Found: 524
Select item for more details and to access through your institution.
Initial Wear of Fixed Diamond Wire Tool –Effect of Slurry Assisted Slicing on Machining Mechanism—.
- Published in:
- International Journal of Automation Technology, 2024, v. 18, n. 4, p. 483, doi. 10.20965/ijat.2024.p0483
- By:
- Publication type:
- Article
Review on Cutting Fluids: Formulation, Chemistry and Deformulation.
- Published in:
- Journal of Oleo Science, 2024, v. 73, n. 7, p. 921, doi. 10.5650/jos.ess24068
- By:
- Publication type:
- Article
A Study on the Machinability and Environmental Effects of Milling AISI 5140 Steel in Sustainable Cutting Environments.
- Published in:
- Machines, 2024, v. 12, n. 7, p. 436, doi. 10.3390/machines12070436
- By:
- Publication type:
- Article
Machinability study of stainless steel AISI 304 under the influence of copper oxide nanoparticles dispersed emulsifier cutting fluid.
- Published in:
- Materialwissenschaft und Werkstoffechnik, 2024, v. 55, n. 7, p. 953, doi. 10.1002/mawe.202300220
- By:
- Publication type:
- Article
Experimental Research on the Supply of Working Fluid for Fixed Diamond Wire Slicing Based on Ultrasonic Capillary Effect.
- Published in:
- Micromachines, 2024, v. 15, n. 7, p. 910, doi. 10.3390/mi15070910
- By:
- Publication type:
- Article
ENHANCING MILLING PERFORMANCE OF 6061 ALUMINUM ALLOY WITH NANOCUTTING FLUID AND MQL.
- Published in:
- Surface Review & Letters, 2024, v. 31, n. 7, p. 1, doi. 10.1142/S0218625X24500586
- By:
- Publication type:
- Article
Research on cutting lubrication performance of textured tools considering slip boundary conditions.
- Published in:
- Advances in Mechanical Engineering (Sage Publications Inc.), 2024, v. 16, n. 6, p. 1, doi. 10.1177/16878132241260025
- By:
- Publication type:
- Article
Effect of different base oils on the friction behaviour of polycrystalline diamond compact.
- Published in:
- Lubrication Science, 2024, v. 36, n. 4, p. 286, doi. 10.1002/ls.1692
- By:
- Publication type:
- Article
Surface Topography in Cutting-Speed-Direction Ultrasonic-Assisted Turning.
- Published in:
- Micromachines, 2024, v. 15, n. 6, p. 668, doi. 10.3390/mi15060668
- By:
- Publication type:
- Article
Development of an Intelligent Milling Tool System.
- Published in:
- Sensors & Materials, 2024, v. 36, n. 5, Part 3, p. 2075, doi. 10.18494/SAM4734
- By:
- Publication type:
- Article
INVESTIGATION OF FUNGICIDAL PROPERTIES OF HEXYL BROMIDE COMPLEX OF N'-(2,2-BITCYCLO[2.2.1]HEPT-5-EN-2-YL-4,5-DIHYDRO-1-H-IMIDAZOLIN-1- YLETHYL)ETHANE-1,2-DIAMINE AS ANTIMICROBIAL ADDITIVE TO LUBRICANTCOOLANT FLUIDS.
- Published in:
- Chemical Problems / Kimya Problemləri, 2024, v. 22, n. 2, p. 168, doi. 10.32737/2221-8688-2024-2-168-176
- By:
- Publication type:
- Article
Experimental Evaluation of Biolubricant with Additive Nanoparticle Calcium Carbonate (CaCO<sub>3</sub>) from Scallop Shell Waste as Cutting Fluids using Minimum Quantity Lubrication (MQL) in CNC Milling Process.
- Published in:
- FME Transactions, 2024, v. 52, n. 2, p. 319, doi. 10.5937/fme2402319P
- By:
- Publication type:
- Article
Intelligent prediction using AI-based modeling and optimization of surface roughness in Al7049 end milling with coconut oil under minimum quantity lubrication.
- Published in:
- Journal of Mechanical Science & Technology, 2024, v. 38, n. 4, p. 2005, doi. 10.1007/s12206-024-0332-5
- By:
- Publication type:
- Article
Ways to improve the efficiency of cleaning cutting fluids.
- Published in:
- Przegląd Elektrotechniczny, 2024, v. 2024, n. 4, p. 83, doi. 10.15199/48.2024.04.16
- By:
- Publication type:
- Article
Schey's Tribology in Metalworking--Friction, Lubrication, and Wear.
- Published in:
- 2024
- By:
- Publication type:
- Book Review
Investigation of the Combined Effects of Ultrasonic Vibration-Assisted Machining and Minimum Quantity Lubrication on Al7075-T6.
