Works about FLY ash

Results: 5000

Physical properties and material characterisation of fly ash-based geopolymer composites having nano silica and micro glass.

Published in:

European Journal of Environmental & Civil Engineering, 2025, v. 29, n. 10, p. 2077, doi. 10.1080/19648189.2025.2474577

By:

Elhadi, Khaled Mohamed;
Raza, Ali;
Ghazouani, Nejib;
Khan, Dawood

Publication type:

Article

Strength characteristics of expansive soil stabilized with optimized binder containing fly ash and bagasse ash.

Published in:

European Journal of Environmental & Civil Engineering, 2025, v. 29, n. 10, p. 2009, doi. 10.1080/19648189.2025.2472994

By:

Shukla, Nitin Kumar;
Sharma, Anil Kumar

Publication type:

Article

Compaction grouting: rheological and fresh-state performances of nano-silica and fly ash.

Published in:

European Journal of Environmental & Civil Engineering, 2025, v. 29, n. 10, p. 1987, doi. 10.1080/19648189.2025.2472993

By:

Güllü, Hamza;
Yetim, Mehmet Emin;
Bacak Güllü, Elif

Publication type:

Article

Influence of corrosion on bond strength in reinforced recycled aggregate concrete with fly ash.

Published in:

European Journal of Environmental & Civil Engineering, 2025, v. 29, n. 10, p. 1953, doi. 10.1080/19648189.2025.2472055

By:

Sathe, Sandeep;
Devsale, Abhishek

Publication type:

Article

Estimation of compressive strength of ultra-high performance lightweight concrete (UHPLC) using neural network.

Published in:

PLoS ONE, 2025, v. 20, n. 7, p. 1, doi. 10.1371/journal.pone.0326652

By:

Zhao, Yan;
Huang, Ziyan;
Zhao, Huilong;
Xu, Zhen;
Chang, Wei;
Liu, Bai

Publication type:

Article

Engineering properties and applicability of a novel alkali-activated industrial waste-based backfilling grouts in shield tunnels.

Published in:

Journal of Sustainable Cement-Based Materials, 2025, v. 14, n. 8, p. 1601, doi. 10.1080/21650373.2025.2515500

By:

Liu, Chenhui;
Li, Weitong;
Pang, Jingjing;
Liu, Zonghui;
Mei, Guoxiong;
Bezuijen, Adam;
Cachim, Paulo

Publication type:

Article

リサイクル資材の環境安全性確保に用いる迅速溶出試験法の開発－品質工学パラメータ設計手法を利用した精度向上－.

Published in:

Journal of Groundwater Hydrology, 2021, v. 63, n. 2, p. 67

By:

安池慎治;
正木浩幸

Publication type:

Article

纳米C-S-H晶种对四元胶凝材料体系的增强作用.

Published in:

Journal of Railway Science & Engineering, 2025, v. 22, n. 6, p. 2638, doi. 10.19713/j.cnki.43-1423/u.T20250170

By:

刘晓飞;
尹健;
李思娇;
仉文岗;
薄其航;
陈怡豪;
何帅

Publication type:

Article

偏高岭土与粉煤灰对水泥基锚固注浆材料性能的影响.

Published in:

Coal Geology & Exploration, 2025, v. 53, n. 6, p. 223, doi. 10.12363/issn.1001-1986.25.03.0214

By:

程致远;
杨俊鹏;
薛炜;
韦代东;
汪益敏

Publication type:

Article

Integrated Neural Network Analysis of Machining Characteristics in Dry‐Turned Al7075/FA0.9SiC0.9 Hybrid Composite Using PCD Inserts.

Published in:

Journal of Engineering (2314-4912), 2025, v. 2025, p. 1, doi. 10.1155/je/8816146

By:

Setia, Sunil;
Singh, Jarnail;
Chauhan, Sant Ram;
Rachchh, Nikunj;
Kumar, Raman;
Bhowmik, Abhijit;
La Foresta, Fabio

Publication type:

Article

Assessing durabilty in geopolymer composites with brick powder and recycled concrete aggregate.

