Works matching DE "COPPER powder"

Results: 659

Preparation of Spherical Porous and Spherical Ti6Al4V Powder by Copper-Assisted Spheroidization Method.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 3, p. 1276, doi. 10.1007/s11837-023-06295-3

By:

Qian, Jin;
Zhang, Li;
Tang, Shaolong

Publication type:

Article

Study on the Permeability and Mechanical Properties of Copper Powder/Mesh Porous Plates.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2024, v. 76, n. 3, p. 1235, doi. 10.1007/s11837-023-06273-9

By:

Chen, Yingmao;
Zhou, Zhaoyao

Publication type:

Article

Investigation of the Induction Heating Phenomenon of Sintered Coatings with Copper Powders.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2023, v. 75, n. 6, p. 1800, doi. 10.1007/s11837-023-05782-x

By:

Li, Da;
Wei, Junning;
Zheng, Huaqiang;
Sun, Guoli;
Wang, Shuangxi

Publication type:

Article

Thermodynamics and Synthesis of Cu Powder from CuO in Waste Tire-Derived Pyrolytic Gas Atmosphere.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 4, p. 1004, doi. 10.1007/s11837-020-04498-6

By:

Cumbul Altay, M.;
Eroglu, S.

Publication type:

Article

A Study of Selenium and Tellurium Distribution Behavior, Taking the Copper Matte Flash Converting Process as the Background.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2021, v. 73, n. 2, p. 694, doi. 10.1007/s11837-020-04517-6

By:

Yu, Feng;
Liu, Zhihong;
Ye, Fengchun;
Xia, Longgong;
Jokilaakso, Ari

Publication type:

Article

Effects of Applied Pressure on the Atomic Diffusion Coefficient During Spark Plasma Sintering of Crystalline Powders.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2019, v. 71, n. 8, p. 2475, doi. 10.1007/s11837-019-03393-z

By:

Li, Xinxin;
Yang, Chao;
Liu, Zhao;
Zou, Liming;
Wang, Zhi;
Zhang, Weiwen

Publication type:

Article

Experimental and Numerical Investigation of Process Parameters on the Residual Stresses in the Al-Cu FGM Materials.

Published in:

Experimental Techniques, 2021, v. 45, n. 5, p. 601, doi. 10.1007/s40799-021-00444-6

By:

Gheysarian, A.;
Honarpisheh, M.

Publication type:

Article

Dual solutions of ternary hybrid nanofluids stagnation point over a linearly stretching/shrinking sheet.

Published in:

Journal of Thermal Analysis & Calorimetry, 2025, v. 150, n. 14, p. 11265, doi. 10.1007/s10973-025-14195-8

By:

Revnic, C.;
Grosan, T.;
Pop, I.

Publication type:

Article

TG-MS study on the activity of Fe, Co, Ni, Cu, and Zn nanometal catalysts on thermal decomposition of ammonium perchlorate.

Published in:

Journal of Thermal Analysis & Calorimetry, 2023, v. 148, n. 19, p. 10065, doi. 10.1007/s10973-023-12386-9

By:

Chandrababu, Parvathy;
Beena, Sreeja;
Thomas, Deepthi;
Thankarajan, Jayalatha;
Sukumaran Nair, Vishnu;
Raghavan, Rajeev

Publication type:

Article

Experimental study on hydraulic and thermal characteristics of composite porous wick with spherical–dendritic powders.

Published in:

Journal of Thermal Analysis & Calorimetry, 2020, v. 141, n. 1, p. 107, doi. 10.1007/s10973-019-08920-3

By:

Wang, Dongdong;
Wang, Jinxin;
Bao, Xiangjun;
Chen, Guang;
Chu, Huaqiang

Publication type:

Article

Nanostructured AgCu system at repeated melting: Structure and thermal behavior.

Published in:

Journal of Thermal Analysis & Calorimetry, 2019, v. 138, n. 4, p. 2923, doi. 10.1007/s10973-019-08566-1

By:

Gingu, Oana;
Tanasescu, Speranta;
Stoian, George;
Lupu, Nicoleta;
Rotaru, Petre

Publication type:

Article

Research on the enhancement of densification and electrical conductivity of silver-coated copper conductive films via oxidation–reduction sintering method.

