Works matching DE "FORGING (Manufacturing process)"

Results: 51

HYBRID M.A. AND HOT FORGING MANUFACTURING PROCESS: MAKING PREFORMS BY LOCALIZED FUSION DEPOSITION OF MATERIALS USING UTP AF DUR 600 WIRE.

Published in:

Environmental & Social Management Journal / Revista de Gestão Social e Ambiental, 2025, v. 19, n. 5, p. 1, doi. 10.24857/rgsa.v19n5-139

By:

Ferreira, Carlos;
Schaeffer, Líiro;
Daleffe, Anderson;
Castelan, Jovani;
Casagrande, Henrique;
de March, Gilson

Publication type:

Article

ADDITIVE MANUFACTURING IN THE FORGING PROCESS: PREFORM MANUFACTURING THROUGH MATERIAL DEPOSITION BY LOCALIZED FUSION USING LOW CARBON WIRE.

Published in:

Environmental & Social Management Journal / Revista de Gestão Social e Ambiental, 2025, v. 19, n. 5, p. 1, doi. 10.24857/rgsa.v19n5-137

By:

Cechinel Casagrande, Henrique;
Daleffe, Anderson;
Antônio Ferreira, Carlos;
Milanez, Alexandre;
de March, Gilson;
Schaeffer, Lírio

Publication type:

Article

Die Life Prediction and Process of Cold Rotary Forging for Hypoid Gears.

Published in:

2019

By:

DANG Yugong;
DU Dewei;
GAO Zhenshan;
DENG Xiaozhong

Publication type:

Abstract

Maintenance Supervision of the Dies Condition and Technological Quality of Forged Products in Industrial Conditions.

Published in:

Management & Production Engineering Review (MPER), 2021, v. 12, n. 2, p. 27, doi. 10.24425/mper.2021.137675

By:

Krajewska-Spiewak, Joanna;
Turek, Jan;
Gawlik, Józef

Publication type:

Article

Investigation of Simulation Parameters for Flash-Reduced Forging of Two-Cylinder Crankshafts.

Published in:

Steel Research International, 2016, v. 87, n. 7, p. 824, doi. 10.1002/srin.201500279

By:

Behrens, Bernd‐Arno;
Stonis, Malte;
Blohm, Thoms;
Rüther, Tilmann;
Güzey, Gürbüz

Publication type:

Article

Filling 'An Immense Brain with Very Little in the Brain' for 'Perpetual Memory': Folklore Archiving New and Old.

Published in:

Journal of Folklore Research, 2015, v. 52, n. 1, p. 99, doi. 10.2979/jfolkrese.52.1.99

By:

Gilmore, Janet C.

Publication type:

Article

Development of a Technology for a 16 MN Forging Press at the Electrostal Metallurgical Plant.

Published in:

Metallurgist, 2017, v. 61, n. 7/8, p. 694, doi. 10.1007/s11015-017-0551-4

By:

Kabanov, I.;
Glushenkova, S.;
Polozhentsev, K.;
Dmitriev, A.;
Pasechnyi, A.

Publication type:

Article

Optimization of the Forging Process of an Aerofoil Blade using the Finite Element Analysis and Response Surface Method.

Published in:

International Journal of Advanced Design & Manufacturing Technology, 2015, v. 8, n. 1, p. 35

By:

Alimirzaloo, V.;
Biglari, F. R.

Publication type:

Article

Thermoelastic deformation of three-layer combined die under steady-state temperature field.

Published in:

Journal of Thermal Stresses, 2016, v. 39, n. 1, p. 103, doi. 10.1080/01495739.2015.1123958

By:

Hu, Chengliang;
Yang, Fengyu;
Zhao, Zhen;
Zeng, Fan

Publication type:

Article

Influence of Sodium Chloride Doping on Thermoelectric Properties of p-type SnSe.

