Works matching DE "FLEXURAL strength testing"

Results: 527

INVESTIGATION OF THE EFFECTS OF VARIOUS OPERATING PARAMETERS ON GEOPOLYMER MORTARS MADE FROM NATURAL MINERALS AND INDUSTRIAL WASTE MATERIALS.

Published in:

Romanian Journal of Materials / Revista Romana de Materiale, 2024, v. 54, n. 4, p. 292

By:

TEMİZER, HÜLYA;
ÇAVDAR, ÖZLEM

Publication type:

Article

LABORATORY STUDY ON THE EFFECTS OF NANO- SILICA AND METAKAOLIN AS ADDITIVES IN HIGH PERFORMANCE CONCRETE AND SUPER ABSORBENT POLYMER (SAP) AS AN INTERNAL CURING AGENT.

Published in:

Romanian Journal of Materials / Revista Romana de Materiale, 2024, v. 54, n. 4, p. 269

By:

LAKSHMI, R.;
KATHIRVEL, P.;
PRASANNAN, D.;
SAKTHIVEL, E.

Publication type:

Article

纳米 SiO<sub>2</sub> 复合碳化全再生骨料混凝土力学特性及强化机制.

Published in:

Acta Materiae Compositae Sinica, 2025, v. 42, n. 4, p. 2102, doi. 10.13801/j.cnki.fhclxb.20240522.007

By:

张美香;
丁亚红;
杨小林;
孙博

Publication type:

Article

Development of sustainable sandcrete bricks using industrial and agricultural waste.

Published in:

Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-02308-0

By:

Olaiya, Bamidele Charles;
Lawan, Mustapha Muhammad;
Olonade, Kolawole Adisa;
Abubakar, Sani Aliyu

Publication type:

Article

The Potential of Wood Ash to Be Used as a Supplementary Cementitious Material in Cement Mortars.

Published in:

Buildings (2075-5309), 2025, v. 15, n. 9, p. 1507, doi. 10.3390/buildings15091507

By:

Lescinskis, Oskars;
Sapata, Alise;
Bumanis, Girts;
Sinka, Maris;
Zhou, Xiangming;
Bajare, Diana

Publication type:

Article

Mechanical and Ultrasonic Evaluation of Epoxy-Based Polymer Mortar Reinforced with Discrete Fibers.

Published in:

Polymers (20734360), 2025, v. 17, n. 9, p. 1250, doi. 10.3390/polym17091250

By:

Alsuhaibani, Eyad

Publication type:

Article

Clinical Adjustment of Zirconia-Reinforced Lithium Silicate and Lithium Disilicate Restorations Should Be Performed Before Crystallization.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 1944, doi. 10.3390/ma18091944

By:

Baroudi, Kusai;
Almeida, Nathália Ribeiro de;
de Abreu, Laura Salerno;
Wandscher, Vinícius Felipe;
Ramos, Nathalia de Carvalho;
Padmanabhan, Vivek;
Bucholz, Caroline Andrade;
Amaral, Marina

Publication type:

Article

Effect of Adding Steel and Glass Fibers on the Mechanical Properties and the Thickness of Rigid Concrete Pavements.

Published in:

Journal of Engineering (17264073), 2025, v. 31, n. 5, p. 172, doi. 10.31026/j.eng.2025.05.10

By:

Abduljawad, Mahmood G.;
Albayati, Amjad H.

Publication type:

Article

Interlaminar bonding assessment in vertical-oriented filament material extrusion bending specimens.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 11, p. 4977, doi. 10.1007/s00170-025-15124-7

By:

Kechagias, John D.;
Fountas, Nikolaos A.;
Papantoniou, Ioannis;
Vaxevanidis, Nikolaos M.