Published in:

Journal of Materials Science, 2025, v. 60, n. 7, p. 3392, doi. 10.1007/s10853-025-10638-7

By:

Wang, Xuewen;
Zhao, Jie;
Shi, Qingwen;
Li, Peibo;
Luo, Guoqiang;
Shen, Qiang;
Sun, Yi

Publication type:

Article

Synthesis and characterization of homogeneously dispersed graphene–copper heterostructures with enhanced thermal properties.

Published in:

Journal of Materials Science, 2024, v. 59, n. 1, p. 105, doi. 10.1007/s10853-023-09188-7

By:

Cakir, Deniz;
Caylan, Omer R.;
Cambaz Buke, Goknur

Publication type:

Article

Ionic thermoelectric effect in Cu2-δSe during phase transition.

Published in:

Journal of Materials Science, 2023, v. 58, n. 44, p. 17034, doi. 10.1007/s10853-023-09107-w

By:

Trawiński, Bartosz

Publication type:

Article

Interfacial bonding characteristics of in situ synthesized graphene-coated copper nanocomposite powders using wheat flour precursor.

Published in:

Journal of Materials Science, 2022, v. 57, n. 41, p. 19309, doi. 10.1007/s10853-022-07821-5

By:

Yang, Tao;
Chen, Wenge;
Zhang, Hui;
Fu, Yong-Qing

Publication type:

Article

Machine learning‐based analysis and prediction of the interfacial corrosion processes of copper cathode plates during the electrolytic production of copper powders.

Published in:

Materials & Corrosion / Werkstoffe und Korrosion, 2022, v. 73, n. 5, p. 811, doi. 10.1002/maco.202112977

By:

Zhou, Youzhi;
Lin, Pengcheng;
Ke, Xin;
Hu, Qiang;
Shi, Qi;
Zhang, Jingguo;
Wang, Zhong;
Wang, Limin

Publication type:

Article

NHC Polymeric Particles Obtained by Self-Assembly and Click Approach of Calix[4]Arene Amphiphiles as Support for Catalytically Active Pd Nanoclusters.

Published in:

Molecules, 2021, v. 26, n. 22, p. 6864, doi. 10.3390/molecules26226864

By:

Burilov, Vladimir;
Mironova, Diana;
Sultanova, Elsa;
Garipova, Ramila;
Evtugyn, Vladimir;
Solovieva, Svetlana;
Antipin, Igor

Publication type:

Article

Laser Activated and Electroless Metalized Polyurethane Coatings Containing Copper(II) L-Tyrosine and Glass Microspheres.

Published in:

Molecules, 2021, v. 26, n. 18, p. 5571, doi. 10.3390/molecules26185571

By:

Rytlewski, Piotr;
Jagodziński, Bartłomiej;
Malinowski, Rafał;
Budner, Bogusław;
Moraczewski, Krzysztof;
Wojciechowska, Agnieszka;
Augustyn, Piotr

Publication type:

Article

Solution/Ammonolysis Syntheses of Unsupported and Silica-Supported Copper(I) Nitride Nanostructures from Oxidic Precursors.

Published in:

Molecules, 2021, v. 26, n. 16, p. 4926, doi. 10.3390/molecules26164926

By:

Szczęsny, Robert;
Hoang, Tuan K. A.;
Dobrzańska, Liliana;
Gregory, Duncan H.

Publication type:

Article

Development of a Simple Reversible-Flow Method for Preparation of Micron-Size Chitosan-Cu(II) Catalyst Particles and Their Testing of Activity.

Published in:

Molecules, 2020, v. 25, n. 8, p. 1798, doi. 10.3390/molecules25081798

By:

Intanin, Apichai;
Inpota, Prawpan;
Chutimasakul, Threeraphat;
Tantirungrotechai, Jonggol;
Wilairat, Prapin;
Chantiwas, Rattikan;
Koscielniak, Pawel

Publication type:

Article

Process of Sintering Iron-Based Powder Materials Alloyed with Copper with Introduction of Various Plasticizers Into an Initial Charge.

Published in:

Metallurgist, 2024, v. 67, n. 9/10, p. 1315, doi. 10.1007/s11015-024-01623-7

By:

Eremeeva, J. V.;
Ter-Vaganyants, Y. S.;
Korznikov, O. V.

Publication type:

Article

Investigation of Influence of Various Plasticizers and Alloying Additives on Technological Properties of Powder Mixture of Steel SP35G2N4D2M.

Published in:

Metallurgist, 2022, v. 66, n. 7/8, p. 837, doi. 10.1007/s11015-022-01395-y

By:

Еremeeva, Jh. V.;
Ter-Vaganyants, Y. S.;
Sharipzyanova, G. H.;
Korznikov, O. V.;
Nitkin, N. M.

