Works about FLEXURAL strength

Results: 5000

High Strength and Toughness Epoxy Nanocomposites Reinforced With Epoxy‐Terminated Hyperbranched Polymer.

Published in:

Journal of Applied Polymer Science, 2025, v. 142, n. 25, p. 1, doi. 10.1002/app.57071

By:

Fan, Hongyu;
Sun, Tao;
Zhang, Shiji;
Wu, Zhanjun

Publication type:

Article

Effect of Yttria Percentage and Different Surface Treatments on the Flexural Strength of Zirconia Materials: An In Vitro Study.

Published in:

Journal of Contemporary Dental Practice, 2025, v. 26, n. 2, p. 184, doi. 10.5005/jp-journals-10024-3822

By:

Omar, Nagy M.;
Aldamaty, Mohamed F.;
Shokry, Tamer E.

Publication type:

Article

Waterborne Polyurethane/Nano‐SiO2 Hybrid Organic–Inorganic Sizing Agents for Enhanced Mechanical Properties of Carbon Fibers/Epoxy Composites.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 10, p. 1, doi. 10.1002/adem.202402879

By:

Sun, Jian;
Liu, Jiaxin;
Sun, Xiaojun;
Gao, Zijian;
Wang, Di;
Jin, Zhaohui;
Gao, Huajing

Publication type:

Article

Reduction in Coefficient of Thermal Expansion of Cu‐Based Self‐Lubricating Composites without Decreasing Wear Resistance by the Addition of Ni50Fe.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 10, p. 1, doi. 10.1002/adem.202402267

By:

Zhang, Ziyan;
Gao, Yi;
Cheng, Jinjuan;
Gan, Xueping;
Liu, Chaoqiang;
Zhou, Kechao

Publication type:

Article

Recovery of Plastic Waste in the Production of Industrial Sludge-Based Geopolymer Mortars.

Published in:

Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2025, v. 35, n. 2, p. 231, doi. 10.18280/rcma.350205

By:

Jeniah, Hajar;
Ammari, Mohammed;
Allal, Laïla Ben

Publication type:

Article

超低温对钢纤维增强橡胶混凝土抗弯性能的影响.

Published in:

Acta Materiae Compositae Sinica, 2025, v. 42, n. 4, p. 2010, doi. 10.13801/j.cnki.fhclxb.20240627.001

By:

苏宁玥;
郭帅成;
朱德举

Publication type:

Article

纳米 SiO2 复合碳化全再生骨料混凝土力学特性及强化机制.

Published in:

Acta Materiae Compositae Sinica, 2025, v. 42, n. 4, p. 2102, doi. 10.13801/j.cnki.fhclxb.20240522.007

By:

张美香;
丁亚红;
杨小林;
孙博

Publication type:

Article

硅灰改性钢纤维增强地聚物再生混凝土力学性能试验.

Published in:

Acta Materiae Compositae Sinica, 2025, v. 42, n. 4, p. 2090, doi. 10.13801/j.cnki.fhclxb.20240723.001

By:

夏冬桃;
常闻捷;
李彪;
吴晨;
喻诗汀;
王煜;
高奥星

Publication type:

Article

单掺/复掺碳纳米管和纳米二氧化钛硫铝酸盐水泥复合材料力学与自感知性能的影响.

Published in:

Acta Materiae Compositae Sinica, 2025, v. 42, n. 4, p. 2048, doi. 10.13801/j.cnki.fhclxb.20240611.004

By:

张立卿;
肖振荣;
许开成;
王云洋;
韩宝国

Publication type:

Article

勃姆石/石墨烯多尺度增韧改性碳纤维环氧树脂复合材料.

Published in:

Acta Materiae Compositae Sinica, 2025, v. 42, n. 4, p. 1922, doi. 10.13801/j.cnki.fhclxb.20240718.003

By:

刘蓉;
陈杰;
龚璋灏;
赵伟;
马明硕;
刘治刚

Publication type:

Article

不同形态回收碳纤维混凝土弯曲性能及微观结构.