Published in:

Journal of Electronic Materials, 2017, v. 46, n. 11, p. 6662, doi. 10.1007/s11664-017-5715-2

By:

Yang, Shi;
Nutor, Raymond;
Chen, Zi;
Zheng, Hao;
Wu, Hai;
Si, Jian

Publication type:

Article

An analytical cost estimation model for the design of axisymmetric components with open-die forging technology.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 110, n. 7/8, p. 1869, doi. 10.1007/s00170-020-05948-w

By:

Campi, Federico;
Mandolini, Marco;
Favi, Claudio;
Checcacci, Emanuele;
Germani, Michele

Publication type:

Article

Online measuring method of radial section line for ring forgings.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 101, n. 9-12, p. 3035, doi. 10.1007/s00170-018-3104-5

By:

Zhang, Yu-cun;
Miao, Shu;
Fu, Xian-bin;
Li, Qun;
Gao, Jun-hua

Publication type:

Article

Preform optimization and microstructure analysis on hot precision forging process of a half axle flange.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 95, n. 5-8, p. 2157, doi. 10.1007/s00170-017-1377-8

By:

Weiyan Sun;
Liang Chen;
Tailiang Zhang;
Koubao Zhang;
Guoqun Zhao;
Guangchun Wang

Publication type:

Article

PDZ evolution of hot ACDR and forging processes during titanium alloy disc forming.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 95, n. 5-8, p. 1635, doi. 10.1007/s00170-017-1135-y

By:

Yong Zheng;
Dong Liu;
Yanhui Yang;
Zhe Zhang;
Xiaolong Li

Publication type:

Article

Solid-state resistance seam welding of galvanized steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2016, v. 86, n. 5-8, p. 1385, doi. 10.1007/s00170-015-8294-5

By:

Mira-Aguiar, T.;
Leitão, C.;
Rodrigues, D.

Publication type:

Article

A simple online modeling approach for a time-varying forging process.

Published in:

International Journal of Advanced Manufacturing Technology, 2014, v. 75, n. 5-8, p. 1197, doi. 10.1007/s00170-014-6188-6

By:

Lu, XinJiang;
Huang, MingHui

Publication type:

Article

An iterative numerical method for determination of temperature-dependent friction coefficients in thermomechanical model analysis of cold bolt forging.

Published in:

International Journal of Advanced Manufacturing Technology, 2013, v. 68, n. 9-12, p. 2133, doi. 10.1007/s00170-013-4831-2

By:

Ince, U.;
Güden, M.

Publication type:

Article

High-strength zirconium diboride-based ceramic composites consolidated by low-temperature hot pressing.

Published in:

Science & Technology of Advanced Materials, 2012, v. 13, n. 4, p. 1, doi. 10.1088/1468-6996/13/4/045007

By:

Guo, Shuqi;
Kagawa, Yutaka

Publication type:

Article

High-Performance Applications of Metals and Alloys: Material Properties, Behaviour Modeling, Optimal Design and Advanced Processes.

Published in:

Metals (2075-4701), 2023, v. 13, n. 8, p. 1485, doi. 10.3390/met13081485

By:

Fragassa, Cristiano;
Lesiuk, Grzegorz;
Epp, Jeremy

Publication type:

Article

EFFECT OF HEAT LOAD TO THE FORMING MACHINES.

Published in:

MM Science Journal, 2013, p. 418

By:

Chval, Zdenek

Publication type:

Article

Numerical Investigation on the Strain Evolution of Ti-6Al-4V Alloy during Multi-directional Forging at Elevated Temperatures.

Published in:

High Temperature Materials & Processes, 2018, v. 37, n. 6, p. 571, doi. 10.1515/htmp-2016-0223

By:

Chenkan Yan;
Jun Shen;
Peng Lin

Publication type:

Article

Numerical and Experimental Research on Cold Compression Deformation Method for Reducing Quenching Residual Stress of 7A85 Aluminum Alloy Thick Block Forging.