Publication type:

Article

Bio-inspired optimisation design strategy of graded hemp core for hybrid carbon/hemp sandwich laminates.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 5/6, p. 2811, doi. 10.1007/s00170-024-14604-6

By:

Boccarusso, Luca;
De Fazio, Dario;
Myronidis, Konstantinos;
Durante, Massimo;
Pinto, Fulvio

Publication type:

Article

Comparison of reinforcement fibers in 3D printing mortars using multi-criteria analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 3/4, p. 1463, doi. 10.1007/s00170-024-14126-1

By:

Alonso-Cañon, Sara;
Blanco-Fernandez, Elena;
Castro-Fresno, Daniel;
Yoris-Nobile, Adrian I.;
Castanon-Jano, Laura

Publication type:

Article

Enhancement of flexural strength of glass-nylon fibre hybrid composites using alumina nano filler.

Published in:

Materials Research Innovations, 2021, v. 25, n. 6, p. 338, doi. 10.1080/14328917.2020.1816368

By:

Kumar K, Dilip;
M, Shantharaja

Publication type:

Article

Effects of post‐polymerization conditions on color properties, surface roughness, and flexural strength of 3D‐printed permanent resin material after thermal aging.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2025, v. 34, n. 3, p. 298, doi. 10.1111/jopr.13818

By:

Baytur, Simge;
Diken Turksayar, Almira Ada

Publication type:

Article

Biaxial flexural strength of different provisional restorative materials under chemo‐mechanical aging: An in vitro study.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2024, v. 33, n. 2, p. 149, doi. 10.1111/jopr.13662

By:

Sadek, Hoda M. Abdel;
El‐Banna, Ahmed

Publication type:

Article

Qualitative SEM analysis of fracture surfaces for dental ceramics and polymers broken by flexural strength testing and crown compression.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2023, v. 32, n. 5, p. 100, doi. 10.1111/jopr.13659

By:

Alghazzawi, Tariq F.;
Janowski, Gregg M.;
Ning, Haibin;
Eberhardt, Alan W.

Publication type:

Article

Effect of Thermal Cycling on the Flexural Strength and Hardness of New‐Generation Denture Base Materials.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2023, v. 32, p. 81, doi. 10.1111/jopr.13615

By:

Çakmak, Gülce;
Donmez, Mustafa Borga;
Akay, Canan;
Abou‐Ayash, Samir;
Schimmel, Martin;
Yilmaz, Burak

Publication type:

Article

Effect of Printing Orientation and Postcuring Time on the Flexural Strength of 3D‐Printed Resins.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2023, v. 32, p. 45, doi. 10.1111/jopr.13572

By:

Al‐Dulaijan, Yousif A.;
Alsulaimi, Leenah;
Alotaibi, Reema;
Alboainain, Areej;
Akhtar, Sultan;
Khan, Soban Q.;
Al‐Ghamdi, Maram;
Gad, Mohammed M

Publication type:

Article

Polymethylmethacrylate Denture Base Layering as a New Approach for the Addition of Antifungal Agents.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2023, v. 32, n. 4, p. 298, doi. 10.1111/jopr.13561

By:

AlQahtani, Ghaida M.;
AlSuhail, Haneen S.;
Alqater, Norah K.;
AlTaisan, Sarah A.;
Akhtar, Sultan;
Khan, Soban Q.;
Gad, Mohammed M.

Publication type:

Article

The Flexural Strength and Flexural Modulus of Stereolithography Additively Manufactured Zirconia with Different Porosities.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2022, v. 31, n. 5, p. 434, doi. 10.1111/jopr.13430

By:

Zandinejad, Amirali;
Das, Omprakash;
Barmak, Abdul Basir;
Kuttolamadom, Mathew;
Revilla‐León, Marta

Publication type:

Article

Closed Repair Technique: Innovative Surface Design for Polymethylmethacrylate Denture Base Repair.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2022, v. 31, n. 3, p. 257, doi. 10.1111/jopr.13412

By:

Gad, Mohammed M.;
Rahoma, Ahmed;
Khan, Zahid A.;
Al‐Thobity, Ahmad M.;
Abualsaud, Reem;
Alkaltham, Nora;
Akhtar, Sultan;
Ateeq, Ijlal Shahrukh;
Al‐Harbi, Fahad A.

