Found: 5000
Select item for more details and to access through your institution.
Three-dimensional finite element analysis of the effect of soil liquefaction on the seismic response of a single pile.
- Published in:
- International Journal of Computational Materials Science & Engineering, 2024, v. 13, n. 4, p. 1, doi. 10.1142/S2047684123500331
- By:
- Publication type:
- Article
Bearing capacity factors of single- and double-strip footings placed over an embankment.
- Published in:
- International Journal of Computational Materials Science & Engineering, 2024, v. 13, n. 4, p. 1, doi. 10.1142/S2047684123500318
- By:
- Publication type:
- Article
Force convective heat transfer simulation in a rectangular channel with multiple square obstacles via finite element method.
- Published in:
- Modern Physics Letters B, 2024, v. 38, n. 29, p. 1, doi. 10.1142/S0217984924502440
- By:
- Publication type:
- Article
Analysis and Optimization of a Wavy Rotor FRM with Curved Stator Slots.
- Published in:
- Progress in Electromagnetics Research Letters, 2024, v. 120, p. 81, doi. 10.2528/PIERL24032601
- By:
- Publication type:
- Article
Multi-objective optimized design of two-dimensional multi-phase phononic crystals with materials self-selection.
- Published in:
- International Journal of Modern Physics B: Condensed Matter Physics; Statistical Physics; Applied Physics, 2024, v. 38, n. 23, p. 1, doi. 10.1142/S0217979224503041
- By:
- Publication type:
- Article
Finite element modeling of the rotational dynamics of a single magnetic particle in a strong magnetic field and liquid medium.
- Published in:
- Modern Physics Letters B, 2024, v. 38, n. 26, p. 1, doi. 10.1142/S0217984924502373
- By:
- Publication type:
- Article
The effects of magnetic field and thermal radiation on the mixed convection of Al<sub>2</sub>O<sub>3</sub>-Cu/water hybrid nanofluid over a permeable vertical flat plate.
- Published in:
- Modern Physics Letters B, 2024, v. 38, n. 25, p. 1, doi. 10.1142/S0217984924502427
- By:
- Publication type:
- Article
Optimization of the mechanical performance and damage failure characteristics of laminated composites based on fiber orientation.
- Published in:
- Frontiers of Structural & Civil Engineering, 2024, v. 17, n. 9, p. 1357, doi. 10.1007/s11709-023-0996-4
- By:
- Publication type:
- Article
Optimization design of anti-seismic engineering measures for intake tower based on non-dominated sorting genetic algorithm-II.
- Published in:
- Frontiers of Structural & Civil Engineering, 2024, v. 17, n. 9, p. 1428, doi. 10.1007/s11709-023-0998-2
- By:
- Publication type:
- Article
Fano resonance based on a triangular resonator and its application on nanosensing.
- Published in:
- Modern Physics Letters B, 2024, v. 38, n. 22, p. 1, doi. 10.1142/S0217984924501720
- By:
- Publication type:
- Article
Experimental and numerical study on mechanical behavior of 3D printed adhesive joints with polycarbonate substrates.
- Published in:
- Journal of Applied Polymer Science, 2024, v. 141, n. 29, p. 1, doi. 10.1002/app.55657
- By:
- Publication type:
- Article
Direct Pointwise Comparison of FE Predictions to Stereo DIC Measurements: Developments and Validation Using Double Edge-Notched Tensile Specimen.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2024, v. 140, n. 2, p. 1263, doi. 10.32604/cmes.2024.048743
- By:
- Publication type:
- Article
Experimental and Finite Element Analysis of Corroded High-Pressure Pipeline Repaired by Laminated Composite.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2024, v. 140, n. 2, p. 1784, doi. 10.32604/cmes.2024.047575
- By:
- Publication type:
- Article
Development of a Three-Dimensional Multiscale Octree SBFEM for Viscoelastic Problems of Heterogeneous Materials.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2024, v. 140, n. 2, p. 1831, doi. 10.32604/cmes.2024.048199
- By:
- Publication type:
- Article
A Multiscale Reliability-Based Design Optimization Method for Carbon-Fiber-Reinforced Composite Drive Shafts.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2024, v. 140, n. 2, p. 1975, doi. 10.32604/cmes.2024.050185
- By:
- Publication type:
- Article
Modeling the Interaction between Vacancies and Grain Boundaries during Ductile Fracture.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2024, v. 140, n. 2, p. 2019, doi. 10.32604/cmes.2024.048334
- By:
- Publication type:
- Article
Engineering highly aligned continuous nanofibers via electrospinning: A comprehensive study on collector design, electrode geometry, and collector speed.