Published in:

Acta Materiae Compositae Sinica, 2025, v. 42, n. 4, p. 2138, doi. 10.13801/j.cnki.fhclxb.20240624.002

By:

江佳正;
曹忠露;
赵轩;
杨鼎宜;
苏忠纯

Publication type:

Article

Impact of reinforcing ability of carbon fiber on the thermomechanical properties of epoxy based hybrid composites.

Published in:

Journal of Macromolecular Science: Pure & Applied Chemistry, 2025, v. 62, n. 5, p. 419, doi. 10.1080/10601325.2025.2486059

By:

Maurya, Anand;
Kumar, Pradeep;
Sinha, Shishir

Publication type:

Article

Evaluating Vegetable Oil Epoxidation Efficiency on Properties of Eucalyptus Wood: Thermal and Thermochemical Processing.

Published in:

BioResources, 2025, v. 20, n. 2, p. 4450, doi. 10.15376/biores.20.2.4450-4463

By:

Hejazi, Seyed Javad;
Abedini, Raoufeh;
Ghorbani, Maryam;
Dastoorian, Foroogh

Publication type:

Article

Physical and Bending Properties of Beech Laminated Veneer Lumber Reinforced with Carbon Fiber Fabric.

Published in:

BioResources, 2025, v. 20, n. 2, p. 4267, doi. 10.15376/biores.20.2.4267-4287

By:

Zdravković, Vladislav;
Sokolović, Neda M.;
Lovrić, Aleksandar;
Šekularac, Nenad

Publication type:

Article

Sustainable Thermal and Acoustic Insulating Panels from Recycled Cardboard.

Published in:

BioResources, 2025, v. 20, n. 2, p. 4115, doi. 10.15376/biores.20.2.4115-4135

By:

Mazaherifar, Mohammad Hassan;
Timar, Maria Cristina;
Georgescu, Sergiu Valeriu;
Cosereanu, Camelia

Publication type:

Article

Effect of Wood Species, Bark Particle Size, and Adhesive Type on the Properties of Bark-Based Boards.

Published in:

BioResources, 2025, v. 20, n. 2, p. 4044, doi. 10.15376/biores.20.2.4044-4067

By:

Nociar, Marek;
Pipíška, Tomáš;
Bekhta, Pavlo;
Král, Pavel

Publication type:

Article

EXPERIMENTAL AND ANALYTICAL INVESTIGATION OF METAKAOLIN AND QUARRY DUST IN CONCRETE.

Published in:

Suranaree Journal of Science & Technology, 2025, v. 32, n. 2, p. 1, doi. 10.55766/sujst7333

By:

Parmar, Nilesh;
B., Kondraivendhan;
Khungar, Hariom

Publication type:

Article

耐水淀粉基木材胶黏剂的制备及其性能测试.

Published in:

Chemistry & Industry of Forest Products, 2025, v. 45, n. 2, p. 133, doi. 10.20195/j.issn.0253-2417.2024021

By:

赵梦瑶;
唐亚丽;
卢立新;
丘晓琳;
潘嘹

Publication type:

Article

Physical and mechanical properties of cross-laminated timber made from Pinus tecunumanii wood.

Published in:

Revista Facultad Nacional de Agronomía Medellín, 2025, v. 78, n. 2, p. 11161, doi. 10.15446/rfnam.v78n2.114727

By:

Herrera-Builes, Jhon F.;
Sierra, Juan C.;
Parra, Rodolfo

Publication type:

Article

МЕТОДИ ЗА ИЗСЛЕДВАНЕ НА ДЪВКАТЕЛНИЯ АПАРАТ ПРИ АКТИВИРАНА ДЪВКАТЕЛНА ФУНКЦИЯ.

Published in:

Knowledge: International Journal, 2024, v. 67, n. 4, p. 549

By:

Димова-Габровск&, Мариана Йордано&;
Брусарска, Йоана Руменова;
Димитрова, Десислава;
Янакиев, Спартак Спасов

Publication type:

Article

Triethylamine-Capped Calcium Phosphate Oligomers/Polyacrylamide Synergistically Reinforced α -Hemihydrate Gypsum Composites: A Mechanistic Study on Mechanical Strengthening via Organic/Inorganic Interpenetrating Networks.