Publication type:

Article

Comparison of Mechanical Properties of 3D‐Printed, CAD/CAM, and Conventional Denture Base Materials.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2020, v. 29, n. 6, p. 524, doi. 10.1111/jopr.13175

By:

Prpić, Vladimir;
Schauperl, Zdravko;
Ćatić, Amir;
Dulčić, Nikša;
Čimić, Samir

Publication type:

Article

Flexural and Surface Properties of PMMA Denture Base Material Modified with Thymoquinone as an Antifungal Agent.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2020, v. 29, n. 3, p. 243, doi. 10.1111/jopr.12967

By:

Gad, Mohammed M.;
Al‐Thobity, Ahmad M.;
Fouda, Shaimaa M.;
Näpänkangas, Ritva;
Raustia, Aune

Publication type:

Article

Investigating the Effect of Different Surface Treatments on Vickers Hardness and Flexural Strength of Zirconium and Lithium Disilicate Ceramics.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2020, v. 29, n. 2, p. 129, doi. 10.1111/jopr.12939

By:

Ozdogan, Alper;
Yesil Duymus, Zeynep

Publication type:

Article

Effect of Zirconia Core Thickness and Veneer Firing Cycle on the Biaxial Flexural Strength of Veneering Ceramic.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2020, v. 29, n. 1, p. 26, doi. 10.1111/jopr.12929

By:

Alayad, Abdullah Saeed

Publication type:

Article

Microstructural and Mechanical Characterization of CAD/CAM Materials for Monolithic Dental Restorations.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2019, v. 28, n. 2, p. e587, doi. 10.1111/jopr.12964

By:

Furtado de Mendonca, Arthur;
Shahmoradi, Mahdi;
Gouvêa, Cresus Vinicius Depes de;
Souza, Grace M.;
Ellakwa, Ayman

Publication type:

Article

Contrast Ratio of Six Zirconia-Based Dental Ceramics.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2014, v. 23, n. 6, p. 456, doi. 10.1111/jopr.12143

By:

Kanchanavasita, Widchaya;
Triwatana, Premwara;
Suputtamongkol, Kallaya;
Thanapitak, Alisa;
Chatchaiganan, Mathura

Publication type:

Article

Numerical investigation on the nonlinear flexural behaviour of wrapped glass/epoxy laminated composite panel and experimental validation.

Published in:

Archive of Applied Mechanics, 2017, v. 87, n. 2, p. 315, doi. 10.1007/s00419-016-1195-8

By:

Sahoo, Sushree;
Panda, Subrata;
Singh, Vijay;
Mahapatra, Trupti

Publication type:

Article

矿物掺合料对预应力孔道压浆材料力学性能影响研究.

Published in:

Fly Ash Comprehensive Utilization, 2023, v. 37, n. 4, p. 80, doi. 10.19860/j.cnki.issn1005-8249.2023.04.014

By:

范杰林

Publication type:

Article

Experimental Study of the Mechanical Properties of Geopolymeric Mortars Containing Slag, Kaolin Powder, and Polymer.

Published in:

Ferdowsi Civil Engineering, 2024, v. 37, n. 2, p. 25, doi. 10.22067/jfcei.2024.79313.1185

By:

Ghasemzadeh Mousavinejad, Seyed Hosein;
Darvishalinezhad, Arian

Publication type:

Article

纳米二氧化硅与钢纤维对再生混凝土力学性能的影响.

Published in:

Journal of Wuhan University of Science & Technology, 2025, v. 48, n. 2, p. 121, doi. 10.3969/j.issn.1674-3644.2025.02.005

By:

王俊波;
申贺文;
王永贵;
黄旭阳

Publication type:

Article

SELF FIBER COMPACTING CONCRETE (SFCC) PROPERTIES INCORPRATED WITH SILICA FUME AND FIBER.

