Works matching DE "EFFECT of temperature on polymers"
Results: 98
Transparente und leitfähige Veredelung von Kunststoffoberflächen.
- Published in:
- Vakuum in Forschung und Praxis, 2015, v. 27, n. 3, p. 36, doi. 10.1002/vipr.201500583
- By:
- Publication type:
- Article
Effect of Solvent Type on High-Temperature Thermal Gradient Interaction Chromatography of Polyethylene and Ethylene-1-Octene Copolymers.
- Published in:
- Macromolecular Chemistry & Physics, 2015, v. 216, n. 1, p. 38, doi. 10.1002/macp.201400367
- By:
- Publication type:
- Article
Room Temperature Fluorescent Conjugated Polymer Gums.
- Published in:
- Advanced Functional Materials, 2014, v. 24, n. 13, p. 1928, doi. 10.1002/adfm.201302829
- By:
- Publication type:
- Article
Effect of DOPO units and of polydimethylsiloxane segments on the properties of epoxy resins.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 24, p. 8520, doi. 10.1007/s10853-013-7670-5
- By:
- Publication type:
- Article
Preparation of expanded graphite/poly (phenylene sulfide) composites with high thermal and electrical conductivity by rotating solid-state premixing and melt processing.
- Published in:
- Journal of Materials Science, 2013, v. 48, n. 5, p. 1932, doi. 10.1007/s10853-012-6958-1
- By:
- Publication type:
- Article
The Influence of Strain Amplitude, Temperature and Frequency on Complex Shear Moduli of Polymer Materials under Kinematic Harmonic Loading.
- Published in:
- Mechanics & Mechanical Engineering, 2017, v. 21, n. 1, p. 157
- By:
- Publication type:
- Article
Resistance to Thermal Degradation of Polypropylene in Presence of Nano Zinc Oxide.
- Published in:
- Progress in Rubber, Plastics & Recycling Technology, 2014, v. 30, n. 4, p. 211, doi. 10.1177/147776061403000402
- By:
- Publication type:
- Article
The Continuum Directed Random Polymer.
- Published in:
- Journal of Statistical Physics, 2014, v. 154, n. 1/2, p. 305, doi. 10.1007/s10955-013-0872-z
- By:
- Publication type:
- Article
Effect of Carbon Fibers on Thermal and Mechanical Properties of Metakaolin Fly-Ash-Based Geopolymers.
- Published in:
- ACI Materials Journal, 2015, v. 112, n. 3, p. 375, doi. 10.14359/51687391
- By:
- Publication type:
- Article
The effect of ethylene glycol on starch-g-PCL graft copolymer synthesis.
- Published in:
- Starch / Staerke, 2016, v. 68, n. 11/12, p. 1148, doi. 10.1002/star.201600070
- By:
- Publication type:
- Article
Structure and Properties of Poly (Vinyl Alcohol)/Soy Protein Isolate Blend Film Fabricated Through Melt Processing.
- Published in:
- Journal of Polymers & the Environment, 2015, v. 23, n. 2, p. 183, doi. 10.1007/s10924-014-0682-7
- By:
- Publication type:
- Article
Water Absorption Kinetics and Hygrothermal Aging of Poly(lactic acid) Containing Halloysite Nanoclay and Maleated Rubber.
- Published in:
- Journal of Polymers & the Environment, 2015, v. 23, n. 2, p. 242, doi. 10.1007/s10924-014-0699-y
- By:
- Publication type:
- Article
Molecular Dynamics Simulations and Hygrothermal Aging of Polyurea-POSS Nanocomposites.
- Published in:
- Journal of Polymers & the Environment, 2015, v. 23, n. 2, p. 171, doi. 10.1007/s10924-015-0710-2
- By:
- Publication type:
- Article
Effect of Poly( para-dioxanone) on the Hydrolytic Degradation of Poly( l-lactide).
- Published in:
- Journal of Polymers & the Environment, 2015, v. 23, n. 2, p. 156, doi. 10.1007/s10924-014-0670-y
- By:
- Publication type:
- Article
Thermal Degradation Kinetic of Polylactic Acid in Multiple Extrusions.
- Published in:
- Ingeniería y Universidad, 2015, v. 19, n. 1, p. 189, doi. 10.11144/Javeriana.iyu19-1.tdkp
- By:
- Publication type:
- Article
Ultrasound-assisted emulsion polymerization of poly(methyl methacrylate- co-butyl acrylate): Effect of initiator content and temperature.
- Published in:
- Polymer Engineering & Science, 2016, v. 56, n. 2, p. 214, doi. 10.1002/pen.24249
- By:
- Publication type:
- Article
Extraction of polymer stress-strain behavior in the presence of self-heating by the use of a simple model for the elastic-plastic deformation.