- Published in:
- Journal of Engineering (2314-4912), 2024, v. 2024, p. 1, doi. 10.1155/2024/6655471
- By:
- Publication type:
- Article
The Impact of a Movement Type on Tribological Properties of AlTiN Coating Deposited on HS6-5-2C Steel.
- Published in:
- Advances in Science & Technology Research Journal, 2024, v. 18, n. 2, p. 305, doi. 10.12913/22998624/185164
- By:
- Publication type:
- Article
Performance evaluation of hybrid biodegradable oils as a lubricant during cylindrical turning of AISI 304 austenitic stainless steel.
- Published in:
- AIMS Materials Science, 2024, v. 11, n. 2, p. 256, doi. 10.3934/matersci.2024015
- By:
- Publication type:
- Article
Temperature Analysis in Cubic Boron Nitrate Cutting Tool during Minimum Quantity Lubrication Turning with a Coconut-Oil-Based Nano-Cutting Fluid Using Computational Fluid Dynamics.
- Published in:
- Coatings (2079-6412), 2024, v. 14, n. 3, p. 340, doi. 10.3390/coatings14030340
- By:
- Publication type:
- Article
Properties of Diamond-like Tungsten-Doped Carbon Coatings Lubricated with Cutting Fluid.
- Published in:
- Coatings (2079-6412), 2024, v. 14, n. 3, p. 342, doi. 10.3390/coatings14030342
- By:
- Publication type:
- Article
Evaluating the Tribological Behaviour in Cutting Operations Using a Modified Ball-on-Disc Open Tribotester.
- Published in:
- Lubricants (2075-4442), 2024, v. 12, n. 3, p. 77, doi. 10.3390/lubricants12030077
- By:
- Publication type:
- Article
Multi-objective Optimization for Enhanced Material Removal Rate and Reduced Machining Roughness in Hard Turning of SKD61 Alloy Steel.
- Published in:
- Mathematical Modelling of Engineering Problems, 2024, v. 11, n. 3, p. 680, doi. 10.18280/mmep.110312
- By:
- Publication type:
- Article
The Engine Casing Machining Holes Repairing Based on Vibration Wire Feeding.
- Published in:
- Metals (2075-4701), 2024, v. 14, n. 3, p. 319, doi. 10.3390/met14030319
- By:
- Publication type:
- Article
Investigating Corrosion and Surface Hardness of Al6061 in Machining Fluids with Variable CNT Concentrations.
- Published in:
- Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2024, v. 34, n. 1, p. 9, doi. 10.18280/rcma.340102
- By:
- Publication type:
- Article
Influence of Cutting Fluids on the Mechanism of Self- Organization and Physical and Mechanical Properties of Wear-Resistant Ultra-Fine-Grained and Nanostructured Surface Friction Layers of Chromium Steels.
- Published in:
- Metallophysics & Advanced Technologies / Metallofizika i Novejsie Tehnologii, 2024, v. 46, n. 2, p. 151, doi. 10.15407/mfint.46.02.0151
- By:
- Publication type:
- Article
Investigation of the Effects of Cutting Fluid Application with Minimum Quantity Lubrication (MQL) Method on the Machinability of Pure Titanium.
- Published in:
- Sakarya University Journal of Science (SAUJS) / Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2024, v. 28, n. 1, p. 1, doi. 10.16984/saufenbilder.1331381
- By:
- Publication type:
- Article
Azelis opens application laboratory.
- Published in:
- Tribology & Lubrication Technology, 2024, v. 80, n. 2, p. 41
- Publication type:
- Article
Influence of Aluminium Oxide Nanoparticles Mass Concentrations on the Tool Wear Values During Turning of Titanium Alloy under Minimum Quantity Lubrication Conditions.
- Published in:
- Advances in Science & Technology Research Journal, 2024, v. 18, n. 1, p. 76, doi. 10.12913/22998624/175917
- By:
- Publication type:
- Article
Regression Analysis of Cutting Forces in Machining - Impact of Cutting Conditions and Fluids.
- Published in:
- International Journal of COMADEM, 2024, v. 27, n. 1, p. 31
- By:
- Publication type:
- Article
Influence of Austenite Stability on the Machinability of Different Grades of Austempered Ductile Iron (ADI) During Dry Turning Machining.
- Published in:
- International Journal of Metalcasting, 2024, v. 18, n. 1, p. 744, doi. 10.1007/s40962-023-01063-0
- By:
- Publication type:
- Article
Comparative Economic Analysis and Investigation of Micro Lubrication Over Conventional Cooling in Manufacturing.
- Published in:
- Journal of Engineering, Project & Production Management, 2024, v. 14, n. 1, p. 1, doi. 10.32738/JEPPM-2024-0004
- By:
- Publication type:
- Article
Investigation of the Titanium Alloy Turning Process with Prime A Tools under High-Pressure Cooling Conditions.