Published in:

Civil Engineering Journal, 2020, n. 1, p. 52, doi. 10.14311/CEJ.2020.01.0005

By:

Prayuda, Hakas;
Monika, Fanny;
Cahyati, Martyana Dwi;
Saleh, Fadillawaty

Publication type:

Article

W/C REDUCTION FOR FLEXURAL STRENGTHENING OF R.C BEAMS HAVING PLASTIC AGGREGATE.

Published in:

Civil Engineering Journal, 2019, n. 2, p. 260, doi. 10.14311/CEJ.2019.02.0021

By:

Gul, Akhtar;
Tayyab, Saad;
Ullah, Asad;
Shah, Kamal;
Mehmood, Faisal;
Haq, Fazal

Publication type:

Article

Mechanical properties of concrete using different types of recycled plastic as an aggregate replacement.

Published in:

Cogent Engineering, 2023, v. 10, n. 1, p. 1, doi. 10.1080/23311916.2023.2243735

By:

Shukur, Mohammed H.;
Ibrahim, Kaythar A.;
Al-Darzi, Suhaib Yahya;
Salih, Oday Asal

Publication type:

Article

Durability prediction analysis on mechanical properties of GFRP upon immersion in water at ambient temperature.

Published in:

Cogent Engineering, 2021, v. 8, n. 1, p. 1, doi. 10.1080/23311916.2021.1956869

By:

Kowshik, Suhas;
M C, Gowrishankar;
Shettar, Manjunath;
Bhat, Ritesh;
B M, Gurumurthy

Publication type:

Article

Detecting crack on-set time in mortar prisms with a thermal image.

Published in:

Nondestructive Testing & Evaluation, 2023, v. 38, n. 2, p. 313, doi. 10.1080/10589759.2022.2121395

By:

Park, Jong-Gun;
Heo, Gwanghee;
Kim, Jung;
Venkel, Tetiana;
Son, Jung-Young

Publication type:

Article

Impact of Waste Iron Slag on Mechanical and Durability Properties of Concrete.

Published in:

Jordan Journal of Civil Engineering, 2023, v. 17, n. 1, p. 45, doi. 10.14525/JJCE.v17i1.05

By:

Jain, Kishan Lal;
Sharma, Dinesh Kumar;
Choudhary, Rakesh;
Bhargava, Shruti

Publication type:

Article

Effect of core hybridization on the mechanical performance of sandwich composites.

Published in:

Journal of Industrial Textiles, 2025, p. 1, doi. 10.1177/15280837251321137

By:

Dalfi, Hussein Kommur;
Al-Obaidi, Anwer

Publication type:

Article

Studying the influence of micro-particles on the mechanical performance and damage failures of composite laminates.

Published in:

Journal of Industrial Textiles, 2024, p. 1, doi. 10.1177/15280837241275018

By:

Dalfi, Hussein Kommur;
Alomarah, Amer;
Al-Obaidi, Anwer

Publication type:

Article

Analysis of Topography, Flexural Strength, and Microstructure of a Lithium Disilicate Glass-Ceramic After Surface Finishing.

Published in:

International Journal of Prosthodontics, 2024, v. 37, n. 4, p. 439, doi. 10.11607/ijp.8352

By:

Furini, Giordana Picolo;
Pecho, Oscar E.;
Álvarez-Lloret, Pedro;
Benetti, Paula

Publication type:

Article

Influence of Surface Treatment on the Physical Properties and Biofilm Formation of Zirconia-Reinforced Lithium Silicate Ceramics: In Vitro Trial.

Published in:

International Journal of Prosthodontics, 2023, v. 36, n. 4, p. 460, doi. 10.11607/ijp.7192

By:

Nishitani Shibasaki, Patricia Akemi;
Cavalli, Vanessa;
Cardoso Oliveira, Mateus;
Priscila Barbosa, Janaina;
Gomes Boriollo, Marcelo Fabiano;
Marcondes Martins, Luis Roberto

Publication type:

Article

Finite Element Analysis of Occlusal Interferences in Dental Prosthetics Caused by Occlusal Adjustment.

