Works about EPOXY resins
Results: 5000
The restitution coefficient value and damage of composite shields protecting the chassis of a rail vehicle.
- Published in:
- Advances in Science & Technology Research Journal, 2025, v. 19, n. 4, p. 140, doi. 10.12913/22998624/200050
- By:
- Publication type:
- Article
The influence of the matrix properties on mechanical properties of a glass fiber reinforced polymer made by the infusion method.
- Published in:
- Advances in Science & Technology Research Journal, 2025, v. 19, n. 4, p. 206, doi. 10.12913/22998624/200160
- By:
- Publication type:
- Article
Evaluation of root dentin hardness and its morphology after final irrigation with different organic and synthetic irrigants: An in vitro study.
- Published in:
- Endodontology (0970-7212), 2025, v. 37, n. 1, p. 50, doi. 10.4103/endo.endo_100_24
- By:
- Publication type:
- Article
Investigation into the crystallization of poly-lactic acid following the application of a novel high molecular weight, high epoxy functionality polymer chain extender.
- Published in:
- Journal of Polymer Engineering, 2025, v. 45, n. 3, p. 236, doi. 10.1515/polyeng-2024-0224
- By:
- Publication type:
- Article
Impact of Ex Vivo Bisphenol A Exposure on Gut Microbiota Dysbiosis and Its Association with Childhood Obesity.
- Published in:
- Journal of Xenobiotics, 2025, v. 15, n. 1, p. 14, doi. 10.3390/jox15010014
- By:
- Publication type:
- Article
Toughened Bamboo-Fiber-Modified Epoxy Resin: A Novel Polymer Coating for Superior Interfacial Compatibility.
- Published in:
- Coatings (2079-6412), 2025, v. 15, n. 2, p. 181, doi. 10.3390/coatings15020181
- By:
- Publication type:
- Article
Breakdown strength-enhancing study on anti-corona nonlinear material for high-voltage generator stator coils.
- Published in:
- Electrical Engineering, 2025, v. 107, n. 2, p. 2107, doi. 10.1007/s00202-024-02593-4
- By:
- Publication type:
- Article
Evaluation of Cement Remaining After Debonding and Polishing in Lingual Multibracket Appliance Using Planning Imaging 3D Software.
- Published in:
- Materials (1996-1944), 2025, v. 18, n. 4, p. 781, doi. 10.3390/ma18040781
- By:
- Publication type:
- Article
Enhancing the Salt Frost Durability of Concrete with Modified Epoxy Composite Coating.
- Published in:
- Materials (1996-1944), 2025, v. 18, n. 4, p. 737, doi. 10.3390/ma18040737
- By:
- Publication type:
- Article
Computational and Experimental Ballistic Behavior of Epoxy Composites Reinforced with Carnauba Fibers: A Stand-Alone Target and Multilayered Armor System.
- Published in:
- Polymers (20734360), 2025, v. 17, n. 4, p. 534, doi. 10.3390/polym17040534
- By:
- Publication type:
- Article
The Effect of Chemical Surface Modification on the Repair Bond Strength of Resin Composite: An In Vitro Study.
- Published in:
- Polymers (20734360), 2025, v. 17, n. 4, p. 513, doi. 10.3390/polym17040513
- By:
- Publication type:
- Article
Change in Thermodynamic Entropy and Free Volume of Epoxy Resin During Tensile Deformation.
- Published in:
- Polymers (20734360), 2025, v. 17, n. 4, p. 477, doi. 10.3390/polym17040477
- By:
- Publication type:
- Article
High-Efficiency Surface-Cooled Rapid Tooling Development for Injection Molding of Low-Density Polyethylene.
- Published in:
- Polymers (20734360), 2025, v. 17, n. 4, p. 468, doi. 10.3390/polym17040468
- By:
- Publication type:
- Article
Effect of Electron Beam Irradiation on the Percentage Loss of Tensile Modulus of Epoxy Polymer.
- Published in:
- Polymers (20734360), 2025, v. 17, n. 4, p. 447, doi. 10.3390/polym17040447
- By:
- Publication type:
- Article
Development of a Next-Generation Cooling Channel Technology with High Cooling Efficiency by Roughing Cooling Channels Using a Combination of Laser Machining and Embossing Techniques.
