Works matching DE "CRACK propagation (Fracture mechanics)"
Results: 3725
Crack detection in ultrahigh-performance concrete using robust principal component analysis and characteristic evaluation in the frequency domain.
- Published in:
- Structural Health Monitoring, 2024, v. 23, n. 2, p. 1013, doi. 10.1177/14759217231178457
- By:
- Publication type:
- Article
Incremental learning BiLSTM based on dynamic proportional adjustment mechanism and experience replay for quantitative detection of blade crack propagation.
- Published in:
- Structural Health Monitoring, 2024, v. 23, n. 2, p. 733, doi. 10.1177/14759217231170723
- By:
- Publication type:
- Article
A novel data-based approach for monitoring fatigue crack propagation in welded joints under varying ambient temperature using the electromechanical admittance.
- Published in:
- Structural Health Monitoring, 2023, v. 22, n. 5, p. 3270, doi. 10.1177/14759217221123976
- By:
- Publication type:
- Article
Warped Gaussian processes for predicting the degradation of aerospace structures.
- Published in:
- Structural Health Monitoring, 2023, v. 22, n. 4, p. 2531, doi. 10.1177/14759217221127252
- By:
- Publication type:
- Article
A new GW-based heteroscedastic Gaussian process method for online crack evaluation.
- Published in:
- Structural Health Monitoring, 2022, v. 21, n. 6, p. 2874, doi. 10.1177/14759217221076740
- By:
- Publication type:
- Article
Inspection interval optimization of aircraft landing gear component based on risk assessment using equivalent initial flaw size distribution method.
- Published in:
- Structural Health Monitoring, 2022, v. 21, n. 4, p. 1396, doi. 10.1177/14759217211033625
- By:
- Publication type:
- Article
Development of an integrated sacrificial sensor for damage detection and monitoring in composite materials and adhesively bonded joints.
- Published in:
- Structural Health Monitoring, 2021, v. 20, n. 6, p. 3406, doi. 10.1177/1475921721989041
- By:
- Publication type:
- Article
Improved damage detection in Pelton turbines using optimized condition indicators and data-driven techniques.
- Published in:
- Structural Health Monitoring, 2021, v. 20, n. 6, p. 3239, doi. 10.1177/1475921720981839
- By:
- Publication type:
- Article
A hybrid prognosis model for predicting fatigue crack propagation under biaxial in-phase and out-of-phase loading.
- Published in:
- Structural Health Monitoring, 2018, v. 17, n. 4, p. 888, doi. 10.1177/1475921717725019
- By:
- Publication type:
- Article
Use of an elasto-plastic model and strain measurements of embedded fibre Bragg grating sensors to detect Mode I delamination crack propagation in woven cloth (0/90) composite materials.
- Published in:
- Structural Health Monitoring, 2018, v. 17, n. 2, p. 363, doi. 10.1177/1475921717694812
- By:
- Publication type:
- Article
A detection and classification approach for underwater dam cracks.
- Published in:
- Structural Health Monitoring, 2016, v. 15, n. 5, p. 541, doi. 10.1177/1475921716651039
- By:
- Publication type:
- Article
Online recursive estimation of remaining life using ultrasonic measurements.
- Published in:
- Structural Health Monitoring, 2012, v. 11, n. 4, p. 413, doi. 10.1177/1475921711432003
- By:
- Publication type:
- Article
Novel microbial synthesis of titania nanoparticles using probiotic Bacillus coagulans and its role in enhancing the microhardness of glass ionomer restorative materials.
- Published in:
- Odontology, 2024, v. 112, n. 4, p. 1123, doi. 10.1007/s10266-024-00921-5
- By:
- Publication type:
- Article
Residual Strength of Precast Steel-Free Panels.
- Published in:
- ACI Structural Journal, 2013, v. 110, n. 5, p. 715, doi. 10.14359/51685825
- By:
- Publication type:
- Article
Examples of applications of the peridynamic theory to the solution of static equilibrium problems.
- Published in:
- Aeronautical Journal, 2015, v. 119, n. 1216, p. 667, doi. 10.1017/S0001924000010770
- By:
- Publication type:
- Article
Comparison of erosion rate of EB-PVD and plasma sprayed TBC.