- Published in:
- Polymer Engineering & Science, 2015, v. 55, n. 11, p. 2474, doi. 10.1002/pen.24137
- By:
- Publication type:
- Article
Comparative Study of High Performance Polymers in Selective Inhibition Sintering Process Through Finite Element Analysis.
- Published in:
- Polymers & Polymer Composites, 2017, v. 25, n. 3, p. 199, doi. 10.1177/096739111702500303
- By:
- Publication type:
- Article
Characterization of polymeric shape memory materials.
- Published in:
- Journal of Polymer Engineering, 2017, v. 37, n. 1, p. 1, doi. 10.1515/polyeng-2015-0370
- By:
- Publication type:
- Article
EFFECT OF POLY(D-LACTIC ACID) ON PHYSICAL PROPERTIES OF POLY(LACTIC ACID)/NATURAL RUBBER BLENDS.
- Published in:
- Suranaree Journal of Science & Technology, 2016, v. 23, n. 2, p. 129
- By:
- Publication type:
- Article
Synthesis of super high molecular weight copolymer of AM/NaA/AMPS by oxidation–reduction and controlled radical polymerization.
- Published in:
- Petroleum Science (Springer Nature), 2020, v. 17, n. 1, p. 242, doi. 10.1007/s12182-019-00385-1
- By:
- Publication type:
- Article
Heat affected zones in polymer laser marking.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2014, v. 115, n. 2, p. 1427, doi. 10.1007/s10973-013-3443-2
- By:
- Publication type:
- Article
High temperature properties of MDF composite based on calcium aluminate cement and polyvinyl alcohol.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2014, v. 115, n. 2, p. 1245, doi. 10.1007/s10973-013-3481-9
- By:
- Publication type:
- Article
Recent progress in thermal analysis of polymers: experimental techniques and a new aspect of temperature in measurement of material properties.
- Published in:
- Polymer International, 2017, v. 66, n. 2, p. 207, doi. 10.1002/pi.5162
- By:
- Publication type:
- Article
Effects of acid treatment at different temperatures on the surface dielectric properties of low-density polyethylene.
- Published in:
- Polymer International, 2014, v. 63, n. 11, p. 1924, doi. 10.1002/pi.4731
- By:
- Publication type:
- Article
A Comparison between the Lower Critical Solution Temperature Behavior of Polymers and Biomacromolecules.
- Published in:
- Physchem, 2022, v. 2, n. 1, p. 52, doi. 10.3390/physchem2010005
- By:
- Publication type:
- Article
Effect of Temperature and a Non-Solvent Addition on the Specific Volume of Poly (Sodium-4-Styrene Sulfonate) in Water.
- Published in:
- Journal of Macromolecular Science: Physics, 2016, v. 55, n. 12, p. 1173, doi. 10.1080/00222348.2016.1256182
- By:
- Publication type:
- Article
SANS study on self-assembled structures of Pluronic F127 triblock copolymer induced by additives and temperature.
- Published in:
- Journal of Applied Crystallography, 2014, v. 47, n. 1, p. 53, doi. 10.1107/S1600576713030094
- By:
- Publication type:
- Article
Preparation of synthetic hydrocarbon oil by high-pressure hydrocracking of ethylene-propylene copolymers.
- Published in:
- Petroleum Chemistry, 2014, v. 54, n. 2, p. 154, doi. 10.1134/S0965544114020078
- By:
- Publication type:
- Article
Coils in oils.
- Published in:
- Tribology & Lubrication Technology, 2016, v. 72, n. 8, p. 78
- By:
- Publication type:
- Article
Temperature-Dependent Conformations of Model Viscosity Index Improvers.
- Published in:
- Tribology & Lubrication Technology, 2015, v. 71, n. 5, p. 30
- By:
- Publication type:
- Article
Switchable electrolyte properties and redox chemistry in aqueous media based on temperature-responsive polymers.
- Published in:
- Journal of Applied Electrochemistry, 2015, v. 45, n. 8, p. 921, doi. 10.1007/s10800-015-0839-7
- By:
- Publication type:
- Article
Effects of Seawater and Low Temperatures on Polymeric Foam Core Material.
- Published in:
- Experimental Mechanics, 2012, v. 52, n. 1, p. 25, doi. 10.1007/s11340-011-9564-2
- By:
- Publication type:
- Article
A Methodology for Obtaining Material Properties of Polymeric Foam at Elevated Temperatures.
- Published in:
- Experimental Mechanics, 2012, v. 52, n. 1, p. 3, doi. 10.1007/s11340-011-9519-7
- By:
- Publication type:
- Article
Mouthguard sheet temperature after heating.