- Published in:
- Micromachines, 2025, v. 16, n. 2, p. 225, doi. 10.3390/mi16020225
- By:
- Publication type:
- Article
Epoxy as an Alternative Resin in Particleboard Production with Pine Wood Residues: Physical, Mechanical, and Microscopical Analyses of Panels at Three Resin Proportions.
- Published in:
- Forests (19994907), 2025, v. 16, n. 2, p. 196, doi. 10.3390/f16020196
- By:
- Publication type:
- Article
IN VITRO STUDY: THE APICAL SEALING ABILITY EVALUATION OF A NEW EXPERIMENTAL NANO HYDROXYAPATITE-FILLED EPOXY RESIN BASED ENDODONTIC SEALER.
- Published in:
- Malaysian Journal of Medical Sciences, 2007, v. 14, p. 185
- By:
- Publication type:
- Article
Accuracy of Casts Fabricated by Digital and Conventional Implant Impressions.
- Published in:
- Journal of Oral Implantology, 2019, v. 45, n. 2, p. 94, doi. 10.1563/aaid-joi-D-17-00142
- By:
- Publication type:
- Article
Peri-Implant Biomechanical Responses to Standard, Short-Wide, and Mini Implants Supporting Single Crowns Under Axial and Off-Axial Loading (an In Vitro Study).
- Published in:
- Journal of Oral Implantology, 2014, v. 40, n. 1, p. 42, doi. 10.1563/AAID-JOI-D-11-00102
- By:
- Publication type:
- Article
In Vitro Analysis of Resistance to Cyclic Load and Preload Distribution of Two Implant/Abutment Screwed Connections.
- Published in:
- Journal of Oral Implantology, 2013, v. 39, n. 3, p. 292, doi. 10.1563/AAID-JOI-D-10-00144
- By:
- Publication type:
- Article
Ichnodiversity and bathymetric range of microbioerosion traces in polar barnacles of Svalbard.
- Published in:
- Polar Research, 2020, v. 39, p. 1, doi. 10.33265/polar.v39.3766
- By:
- Publication type:
- Article
Fiber-reinforced compo-sites developed using garment cut waste: Arumugam Arunraj EIT Polytechnic College, Erode/India S. Ariharasudhan, A. Thambidurai, S. Sundaresan Kumaraguru College of Technology, Coimbatore/India.
- Published in:
- Melliand International / Melliand Textilberichte, 2025, n. 1, p. 58
- Publication type:
- Article
New method for damage assessment in Martindale abrasion testing.
- Published in:
- Melliand International / Melliand Textilberichte, 2018, n. 1, p. 36
- By:
- Publication type:
- Article
Effect of Low-Temperature Installation on Adhesive Anchors.
- Published in:
- Concrete International, 2016, v. 38, n. 1, p. 48
- By:
- Publication type:
- Article
ACI Committee Document Abstracts.
- Published in:
- 2015
- Publication type:
- Abstract
Public Discussion.
- Published in:
- Concrete International, 2015, v. 37, n. 4, p. 72
- Publication type:
- Article
Structural Repair of Concrete Cracks.
- Published in:
- Concrete International, 2015, v. 37, n. 4, p. 52
- By:
- Publication type:
- Article
Product Showcase.
- Published in:
- 2015
- Publication type:
- Product Review
W.R. MEADOWS.
- Published in:
- 2007
- Publication type:
- Product Review
Tips for Epoxy Resin Injection.
- Published in:
- Concrete International, 2005, v. 27, n. 11, p. 44
- By:
- Publication type:
- Article
SELECTOR GUIDE FOR CONCRETE CRACK REPAIR EPOXY.
- Published in:
- Concrete International, 2004, v. 26, n. 12, p. 29
- Publication type:
- Article
Products & Practice.
- Published in:
- Concrete International, 2004, v. 26, n. 6, p. 80
- Publication type:
- Article
W.R. MEADOWS.
- Published in:
- Concrete International, 2004, v. 26, n. 3, p. 137
- Publication type:
- Article
4-O-Acetylation and 3-O-Acetylation of Trichothecenes by Trichothecene 15-O-Acetyltransferase Encoded by Fusarium Tri3.
- Published in:
- Bioscience, Biotechnology & Biochemistry, 2008, v. 72, n. 9, p. 2485, doi. 10.1271/bbb.80501
- By:
- Publication type:
- Article
Analysis of Differentially Regulated Proteins in TM4 Cells Treated with Bisphenol A.