- Published in:
- Surface Engineering, 2021, v. 37, n. 11, p. 1396, doi. 10.1080/02670844.2021.1997251
- By:
- Publication type:
- Article
Crack resistance enhancement of gradient bias TiN/Ti multilayer coating by Ti sputtering.
- Published in:
- Surface Engineering, 2021, v. 37, n. 11, p. 1457, doi. 10.1080/02670844.2021.1973777
- By:
- Publication type:
- Article
The effect of saline environment on the fatigue behaviour of HVOF-sprayed WC-CrC-Ni coatings.
- Published in:
- Surface Engineering, 2018, v. 34, n. 10, p. 755, doi. 10.1080/02670844.2017.1388561
- By:
- Publication type:
- Article
Fatigue strength of USP treated ASTM CA6NM for hydraulic turbine runner.
- Published in:
- Surface Engineering, 2014, v. 30, n. 9, p. 662, doi. 10.1179/1743294414Y.0000000308
- By:
- Publication type:
- Article
Prediction of Crack Toughness of Rubber Under Impact Loading Conditions.
- Published in:
- Macromolecular Symposia, 2017, v. 373, n. 1, p. n/a, doi. 10.1002/masy.201600124
- By:
- Publication type:
- Article
Atomic-Force Microscopy Investigations on Fracture Surfaces of Inorganic, Fullerene-Like WS<sub>2</sub> (IF-WS<sub>2</sub>)-epoxy Nanocomposites.
- Published in:
- Macromolecular Symposia, 2017, v. 373, n. 1, p. n/a, doi. 10.1002/masy.201600127
- By:
- Publication type:
- Article
Experimental Investigation of Dynamic Fracture Behaviors of Polymethyl Methacrylate.
- Published in:
- Macromolecular Symposia, 2016, v. 365, n. 1, p. 180, doi. 10.1002/masy.201650029
- By:
- Publication type:
- Article
Mechanical Behaviors of Rice Husk and Boiled Egg Shell Particles Impregnated Coir-Polyester Composites.
- Published in:
- Macromolecular Symposia, 2016, v. 361, n. 1, p. 136, doi. 10.1002/masy.201400245
- By:
- Publication type:
- Article
Prediction of Water Inrush from Coal Seam Floors Based on the Effective Barrier Thickness.
- Published in:
- Mine Water & the Environment, 2022, v. 41, n. 1, p. 168, doi. 10.1007/s10230-022-00846-x
- By:
- Publication type:
- Article
Comparative investigation of the stretch-flange cracking mechanism of ultrahigh-strength steels with different microstructures and hole-expansion ratios.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 9/10, p. 4437, doi. 10.1007/s00170-024-14776-1
- By:
- Publication type:
- Article
Microwave thermal stress method cutting Al<sub>2</sub>O<sub>3</sub> ceramics: modeling and experiments.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 7/8, p. 3379, doi. 10.1007/s00170-024-14411-z
- By:
- Publication type:
- Article
The effects of tool geometry on static strength and the failure mode in micro-friction stir spot welding.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 5/6, p. 2697, doi. 10.1007/s00170-024-14639-9
- By:
- Publication type:
- Article
Relationship between surface roughness and subsurface crack damage depth of sapphire crystals cut by diamond wire saw based on slicing experiments.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 11/12, p. 5907, doi. 10.1007/s00170-024-14571-y
- By:
- Publication type:
- Article
Discrete element method to study the subsurface crack propagation trend during vertical ultrasonic vibratory cutting of sapphire.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 5/6, p. 2513, doi. 10.1007/s00170-024-14199-y
- By:
- Publication type:
- Article
Influence of laser beam process parameters on the bending ability of Ti-6Al-4V titanium alloy sheets.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3445, doi. 10.1007/s00170-024-13903-2
- By:
- Publication type:
- Article
Development of an efficient multi-scale model to predict residual stresses and distortions in the laser powder bed fusion process for Inconel-718.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 9/10, p. 5111, doi. 10.1007/s00170-024-13348-7
- By:
- Publication type:
- Article
Study of longitudinal-torsional ultrasonic-assisted vibration on micro-hole drilling Zr-based metallic glass.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 5/6, p. 2893, doi. 10.1007/s00170-023-12649-7
- By:
- Publication type:
- Article
Edge breakage mechanism of optical glass surface in ultrasonic vibration-assisted milling.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 5/6, p. 2265, doi. 10.1007/s00170-023-11093-x
- By:
- Publication type:
- Article