Published in:

Molecules, 2025, v. 30, n. 9, p. 2002, doi. 10.3390/molecules30092002

By:

Chen, Yuan;
Chen, Li;
Li, Hao;
Zhang, Bin;
Record, Marie-Christine;
Boulet, Pascal;
Wang, Juan;
Albina, Jan-Michael;
Yang, Yi;
Ma, Weiliang

Publication type:

Article

Bioresorbable High-Strength HA/PLLA Composites for Internal Fracture Fixation.

Published in:

Molecules, 2025, v. 30, n. 9, p. 1889, doi. 10.3390/molecules30091889

By:

Liu, Jie;
Sun, Mingtao;
He, Yipeng;
Yan, Weixia;
Yu, Muhuo;
Han, Keqing

Publication type:

Article

An Innovative Approach to Enhancing Concrete Sustainability: Utilising Unprocessed Steel Slag with Low CaO and High SiO 2 Content.

Published in:

Buildings (2075-5309), 2025, v. 15, n. 9, p. 1514, doi. 10.3390/buildings15091514

By:

Herki, Bengin M. A.;
Ali, Ali Ibrahim;
Smail, Yousif Sadiq;
Omer, Karwan Maroof

Publication type:

Article

Study on Mechanical Strength and Chloride Corrosion Resistance of Composite Mortars Mixed with Steel Slag, Bayer Red Mud, and Phosphogypsum.

Published in:

Buildings (2075-5309), 2025, v. 15, n. 9, p. 1510, doi. 10.3390/buildings15091510

By:

Hu, Cheng;
Wang, Qijie;
Xiang, Weiheng;
Zhang, Tao;
Li, Yanguang;
Chen, Ruhua

Publication type:

Article

The Potential of Wood Ash to Be Used as a Supplementary Cementitious Material in Cement Mortars.

Published in:

Buildings (2075-5309), 2025, v. 15, n. 9, p. 1507, doi. 10.3390/buildings15091507

By:

Lescinskis, Oskars;
Sapata, Alise;
Bumanis, Girts;
Sinka, Maris;
Zhou, Xiangming;
Bajare, Diana

Publication type:

Article

Laboratory Evaluation and Finite Element Modeling of SBS and Basalt Fiber Modified Mixtures.

Published in:

Applied Sciences (2076-3417), 2025, v. 15, n. 9, p. 4965, doi. 10.3390/app15094965

By:

Fahad, Mohammad;
Richard, Nagy

Publication type:

Article

Effects of Nickel and Iron Content on the Microstructures and Mechanical Properties of Cemented Carbide with Coarse and Fine-Grained Heterostructures.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 2045, doi. 10.3390/ma18092045

By:

Yang, Shuzhong;
Ye, Nan;
Zhang, Mingxian;
Zhu, Yaru;
Zhang, Chenxin;
Zhu, Wentan;
Zhang, Fan;
Jiang, Jiafa;
Tang, Jiancheng

Publication type:

Article

The Preparation and Properties of Ultra-High-Performance Concrete with Aeolian Sand: A Lab Study on the Effect of the Curing Method.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 2031, doi. 10.3390/ma18092031

By:

Lv, Yang;
Zhao, Boyu;
Zhu, Jie;
He, Chenhao;
Ge, Yunlu;
Wu, Yuanshuai;
Zhu, Yanchao;
Dan, Jianming;
Zhou, Yang;
Li, Xiangguo

Publication type:

Article

Preparation and Properties of SiC-W 2 B 5 /C Composites.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 2007, doi. 10.3390/ma18092007

By:

Xiao, Bo;
Zhang, Xia;
Hou, Yongzhao;
Wang, Fagang;
Wen, Guangwu

Publication type:

Article

Water Resistance Ability and Mechanical Strength of Eco-Friendly Particleboard Made from Bamboo Waste and Maltodextrin-Based Adhesive.

