Works about DIRECT metal laser sintering

Results: 310

Impact of process parameters on mechanical properties and surface characteristics in hybrid metal additive manufacturing of maraging steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 9/10, p. 4559, doi. 10.1007/s00170-024-14704-3

By:

Sakib, Tanvir;
Enemuoh, Emmanuel Ugo;
Houle, Thomas;
Bauer, Lucas

Publication type:

Article

Computational study of rapid direct metal laser sintering for compression mold manufacturing.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 6073, doi. 10.1007/s00170-024-13014-y

By:

Mirzaei, Shokoufeh;
Siaumau, Ryan

Publication type:

Article

Investigating mechanical and surface porosity values of high-performing 3D-printed titanium alloys along with stress-relieving heat treatments.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 11/12, p. 4939, doi. 10.1007/s00170-023-12552-1

By:

Subeshan, Balakrishnan;
Asmatulu, Eylem;
Ma, Annie Tran;
Bakir, Mete;
Asmatulu, Ramazan

Publication type:

Article

Design of additive manufactured reference block with disk reflectors for sensitivity calibration of ultrasonic angle beam probes.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 5/6, p. 1907, doi. 10.1007/s00170-023-11214-6

By:

Mihaljević, Morana;
Markučič, Damir;
Katić, Marko;
Grozdanić, Maria;
Kožić, Karlo

Publication type:

Article

Investigation of effect of conformal cooling inserts in high-pressure die casting of AlSi9Cu3.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 11/12, p. 7311, doi. 10.1007/s00170-022-09808-7

By:

Karakoc, Can;
Dizdar, Kerem Can;
Dispinar, Derya

Publication type:

Article

Direct metal laser sintering of Ti-6Al-4V parts with reused powder.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 1/2, p. 1013, doi. 10.1007/s00170-022-08807-y

By:

Contaldi, Vincenzo;
Corrado, Pasquale;
Del Re, Francesco;
Di Martino, Daniela;
Di Petta, Paolo;
Palumbo, Biagio;
Scherillo, Fabio;
Squillace, Antonino

Publication type:

Article

Comparison of the effect of different topological designs and process parameters on mechanical strength in gears.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 9/10, p. 6707, doi. 10.1007/s00170-021-08405-4

By:

Bulduk, Mustafa Enes;
Çalışkan, Cemal İrfan;
Coşkun, Mert;
Özer, Gökhan;
Koç, Ebubekir

Publication type:

Article

Investigation of manufacturability and efficiency of micro channels with different geometries produced by direct metal laser sintering.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 11/12, p. 3805, doi. 10.1007/s00170-021-07928-0

By:

Çalışkan, Cemal İrfan;
Coşkun, Mert;
Özer, Gökhan;
Koç, Ebubekir;
Vurkır, Turgut Azer;
Yöndem, Gökay

Publication type:

Article

A low-cost and highly efficient method of reducing coolant leakage for direct metal printed injection mold with cooling channels using optimum heat treatment process procedures.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 7/8, p. 2553, doi. 10.1007/s00170-021-07323-9

By:

Kuo, Chil-Chyuan;
Qiu, Shao-Xuan;
Yang, Xin-Yi

Publication type:

Article

Investigation of direct metal laser sintering downskin parameters' sagging effect on microchannels.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 9/10, p. 2567, doi. 10.1007/s00170-021-07057-8

By:

Çalışkan, Cemal İrfan;
Özer, Gökhan;
Coşkun, Mert;
Koç, Ebubekir

Publication type:

Article

Residual stresses and heat treatments of Inconel 718 parts manufactured via metal laser beam powder bed fusion: an overview.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 11/12, p. 3139, doi. 10.1007/s00170-021-06835-8

By:

Teixeira, Óscar;
Silva, Francisco J. G.;
Atzeni, Eleonora

Publication type:

Article

Optimization of direct metal printing process parameters for plastic injection mold with both gas permeability and mechanical properties using design of experiments approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 109, n. 5/6, p. 1219, doi. 10.1007/s00170-020-05724-w

By:

Kuo, Chil-Chyuan;
Yang, Xin-Yi

Publication type:

Article

Anisotropy of additively manufactured AlSi10Mg: threads and surface integrity.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 107, n. 9/10, p. 3645, doi. 10.1007/s00170-020-05243-8

By:

Ullah, Rizwan;
Akmal, Jan Sher;
Laakso, Sampsa V. A.;
Niemi, Esko

Publication type:

Article

Surface roughness and densification correlation for direct metal laser sintering.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 107, n. 5/6, p. 2833, doi. 10.1007/s00170-020-05194-0

By:

Attarzadeh, Faridreza;
Fotovvati, Behzad;
Fitzmire, Michael;
Asadi, Ebrahim

Publication type:

Article

Mechanical characterisation of stainless steel parts produced by direct metal laser sintering with virgin and reused powder.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3337, doi. 10.1007/s00170-019-04416-4

By:

Contaldi, V.;
Del Re, F.;
Palumbo, B.;
Squillace, A.;
Corrado, P.;
Di Petta, P.