Published in:

Sigma: Journal of Engineering & Natural Sciences / Mühendislik ve Fen Bilimleri Dergisi, 2025, v. 43, n. 3, p. 777, doi. 10.14744/sigma.2025.00071

By:

AYGUN, Beyza Fahriye;
AKTURK, Birkan;
UYSAL, Mucteba;
BOUTKHIL, Hanane

Publication type:

Article

Mineralogical examination of biomass ashes: a preliminary study for potassium enrichment and phosphoric acid (H3PO4) production.

Published in:

Bulletin of the Mineral Research & Exploration, 2025, v. 176, n. 176, p. 57, doi. 10.19111/bulletinofmre.1555249

By:

ÇÖTELİ, Mehmet;
ALBAYRAK, Mustafa;
KİBAR, Ufuk;
YAVUZ, Arzu;
TURGUT, Gülsüm;
KARAHAN, Duran Serdar

Publication type:

Article

Influence of treatment and fly ash fillers on the mechanical and tribological properties of banana fiber epoxy composites: experimental and ANN-RSM modeling.

Published in:

Composite Interfaces, 2025, v. 32, n. 7, p. 953, doi. 10.1080/09276440.2024.2448879

By:

Sengottaiyan, Saravanakumar;
Sathiyamurthy, S.;
Selvakumar, G.;
Haridass, R.

Publication type:

Article

Mechanical Properties of Lytag Concrete Reinforced with Hybrid Fibers.

Published in:

Engineering Letters, 2025, v. 33, n. 7, p. 2733

By:

Ming Zhang;
Jiahua Jing;
Shike Zhang

Publication type:

Article

A study on fracture energy of notched plain blended cement concrete beams with notch at varying positions.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 6, p. 438, doi. 10.12913/22998624/203485

By:

Gokak, Varsha;
Vishwanath, K. G.

Publication type:

Article

Harnessing waste-to-energy potential from plastic waste co-incineration.

Published in:

Advances in Science & Technology Research Journal, 2025, v. 19, n. 5, p. 232, doi. 10.12913/22998624/201347

By:

Kijo-Kleczkowska, Agnieszka;
Gnatowski, Adam;
Krzywanski, Jaroslaw;
Kwiatkowski, Dariusz;
Iliev, Iliya;
Beloev, Ivan;
Shahzad, Muhammad Wakil;
Tariq, Rasikh

Publication type:

Article

The effect of real curing temperatures on early age concrete strength development in massive concrete structures.

Published in:

European Journal of Environmental & Civil Engineering, 2025, v. 29, n. 9, p. 1832, doi. 10.1080/19648189.2025.2458294

By:

Al-Gburi, Majid;
Abed, Jasim;
Almssad, Asaad;
Alhayani, A. A.;
Jędrzejewska, Agnieszka;
Nilsson, Martin

Publication type:

Article

A comprehensive study on sustainable development of pavement quality concrete utilising fly-ash and copper slag.

Published in:

European Journal of Environmental & Civil Engineering, 2025, v. 29, n. 9, p. 1743, doi. 10.1080/19648189.2025.2453016

By:

Chandra Pal, Abinash;
Panda, Mahabir;
Bhuyan, Prasanta Kumar

Publication type:

Article

Research on advanced grouting curtain technology for water interception and control at the source of aquifer in coal seam roof.

Published in:

Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-06694-3

By:

Zhaoxing, Liu;
Shuning, Dong;
Shitian, Zheng;
Zhiyuan, Shi

Publication type:

Article

Parameter optimization for fly ash geopolymer mixtures: molarity, silica modulus, and solution/binder influence.

Published in:

Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-06076-9

By:

de Matos Riscado, Ana Laura Lopes;
Vieira, Carlos Maurício Fontes;
Monteiro, Sergio Neves;
de Azevedo, Afonso Rangel Garcez;
Marvila, Markssuel Teixeira

Publication type:

Article

Modification of the Adsorption Capacity of Brick Industry Fly Ash for the Removal of Cd(II).