Published in:

Advances in Materials Science & Engineering, 2017, p. 1, doi. 10.1155/2017/7059389

By:

Jin-dong, Cui;
You-ping, Yi;
Guo-yun, Luo

Publication type:

Article

NUMERICAL SIMULATION IN THE DESIGN OF THE FORGING TECHNOLOGY FOR REVOLUTION GEOMETRY PRODUCTS.

Published in:

Metalurgia, 2013, v. 65, n. 4, p. 40

By:

NEAG, Adriana;
NISTOR, Liviu

Publication type:

Article

NUMERICAL SIMULATION IN THE DESIGN OF THE FORGING TECHNOLOGY FOR REVOLUTION GEOMETRY PRODUCTS.

Published in:

Metalurgia, 2013, v. 65, n. 4, p. 5

By:

NEAG, Adriana;
NISTOR, Liviu

Publication type:

Article

Interrelation of Crystallographic Orientations of Grains in Aluminum Alloy AMg6 Under Hot Deformation and Recrystallization.

Published in:

Metal Science & Heat Treatment, 2015, v. 56, n. 11/12, p. 650, doi. 10.1007/s11041-015-9816-3

By:

Rusakov, G.;
Illarionov, A.;
Loginov, Yu.;
Lobanov, M.;
Redikul'tsev, A.

Publication type:

Article

ANALYSIS OF THE IMPACT OF FORGING AND TRIMMING TOOLS WEAR ON THE DIMENSION-SHAPE PRECISION OF FORGINGS OBTAINED IN THE PROCESS OF MANUFACTURING COMPONENTS FOR THE AUTOMOTIVE INDUSTRY.

Published in:

Maintenance & Reliability / Eksploatacja i Niezawodność, 2019, v. 21, n. 3, p. 476, doi. 10.17531/ein.2019.3.14

By:

HAWRYLUK, Marek;
KONDRACKI, Piotr;
KRAWCZYK, Jakub;
RYCHLIK, Marcin;
ZIEMBA, Jacek

Publication type:

Article

Simulation of the macrostructure influence of forging ingots on the potential capabilities of obtaining high-quality forgings.

Published in:

Metallurgical & Mining Industry, 2016, n. 7, p. 18

By:

V. A., Belevitin;
Y. N., Smyrnov;
S. Y., Kovalenko;
A. V., Suvorov

Publication type:

Article

Impact behaviour of carbon/polymer composites made by hot pressing moulding Experimental and comparative study.

Published in:

Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2015, v. 25, n. 1, p. 69, doi. 10.3166/RCMA.25.69-87

By:

Kamgaing Somoh, Georges;
Renard, Jacques

Publication type:

Article

Densification of ZrCx-ZrB2 Composites by Reactive Hot Pressing at Low Applied Pressure.

Published in:

Metallurgical & Materials Transactions. Part A, 2018, v. 49, n. 8, p. 3539, doi. 10.1007/s11661-018-4647-7

By:

Kannan, Rajaguru;
Rangaraj, Lingappa

Publication type:

Article

On the possible contribution of meteoritic metal to Ni‐rich Indonesian kris daggers: Comparing original daggers and newly forged analog objects.

Published in:

Meteoritics & Planetary Science, 2025, v. 60, n. 5, p. 1023, doi. 10.1111/maps.14340

By:

Brandstätter, Franz;
de Winter, Niels J.;
Migliori, Alessandro;
Padillia‐Alvarez, Roman;
Topa, Dan;
Visser, Seerp;
Goderis, Steven;
Claeys, Philippe;
Koeberl, Christian

Publication type:

Article

WEAR ANALYSIS OF DIE INSERTS IN THE HOT FORGING PROCESS OF A FORKED TYPE FORGING USING REVERSE SCANNING TECHNIQUES.

Published in:

Advances in Science & Technology Research Journal, 2017, v. 11, n. 4, p. 225, doi. 10.12913/22998624/80318

By:

Dworzak, Łukasz;
Hawryluk, Marek;
Ziemba, Jacek

Publication type:

Article

INVESTIGATION OF THE EFFECT OF FORGING TEMPERATURE ON THE MICROSTRUCTURE OF GRADE 5 TITANIUM ELI.