Publication type:

Article

Microstructure and mechanical properties of direct metal laser–sintered 15-5PH steel with different solution annealing heat treatments.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 7/8, p. 3499, doi. 10.1007/s00170-019-04404-8

By:

Alafaghani, Ala'aldin;
Qattawi, Ala;
Jaman, Md Shah;
Ablat, Muhammad Ali

Publication type:

Article

Investigation of electrochemical post-processing procedure for Ti-6Al-4V lattice structure manufactured by direct metal laser sintering (DMLS).

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 104, n. 9-12, p. 3401, doi. 10.1007/s00170-019-03996-5

By:

Dong, Guoying;
Marleau-Finley, Julien;
Zhao, Yaoyao Fiona

Publication type:

Article

Size effects on geometrical accuracy for additive manufacturing of Ti-6Al-4V ELI parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 104, n. 5-8, p. 2951, doi. 10.1007/s00170-019-04184-1

By:

Fotovvati, Behzad;
Asadi, Ebrahim

Publication type:

Article

Effect of manufacturing parameters on the microstructure and mechanical properties of metal laser sintering parts of precipitate hardenable metals.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 99, n. 9-12, p. 2491, doi. 10.1007/s00170-018-2586-5

By:

Alafaghani, Ala’aldin;
Qattawi, Ala;
Castañón, Mauricio Alberto Garza

Publication type:

Article

Direct metal laser sintering of TiN reinforced Ti6Al4V alloy based metal matrix composite: Fabrication and characterization.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 97, n. 5-8, p. 2635, doi. 10.1007/s00170-018-2159-7

By:

Kundu, Sudip;
Hussain, Manowar;
Kumar, Vikas;
Kumar, Shakti;
Das, Alok Kumar

Publication type:

Article

A study on spectral characterization and quality detection of direct metal deposition process based on spectral diagnosis.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 96, n. 9-12, p. 4231, doi. 10.1007/s00170-018-1889-x

By:

Chen, Bo;
Yao, Yongzhen;
Tan, Caiwang;
Huang, Yuhua;
Feng, Jicai

Publication type:

Article

Direct metal laser-sintered stainless steel: comparison of microstructure and hardness between different planes.

Published in:

International Journal of Advanced Manufacturing Technology, 2018, v. 95, n. 9-12, p. 4031, doi. 10.1007/s00170-017-1528-y

By:

Ghasri-Khouzani, M.;
Peng, H.;
Attardo, R.;
Ostiguy, P.;
Neidig, J.;
Billo, R.;
Hoelzle, D.;
Shankar, M. R.

Publication type:

Article

Innovative designs of an in-tank hydrogen valve towards direct metal laser sintering compatibility and fatigue life enhancement.

Published in:

Structural & Multidisciplinary Optimization, 2019, v. 59, n. 6, p. 2319, doi. 10.1007/s00158-018-2174-1

By:

Cao, Thanh Binh;
Kedziora, Slawomir

Publication type:

Article

Hot isostatic pressing as an alternative thermo‐mechanical treatment for metallic full‐arch implant‐supported frameworks obtained by additive and subtractive manufacturing technology: Vertical and horizontal fit, screw removal torque, and stress analysis

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2024, v. 33, p. 70, doi. 10.1111/jopr.13842

By:

Barbin, Thaís;
Borges, Guilherme Almeida;
Jardini, André Luiz;
Mesquita, Marcelo Ferraz

Publication type:

Article

The impact of print orientation on the fracture resistance and failure patterns of additively manufactured cobalt‐chromium post and cores.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2023, v. 32, n. 8, p. 714, doi. 10.1111/jopr.13762

By:

Kalyoncuoğlu, Ülkü Tuğba;
Ayyıldız, Simel;
Odabasi Tezer, Emine

Publication type:

Article

Effect of Palatal Vault Depth on the Trueness of Metal Laser‐Sintered and Cast Cobalt‐Chromium Removable Partial Denture Frameworks.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2023, v. 32, n. 4, p. 353, doi. 10.1111/jopr.13558

By:

Hamed, Hala Abd El;
Hebeshi, Ahmed M.;
Husseiny, Eman

Publication type:

Article

Effect of Internal Design Modification on the Mechanical Properties of Laser Sintered Cobalt‐Chromium Multi‐Unit Metal‐Ceramic Frameworks.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2022, v. 31, n. 9, p. 766, doi. 10.1111/jopr.13501

By:

Kocak, Elif Figen;
Ekren, Orhun;
Ucar, Yurdanur

Publication type:

Article

Influence of Digital Technologies and Framework Design on the Load to Fracture of Co‐Cr Posterior Fixed Partial Denture Frameworks.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2022, v. 31, n. 7, p. 606, doi. 10.1111/jopr.13458

By:

Tobar, Celia;
Rodriguez, Veronica;
Lopez‐Suarez, Carlos;
Pelaez, Jesus;
Suarez, Maria J.