Published in:

International Journal of Prosthodontics, 2023, v. 36, n. 4, p. 436, doi. 10.11607/ijp.7178

By:

Schmid, Alois;
Strasser, Thomas;
Rosentritt, Martin

Publication type:

Article

ANALYSIS OF SELF-COMPACTED CONCRETE USING FLY ASH AND SILICA AS PARTIAL CEMENT REPLACEMENTS.

Published in:

Romanian Journal of Materials / Revista Romana de Materiale, 2021, v. 51, n. 4, p. 572

By:

HAMEED, ASIF;
QURESHI, MOHSIN USMAN;
RASOOL, ALI MURTAZA;
KHALID, JAVAID;
QAZI, ASADULLAH;
RASHID, MUHAMMAD USMAN;
MAHMOOD, ZAFAR

Publication type:

Article

DETERMINATION OF COLOR HOMOGENEITY BY IMAGE PROCESSING IN CEMENT BASED MORTARS.

Published in:

Romanian Journal of Materials / Revista Romana de Materiale, 2021, v. 51, n. 4, p. 552

By:

ÇOMAK, BEKİR;
BİDECİ, ALPER;
AYKANAT, BATUHAN;
BİDECİ, ÖZLEM SALLI

Publication type:

Article

NUMERICAL AND EXPERIMENTAL STUDY OF SEMI-DESTRUCTIVE TESTS TO EVALUATE THE COMPRESSIVE AND FLEXURAL STRENGTH OF POLYMER-MODIFIED MORTARS AND THEIR ADHESION TO THE CONCRETE SUBSTRATE.

Published in:

Romanian Journal of Materials / Revista Romana de Materiale, 2020, v. 50, n. 4, p. 537

By:

VARZANEH, ALI SABERI;
NADERI, MAHMOOD

Publication type:

Article

EFFECT OF FLY ASH AND METAKAOLIN ON THE STRENGTH AND STABILITY CHARACTERISTICS OF SELF COMPACTING CONCRETE.

Published in:

Romanian Journal of Materials / Revista Romana de Materiale, 2020, v. 50, n. 4, p. 531

By:

DANYA, T. R.;
SAKTHIESWARAN, N.

Publication type:

Article

Fixation of Coal Fly Ash (CFA) in the Form of Construction Blocks with Variable Combinations of Lime and FGD Gypsum.

Published in:

Journal of the Chemical Society of Pakistan, 2024, v. 46, n. 5, p. 442, doi. 10.52568/001558/jcsp/46.05.2024

By:

Faraz, Ahmed;
Ma, Hongzhi;
Imran, Muhammad;
Hongjuan, Sun;
Li, Zeng;
Wu, Shuang;
Wang, Xuguang;
Bai, Junwei;
Shen, Kai

Publication type:

Article

Comparison of Mechanical Properties and Sensitivity of Compressive and Flexural Strength of Artificial Frozen Sand.

Published in:

Geofluids, 2022, p. 1, doi. 10.1155/2022/7419030

By:

Chen, Junhao;
Li, Han;
Lian, Lijin;
Lu, Gen

Publication type:

Article

Mechanical properties characterization of different types of masonry infill walls.

Published in:

Frontiers of Structural & Civil Engineering, 2020, v. 14, n. 2, p. 411, doi. 10.1007/s11709-019-0602-y

By:

Furtado, André;
Rodrigues, Hugo;
Arêde, António;
Varum, Humberto

Publication type:

Article

Strength and durability properties of concrete using incinerated biomedical waste ash.

Published in:

Environmental Engineering Research, 2023, v. 28, n. 2, p. 1, doi. 10.4491/eer.2022.024

By:

Katare, Kailash Narayan;
Samaiya, Nitin Kumar;
IyerMurthy, Yogesh

Publication type:

Article

Effect of magnetic water on properties of structural lightweight expanded polystyrene concrete.

Published in:

Australian Journal of Civil Engineering, 2024, v. 22, n. 1, p. 23, doi. 10.1080/14488353.2022.2114638

By:

Holakoei, Hamid Reza;
Sajedi, Fathollah

Publication type:

Article