Published in:

Solids (2673-6497), 2025, v. 6, n. 2, p. 18, doi. 10.3390/solids6020018

By:

Pérez-Chauca, León Fernando;
Castañeda-Pérez, Luz Genara;
Carrasco-Venegas, Luis Américo;
Quispe-Cisneros, Juan Luis;
Torres-Garay, Alfredo;
González-Fernández, José Vulfrano

Publication type:

Article

Fe 3 O 4 /SiO 2 Nanocomposite Derived from Coal Fly Ash and Acid Mine Drainage for the Adsorptive Removal of Diclofenac in Wastewater.

Published in:

Recycling (MDPI AG), 2025, v. 10, n. 3, p. 99, doi. 10.3390/recycling10030099

By:

Mabu, Dance;
Waleng, Ngwako Joseas;
Munonde, Tshimangadzo S.;
Nqombolo, Azile;
Nomngongo, Philiswa Nosizo

Publication type:

Article

The Use of Perlite and Rhyolite in Concrete Mix Design: Influence on Physical-Mechanical and Environmental Performance.

Published in:

Technologies (2227-7080), 2025, v. 13, n. 6, p. 224, doi. 10.3390/technologies13060224

By:

Concu, Giovanna;
Zucca, Marco;
Stochino, Flavio;
Valdes, Monica;
Maltinti, Francesca

Publication type:

Article

From Solid Waste to Technosols: Evaluation of Aggregate Stability, Microbial Community and Biotoxicity.

Published in:

Sustainability (2071-1050), 2025, v. 17, n. 12, p. 5393, doi. 10.3390/su17125393

By:

Ge, Chenglong;
Zhang, Denghui;
He, Jinhao;
Huo, Yueshuai;
Jiang, Lei;
Zhang, Xuan

Publication type:

Article

Assessment of the Efficiency of Mechanical Grinding and Calcination Processes for Construction and Demolition Waste as Binder Replacement in Cement Pastes: Mechanical Properties Evaluation.

Published in:

Sustainability (2071-1050), 2025, v. 17, n. 12, p. 5248, doi. 10.3390/su17125248

By:

Cunha, Sandra;
Kaptan, Kubilay;
Hardy, Erwan;
Aguiar, José

Publication type:

Article

Dispersed PM 10 Microspheres from Coal Fly Ash: Fine Fraction Separation, Characterisation, and Glass–Ceramic Preparation.

Published in:

Molecules, 2025, v. 30, n. 12, p. 2600, doi. 10.3390/molecules30122600

By:

Fomenko, Elena V.;
Akimochkina, Galina V.;
Anshits, Natalia N.

Publication type:

Article

Antimony Recovery from Industrial Residues—Emphasis on Leaching: A Review.

Published in:

Separations (2297-8739), 2025, v. 12, n. 6, p. 156, doi. 10.3390/separations12060156

By:

Panayotova, Marinela;
Pysmennyi, Serhii;
Panayotov, Vladko

Publication type:

Article

Effect of Vortex Finder Wall Thickness on Internal Flow Field and Classification Performance in a Hydrocyclone.

Published in:

Separations (2297-8739), 2025, v. 12, n. 6, p. 149, doi. 10.3390/separations12060149

By:

Wu, Zaihai;
Liang, Zhitao;
Li, Peiyang;
Li, Feng;
Yang, Huanbo

Publication type:

Article

Development and Mechanical Analysis of Geopolymers Formed with Mining Residue and Fly Ash from Municipal Solid Waste Incineration Obtained After the Neutralisation Stage.

Published in:

Polymers (20734360), 2025, v. 17, n. 12, p. 1704, doi. 10.3390/polym17121704

By:

Terrones-Saeta, Antonia;
Terrones-Saeta, Juan María;
Suárez-Macías, Jorge;
Iglesias-Godino, Francisco Javier;
Corpas-Iglesias, Francisco Antonio

Publication type:

Article

Dynamic Compressive Behavior and Fracture Mechanisms of Binary Mineral Admixture-Modified Concrete.