Publication type:

Article

Glossary of Digital Dental Terms, 2nd Edition: American College of Prosthodontists and ACP Education Foundation.

Published in:: Journal of Prosthodontics (John Wiley & Sons, Inc.), 2021, v. 30, p. 172, doi. 10.1111/jopr.13439
Publication type:: Article

Evaluation of the Marginal and Internal Fit of Implant‐Supported Metal Copings Fabricated with 3 Different Techniques: An In Vitro Study.

Published in:

Journal of Prosthodontics (John Wiley & Sons, Inc.), 2019, v. 28, n. 3, p. 315, doi. 10.1111/jopr.13022

By:

Yildirim, Bengisu;
Paken, Gamze

Publication type:

Article

Study on Performance of EDM Electrodes Produced Through Rapid Tooling Route.

Published in:

Journal of Advanced Manufacturing Systems, 2017, v. 16, n. 4, p. 357, doi. 10.1142/S0219686717500214

By:

Mohanty, Saumya Darsan;
Mohanty, Ramesh Chandra;
Mahapatra, Siba Sankar

Publication type:

Article

Design and development of a novel additively manufactured geothermal heat exchanger.

Published in:

International Journal of Energy Research, 2022, v. 46, n. 3, p. 3335, doi. 10.1002/er.7384

By:

Kabirnajafi, Mohammadmehdi;
Gemeda, Takele;
Demisse, Wondwosen;
Estrada, Sandy;
Wang, Lei;
Xu, Jiajun

Publication type:

Article

Feasibility Study on Additive Manufacturing of Liquid Rocket Combustion Chamber.

Published in:

Transactions of the Japan Society of Aeronautical & Space Sciences, Aerospace Technology Japan, 2018, v. 16, n. 3, p. 261, doi. 10.2322/tastj.16.261

By:

Shinichi MORIYA;
Takuma INOUE;
Masahiro SASAKI;
Takayuki NAKAMOTO;
Takahiro KIMURA;
Naoyuki NOMURA;
Keiko KIKUCHI;
Akira KAWASAKI;
Toshiki KATO;
Ideo MASUDA

Publication type:

Article

Combined Stereophotogrammetry and Laser-Sintered, Computer-Aided Milling Framework for an Implant-Supported Mandibular Prosthesis: A Case History Report.

Published in:

2018

By:

Suarez, Maria J.;
Paisal, Iria;
Rodriguez-Alonso, Veronica;
Lopez-Suarez, Carlos

Publication type:

journal article

Effect of Build Orientation and Heat Treatment on Erosion Behavior of Al10SiMg Fabricated Using Laser Powder Bed Fusion.

Published in:

Tribology in Industry, 2023, v. 45, n. 4, p. 561, doi. 10.24874/ti.1470.04.23.06

By:

Angolkar, Pooja;
Hussain, M. Manzoor

Publication type:

Article

Effect of Cryogenic Treatment on the Wear Behavior of Additive Manufactured 316L Stainless Steel.

Published in:

Tribology in Industry, 2019, v. 41, n. 1, p. 33, doi. 10.24874/ti.2019.41.01.04

By:

Sugavaneswaran, M.;
Kulkarni, A.

Publication type:

Article

Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation.

Published in:

International Journal of Production Research, 2017, v. 55, n. 23, p. 6957, doi. 10.1080/00207543.2017.1334978

By:

Baumers, Martin;
Beltrametti, Luca;
Gasparre, Angelo;
Hague, Richard

Publication type:

Article

On the Design and Fabrication of Chained-Function Waveguide Filters with Reduced Fabrication Sensitivity Using CNC and DMLS.

Published in:

Progress in Electromagnetics Research B, 2020, v. 87, p. 39, doi. 10.2528/pierb20011101

By:

Yuan Ping Lim;
Cheab, Sovuthy;
Soeung, Socheatra;
Peng Wen Wong

Publication type:

Article

Design and evaluation of a distally actuated powered finger prosthesis with self-contained transmission for individuals with partial hand loss.

