Works about DEAD loads (Mechanics)
Results: 2906
VALIDITY AND RELIABILITY OF TWO STRAIN GAUGES TO MEASURE UPPER-BODY RELATIVE STRENGTH IN GYMNASTICS STILL RINGS.
- Published in:
- Science of Gymnastics Journal, 2025, v. 17, n. 1, p. 139, doi. 10.52165/sgj.17.1.139-151
- By:
- Publication type:
- Article
Dynamic Amplification Analysis of the Main Girder of Cable-Stayed Bridges After Cable Rupture Using the Modal Superposition Method.
- Published in:
- Buildings (2075-5309), 2025, v. 15, n. 4, p. 596, doi. 10.3390/buildings15040596
- By:
- Publication type:
- Article
Analysis of Damage Mechanism of Ellipsoidal Assembled Tower Joint.
- Published in:
- Buildings (2075-5309), 2025, v. 15, n. 4, p. 572, doi. 10.3390/buildings15040572
- By:
- Publication type:
- Article
Dynamic Response and Settlement Cause Analysis of Roadbed–Soft Clay Foundation System Under Traffic Vibration Loads.
- Published in:
- Applied Sciences (2076-3417), 2025, v. 15, n. 4, p. 2163, doi. 10.3390/app15042163
- By:
- Publication type:
- Article
Field Monitoring and Numerical Analysis of the Effect of Air Temperature and Water Load on the Static Behavior of a Tied-Arch Aqueduct.
- Published in:
- Applied Sciences (2076-3417), 2025, v. 15, n. 4, p. 2030, doi. 10.3390/app15042030
- By:
- Publication type:
- Article
不同抵抗线影响下层状岩体爆破的破岩规律.
- Published in:
- Coal Science & Technology (0253-2336), 2024, v. 52, n. 12, p. 60, doi. 10.12438/cst.2023-1612
- By:
- Publication type:
- Article
渭北地区中更新世黄土的压电性试验研究.
- Published in:
- Coal Geology & Exploration, 2025, v. 53, n. 1, p. 184, doi. 10.12363/issn.1001-1986.24.07.0445
- By:
- Publication type:
- Article
Optimization of inputs for the application of ANN to rail track granular materials.
- Published in:
- Canadian Geotechnical Journal, 2025, v. 62, p. 1, doi. 10.1139/cgj-2024-0384
- By:
- Publication type:
- Article
Influence of Load Variation on the Flow Field and Stability of the Francis Turbine.
- Published in:
- Journal of Marine Science & Engineering, 2025, v. 13, n. 2, p. 316, doi. 10.3390/jmse13020316
- By:
- Publication type:
- Article
Effect of Corrosive Environment on Short-Term and Long-Term Mechanical Properties of Drill Pipes Made of Aluminum Alloys 2024 and 1953T1.
- Published in:
- Metal Science & Heat Treatment, 2025, v. 66, n. 9, p. 566, doi. 10.1007/s11041-025-01087-9
- By:
- Publication type:
- Article
Conceptual Design and Aerostructural Trade-Offs in Hydrogen- Powered Strut-Braced Wing Aircraft: Insights into Dry and Wet Ultra-High Aspect Ratio Wings.
- Published in:
- Aerospace (MDPI Publishing), 2025, v. 12, n. 2, p. 77, doi. 10.3390/aerospace12020077
- By:
- Publication type:
- Article
Study on the Magnetic Contact Mechanical Properties of Polyurethane-Based Magnetorheological Elastomer Sealing Materials.
- Published in:
- Lubricants (2075-4442), 2025, v. 13, n. 2, p. 88, doi. 10.3390/lubricants13020088
- By:
- Publication type:
- Article
Investigation of the Contact Characteristics of a Single-Nut Ball Screw Considering Geometric Errors.
- Published in:
- Lubricants (2075-4442), 2025, v. 13, n. 2, p. 57, doi. 10.3390/lubricants13020057
- By:
- Publication type:
- Article
CFD-Based Investigation of Static and Dynamic Pressure Effect in Aerostatic Bearings with Annular Grooves at High Speed.
- Published in:
- Lubricants (2075-4442), 2025, v. 13, n. 2, p. 46, doi. 10.3390/lubricants13020046
- By:
- Publication type:
- Article
Multiscale dynamics analysis of lumbar vertebral cortical bone based on the Abaqus submodel finite element method.
- Published in:
- Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-91918-9
- By:
- Publication type:
- Article
Suitable Granular Road Base from Reclaimed Asphalt Pavement.
- Published in:
- Materials (1996-1944), 2025, v. 18, n. 4, p. 854, doi. 10.3390/ma18040854
- By:
- Publication type:
- Article
Numerical Simulation Study on Microseismic Characteristics and Rockburst Hazard Prediction in Deep Mining of Steeply Inclined Coal Seams: Numerical Simulation Study on Microseismic Characteristics...: A. Lu et al.