Published in:

Advances in Science & Technology Research Journal, 2017, v. 11, n. 4, p. 147, doi. 10.12913/22998624/76488

By:

Dziubińska, Anna;
Majerski, Krzysztof;
Winiarski, Grzegorz

Publication type:

Article

Multi-Stage Cold Forging Process for Manufacturing a High-Strength One-Body Input Shaft.

Published in:

Materials (1996-1944), 2021, v. 14, n. 3, p. 532, doi. 10.3390/ma14030532

By:

Jo, A Ra;
Jeong, Myeong Sik;
Lee, Sang Kon;
Moon, Young Hoon;
Hwang, Sun Kwang

Publication type:

Article

Properties and Structure of In Situ Transformed PAN-Based Carbon Fibers.

Published in:

Materials (1996-1944), 2018, v. 11, n. 6, p. 1017, doi. 10.3390/ma11061017

By:

Cao, Jingjing;
Zhao, Wenwu;
Gao, Shuzhen

Publication type:

Article

Investigation of the Microstructure and Mechanical Properties of Copper-Graphite Composites Reinforced with Single-Crystal α-Al2O3 Fibres by Hot Isostatic Pressing.

Published in:

Materials (1996-1944), 2018, v. 11, n. 6, p. 982, doi. 10.3390/ma11060982

By:

Zhang, Guihang;
Jiang, Xiaosong;
Qiao, ChangJun;
Shao, Zhenyi;
Zhu, Degui;
Zhu, Minhao;
Valcarcel, Victor

Publication type:

Article

Microstructure and Mechanical Properties of TiC0.7N0.3-HfC-WC-Ni-Mo Cermet Tool Materials.

Published in:

Materials (1996-1944), 2018, v. 11, n. 6, p. 968, doi. 10.3390/ma11060968

By:

Gao, Jiaojiao;
Song, Jinpeng;
Lv, Ming

Publication type:

Article

Conjectured the Behaviour of a Recycled Metal Matrix Composite (MMC–AlR) Developed through Hot Press Forging by Means of 3D FEM Simulation.

Published in:

Materials (1996-1944), 2018, v. 11, n. 6, p. 958, doi. 10.3390/ma11060958

By:

Ahmad, Azlan;
Lajis, Mohd Amri;
Shamsudin, Shazarel;
Yusuf, Nur Kamilah

Publication type:

Article

On the Role of Processing Parameters in Producing Recycled Aluminum AA6061 Based Metal Matrix Composite (MMC-AlR) Prepared Using Hot Press Forging (HPF) Process.

Published in:

Materials (1996-1944), 2017, v. 10, n. 9, p. 1098, doi. 10.3390/ma10091098

By:

Ahmad, Azlan;
Lajis, Mohd Amri;
Yusuf, Nur Kamilah

Publication type:

Article

ANALYSIS OF STRESS DISTRIBUTION IN THE FORGING PRESS.

Published in:

Annals of DAAAM & Proceedings, 2015, v. 26, n. 1, p. 0488, doi. 10.2507/26th.daaam.proceedings.065

By:

Chval, Zdenek;
Raz, Karel;
Cechura, Milan

Publication type:

Article

APPLICATION OF NUMERICAL SIMULATION FOR ANALYSIS AND OPTIMIZATION OF FORGING MANUFACTURING PROCESS.

Published in:

Archives of Metallurgy & Materials, 2024, v. 69, n. 2, p. 733, doi. 10.24425/amm.2024.149804

By:

SOBOCIŃSKI, M.;
NABRDALIK, M.

Publication type:

Article

An Analysis Of The Industrial Forging Process Of Flange In Order To Reduce The Weight Of The Input Material.