Enhancement of strength and ductility in LPBFed Cu-Cr-Zr alloy by combined parametric approach.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 5/6, p. 2999, doi. 10.1007/s00170-023-12874-0
- By:
- Publication type:
- Article
Dynamic evolution behavior of cracks for single-track and multi-track clads in laser cladding.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 5/6, p. 2313, doi. 10.1007/s00170-023-12766-3
- By:
- Publication type:
- Article
An investigation on cutting mechanism and thermomechanical behaviors at tool-chip interface in ultrasonic vibration–assisted cutting of Ti6Al4V alloy.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 7/8, p. 3027, doi. 10.1007/s00170-023-12430-w
- By:
- Publication type:
- Article
Tool failure mechanisms and cutting performance analysis during high-feed milling of 508-III steel.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 9/10, p. 3921, doi. 10.1007/s00170-023-12045-1
- By:
- Publication type:
- Article
Susceptibility of adiabatic shear band formation in AZ31B magnesium alloy during high strain rate impact.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 5/6, p. 2161, doi. 10.1007/s00170-023-12049-x
- By:
- Publication type:
- Article
Study on the unstable crack propagation mechanism in turning machinable ceramics based on the energy conversion principle and the fracture mechanics theory.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 9/10, p. 4591, doi. 10.1007/s00170-023-11817-z
- By:
- Publication type:
- Article
Effect of crack propagation on surface formation mechanism and surface morphology evaluation of longitudinal–torsional composite ultrasonic mill grinding of Si<sub>3</sub>N<sub>4</sub>.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 11/12, p. 5101, doi. 10.1007/s00170-023-11066-0
- By:
- Publication type:
- Article
A cutting force theoretical model under the wear effect in turning glass–ceramics.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 11/12, p. 5295, doi. 10.1007/s00170-023-10829-z
- By:
- Publication type:
- Article
Towards understanding the material removal mechanism in multi-tooth milling of 2.5D C/SiC composites: numerical modeling and experimental study.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 9/10, p. 4163, doi. 10.1007/s00170-023-10999-w
- By:
- Publication type:
- Article
The investigation of fracture characteristics and process optimization of low-cycle fatigue cropping by using an AET-based multi-sensor system.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 3/4, p. 1371, doi. 10.1007/s00170-022-10696-0
- By:
- Publication type:
- Article
Microstructural evolution and properties of cemented carbides alloyed with hexagonal boron nitride (h-BN) using selective laser melting.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 9/10, p. 3647, doi. 10.1007/s00170-022-10047-z
- By:
- Publication type:
- Article
Investigation of dynamic fracture toughness on zirconia ceramic grinding performance with different grain sizes.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 7/8, p. 5549, doi. 10.1007/s00170-022-09743-7
- By:
- Publication type:
- Article
Pin length, pin offset, and reversed metal flow interaction in the improvement of dissimilar friction stir welded T-lap joints.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 7/8, p. 4677, doi. 10.1007/s00170-022-09629-8
- By:
- Publication type:
- Article
Research on the reasonable loading method of staged follow-up rolling in low-stress cropping.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 11/12, p. 8133, doi. 10.1007/s00170-022-09180-6
- By:
- Publication type:
- Article
Effect mechanism of plain-woven structure of carbon fiber on CFRP cutting.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 5/6, p. 3223, doi. 10.1007/s00170-021-08470-9
- By:
- Publication type:
- Article
Effect of cutting parameters on chips and burrs formation with traditional micromilling and ultrasonic vibration assisted micromilling.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 3/4, p. 2615, doi. 10.1007/s00170-021-08468-3
- By:
- Publication type:
- Article
Research on breakage characteristics in side milling of titanium alloy with cemented carbide end mill.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 11/12, p. 3661, doi. 10.1007/s00170-021-07938-y
- By:
- Publication type:
- Article