Published in:

Materials (1996-1944), 2025, v. 18, n. 12, p. 2883, doi. 10.3390/ma18122883

By:

Bu, Jianqing;
Liu, Qin;
Zhang, Longwei;
Li, Shujie;
Zhang, Liping

Publication type:

Article

Geopolymer Modified with Insoluble Calcite and Various Silica Fumes Originated from Different Manufacturing Processes.

Published in:

Materials (1996-1944), 2025, v. 18, n. 12, p. 2795, doi. 10.3390/ma18122795

By:

Xu, Yong;
Wang, Xiaonan;
Yang, Lilin;
Liu, Yang;
Gao, Tong;
Li, Han;
Wang, Yukai;
Xie, Ning;
Meng, Jing;
Ou, Jinping;
Wang, Wenshou

Publication type:

Article

The Effect of Colloidal Nano-Silica on the Initial Hydration of High-Volume Fly Ash Cement.

Published in:

Materials (1996-1944), 2025, v. 18, n. 12, p. 2769, doi. 10.3390/ma18122769

By:

Choi, Young-Cheol

Publication type:

Article

A Performance Evaluation of Fly Ash–Plastic Aggregate in Hydraulic Backfilling: A Comparative Study.

Published in:

Materials (1996-1944), 2025, v. 18, n. 12, p. 2751, doi. 10.3390/ma18122751

By:

Manohar, Munipala;
Choudhary, Bhanwar Singh;
Skrzypkowski, Krzysztof;
Zagórski, Krzysztof;
Zagórska, Anna

Publication type:

Article

Synergistic Enhancement of Physicomechanical Performance and Microstructural Integrity in Hydrothermally Synthesized Autoclaved Lightweight Aggregates Through Quicklime–Fly Ash Blends.

Published in:

Materials (1996-1944), 2025, v. 18, n. 12, p. 2739, doi. 10.3390/ma18122739

By:

Chen, Xue-Fei;
Zhang, Xiu-Cheng;
Peng, Ying

Publication type:

Article

Production and Evaluation of Lime Fertilizers with the Addition of Biomass Combustion Waste.

Published in:

Materials (1996-1944), 2025, v. 18, n. 12, p. 2732, doi. 10.3390/ma18122732

By:

Obidziński, Sławomir;
Cwalina, Paweł;
Sienkiewicz, Aneta;
Kowczyk-Sadowy, Małgorzata;
Piekut, Jolanta;
Mazur, Jacek;
Panasewicz, Michał

Publication type:

Article

Artificial Intelligence Approach for Predicting Compressive Strength of Geopolymer Concrete.

Published in:

ACI Materials Journal, 2025, v. 122, n. 3, p. 51, doi. 10.14359/51746714

By:

Naveed, Muhammad;
Hameed, Asif;
Rasool, Ali Murtaza;
Hameed, Rashid;
Mukhtar, Danish

Publication type:

Article

Chloride Adsorption of Cement Hydrates Combined with Chemical Evolution of Pore Solution.

Published in:

ACI Materials Journal, 2024, v. 121, n. 5, p. 52, doi. 10.14359/51742037

By:

In-Seok Yoon;
Tatsuhiko Saeki

Publication type:

Article

Study on Pore Characteristics of Microfoam Concrete Based on Different Mixing Ratios.

Published in:

ACI Materials Journal, 2024, v. 121, n. 4, p. 17

By:

Jin, C.;
Jiang, N.;
Li, H.;
Liu, C.;
Cao, A.;
Wang, J.;
Wen, X.

Publication type:

Article

Chemical Detection of Expansion Susceptibility of Concrete.

Published in:

ACI Materials Journal, 2024, v. 121, n. 2/3, p. 141, doi. 10.14359/51740374

By:

Lichtenwalner, Ronald;
Taylor, Joseph T.

Publication type:

Article

High-Volume Fly Ash Engineered Cementitious Composite for Underground and Hydraulic Engineering.