- Published in:
- Rock Mechanics & Rock Engineering, 2025, v. 58, n. 2, p. 2465, doi. 10.1007/s00603-024-04288-5
- By:
- Publication type:
- Article
A Biomechanical Comparative Analysis of Abutment Screw Head Designs on Preload Stability Under Oblique Compressive Forces: An In Vitro Pilot Study.
- Published in:
- Journal of Oral Implantology, 2024, v. 50, n. 6, p. 617, doi. 10.1563/aaid-joi-D-24-00128
- By:
- Publication type:
- Article
Effect of Different Implant-Abutment Connection Materials on the Fracture Resistance of Zirconia Abutments.
- Published in:
- Journal of Oral Implantology, 2020, v. 46, n. 2, p. 88, doi. 10.1563/aaid-joi-D-19-00192
- By:
- Publication type:
- Article
Evaluation of Stress in Tilted Implant Concept With Variable Diameters in the Atrophic Mandible: Three-Dimensional Finite Element Analysis.
- Published in:
- Journal of Oral Implantology, 2020, v. 46, n. 1, p. 19, doi. 10.1563/aaid-joi-D-19-00066
- By:
- Publication type:
- Article
Concrete Members—Assembling Loads.
- Published in:
- Concrete International, 2005, v. 27, n. 3, p. 64
- By:
- Publication type:
- Article
Performance Properties of Wilton Type Carpets with Relief Texture Effect Produced Using Shrinkable, High Bulk and Relaxed Acrylic Pile Yarns.
- Published in:
- AATCC Review, 2009, v. 9, n. 9, p. 43
- By:
- Publication type:
- Article
Experimental Characterisation of Bonded Repaired Sandwich Composites Under Static and Fatigue Bending Loading.
- Published in:
- Mechanics of Composite Materials, 2025, v. 60, n. 6, p. 1071, doi. 10.1007/s11029-025-10246-1
- By:
- Publication type:
- Article
Static Response and Buckling Loads of Multilayered Composite Beams Using the Refined Zigzag Theory and Higher-Order Haar Wavelet Method.
- Published in:
- Mechanics of Composite Materials, 2021, v. 57, n. 1, p. 1, doi. 10.1007/s11029-021-09929-2
- By:
- Publication type:
- Article
Mechanical Properties of a Basalt-Fiber-Reinforced Plastic Rod Used in Composite High-Voltage Wires in Torsion and Three-Point Bending.
- Published in:
- Mechanics of Composite Materials, 2020, v. 56, n. 3, p. 353, doi. 10.1007/s11029-020-09886-2
- By:
- Publication type:
- Article
Static Analysis of Properties of a Composite Slab Made from Steel Fibers and a Reinforced Foam Concrete.
- Published in:
- Mechanics of Composite Materials, 2019, v. 55, n. 4, p. 535, doi. 10.1007/s11029-019-09832-x
- By:
- Publication type:
- Article
Shear Creep Behavior of an Adhesive Resin System at the Interface Between an Orthodontic Bracket and Enamel.
- Published in:
- Mechanics of Composite Materials, 2019, v. 55, n. 2, p. 275, doi. 10.1007/s11029-019-09811-2
- By:
- Publication type:
- Article
Experimental, analytical, and numerical studies of composite sandwich panels under low-velocity impact loadings.
- Published in:
- Mechanics of Composite Materials, 2012, v. 47, n. 6, p. 643, doi. 10.1007/s11029-011-9244-4
- By:
- Publication type:
- Article
Speed Tuning of the Formation/Dissociation of a Metallorotaxane.
- Published in:
- Angewandte Chemie, 2023, v. 135, n. 11, p. 1, doi. 10.1002/ange.202217048
- By:
- Publication type:
- Article
Creep behaviour of single hemp fibres. Part I: viscoelastic properties and their scattering under constant climate.
- Published in:
- Journal of Materials Science, 2015, v. 50, n. 4, p. 1996, doi. 10.1007/s10853-014-8767-1
- By:
- Publication type:
- Article
Self-healing of delamination fatigue cracks in carbon fibre-epoxy laminate using mendable thermoplastic.
- Published in:
- Journal of Materials Science, 2012, v. 47, n. 10, p. 4449, doi. 10.1007/s10853-012-6303-8
- By:
- Publication type:
- Article
Influence of environmental relative humidity on the tensile and rotational behaviour of hemp fibres.
- Published in:
- Journal of Materials Science, 2012, v. 47, n. 7, p. 3435, doi. 10.1007/s10853-011-6191-3
- By:
- Publication type:
- Article
Correlation among sintering process, porosity, and creep deformation of refractory concrete.
- Published in:
- Journal of Materials Science, 2009, v. 44, n. 11, p. 2844, doi. 10.1007/s10853-009-3376-0
- By:
- Publication type:
- Article
Residual toughness of poly(acrylonitrile-butadiene-styrene) (ABS) after fatigue loading—effect of uniaxial fatigue loading.