- Published in:
- Express Polymer Letters, 2024, v. 18, n. 8, p. 851, doi. 10.3144/expresspolymlett.2024.63
- By:
- Publication type:
- Article
Design Optimization of Flexural and Eigenvalue Characteristics of Perforated and Skewed Bio-Composite Functionally Graded Panels.
- Published in:
- International Journal of Computational Methods, 2024, v. 21, n. 6, p. 1, doi. 10.1142/S0219876224500117
- By:
- Publication type:
- Article
Superconvergence of a Nonconforming Brick Element for the Quad-Curl Problem.
- Published in:
- International Journal of Computational Methods, 2024, v. 21, n. 6, p. 1, doi. 10.1142/S0219876224500129
- By:
- Publication type:
- Article
Modelling spatio-temporal interactions between second messengers Ca2+ and cAMP in a pancreatic β-cell.
- Published in:
- Journal of Bioenergetics & Biomembranes, 2024, v. 56, n. 4, p. 389, doi. 10.1007/s10863-024-10021-2
- By:
- Publication type:
- Article
Extension of the a posteriori finite element method (APFEM) to geometrical alterations and application to stochastic homogenisation.
- Published in:
- International Journal for Numerical Methods in Engineering, 2024, v. 125, n. 14, p. 1, doi. 10.1002/nme.7482
- By:
- Publication type:
- Article
Seismic intensity measures and predictive equations for the evaluation of earthquake—induced crest settlements of earth dams.
- Published in:
- Earthquake Engineering & Structural Dynamics, 2024, v. 53, n. 9, p. 2680, doi. 10.1002/eqe.4135
- By:
- Publication type:
- Article
A bi‐fidelity inverse analysis method for deep excavations considering three‐dimensional effects.
- Published in:
- International Journal for Numerical & Analytical Methods in Geomechanics, 2024, v. 48, n. 10, p. 2471, doi. 10.1002/nag.3742
- By:
- Publication type:
- Article
Fast explicit time integration schemes for parabolic problems in mechanics.
- Published in:
- International Journal for Numerical Methods in Engineering, 2024, v. 125, n. 13, p. 1, doi. 10.1002/nme.7477
- By:
- Publication type:
- Article
Analytical identification of dynamic structural models: Mass matrix of an isospectral lumped mass model.
- Published in:
- Earthquake Engineering & Structural Dynamics, 2024, v. 53, n. 8, p. 2447, doi. 10.1002/eqe.4126
- By:
- Publication type:
- Article
High‐fidelity finite element modeling of the seismic response of prefabricated steel stairs.
- Published in:
- Earthquake Engineering & Structural Dynamics, 2024, v. 53, n. 8, p. 2491, doi. 10.1002/eqe.4117
- By:
- Publication type:
- Article
Seismic response analysis of single‐degree‐of‐freedom structure coupled with tuned self‐centering wall.
- Published in:
- Earthquake Engineering & Structural Dynamics, 2024, v. 53, n. 8, p. 2555, doi. 10.1002/eqe.4127
- By:
- Publication type:
- Article
A novel finite element for the vibration analysis of tapered laminated plates.
- Published in:
- Polymer Composites, 2024, v. 45, n. 10, p. 8732, doi. 10.1002/pc.28372
- By:
- Publication type:
- Article
An inquiry into the uncertainty mechanism: The influence of the number of layers in multilayered damping materials on composite loss factor.
- Published in:
- Polymer Composites, 2024, v. 45, n. 10, p. 9169, doi. 10.1002/pc.28401
- By:
- Publication type:
- Article
A novel micromechanical model for predicting the shear properties of multilayer Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub>MXene/carbon fiber fabric/epoxy composite.
- Published in:
- Polymer Composites, 2024, v. 45, n. 10, p. 9196, doi. 10.1002/pc.28403
- By:
- Publication type:
- Article
A micromechanical study on shear performance of unidirectional composites with randomly distributed fibers in the transverse cross‐section.
- Published in:
- Polymer Composites, 2024, v. 45, n. 10, p. 9251, doi. 10.1002/pc.28407
- By:
- Publication type:
- Article
A multiscale scheme for homogenization to characterize the flexural performances of injection molded short glass fiber reinforced polyether ether ketone composites.
- Published in:
- Polymer Composites, 2024, v. 45, n. 10, p. 9501, doi. 10.1002/pc.28423
- By:
- Publication type:
- Article
Mechanical response and damage evolution of CF/PEEK‐reinforced Al metal‐composite hybrid structure at high strain rate.
- Published in:
- Polymer Composites, 2024, v. 45, n. 10, p. 9543, doi. 10.1002/pc.28426
- By:
- Publication type:
- Article
Active vibration control of piezoelectric multilayers FG‐CNTRC and FG‐GPLRC plates.