Publication type:

Article

Structure and Properties of Surface Layers Obtained Via Nonvacuum Electron-Beam Cladding with Copper and Boron Powder Mixtures.

Published in:

Metallurgist, 2022, v. 65, n. 11/12, p. 1281, doi. 10.1007/s11015-022-01274-6

By:

Emurlaev, K. I.;
Golkovsky, M. G.;
Stepanova, N. V.;
Bataeva, Z. B.

Publication type:

Article

Features of Structural Formation in a Cu–Al Powder System.

Published in:

Metallurgist, 2021, v. 64, n. 11/12, p. 1307, doi. 10.1007/s11015-021-01120-1

By:

Yagubov, E. K.

Publication type:

Article

Synthesis and antimicrobial studies of new pyridine derivatives.

Published in:

Chemistry of Heterocyclic Compounds, 2009, v. 45, n. 11, p. 1343, doi. 10.1007/s10593-010-0432-2

By:

Patel, N. B.;
Agravat, S. N.

Publication type:

Article

Features of Ignition of Thermite Mixture Al/CuO by Electric Discharge.

Published in:

Theoretical Foundations of Chemical Engineering, 2024, v. 58, n. 3, p. 936, doi. 10.1134/S0040579524601675

By:

Yankovskii, B. D.;
Arsenov, P. A.;
Dolgoborodov, A. Yu.;
Vakorina, G. S.;
Valyano, G. E.

Publication type:

Article

Análisis comparativo de piñones de cadena de distribución económicos y de alta performance.

Published in:

Remetallica, 2023, v. 38, n. 26, p. 13

By:

Pablo Vergara-Meruane, Juan

Publication type:

Article

五水硫酸铜晶体的制备及表征实验方法的优化.

Published in:

Chinese Journal of Applied Chemistry, 2025, v. 42, n. 3, p. 416, doi. 10.19894/j.issn.1000-0518.240177

By:

杜意恩;
郭少华;
张爱华

Publication type:

Article

3D metal printed slot antenna array with high gain and enhanced bandwidth using triple‐mode sine corrugated cavity resonator.

Published in:

IET Microwaves, Antennas & Propagation (Wiley-Blackwell), 2023, v. 17, n. 13, p. 982, doi. 10.1049/mia2.12410

By:

Rao, Jiayu;
Nai, Kenneth;
Vaitukaitis, Povilas;
Li, Yuepei;
Hong, Jiasheng

Publication type:

Article

Control and Removal of Tellurium in Copper Electrolysis Process.

Published in:

Nonferrous Metals (Extractive Metallurgy), 2025, n. 3, p. 38, doi. 10.20237/j.issn.1007-7545.2025.03.005

By:

MU Yaling;
ZENG Wenbin;
WANG Shijiang;
XU Gangfang;
QIN shuchen;
NIU Li

Publication type:

Article

基于原位体积加成制备导电线路的研究.

Published in:

Imaging Science & Photochemistry, 2019, v. 37, n. 1, p. 33, doi. 10.7517/issn.1674-0475.180902

By:

武倩;
朱晓群;
聂俊

Publication type:

Article

Low-perchlorate blue-flame pyrotechnic compositions.

Published in:

Zeitschrift für Naturforschung B: A Journal of Chemical Sciences, 2021, v. 76, n. 9, p. 489, doi. 10.1515/znb-2021-0088

By:

Juknelevicius, Dominykas;
Webb, Rutger;
Klapötke, Thomas M.;
Ramanavicius, Arunas

Publication type:

Article

X-Ray Luminescence of ZnO Tetrapods Grown in the Presence of Copper and Gold Admixtures in Initial Charge.

Published in:

Optics & Spectroscopy, 2020, v. 128, n. 11, p. 1784, doi. 10.1134/S0030400X20110272

By:

Venevtsev, I. D.;
Muslimov, A. E.;
Zadorozhnaya, L. A.;
Lavrikov, A. S.;
Rodnyi, P. A.;
Kanevsky, V. M.

Publication type:

Article

ELECTRODEPOSITION OF Sn--Co POWDERS IN A GLUCONATE-GLYCINATE ELECTROLYTE.

Published in:

Oxidation Communications, 2023, v. 46, n. 3, p. 695

By:

IGNATOVA, K.

Publication type:

Article

DOE-based experimental investigation and optimization of hardness and corrosion rate for Cu-x%Al2O3 as processed by powder metallurgy.

