Works about CUTTING machines

Results: 965

Tool-edge geometry effects in semi-to-finish cut machining operations on subsurface integrity and tool thermo-mechanical loadings: A coupled damage-fracture energy based finite element approach.

Published in:

Mechanics of Advanced Materials & Structures, 2025, v. 32, n. 11, p. 2479, doi. 10.1080/15376494.2024.2380817

By:

Asad, Muhammad

Publication type:

Article

Fertigung mit robuster Brennschneidmaschine erweitert.

Published in:: Praktiker, 2025, n. 5, p. 6
Publication type:: Article

切割和过盈配合对双绕组双聚磁式磁场调制无刷复合结构电机性能影响的研究.

Published in:

Electric Machines & Control / Dianji Yu Kongzhi Xuebao, 2025, v. 29, n. 2, p. 1, doi. 10.15938/j.emc.2025.02.001

By:

刘国鹏;
白金刚;
郎杰文;
王于涛;
隋义;
郑萍

Publication type:

Article

Experimental study of ultrasonic vibration-assisted milling of titanium alloys with longitudinal torsion of microstructure tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 3, p. 1449, doi. 10.1007/s00170-025-15655-z

By:

Wu, Meiyi;
Niu, Qiulin;
Gao, Jingyi;
Xie, Zhilong;
Zhang, Yu;
Tan, Junwei

Publication type:

Article

Increasing the positioning accuracy of the operative member in a three-axis metal cutting machine tool: Differential geometric model of volumetric errors.

Published in:

Measurement Techniques, 2025, v. 67, n. 11, p. 803, doi. 10.1007/s11018-025-02401-w

By:

Grigoriev, Sergey N.;
Masterenko, Dmitriy A.;
Pimushkin, Yaroslav I.;
Stebulyanin, Mikhail M.

Publication type:

Article

Fabrication and performance evaluation of a solar-powered multipurpose agricultural machine.

Published in:

Agricultural Engineering International: CIGR Journal, 2025, v. 27, n. 1, p. 85

By:

Milufarzana;
Banu, Selina;
Or-Rashid, Md. Harun;
Hasan, Md. Rakib

Publication type:

Article

An accurate roughness prediction in milling processes through analytical evaluation and KNN regression approach.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 1, p. 137, doi. 10.1007/s00170-024-14526-3

By:

Calì, Michele;
Baiamonte, Giuliana;
Laudani, Giuseppe;
Di Martino, Gianfranco;
Grasso, Mario

Publication type:

Article

LightGBM and CatBoost for tool wear prediction in milling with drag-finished cutting edges.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 9, p. 4631, doi. 10.1007/s00170-025-15419-9

By:

Zeilmann, Rodrigo Panosso;
Subtil, Jean Lucca Nunes

Publication type:

Article

A review of research on hole machining technology for FRP/LA laminated materials: From mechanical drilling to non-traditional machining.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 5, p. 2109, doi. 10.1007/s00170-025-15181-y

By:

Shi, Wentian;
Ma, Tong;
Li, Jian;
Li, Jie;
Zhang, Xiaoqing;
Guo, Biao;
Wen, Zhenyang;
Li, Jianing;
Wang, Lin;
Cao, Shangguo

Publication type:

Article

Simulation study on multi-process milling deformation of frame thin-walled parts considering initial residual stress.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 11, p. 5553, doi. 10.1007/s00170-025-15199-2

By:

Li, Cuihao;
Yue, Caixu;
Xu, Yongshi;
Liu, Xianli;
Wang, Le;
Hu, Desheng

Publication type:

Article

Analysis, modelling and optimization during sustainable Dry and MQL turning of AISI 52100 steel using DF, GRA, EAMR, EDAS and FUCA methods.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 11, p. 5035, doi. 10.1007/s00170-024-14736-9

By:

Souaidi, Chaima;
Yallese, Mohamed Athman;
Amirat, Abdelaziz;
Belhadi, Salim;
Mabrouki, Tarek

Publication type:

Article

Evolutionary optimization technique to minimize energy consumption for dry turning operation processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 5/6, p. 2243, doi. 10.1007/s00170-024-14600-w

By:

abdelaoui, Fatima Zohra El;
Boharb, Ali;
Moujibi, Nabil;
Zaghar, Hamid;
Barkany, Abdellah El;
Jabri, Abdelouahhab

Publication type:

