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 101, n. 5-8, p. 1959, doi. 10.1007/s00170-018-3031-5

By:

Noori, Hadi

Publication type:

Article

Experimental study on surface topography and fracture strength of worn saw wire in multi-wire sawing.

Published in:

International Journal of Advanced Manufacturing Technology, 2017, v. 93, n. 9-12, p. 4125, doi. 10.1007/s00170-017-0854-4

By:

Li, Zhen;
Wang, Minjie;
Cai, Yujun;
Jia, Haili

Publication type:

Article

Theoretical investigation on interface interaction and properties of 3-nitro-1,2,4-triazol-5-one (NTO)/fluoropolymer polymer-bonded explosives (PBXs).

Published in:

Theoretical Chemistry Accounts: Theory, Computation, & Modeling, 2022, v. 141, n. 11, p. 1, doi. 10.1007/s00214-022-02935-0

By:

Huang, Ying;
Guo, Qianjin;
Gou, Ruijun;
Zhu, Shuangfei;
Zhang, Shuhai;
Yuan, Xiaofeng;
Chen, Yahong

Publication type:

Article

Effects of screw channel angulation on the fracture resistance of one‐piece zirconia crown with titanium base.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2025, v. 34, n. 2, p. 167, doi. 10.1111/jopr.13806

By:

Wei, Chen‐xuan;
Saglik, Berna;
Sung Hsieh, Hsiao Hsin;
Guram, Paramvir Singh J.

Publication type:

Article

Analysis of implant‐supported cantilever fixed partial denture: An in vitro comparative study on vertical misfit, stress distribution, and cantilever fracture strength.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2024, v. 33, n. 6, p. 584, doi. 10.1111/jopr.13739

By:

Peixoto, Raniel Fernandes;
Tonin, Bruna Santos Honório;
Pinto‐Fiamengui, Lívia Maria Sales;
Freitas‐Pontes, Karina Mattes;
Regis, Rômulo Rocha;
Mattos, Maria da Glória Chiarello de

Publication type:

Article

Fracture strength of anterior cantilever resin‐bonded fixed partial dentures fabricated from high translucency zirconia with different intaglio surface treatments.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2024, v. 33, n. 4, p. 358, doi. 10.1111/jopr.13694

By:

Al‐Wahadni, Ahed;
Dkmak, Mhd Salim Fissal;
Almohammed, Saleh;
Hatamleh, Muhanad M.;
Tabanjah, Abedelmalek

Publication type:

Article

Effect of incisal preparation design on the fracture strength of monolithic zirconia‐reinforced lithium silicate laminate veneers.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2024, v. 33, n. 3, p. 281, doi. 10.1111/jopr.13689

By:

Jurado, Carlos A.;
Sadid‐Zadeh, Ramtin;
Watanabe, Hidehiko;
Robbins, Craig E.;
Afrashtehfar, Kelvin I.;
Fischer, Nicholas G.;
Lee, Damian J.

Publication type:

Article

Fracture strength of screw‐retained zirconia crowns assembled on zirconia and titanium implants.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2024, v. 33, n. 3, p. 273, doi. 10.1111/jopr.13683

By:

Sadid‐Zadeh, Ramtin;
Lin, Kevin;
Li, Rui;
Nagy, Katalin

Publication type:

Article

Fracture strength of flared root canals reinforced using different post and core materials.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2023, v. 32, n. 7, p. 639, doi. 10.1111/jopr.13616

By:

Tsukahara, Ruri;
Komada, Wataru;
Oishi, Shinya;
Yoshimatsu, Shu;
Miura, Hiroyuki;
Fueki, Kenji

Publication type:

Article

The influence of horizontal glass fiber posts on fracture strength and fracture pattern of endodontically treated teeth: A systematic review and meta‐analysis of in vitro studies.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2023, v. 32, n. 6, p. 469, doi. 10.1111/jopr.13654

By:

Abdulrab, Saleem;
Geerts, Greta;
Al‐Maweri, Sadeq Ali;
Alhajj, Mohammed Nasser;
Alhadainy, Hatem;
Ba‐Hattab, Raidan

Publication type:

Article

Fracture strength of monolithic and glass‐soldered ceramic subcomponents of 5‐unit fixed dental prosthesis.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2023, v. 32, n. 4, p. e71, doi. 10.1111/jopr.13586

By:

Sass, Jan‐Oliver;
Burmeister, Ulrike;
Ganz, Cornelia;
Mitrovic, Aurica;
Lang, Hermann;
Bader, Rainer;
Vogel, Danny

Publication type:

Article

Mechanical Properties of Additively Manufactured and Milled Interim 3‐Unit Fixed Dental Prostheses.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2023, v. 32, n. 3, p. 234, doi. 10.1111/jopr.13524

By:

Legaz, Juan;
Sailer, Irena;
Mojon, Philippe;
Lee, Hyeonjong;
Karasan, Duygu

Publication type:

Article

Fracture Strength of Interim CAD/CAM and Conventional Partial Fixed Dental Prostheses.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2021, v. 30, n. 8, p. 720, doi. 10.1111/jopr.13325

By:

Sadid‐Zadeh, Ramtin;
Zirkel, Cory;
Makwoka, Seteven;
Li, Rui

Publication type:

Article

Mechanical Behavior and Fracture Loads of Screw‐Retained and Cement‐Retained Lithium Disilicate Implant‐Supported Crowns.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2021, v. 30, n. 8, p. 690, doi. 10.1111/jopr.13298

By:

Camatta, Hercules Pessin;
Ferreira, Rodrigo Melim;
Ferrairo, Brunna Mota;
Strelhow, Samira Sandy;
Rubo, José Henrique;
Mori, Aline Akemi;
Ferruzzi, Fernanda

Publication type:

Article

Zirconia Primers Improve the Shear Bond Strength of Dental Zirconia.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2020, v. 29, n. 1, p. 62, doi. 10.1111/jopr.13013

By:

Steiner, René;
Heiss‐Kisielewsky, Irene;
Schwarz, Vincent;
Schnabl, Dagmar;
Dumfahrt, Herbert;
Laimer, Johannes;
Steinmassl, Otto;
Steinmassl, Patricia‐Anca

Publication type:

Article

Microstructural and Mechanical Characterization of CAD/CAM Materials for Monolithic Dental Restorations.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2019, v. 28, n. 2, p. e587, doi. 10.1111/jopr.12964

By:

Furtado de Mendonca, Arthur;
Shahmoradi, Mahdi;
Gouvêa, Cresus Vinicius Depes de;
Souza, Grace M.;
Ellakwa, Ayman

Publication type:

Article

Fracture Resistance of Pressed and Milled Lithium Disilicate Anterior Complete Coverage Restorations Following Endodontic Access Preparation.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2019, v. 28, n. 2, p. 163, doi. 10.1111/jopr.12798

By:

Gerogianni, Petrina;
Lien, Wen;
Bompolaki, Despoina;
Verrett, Ronald;
Haney, Stephan;
Mattie, Patrick;
Johnson, Russell

Publication type:

Article