Published in:

ACI Materials Journal, 2024, v. 121, n. 1, p. 55, doi. 10.14359/51739200

By:

Xiaoqin Li;
Li Zhang;
Wenlu Wen;
Shihua Li;
Xu Zhou

Publication type:

Article

Long-Term Creep and Shrinkage of Alkali-Activated Concrete Incorporating Fly Ash and Rice Husk Ash.

Published in:

ACI Materials Journal, 2023, v. 120, n. 5, p. 67, doi. 10.14359/51738891

By:

Fernando, S.;
Gunasekara, C.;
Law, D. W.;
Nasvi, M. C. M.;
Setunge, S.;
Dissanayake, R.

Publication type:

Article

Effect of Polyphosphates on Properties of Alkali-Activated Slag/Fly Ash Concrete.

Published in:

ACI Materials Journal, 2023, v. 120, n. 2, p. 65, doi. 10.14359/51738460

By:

Mosleh, Youssef A.;
Gharieb, Mahmoud;
Rashad, Alaa M.

Publication type:

Article

Role of High-Volume Mineral Admixtures on Characteristics of Engineered Cementitious Composites.

Published in:

ACI Materials Journal, 2023, v. 120, n. 1, p. 193, doi. 10.14359/51737292

By:

Adesina, Adeyemi;
Das, Sreekanta

Publication type:

Article

Ecological and Mechanical Performances of Ultra-High-Performance Fiber-Reinforced Cementitious Composite Containing Fly Ash.

Published in:

ACI Materials Journal, 2023, v. 120, n. 1, p. 5, doi. 10.14359/51737330

By:

Fantilli, Alessandro P.;
Nishiwaki, Tomoya

Publication type:

Article

Service-Life Design of Low-Carbon Concrete Containing Fly Ash and Slag under Marine Tidal Conditions.

Published in:

ACI Materials Journal, 2022, v. 119, n. 6, p. 149, doi. 10.14359/51737226

By:

Sirivivatnanon, Vute;
Caihong Xue;
Khatri, Radhe

Publication type:

Article

Experimental Study on Activation Energy of Typical Hydraulic Concrete.

Published in:

ACI Materials Journal, 2022, v. 119, n. 6, p. 35, doi. 10.14359/51737194

By:

Yaoying Huang;
Yong Zhou;
Shifa Xia;
Xiaofeng Xu

Publication type:

Article

Percolation Time and Rigidification Rate of Cementitious Suspensions.

Published in:

ACI Materials Journal, 2022, v. 119, n. 5, p. 281, doi. 10.14359/51735982

By:

Moorthi, P. V. P.;
Mio, Francesco Pra;
Nanthagopalan, Prakash;
Ferrara, Liberato

Publication type:

Article

Quantifying Impact of Internally Cured Concrete on Duration of External Curing.

Published in:

ACI Materials Journal, 2022, v. 119, n. 5, p. 269, doi. 10.14359/51735980

By:

Bouchelil, L.;
Ghantous, R. M.;
Clark, G.;
Goodwin, M. N.;
Weiss, W. J.;
Moradllo, M. Khanzadeh

Publication type:

Article

Stable Time for Concrete Gas Permeability in Natural Tidal Environment.

Published in:

ACI Materials Journal, 2022, v. 119, n. 5, p. 213, doi. 10.14359/51735956

By:

Yun Zhang;
Meng Wang;
Chen-Lu Fu;
Yan-Hong Gao;
Yu-Rong Zhang

Publication type:

Article

Long-Term Mechanical Properties of Blended Fly Ash-Rice Husk Ash Alkali-Activated Concrete.

Published in:

ACI Materials Journal, 2022, v. 119, n. 5, p. 175, doi. 10.14359/51735954

By:

Fernando, S.;
Gunasekara, C.;
Law, D. W.;
Nasvi, M. C. M.;
Setunge, S.;
Dissanayake, R.;
Ismail, M. G. M. U.

Publication type:

Article