Published in:

AIMS Materials Science, 2021, v. 8, n. 3, p. 416, doi. 10.3934/matersci.2021026

By:

Bataineh, Omar;
Al-Dwairi, Abdullah F.;
Ayoub, Zaid;
Al-Omosh, Mohammad

Publication type:

Article

Production of thin copper oxide films and its electronic density.

Published in:

AIMS Materials Science, 2019, v. 6, n. 3, p. 454, doi. 10.3934/matersci.2019.3.454

By:

Iskakova, Kulpash;
Akhmaltdinov, Rif;
Mamyrbayev, Orken

Publication type:

Article

Durability and Microstructural Analysis of Mortar Incorporating Glass Powder and Copper Slag.

Published in:

Jordan Journal of Civil Engineering, 2025, v. 19, n. 2, p. 179, doi. 10.14525/JJCE.v19i2.01

By:

Bhargava, Shruti;
Jain, Kishan Lal;
Ramana, P. V.;
Sharma, Dinesh Kumar

Publication type:

Article

Effects of Fungicides on Fungal Development, Conidiophore Morphology, and Conidial Releases from Single Strawberry Powdery Mildew Colonies Assessed Using an Electrostatic Technique.

Published in:

Agronomy, 2024, v. 14, n. 7, p. 1357, doi. 10.3390/agronomy14071357

By:

Takahara, Ami;
Asano, Shunsuke;
Kurokawa, Minami;
Shibata, Kanon;
Muto, Rina;
Nonomura, Teruo

Publication type:

Article

Electromagnetic Properties in Nanostructured Alloy Cu70Co30 Obtained by a Non-Equilibrium Method.

Published in:

Acta Physica Polonica: A, 2016, v. 130, n. 1, p. 112, doi. 10.12693/APhysPolA.130.112

By:

LASLOUNI, W.;
AZZAZ, M.

Publication type:

Article

Wear properties of copper and copper composites powders consolidated by high-pressure torsion.

Published in:

Friction (2223-7704), 2020, v. 8, n. 2, p. 433, doi. 10.1007/s40544-019-0285-3

By:

Abd El Aal, Mohamed Ibrahim

Publication type:

Article

Exhibitor Showcase.

Published in:: International Journal of Powder Metallurgy, 2025, v. 61, n. 2, p. 17
Publication type:: Article

MECHANICAL AND DYNAMIC PROPERTIES OF SUSTAINABLE POWDER METALLURGY ALLOY FL-5008.

Published in:

International Journal of Powder Metallurgy, 2025, v. 61, n. 2, p. 27

By:

Warzel III, Roland T.;
Tims, Amber;
Bo Hu;
Andersson, Michael

Publication type:

Article

Exhibitor Showcase.

Published in:: International Journal of Powder Metallurgy, 2023, v. 59, n. 2, p. 19
Publication type:: Article

ATOMIZATION FOR PM--PAST, PRESENT AND FUTURE.

Published in:

International Journal of Powder Metallurgy, 2022, v. 58, n. 3, p. 33

By:

Dunkley, John J.

Publication type:

Article

STATE OF THE PM INDUSTRY IN NORTH AMERICA--2022.

Published in:

International Journal of Powder Metallurgy, 2022, v. 58, n. 3, p. 29

By:

Brennen, Rodney

Publication type:

Article

STATE OF THE PM INDUSTRY IN NORTH AMERICA--2019.

Published in:

International Journal of Powder Metallurgy, 2019, v. 55, n. 3, p. 25

By:

Sweet, John F.

Publication type:

Article

PIERRE W. TAUBENBLAT, FAPMI, FASM.

Published in:: 2010
Publication type:: Question & Answer

PM INDUSTRY NEWS IN REVIEW.

Published in:: International Journal of Powder Metallurgy, 2009, v. 45, n. 5, p. 4
Publication type:: Article

METAL POWDER INJECTION MOLDING OF COPPER AND COPPER ALLOYS FOR MICROELECTRONIC HEAT DISSIPATION.

Published in:

International Journal of Powder Metallurgy, 2007, v. 43, n. 5, p. 55

By:

German, Randall M.;
Johnson, John L.

Publication type:

Article

ELECTRONIC APPLICATIONS FOR COPPER POWDER.

Published in:

International Journal of Powder Metallurgy, 2007, v. 43, n. 5, p. 31

By:

Shields Jr, John A.;
Smid, Ivi

Publication type:

Article