Article

New plunge milling cutter and two-dimensional cavity process based on dislocation chip-separation principle.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 3/4, p. 1551, doi. 10.1007/s00170-024-14609-1

By:

Guo, Minglong;
Wang, Zhibin;
Wei, Zhaocheng;
Zhang, Zhihong;
He, Shaolin

Publication type:

Article

Evaluating productivity characteristics of laser engineered net shaping titanium alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 3/4, p. 1377, doi. 10.1007/s00170-024-14599-0

By:

Polishetty, Ashwin;
Bolar, Gururaj;
Nomani, Junior;
Littelfair, Guy

Publication type:

Article

Investigation on the mechanism of serrated chip formation and surface microstructure evolution during high-speed cutting of ATI 718plus superalloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 3/4, p. 1647, doi. 10.1007/s00170-024-14561-0

By:

Gao, Xuhang;
Yao, Changfeng;
Tan, Liang;
Cui, Minchao;
Tang, Wenhao;
Shi, Guangyuan

Publication type:

Article

Reducing the contour error of leading and trailing edge through feedrate scheduling in 5-axis machining of blisk.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 9/10, p. 4887, doi. 10.1007/s00170-024-14456-0

By:

Wang, Zhiwei;
Lin, Xiaojun;
Shan, Chenwei;
Tian, Heng

Publication type:

Article

Configuration of tool wear and its mechanism in sustainable machining of titanium alloys with energy signals.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 7/8, p. 3561, doi. 10.1007/s00170-024-14336-7

By:

Vashishtha, Govind;
Chauhan, Sumika;
Gupta, Munish Kumar;
Korkmaz, Mehmet Erdi;
Ross, Nimel Sworna;
Zimroz, Radoslaw;
Krolczyk, Grzegorz M.

Publication type:

Article

Energy-exergy analysis and co-optimization of compressed cold air-cooling system for dry cutting machine tools.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 5/6, p. 2867, doi. 10.1007/s00170-024-14283-3

By:

Lai, Kexu;
Cao, Huajun;
Li, Benjie;
Wang, Qianyue

Publication type:

Article

Machining properties of as-built additive manufactured Ti6Al4V titanium alloy through selective laser melting: a comprehensive investigation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 3/4, p. 1991, doi. 10.1007/s00170-024-14251-x

By:

Pal, Surinder;
Velay, Xavier;
Saleem, Waqas

Publication type:

Article

Dynamic simulation and active vibration control design of an ultra-precision fly-cutting machine tool.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 9/10, p. 4663, doi. 10.1007/s00170-024-13996-9

By:

Lu, Hanjing;
Ma, Ziyao;
Chen, Gangli;
Ding, Yuanyuan;
Chen, Yiheng;
Chang, Yu;
Rui, Xiaoting

Publication type:

Article

Optimizing cutting speeds in a machining bottleneck stage in order to reach the takt time with the minimum machining cost.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 9/10, p. 4679, doi. 10.1007/s00170-024-13947-4

By:

Pires, José Roberto;
Diniz, Anselmo Eduardo

Publication type:

Article

Overview of research on machining mechanism of aluminum-based silicon carbide composites (SiCp/Al).

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3133, doi. 10.1007/s00170-024-13885-1

By:

Hao, Zhaopeng;
Xu, Yongshuo;
Fan, Yihang;
Lin, Jieqiong

Publication type:

Article

Experimental study of cutting forces and surface topography in three-dimensional vibration-assisted milling for fabricating structured surfaces.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1285, doi. 10.1007/s00170-024-13804-4

By:

Wang, Guilian;
Xiao, Mengjie;
Liu, Wenrui;
Lv, Bingrui;
Xu, Jinyou

Publication type:

Article

A data and mechanism hybrid driven cutting parameter optimization method considering the machine tool and coolant condition flexibility.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 3/4, p. 1349, doi. 10.1007/s00170-024-13704-7

By:

Zhu, Futang;
Zhao, Xikun;
Wang, Chunsheng;
Li, Congbo;
Lu, Chao;
Zhang, Chao

Publication type:

Article

Manipulation order optimization in industrial pick-and-place operations: application to textile and leather industry.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 1/2, p. 987, doi. 10.1007/s00170-024-13436-8

By:

Martínez-Peral, Francisco José;
Migallón, Héctor;
Borrell-Méndez, Jorge;
Martínez-Rach, Miguel;
Pérez-Vidal, Carlos

Publication type:

Article

Overcoming machining challenges in hybrid laser metal deposition of IN718 with heat-assisted minimum quantity lubrication.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 11/12, p. 5407, doi. 10.1007/s00170-024-13646-0

By:

Kapil, Angshuman;
Ozaner, Ozan Can;
Sato, Yuji;
Hayashi, Yoshihiko;
Ikeda, Keiichiro;
Suga, Tetsuo;
Tsukamoto, Masahiro;
Karabulut, Sener;
Bilgin, Musa;
Sharma, Abhay

Publication type:

Article

Experimental and numerical study on thin silicon wafer CO<sub>2</sub> laser cutting and damage investigation.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 9/10, p. 4857, doi. 10.1007/s00170-024-13675-9

By:

Moghadasi, Kaveh;
Tamrin, Khairul Fikri;
Sheikh, Nadeem Ahmed;
Kram, Abdul Rahman;
Barroy, Pierre;
Mahmud, Fahizan;
Khan, Amir Azam

Publication type:

Article

Influence of micro-textured polycrystalline diamond tools on the machining performance of titanium alloy Ti-6Al-4V in dry turning.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 9/10, p. 4297, doi. 10.1007/s00170-024-13636-2

By:

Palanivel, Ramaswamy;
Dinaharan, Isaac;
Laubscher, Rudolph Frans;
Alswat, Haitham M

Publication type:

Article

Through hole-cutting conic posture optimization for a redundant 3D laser cutting machine.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 1/2, p. 443, doi. 10.1007/s00170-024-13252-0

By:

Ding, Zhipeng;
Soccio, Pietro;
Indri, Marina;
Rizzo, Alessandro

Publication type:

Article

Construction of a predictive model for residual stresses in micro-milling of 7075 aluminum alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3871, doi. 10.1007/s00170-024-13239-x

By:

Zhang, Ping;
Zhang, Songting;
Wang, Shunxiang;
Sun, Yajie;
Yue, Xiujie

Publication type:

Article

Comparative investigation and optimization of cutting tools performance during milling machining of titanium alloy (Ti6Al4V) using response surface methodology.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3565, doi. 10.1007/s00170-024-13225-3

By:

Phokobye, Solomon Ntshiniki;
Desai, Dawood Ahmed;
Tlhabadira, Isaac;
Sadiku, Emmanuel Rotimi;
Mutombo, Kalenda

Publication type:

Article

Electroplasticity effects: from mechanism to application.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 5/6, p. 3267, doi. 10.1007/s00170-023-12072-y

By:

Liu, Jiahao;
Jia, Dongzhou;
Fu, Ying;
Kong, Xiangqing;
Lv, Zhenlin;
Zeng, Erjun;
Gao, Qi

Publication type:

Article

Cutting performance and machining economy of the hard cutting tools in clean cutting of hardened H13 steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5165, doi. 10.1007/s00170-024-13012-0

By:

Jing, Chengli;
Zheng, Guangming;
Cheng, Xiang;
Cui, Yuxin;
Liu, Huanbao;
Zhang, Huaqiang

Publication type:

Article

High surface integrity machining of typical aviation difficult-to-machine material blade.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 2861, doi. 10.1007/s00170-023-12533-4

By:

Wu, Dongbo;
Liu, Shibo;
Wang, Hui

Publication type:

Article

A study on multi-factor geometry-physical modeling and simulation in machine tool cutting processes.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 5/6, p. 2491, doi. 10.1007/s00170-023-12490-y

By:

Liu, Wei;
Ma, Hengyuan;
Zhou, Xionghui;
Niu, Qiang

Publication type:

Article

Effect of asymmetric texture on cutting performance of YT15 carbide tool and its derivative cutting.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 5/6, p. 2635, doi. 10.1007/s00170-023-12355-4

By:

Yang, Yu;
Yang, Fazhan;
Huang, Ke;
Liu, Zhaowei

Publication type:

Article

Revealing cutting mode transition in diamond cutting of SiCp/Al based on specific cutting energy model.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 1/2, p. 909, doi. 10.1007/s00170-023-12318-9

By:

Lu, Shijin;
Li, Zengqiang;
Zhang, Junjie;
Sun, Tao

Publication type:

Article

AWJ machining of high-volume fraction SiC<sub>p</sub>/Al composites.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 1/2, p. 941, doi. 10.1007/s00170-023-12229-9

By:

Liu, Xin;
Yao, Longxu;
Li, Hui;
Wang, Bing;
Zhao, Changxi;
Zheng, Liyan;
Liao, Yinghao;
Wang, Dian

Publication type:

Article

Research on the dynamic tracking error compensation method of the linear axis of an ultraprecision lathe based on a piezo nanopositioning platform.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 11/12, p. 5315, doi. 10.1007/s00170-023-12266-4

By:

Fu, Siyuan;
Yang, Hong;
Cui, Kaihua;
Sun, Shouli;
Duan, Fang;
Jiang, Zhong;
Zhang, Yongbin

Publication type:

Article

Planning of cutting tool feed direction for low-damage surface milling of CFRP: considering the changes in the action form of the tool edge on fiber.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 11/12, p. 5101, doi. 10.1007/s00170-023-12148-9

By:

Wang, Fuji;
Yang, Lelin;
Li, Yue;
Deng, Jun;
Lin, Yongquan;
He, Qingsong;
Fu, Rao

Publication type:

Article

Machining parameters and distortion analyses in end milling of AA2050 and AA7050.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 7/8, p. 2915, doi. 10.1007/s00170-023-12062-0

By:

Ates, Elvan;
Evis, Zafer;
Ozturk, Fahrettin

Publication type:

Article

Study on electrochemical machining of involute internal spline of Cr-Co-Mo-Ni high-hardness gear steel.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 7/8, p. 3233, doi. 10.1007/s00170-023-12000-0

By:

Huang, Jingshan;
Yao, Bin;
Wang, Xi;
Shen, Lei;
Jin, Lin

Publication type:

Article

Prediction of a chatter stability of thin-walled parts during high-speed milling considering a variation of dynamic characteristics based on surface roughness measurement.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 11/12, p. 5729, doi. 10.1007/s00170-023-11945-6

By:

Damous, Mohamed;
Zeroudi, Nasreddine;
Chellil, Ahmed;
Ikkache, Kamel

Publication type:

Article

Tribological effects of micromilling of hardened AISI D2 steel on tool wear and top burr formation.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 11/12, p. 5327, doi. 10.1007/s00170-023-11819-x

By:

dos Santos, Anderson Júnior;
Reis, Bárbara Cristina Mendanha;
Pereira, Natália Fernanda Santos;
de Oliveira, Diogo Azevedo;
Rubio, Juan Carlos Campos;
Abrão, Alexandre Mendes;
Câmara, Marcelo Araújo

Publication type:

Article

Finite element simulation of residual stress in milling of aluminum alloy with different passes.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 9/10, p. 4199, doi. 10.1007/s00170-023-11795-2

By:

Xu, Yongshi;
Yue, Caixu;
Chen, Zhitao;
Li, Ming;
Wang, Le;
Liu, Xianli

Publication type:

Article

Process monitoring of the AISI D6 steel turning using artificial neural networks.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3569, doi. 10.1007/s00170-023-11745-y

By:

Rubin, Victor Hugo Serafim;
da Silva, Leonardo Rosa Ribeiro;
Okada, Kenji Fabiano Ávila;
de Souza, Felipe Chagas Rodrigues;
Pimenov, Danil Yurievich;
Gravalos, Marcio Tadeu;
Machado, Alisson Rocha

Publication type:

Article

Automatic definition of tool life under heavy roughing five-axis milling process in production environment.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 3/4, p. 1951, doi. 10.1007/s00170-022-10058-w

By:

Lacerda, Rafael Segantin;
Diniz, Anselmo Eduardo

Publication type:

Article

Overview of titanium alloy cutting based on machine learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 11/12, p. 4749, doi. 10.1007/s00170-023-11475-1

By:

Chen, YongLong;
Wu, Weilong;
Dai, Houfu

Publication type:

Article

Assessment of geometrical dimensions and puncture feasibility of microneedles manufactured by micromilling.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 11/12, p. 4983, doi. 10.1007/s00170-023-11467-1

By:

Tamez-Tamez, Jeanette I.;
Vázquez-Lepe, Elisa;
Rodriguez, Ciro A.;
Martínez-López, J. Israel;
García-López, Erika

Publication type:

Article

Illumination system optimal design for geometry measurement of complex cutting tools in machine vision.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 105, doi. 10.1007/s00170-022-10491-x

By:

Wang, Wenqi;
Liu, Wei;
Zhang, Yang;
Zhang, Peidong;
Si, Likun;
Zhou, Mengde

Publication type:

Article