- Published in:
- Bioscience, Biotechnology & Biochemistry, 2004, v. 68, n. 6, p. 1201, doi. 10.1271/bbb.68.1201
- By:
- Publication type:
- Article
Interfacial Bonding Enhancement Between Cryogenic Conditioned Carbon Fiber and Epoxy Resin Characterized by the Single-Fiber Fragmentation Method.
- Published in:
- AATCC Review, 2021, v. 21, n. 4, p. 45, doi. 10.14504/ajr.8.4.1
- By:
- Publication type:
- Article
How to Win with Lamination.
- Published in:
- AATCC Review, 2010, v. 10, n. 5, p. 41
- By:
- Publication type:
- Article
Effect of Reinforcing Elements on Burning Behavior of Fiber-Reinforced Polymeric Composites.
- Published in:
- AATCC Review, 2010, v. 10, n. 4, p. 51
- By:
- Publication type:
- Article
Friction and Mechanical Properties of Cluster Diamond Dispersed Epoxy Resin.
- Published in:
- Surface Engineering, 2003, v. 19, n. 6, p. 437, doi. 10.1179/0267084032250082
- By:
- Publication type:
- Article
A Comparative Analysis of Tensile Characteristics of Epoxy Composites: Assessing TWARMAT, Woven Glass, and Woven Carbon Fiber Reinforcements.
- Published in:
- Mechanics of Composite Materials, 2024, v. 60, n. 4, p. 789, doi. 10.1007/s11029-024-10226-x
- By:
- Publication type:
- Article
Impact Strength of Coir Fiber/Boron Nitride/Fly Ash Fortified Epoxy Composite.
- Published in:
- Mechanics of Composite Materials, 2024, v. 60, n. 2, p. 353, doi. 10.1007/s11029-024-10191-5
- By:
- Publication type:
- Article
Mechanical Properties of Alfa, Sisal, and Hybrid Alfa/Sisal Fiber Satin Cloth Reinforced Epoxy.
- Published in:
- Mechanics of Composite Materials, 2024, v. 60, n. 1, p. 145, doi. 10.1007/s11029-024-10180-8
- By:
- Publication type:
- Article
Compression Behavior of a Wood-Based Triangular Prism-Type Lattice Sandwich Structure.
- Published in:
- Mechanics of Composite Materials, 2023, v. 59, n. 5, p. 989, doi. 10.1007/s11029-023-10147-1
- By:
- Publication type:
- Article
Correction to: Compression Mechanics for Carbon-Fiber-Reinforced Epoxy Resin Composites under in-Plane and out-of-Plane Quasi-Static and Dynamic Loadings.
- Published in:
- 2023
- By:
- Publication type:
- Correction Notice
Influence of Polyethersulfone on the Fracture Toughness of Epoxy Matrices and Reinforced Plastics on Their Basis.
- Published in:
- Mechanics of Composite Materials, 2023, v. 59, n. 4, p. 743, doi. 10.1007/s11029-023-10128-4
- By:
- Publication type:
- Article
Long-Term Storage Capability Prediction for Composite Directors in MLRS: Considering the Influence of Actual Environment.
- Published in:
- Mechanics of Composite Materials, 2023, v. 59, n. 4, p. 631, doi. 10.1007/s11029-023-10121-x
- By:
- Publication type:
- Article
Compression Mechanics for Carbon-Fiberreinforced Epoxy Resin Composites Under Inplane and Out-Of-Plane Quasi-Static and Dynamic Loadings.
- Published in:
- Mechanics of Composite Materials, 2023, v. 59, n. 3, p. 507, doi. 10.1007/s11029-023-10112-y
- By:
- Publication type:
- Article
Effect of Oligomeric Copolyimides on the Properties of Epoxy Binders.
- Published in:
- Mechanics of Composite Materials, 2023, v. 58, n. 6, p. 857, doi. 10.1007/s11029-023-10074-1
- By:
- Publication type:
- Article
Effect of Halloysite Nanotubes on Matrix Microcracking in Carbon Fiber/Epoxy Composites.
- Published in:
- Mechanics of Composite Materials, 2022, v. 58, n. 2, p. 293, doi. 10.1007/s11029-022-10030-5
- By:
- Publication type:
- Article
Recycling of Fiberglass Fillers Obtained from Polymer Composites Based on an Epoxy Vinyl Ester Binder.
- Published in:
- Mechanics of Composite Materials, 2022, v. 58, n. 4, p. 537, doi. 10.1007/s11029-022-10048-9
- By:
- Publication type:
- Article