- Published in:
- Polymer Composites, 2024, v. 45, n. 10, p. 9573, doi. 10.1002/pc.28428
- By:
- Publication type:
- Article
Effect of hybrid reinforcements on the curing kinetics and mechanical properties of light‐cured polymer composites.
- Published in:
- Polymer Composites, 2024, v. 45, n. 10, p. 9588, doi. 10.1002/pc.28429
- By:
- Publication type:
- Article
A novel experimental method for determination of forming limits with generalized non-planar stress state using hydro-assisted incremental forming.
- Published in:
- Discover Mechanical Engineering, 2024, v. 3, n. 1, p. 1, doi. 10.1007/s44245-024-00048-5
- By:
- Publication type:
- Article
Numerical Study of Rotary Friction Welding of Automotive Components.
- Published in:
- Advances in Science & Technology Research Journal, 2024, v. 18, n. 4, p. 336, doi. 10.12913/22998624/188742
- By:
- Publication type:
- Article
Theoretical Analysis of Radial-Axial Ring Rolling Process of 7075 Aluminium Alloy.
- Published in:
- Advances in Science & Technology Research Journal, 2024, v. 18, n. 4, p. 386, doi. 10.12913/22998624/189901
- By:
- Publication type:
- Article
Numerical Analysis of Selected Variants of Reinforcements of Thin-Walled Open Load-Bearing Structures Subjected to Torsion.
- Published in:
- Advances in Science & Technology Research Journal, 2024, v. 18, n. 4, p. 400, doi. 10.12913/22998624/189549
- By:
- Publication type:
- Article
An Improved Finite Element Model of Temporomandibular Joint in Maxillofacial System: Experimental Validation.
- Published in:
- Annals of Biomedical Engineering, 2024, v. 52, n. 7, p. 1908, doi. 10.1007/s10439-022-03124-7
- By:
- Publication type:
- Article
Finite Element Analysis of Scanning Electron Microscope Illumination System.
- Published in:
- Arabian Journal for Science & Engineering (Springer Science & Business Media B.V. ), 2024, v. 49, n. 7, p. 9871, doi. 10.1007/s13369-023-08529-7
- By:
- Publication type:
- Article
Investigating the deformation characteristics of balloon-type CLT shearwall.
- Published in:
- Canadian Journal of Civil Engineering, 2024, v. 51, n. 7, p. 704, doi. 10.1139/cjce-2023-0233
- By:
- Publication type:
- Article
Study of the Ballistic Impact Behavior of ProtectiveMulti-Layer Composite Armor.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2024, v. 140, n. 1, p. 171, doi. 10.32604/cmes.2024.046703
- By:
- Publication type:
- Article
Modularized and Parametric Modeling Technology for Finite Element Simulations of Underground Engineering under Complicated Geological Conditions.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2024, v. 140, n. 1, p. 621, doi. 10.32604/cmes.2024.046398
- By:
- Publication type:
- Article
Multi-Objective Optimization of Aluminum Alloy Electric Bus Frame Connectors for Enhanced Durability.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2024, v. 140, n. 1, p. 735, doi. 10.32604/cmes.2024.047258
- By:
- Publication type:
- Article
Dynamic Response of Foundations during Startup of High-Frequency Tunnel Equipment.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2024, v. 140, n. 1, p. 821, doi. 10.32604/cmes.2024.048392
- By:
- Publication type:
- Article
Convergence of Adaptive Crouzeix–Raviart and Morley FEM for Distributed Optimal Control Problems.
- Published in:
- Computational Methods in Applied Mathematics, 2024, v. 24, n. 3, p. 599, doi. 10.1515/cmam-2023-0083
- By:
- Publication type:
- Article
Computational Multiscale Methods for Nondivergence-Form Elliptic Partial Differential Equations.
- Published in:
- Computational Methods in Applied Mathematics, 2024, v. 24, n. 3, p. 649, doi. 10.1515/cmam-2023-0040
- By:
- Publication type:
- Article
Space-Time Least-Squares Finite Element Methods for Parabolic Distributed Optimal Control Problems.
- Published in:
- Computational Methods in Applied Mathematics, 2024, v. 24, n. 3, p. 673, doi. 10.1515/cmam-2023-0087
- By:
- Publication type:
- Article
Space-Time FEM for the Vectorial Wave Equation under Consideration of Ohm's Law.
- Published in:
- Computational Methods in Applied Mathematics, 2024, v. 24, n. 3, p. 693, doi. 10.1515/cmam-2023-0079
- By:
- Publication type:
- Article