Published in:

Advances in Mechanical Engineering (Sage Publications Inc.), 2019, v. 11, n. 4, p. 1, doi. 10.1177/1687814019834114

By:

Murali, Barathwaj;
Huddle, Stephen;
F ff Weir, Richard

Publication type:

Article

Microstructural and Mechanical Characterization of a Custom-Built Implant Manufactured in Titanium Alloy by Direct Metal Laser Sintering.

Published in:

Advances in Mechanical Engineering (Sage Publications Inc.), 2014, p. 1, doi. 10.1155/2014/945819

By:

Larosa, Maria Aparecida;
Jardini, André Luiz;
de Carvalho Zavaglia, Cecília Amélia;
Kharmandayan, Paulo;
Reis Calderoni, Davi;
Maciel Filho, Rubens

Publication type:

Article

Immediate Loading of Mandibular Overdentures Supported by One-Piece, Direct Metal Laser Sintering Mini-Implants: A Short-Term Prospective Clinical Study.

Published in:

Journal of Periodontology, 2015, v. 86, n. 2, p. 192, doi. 10.1902/jop.2014.140343

By:

Mangano, Francesco G.;
Caprioglio, Alberto;
Levrini, Luca;
Farronato, Davide;
Zecca, Piero A.;
Mangano, Carlo

Publication type:

Article

Direct Metal Laser Melting versus dentaler Feinguss.

Published in:

Quintessenz der Zahntechnik, 2019, v. 45, n. 8, p. 1000

By:

MUTSCHLER, MORITZ;
ZYLLA, ISABELLA-MARIA;
GEIS-GERSTORFER, JÜRGEN;
EDELMANN, KARSTEN;
KRAUSE, JOACHIM;
BÜNEMANN, JENS;
PEDERZANI, NILS;
SCHMITT, UWE;
MERTINS, JULIA;
LAGARIS, ALEXANDROS;
EBERT, ROLF;
SPINTZYK, SEBASTIAN

Publication type:

Article

DESIGN AND INVESTIGATION OF MACHINE TOOL BED BASED ON POLYMER CONCRETE MIXTURE.

Published in:

International Journal of Simulation Modelling (IJSIMM), 2020, v. 19, n. 2, p. 291, doi. 10.2507/IJSIMM19-2-518

By:

Poklemba, R.;
Duplakova, D.;
Zajac, J.;
Duplak, J.;
Simkulet, V.;
Goldyniak, D.

Publication type:

Article

Interface microstructure and mechanical properties of selective laser melting‐formed CuCrZr alloy for 316 L stainless steel.

Published in:

Materialwissenschaft und Werkstoffechnik, 2025, v. 56, n. 1, p. 88, doi. 10.1002/mawe.202400101

By:

Wang, Y.;
Liu, B.;
Tang, Q.;
Huo, W.;
Li, Z.;
Bai, Y.

Publication type:

Article

Do repeated firings affect the color properties of porcelain‐fused‐metal restorations that are fabricated differently?

Published in:

Color Research & Application, 2019, v. 44, n. 3, p. 473, doi. 10.1002/col.22360

By:

Çelik, Ersan;
Tulga, Ayça

Publication type:

Article

Custom-made 3D printed subperiosteal titanium implants for the prosthetic restoration of the atrophic posterior mandible of elderly patients: a case series.

Published in:

3D Printing in Medicine, 2020, v. 6, n. 1, p. 1, doi. 10.1186/s41205-019-0055-x

By:

Mangano, Carlo;
Bianchi, Andrea;
Mangano, Francesco Guido;
Dana, Jessica;
Colombo, Marco;
Solop, Ivan;
Admakin, Oleg

Publication type:

Article

A digital workflow for modeling of custom dental implants.

Published in:

3D Printing in Medicine, 2019, v. 5, n. 1, p. N.PAG, doi. 10.1186/s41205-019-0046-y

By:

Surovas, Andrejus

Publication type:

Article

Editorial for Special Issue "Advances in Computer-Aided Technology II".

Published in:

2024

By:

Pollák, Martin;
Kočiško, Marek

Publication type:

Editorial

Effect of Hardening Temperature on Maraging Steel Samples Prepared by Direct Metal Laser Sintering Process.

Published in:

Machines, 2023, v. 11, n. 3, p. 351, doi. 10.3390/machines11030351

By:

Vandzura, Radoslav;
Simkulet, Vladimir;
Gelatko, Matus;
Hatala, Michal;
Mitalova, Zuzana

Publication type:

Article

Delayed Orbital Floor Reconstruction Using Mirroring Technique and Patient-Specific Implants: Proof of Concept.

Published in:

Journal of Personalized Medicine, 2024, v. 14, n. 5, p. 459, doi. 10.3390/jpm14050459

By:

D'Alpaos, Diana;
Badiali, Giovanni;
Ceccariglia, Francesco;
Tarsitano, Achille

Publication type:

Article