- Published in:
- Journal of Mechanical Engineering / Strojniški Vestnik, 2024, v. 70, n. 1/2, p. 70, doi. 10.5545/sv-jme.2023.718
- By:
- Publication type:
- Article
Investigation of the Reversal Loads in a Tapping Process.
- Published in:
- Technical Gazette / Tehnički Vjesnik, 2024, v. 31, n. 1, p. 280, doi. 10.17559/TV-20230525000669
- By:
- Publication type:
- Article
Sustainable utilization of the vegetable oil manufacturing waste product in the formulation of eco-friendly emulsifiable cutting fluids.
- Published in:
- Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-46768-8
- By:
- Publication type:
- Article
Corn Oil Biodiesel Dispersed with Nanopowder as Cutting Fluid in Metal Cutting Process on CNC Milling Machine.
- Published in:
- International Journal of Vehicle Structures & Systems (IJVSS), 2023, v. 15, n. 7, p. 989, doi. 10.4273/ijvss.15.7.23
- By:
- Publication type:
- Article
The Effect of Cellulose Nanocrystal-Based Nanofluid on Milling Performance: An Investigation of Dillimax 690T.
- Published in:
- Polymers (20734360), 2023, v. 15, n. 23, p. 4521, doi. 10.3390/polym15234521
- By:
- Publication type:
- Article
A comparative study of the selection of cutting fluids used in machining processes by multi criteria decision making (MCDM) methods.
- Published in:
- Sādhanā: Academy Proceedings in Engineering Sciences, 2023, v. 48, n. 4, p. 1, doi. 10.1007/s12046-023-02265-2
- By:
- Publication type:
- Article
Sterilization of Water-Based Cutting Fluids Using Compact Air-Cooled Coaxial Dielectric Barrier Discharge Reactor with Bubbler.
- Published in:
- Applied Sciences (2076-3417), 2023, v. 13, n. 22, p. 12302, doi. 10.3390/app132212302
- By:
- Publication type:
- Article
An Experimental Study on Ultrasonic Vibration-Assisted Turning of Aluminum Alloy 6061 with Vegetable Oil-Based Nanofluid Minimum Quantity Lubrication.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 11, p. 470, doi. 10.3390/lubricants11110470
- By:
- Publication type:
- Article
Enhancing the Performance of Rapeseed Oil Lubricant for Machinery Component Applications through Hybrid Blends of Nanoadditives.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 11, p. 479, doi. 10.3390/lubricants11110479
- By:
- Publication type:
- Article
Effects of the Electric Double Layer Characteristic and Electroosmotic Regulation on the Tribological Performance of Water-Based Cutting Fluids.
- Published in:
- Micromachines, 2023, v. 14, n. 11, p. 2029, doi. 10.3390/mi14112029
- By:
- Publication type:
- Article
A Review of the Settling Law of Drill Cuttings in Drilling Fluids.
- Published in:
- Processes, 2023, v. 11, n. 11, p. 3165, doi. 10.3390/pr11113165
- By:
- Publication type:
- Article
Investigation of sustainability and performance of Ag-coated CuO cutting fluid in grinding of Inconel 738.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 7/8, p. 3057, doi. 10.1007/s00170-023-12127-0
- By:
- Publication type:
- Article
Experimental investigation of cutting performance for circular saw blade body modification by resin layers toward green manufacturing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 7/8, p. 3105, doi. 10.1007/s00170-023-11979-w
- By:
- Publication type:
- Article
Exploring the Impact of the Turning of AISI 4340 Steel on Tool Wear, Surface Roughness, Sound Intensity, and Power Consumption under Dry, MQL, and Nano-MQL Conditions.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 10, p. 442, doi. 10.3390/lubricants11100442
- By:
- Publication type:
- Article
Review of Cutting Temperature Measurement Methods.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 19, p. 6365, doi. 10.3390/ma16196365
- By:
- Publication type:
- Article
Synthesis of Imidazole-Based Deep Eutectic Solvents as Solid Lubricants: Lubricated State Transition.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 19, p. 6579, doi. 10.3390/ma16196579
- By:
- Publication type:
- Article
Study of Machined Surface Quality of AZ31B Magnesium Alloy by End Milling.
- Published in:
- Metals (2075-4701), 2023, v. 13, n. 10, p. 1712, doi. 10.3390/met13101712
- By:
- Publication type:
- Article
An Experimental Investigation of the Effects of Dressing and Grinding Parameters on Sustainable Grinding of Inconel 738 Used for Automated Manufacturing.
- Published in:
- Processes, 2023, v. 11, n. 10, p. 2876, doi. 10.3390/pr11102876
- By:
- Publication type:
- Article
A Knowledge Push Approach to Support the Green Concept Design of Products.
- Published in:
- Processes, 2023, v. 11, n. 10, p. 2891, doi. 10.3390/pr11102891
- By:
- Publication type:
- Article