- Published in:
- 2018
- By:
- Publication type:
- journal article
MICROSTRUCTURAL ANALYSIS OF FLY ASH BASED GEOPOLYMER EXPOSED TO ELEVATED TEMPERATURES.
- Published in:
- Acta Technica Corviniensis - Bulletin of Engineering, 2017, v. 10, n. 2, p. 117
- By:
- Publication type:
- Article
Fullerene (C<sub>60</sub>) Containing Poly (N-isopropylacrylamide) Thermo-responsive Smart Hydrogels and their Swelling Behavior.
- Published in:
- Journal of Polymer Materials, 2013, v. 30, n. 1, p. 15
- By:
- Publication type:
- Article
Studies on Ethylene-Propylene-Diene-Terpolymer (Epdm)/Fluorocarbon Rubber(fkm) Blends: Effect of Maleic Anhydride Grafted Ethylene-Propylene-Diene-Terpolymer as a Compatibilizer.
- Published in:
- Journal of Polymer Materials, 2013, v. 30, n. 1, p. 37
- By:
- Publication type:
- Article
Comparative Study of Two Softwood Species Industrially Modified by Thermowood® and Thermo-Vacuum Process.
- Published in:
- BioResources, 2018, v. 13, n. 1, p. 715, doi. 10.15376/biores.13.1.715-728
- By:
- Publication type:
- Article
Using Surface Modified E-Glass Fiber Cloths to Enhance Poplar Laminated Veneer Lumber Composites: Effects of Modification Conditions, Gluing Processes, Hot- Pressing Parameters, and Assembly Patterns on Physical-mechanical and Interfacial Properties.
- Published in:
- BioResources, 2018, v. 13, n. 1, p. 597, doi. 10.15376/biores.13.1.597-631
- By:
- Publication type:
- Article
Effects of Acid Pre-Treatments on the Swelling and Vapor Sorption of Thermally Modified Scots Pine (Pinus sylvestris L.) Wood.
- Published in:
- BioResources, 2018, v. 13, n. 1, p. 331, doi. 10.15376/biores.13.1.331-345
- By:
- Publication type:
- Article
Effect of Temperature on Polyelectrolyte Expansion of Lignosulfonate.
- Published in:
- BioResources, 2015, v. 10, n. 1, p. 575
- By:
- Publication type:
- Article
Effect of Temperature on a Lignin-based Polymer with Two Types of Microstructures.
- Published in:
- BioResources, 2014, v. 9, n. 4, p. 6304, doi. 10.15376/biores.9.4.
- By:
- Publication type:
- Article
Latex Films with In-Plane Composition Gradients Caused by Lateral Drying.
- Published in:
- Soft Materials, 2015, v. 13, n. 3, p. 138, doi. 10.1080/1539445X.2015.1039650
- By:
- Publication type:
- Article
The influence of temperature on the copolymerisation of 1,3-butadiene and styrene using a modified lithium-containing initiating system.
- Published in:
- International Polymer Science & Technology, 2017, v. 44, n. 2, p. 9, doi. 10.1177/0307174X1704400202
- By:
- Publication type:
- Article
The influence of the method used to prepare electrically conductive composites based on polyethylene, polypropylene, and carbon black on their properties at elevated temperatures.
- Published in:
- International Polymer Science & Technology, 2016, v. 43, n. 3, p. 13, doi. 10.1177/0307174X1604300303
- By:
- Publication type:
- Article
Determining the thermophysical properties of thermoplastic composite materials.
- Published in:
- International Polymer Science & Technology, 2013, v. 40, n. 9, p. T23, doi. 10.1177/0307174X1304000905
- By:
- Publication type:
- Article
INFLUENCE OF THE COMPRESSION MOLDING TEMPERATURE ON THERMOMECHANICAL PROPERTIES OF THE BASALT-REINFORCED POLY(LACTIC ACID) (PLA) COMPOSITES.
- Published in:
- Romanian Journal of Materials / Revista Romana de Materiale, 2018, v. 48, n. 1, p. 108
- By:
- Publication type:
- Article
Behaviour of Carbon and Basalt Fibres Reinforced Fly Ash Geopolymer at Elevated Temperatures.
- Published in:
- International Journal of Concrete Structures & Materials, 2018, v. 12, n. 1, p. 1, doi. 10.1186/s40069-018-0267-2
- By:
- Publication type:
- Article
Phase Morphology and Mechanical Properties of Cyclic Butylene Terephthalate Oligomer-Containing Rubbers: Effect of Mixing Temperature.
- Published in:
- Materials (1996-1944), 2016, v. 9, n. 9, p. 722, doi. 10.3390/ma9090722
- By:
- Publication type:
- Article