Published in:

Wood Industry / Drvna Industrija, 2025, v. 76, n. 1, p. 3, doi. 10.5552/drvind.2025.0179

By:

Dewi, Greitta Kusuma;
Widyorini, Ragil;
Aini, Erlina Nurul;
Lubis, Yunida Syafriani

Publication type:

Article

The properties of high-ductility engineered geopolymer composites developed with different design parameters.

Published in:

European Journal of Environmental & Civil Engineering, 2025, v. 29, n. 8, p. 1552, doi. 10.1080/19648189.2024.2445553

By:

Güneş, Muhammet;
Öz, Hatice Öznur;
Yücel, Hasan Erhan

Publication type:

Article

New insights on rheology, durability and mechanical and thermal properties of polyester and steel fiber-reinforced self-compacting concretes.

Published in:

European Journal of Environmental & Civil Engineering, 2025, v. 29, n. 8, p. 1467, doi. 10.1080/19648189.2024.2441970

By:

Barka, Mohammed;
Taleb, Omar;
Tedjditi, Ahmed Kamel;
Soualhi, Hamza;
Benosman, Ahmed Soufiane;
Mouli, Mohamed

Publication type:

Article

Addition of hematite as a sintering aid in alumina: effect of concentration on physical, microstructural and mechanical properties.

Published in:

Tecnologia em Metalurgia, Materiais e Mineração, 2024, v. 21, p. 1, doi. 10.4322/2176-1523.20242978

By:

Poubel Mendonça da Silveira, Pedro Henrique;
Elzubair Eltom, Amal;
Lopes dos Santos, Jheison;
Girondi Delaqua, Geovana Carla;
Fontes Vieira, Carlos Maurício;
Rodrigues de Jesus, Paulo Roberto;
Prado da Silva, Marcelo Henrique;
Vieira Gomes, Alaelson

Publication type:

Article

DETERMINING THE EFFECT OF THE AMOUNT OF POLYPROPYLENE FIBER AND PLASTICIZER ON THE STRENGTH AND ABRASION RESISTANCE OF CONCRETES FOR RIGID PAVEMENT.

Published in:

Eastern-European Journal of Enterprise Technologies, 2025, v. 2, n. 6(134), p. 53, doi. 10.15587/1729-4061.2025.322590

By:

Kroviakov, Sergii;
Finohenov, Oleh;
Ihnatenko, Andrii

Publication type:

Article

Effect of the firing temperature on the technical properties of clay ceramic added with blast furnace sludge waste.

Published in:

Ceramica, 2025, v. 71, p. 2, doi. 10.1590/BYYS6179

By:

Defanti, T. J. S. R. B.;
Faria Jr, R. T.;
Holanda, J. N. F.

Publication type:

Article

Cyclic Responses of Axially Restrained Diagonally Reinforced Coupling Beams.

Published in:

ACI Structural Journal, 2025, v. 122, n. 3, p. 105, doi. 10.14359/51744395

By:

Min-Yuan Cheng;
Ren-Jie Tsai;
Jui-Cheng Hung;
Henry, Richard S.

Publication type:

Article

Effect of SiC Particle Size on the Properties of TiSi2/SiC Composites Semiconductor Fabricated by Liquid Infiltration of Ti–Si Eutectic Alloy.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 9, p. 1, doi. 10.1002/adem.202402449

By:

Zhao, Ziyan;
Qi, Qian;
Liu, Xuejian;
Huang, Zhengren;
Liu, Yan

Publication type:

Article

Interfacial and mechanical properties of silane coupling agent interface‐modified basalt fiber reinforced thermoplastic polypropylene resin composites.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6582, doi. 10.1002/pc.29379

By:

Zhang, Zhiqiang;
Sun, Wenhao;
Huang, Weipeng;
Zhu, Yanchao;
Li, Juntao;
Liang, Ce;
Gao, Shuang

Publication type:

Article

Methacrylamide‐substituted para‐aramid as an innovative sizing agent for improving the mechanical properties of carbon fiber/vinyl ester resin composites.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6290, doi. 10.1002/pc.29360

By:

Yu, Boshi;
Zhang, Yiwei;
Liu, Yue;
Jin, Yewei;
Song, Yihu;
Peng, Mao

Publication type:

Article

Enhanced flexural and vibration behavior of interleaved CFRP composite joints with modified multiwalled carbon nanotube adhesives for aerospace and aircraft applications.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6254, doi. 10.1002/pc.29357

By:

Karthikeyan, N.;
Naveen, Jesuarockiam

Publication type:

Article

Comparative study on flexural performances of carbon fiber reinforced polymers with micro‐, micro‐/nano‐, and nano‐sized aramid fiber interlayers.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6241, doi. 10.1002/pc.29356

By:

Hu, Yunsen;
Gao, Yuxuan;
Tan, Bo;
Hu, Xiaozhi;
Zhang, Jian

Publication type:

Article

Study on mechanical performance of carbon fiber reinforced polyetherketoneketone prepreg and its composites prepared by slurry method.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6146, doi. 10.1002/pc.29348

By:

Cheng, Dongcai;
Shen, Wensi;
Chen, Yuxi;
Zhang, Weijian;
Huang, Yuexing;
He, Yuzhao;
Yu, Lichao;
Shen, Linfeng

Publication type:

Article

Effect of Adding Steel and Glass Fibers on the Mechanical Properties and the Thickness of Rigid Concrete Pavements.

Published in:

Journal of Engineering (17264073), 2025, v. 31, n. 5, p. 172, doi. 10.31026/j.eng.2025.05.10

By:

Abduljawad, Mahmood G.;
Albayati, Amjad H.

Publication type:

Article

Application of Phenolic-based BFRP Rebars Adapted to High Temperature in Beam Strengthened by NSM Technique.

Published in:

Structural Engineering International, 2025, v. 35, n. 2, p. 276, doi. 10.1080/10168664.2024.2365822

By:

Li Dr, Ting;
Liu Dr, Tie;
Jin Civ. Eng., Chao;
Huang Prof., Jinqiao

Publication type:

Article

Effect of filler-resin ratio on the physical, mechanical and durability properties of heavy aggregate-based polymer composites.

Published in:

Bulletin of Materials Science, 2025, v. 48, n. 2, p. 1, doi. 10.1007/s12034-025-03405-6

By:

POLAT, HASAN

Publication type:

Article

Investigation of wear and transverse rupture strength of AA2219/ZrO2/B4C hybrid composite materials prepared with 3D ball mixer and produced by spark plasma sintering.

Published in:

Composite Interfaces, 2025, v. 32, n. 5, p. 689, doi. 10.1080/09276440.2024.2434808

By:

Yılmaz, Taha Alper;
Taşci, Ufuk;
Gökmen, Ahmet Ufuk;
Bostan, Bülent

Publication type:

Article

Flexural and corrosion behaviour of WC-10Co-4Cr + Graphene sprayed on textured HSLA-steel.

Published in:

Surface Engineering, 2023, v. 39, n. 4, p. 457, doi. 10.1080/02670844.2023.2232970

By:

Shrivastava, Shreyansh;
Kumar, Vijay;
Verma, Rajeev;
Sharma, Varun

Publication type:

Article

Improved flexural strength of diamond/Cu–Fe composites with Cu–B–B4C coating.

Published in:

Surface Engineering, 2020, v. 36, n. 7, p. 687, doi. 10.1080/02670844.2019.1696445

By:

Bai, Hua;
Xu, Dong

Publication type:

Article

Properties of nano-SiC/Ni composite coating on diamond surfaces.

Published in:

Surface Engineering, 2018, v. 34, n. 11, p. 832, doi. 10.1080/02670844.2017.1376847

By:

Xiao, C. J.

Publication type:

Article

Effect of cryogenic thermal cycling on SiC-modified C/C composites.

Published in:

Surface Engineering, 2017, v. 33, n. 3, p. 237, doi. 10.1080/02670844.2016.1216053

By:

Zhang, M.-Y.;
Li, K.-Z.;
Shi, X.-H.;
Liu, N.-K.

Publication type:

Article