- Published in:
- Journal of Materials Science, 2004, v. 39, n. 15, p. 4821, doi. 10.1023/B:JMSC.0000035320.91308.15
- By:
- Publication type:
- Article
Water Inrush Modes Through a Thick Aquifuge Floor in a Deep Coal Mine and Appropriate Control Technology: A Case Study from Hebei, China.
- Published in:
- Mine Water & the Environment, 2022, v. 41, n. 4, p. 954, doi. 10.1007/s10230-022-00891-6
- By:
- Publication type:
- Article
The biomechanics of the supraspinatus-deficient shoulder treated with superior capsular reconstruction vs. reverse total shoulder arthroplasty—experimental study.
- Published in:
- International Orthopaedics, 2020, v. 44, n. 11, p. 2371, doi. 10.1007/s00264-020-04674-y
- By:
- Publication type:
- Article
The effect of the post length and cusp coverage on the cycling and static load of endodontically treated maxillary premolars.
- Published in:
- Clinical Oral Investigations, 2011, v. 15, n. 6, p. 923, doi. 10.1007/s00784-010-0466-y
- By:
- Publication type:
- Article
A study of the performance of lignosulfonate-treated high plastic clay under static and cyclic loading.
- Published in:
- Bulletin of Engineering Geology & the Environment, 2021, v. 80, n. 10, p. 8265, doi. 10.1007/s10064-021-02444-7
- By:
- Publication type:
- Article
Under and post-construction probabilistic static and seismic slope stability analysis of Barmshour Landfill, Shiraz City, Iran.
- Published in:
- Bulletin of Engineering Geology & the Environment, 2021, v. 80, n. 7, p. 5451, doi. 10.1007/s10064-021-02277-4
- By:
- Publication type:
- Article
Determining the critical blasting load of cracked strip bauxite pillars.
- Published in:
- Bulletin of Engineering Geology & the Environment, 2021, v. 80, n. 6, p. 4639, doi. 10.1007/s10064-021-02219-0
- By:
- Publication type:
- Article
Experimental study on dynamic fatigue properties of dolomite samples under triaxial multilevel cyclic loading.
- Published in:
- Bulletin of Engineering Geology & the Environment, 2021, v. 80, n. 1, p. 551, doi. 10.1007/s10064-020-01954-0
- By:
- Publication type:
- Article
Experimental study on crack formation in sandstone during crater blasting under high geological stress.
- Published in:
- Bulletin of Engineering Geology & the Environment, 2020, v. 79, n. 3, p. 1323, doi. 10.1007/s10064-019-01665-1
- By:
- Publication type:
- Article
Three-dimensional stability analysis of seismically induced landslides using the displacement-based rigorous limit equilibrium method.
- Published in:
- Bulletin of Engineering Geology & the Environment, 2019, v. 78, n. 7, p. 4743, doi. 10.1007/s10064-018-01444-4
- By:
- Publication type:
- Article
Investigating the deformability of grouted rock mass under static and dynamic loading conditions.
- Published in:
- Bulletin of Engineering Geology & the Environment, 2019, v. 78, n. 6, p. 4549, doi. 10.1007/s10064-018-1414-3
- By:
- Publication type:
- Article
Assessment of mechanical properties and phase-structural state in corrosion-resistant steels under static and low-cycle loading.
- Published in:
- Strength of Materials, 2007, v. 39, n. 5, p. 466, doi. 10.1007/s11223-007-0052-y
- By:
- Publication type:
- Article
Experimental and Theoretical Design Methodology of Hemispherical Shells under Extreme Static Loading.
- Published in:
- Strength of Materials, 2004, v. 36, n. 5, p. 518, doi. 10.1023/B:STOM.0000048401.67602.7b
- By:
- Publication type:
- Article
Fatigue Fracture Toughness of Metals and Alloys. Part 1. Experimental Procedures and Materials and General Principles.
- Published in:
- Strength of Materials, 2003, v. 35, n. 1, p. 1, doi. 10.1023/A:1022909018616
- By:
- Publication type:
- Article
Analysis of the pressure-volume relationship for the eyeball loaded by a flat stamp on the basis of a two-segment elastic model.
- Published in:
- Fluid Dynamics, 2011, v. 46, n. 5, p. 673, doi. 10.1134/S0015462811050012
- By:
- Publication type:
- Article
Interaction among interfacial offset cracks in composite materials under the anti‐plane shear loading.
- Published in:
- ZAMM -- Journal of Applied Mathematics & Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2023, v. 103, n. 11, p. 1, doi. 10.1002/zamm.202300081
- By:
- Publication type:
- Article
Nonlocalized thermal behavior of rotating micromachined beams under dynamic and thermodynamic loads.
- Published in:
- ZAMM -- Journal of Applied Mathematics & Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2022, v. 102, n. 4, p. 1, doi. 10.1002/zamm.202100310
- By:
- Publication type:
- Article