Published in:

Archives of Metallurgy & Materials, 2015, v. 60, n. 2, p. 849, doi. 10.1515/amm-2015-0217

By:

Gronostajski, Z.;
Hawryluk, M.;
Kaszuba, M.;
Misiun, G.;
Niechajowicz, A.;
Polak, S.;
Pawełczyk, M.

Publication type:

Article

Possibilities of Increasing the Durability of Dies Used in the Extrusion Process of Valve Forgings from Chrome-Nickel Steel by Using Alternative Materials from Hot-Work Tool Steels.

Published in:

Materials (1996-1944), 2024, v. 17, n. 2, p. 346, doi. 10.3390/ma17020346

By:

Hawryluk, Marek;
Janik, Marta;
Zwierzchowski, Maciej;
Lachowicz, Marzena Małgorzata;
Krawczyk, Jakub

Publication type:

Article

Achieving Fine Beta Grain Structure in a Metastable Beta Titanium Alloy Through Multiple Forging-Annealing Cycles.

Published in:

Metallurgical & Materials Transactions. Part A, 2016, v. 47, n. 7, p. 3633, doi. 10.1007/s11661-016-3496-5

By:

Zafari, Ahmad;
Ding, Yunpeng;
Cui, Jianzhong;
Xia, Kenong

Publication type:

Article

Microstructure and compression properties of in situ dual phase nanosized (TiB2-Ti5Si3)/TiAl matrix composites fabricated by combustion synthesis and hot press consolidation.

Published in:

Powder Metallurgy, 2015, v. 58, n. 3, p. 235, doi. 10.1179/1743290115Y.0000000010

By:

Qiu, F.;
He, Y.;
Zhu, L.;
Shu, S. L.;
Hu, W.;
Zhan, C. H.;
Jiang, Q. C.

Publication type:

Article

Long Short-Term Memory Autoencoder and Extreme Gradient Boosting-Based Factory Energy Management Framework for Power Consumption Forecasting.

Published in:

Energies (19961073), 2024, v. 17, n. 15, p. 3666, doi. 10.3390/en17153666

By:

Moon, Yeeun;
Lee, Younjeong;
Hwang, Yejin;
Jeong, Jongpil

Publication type:

Article

Comparative Thermal Aging Effects on PM-HIP and Forged Inconel 690.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 10, p. 2218, doi. 10.1007/s11837-018-2818-z

By:

Bullens, Alexander L.;
Jaye, Elizabeth H.;
Vas, Nathaniel L.;
Wharry, Janelle P.;
Bautista, Esteban;
Cain, Nathan B.;
Mao, Keyou;
Gandy, David W.

Publication type:

Article

Effect of Minor Titanium Addition on Copper/Diamond Composites Prepared by Hot Forging.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2018, v. 70, n. 10, p. 2243, doi. 10.1007/s11837-018-2815-2

By:

Yang, Fei;
Sun, Wei;
Singh, Ajit;
Bolzoni, Leandro

Publication type:

Article

Applying group technology to the forging industry.

Published in:

Production Planning & Control, 2014, v. 25, n. 2, p. 134, doi. 10.1080/09537287.2013.782948

By:

Hung, Kuo-Ting;
Maleki, Hamed

Publication type:

Article

Static strength test with as-forged control-arm in automobile with Mg-Al-Sn-Zn alloy.

Published in:

Journal of Mechanical Science & Technology, 2016, v. 30, n. 8, p. 3793, doi. 10.1007/s12206-016-0741-1

By:

Lee, S.;
Lee, J.;
Park, S.;
Yoon, J.

Publication type:

Article

A study of pressureless microwave sintering, microwave-assisted hot press sintering and conventional hot pressing on properties of aluminium/alumina nanocomposite.

Published in:

Journal of Mechanical Science & Technology, 2016, v. 30, n. 5, p. 1967, doi. 10.1007/s12206-016-0402-4

By:

Abedinzadeh, Reza;
Safavi, Seyed;
Karimzadeh, Fathallah

Publication type:

Article