Works matching DE "COMPLIANT platforms"

Results: 145

Plasticity-mediated deformation instabilities in thin film-compliant substrate systems: direct three-dimensional simulations.

Published in:

Journal of Materials Science, 2024, v. 59, n. 12, p. 4882, doi. 10.1007/s10853-023-09248-y

By:

Nikravesh, Siavash;
Shen, Yu-Lin

Publication type:

Article

A compact adjustable hydraulic damper with symmetric high load behavior enabled by selective laser melting.

Published in:

Journal of Low Frequency Noise, Vibration & Active Control, 2023, v. 42, n. 4, p. 1699, doi. 10.1177/14613484231181864

By:

Heyden, Emil;
Hofmann, Urs;
Meboldt, Mirko;
Krause, Dieter

Publication type:

Article

Development and design of the Hantavirus registry - HantaReg - for epidemiological studies, outbreaks and clinical studies on hantavirus disease.

Published in:

Clinical Kidney Journal, 2021, v. 14, n. 11, p. 2365, doi. 10.1093/ckj/sfab053

By:

Koehler, Felix C;
Blomberg, Linda;
Brehm, Thomas Theo;
Büttner, Stefan;
Cornely, Oliver A;
Degen, Olaf;
Cristanziano, Veronica Di;
Dolff, Sebastian;
Eberwein, Lukas;
Hoxha, Elion;
Hoyer-Allo, K Johanna R;
Rudolf, Sarah;
Späth, Martin R;
Wanken, Manuel;
Müller, Roman-Ulrich;
Burst, Volker

Publication type:

Article

Conceptual Design of Compliant Structures for Morphing Wingtips Using Single-Row Corrugated Panels.

Published in:

Aerospace (MDPI Publishing), 2024, v. 11, n. 8, p. 682, doi. 10.3390/aerospace11080682

By:

He, Ziyi;
Fan, Siyun;
Wang, Chen;
Li, Songqi;
Zhao, Yan;
Shen, Xing;
Zhang, Jiaying

Publication type:

Article

Development of a High-Performance Low-Weight Hydraulic Damper for Active Vibration Control of the Main Rotor on Helicopters—Part 1: Design and Mathematical Model.

Published in:

Aerospace (MDPI Publishing), 2023, v. 10, n. 5, p. 391, doi. 10.3390/aerospace10050391

By:

Bertolino, Antonio Carlo;
Gaidano, Matteo;
Smorto, Stefano;
Porro, Paolo Giovanni;
Sorli, Massimo

Publication type:

Article

Wind Tunnel Tests of 3D-Printed Variable Camber Morphing Wing.

Published in:

Aerospace (MDPI Publishing), 2022, v. 9, n. 11, p. 699, doi. 10.3390/aerospace9110699

By:

Jia, Sijia;
Zhang, Zhenkai;
Zhang, Haibo;
Song, Chen;
Yang, Chao

Publication type:

Article

Multi-Mode Shape Control of Active Compliant Aerospace Structures Using Anisotropic Piezocomposite Materials in Antisymmetric Bimorph Configuration.

Published in:

Aerospace (MDPI Publishing), 2022, v. 9, n. 4, p. N.PAG, doi. 10.3390/aerospace9040195

By:

Wang, Xiaoming;
Hu, Xinhan;
Huang, Chengbin;
Zhou, Wenya

Publication type:

Article

Security and trust preserving inter‐ and intra‐cloud VM migrations.

Published in:

International Journal of Network Management, 2021, v. 31, n. 2, p. 1, doi. 10.1002/nem.2103

By:

Aslam, Mudassar;
Bouget, Simon;
Raza, Shahid

Publication type:

Article

Integrating subject-specific workspace constraint and performance-based control strategy in robot-assisted rehabilitation.

Published in:

Frontiers in Neuroscience, 2024, p. 1, doi. 10.3389/fnins.2024.1473755

By:

Miao, Qing;
Min, Song;
Wang, Cui;
Chen, Yi-Feng

Publication type:

Article

Research on effects of different internal structures on the grasping performance of Fin Ray soft grippers.

Published in:

Robotica, 2023, v. 41, n. 6, p. 1762, doi. 10.1017/S0263574723000139

By:

Yao, Jiaqiang;
Fang, Yuefa;
Li, Luquan

Publication type:

Article

A caterpillar climbing robot with spine claws and compliant structural modules.

Published in:

Robotica, 2016, v. 34, n. 7, p. 1553, doi. 10.1017/S0263574714002446

By:

Wang, Wei;
Wu, Shilin

Publication type:

Article

A new service for computing Sentinel-1 InSAR interferograms using NSBAS.

Published in:

Geophysical Research Abstracts, 2019, v. 21, p. 1

By:

Deschamps-Ostanciaux, Emilie;
Thollard, Franck;
Monasson, Sandrine;
Pointal, Elisabeth;
Laurent, Christophe;
Doin, Marie-Pierre;
Pathier, Erwan;
Pinel, Virginie;
Lasserre, Cécile;
Grandin, Raphaël;
DIament, Michel

Publication type:

Article

Treating Insomnia during the COVID-19 Pandemic: Observations and Perspectives from a Behavioral Sleep Medicine Clinic.

Published in:

Behavioral Sleep Medicine, 2020, v. 18, n. 4, p. 573, doi. 10.1080/15402002.2020.1765781

By:

Simpson, Norah;
Manber, Rachel

Publication type:

Article

Confidence bounds on structural reliability estimations for offshore platforms.

Published in:

Journal of Marine Science & Technology, 2008, v. 13, n. 3, p. 308, doi. 10.1007/s00773-008-0019-0

By:

D. De Leon;
A. Ang

Publication type:

Article

机器人变阻尼柔顺驱动关节设计.

Published in:

Journal of Tiangong University, 2019, v. 38, n. 5, p. 76, doi. 10.3969/j.issn.l671-024x.2019.05.013

By:

冯志友;
许文斌;
智德;
康荣杰;
陈丽莎

Publication type:

Article

COMPARATIVE SECURITY AND COMPLIANCE ANALYSIS OF SERVERLESS COMPUTING PLATFORMS: AWS LAMBDA, AZURE FUNCTIONS, AND GOOGLE CLOUD FUNCTIONS.

Published in:

i-Manager's Journal On Cloud Computing, 2024, v. 11, n. 1, p. 36, doi. 10.26634/jcc.11.1.21044

By:

KHANAL, DIBYA DARSHAN;
MAHARJAN, SUSHIL

Publication type:

Article

MOLECULAR, HISTOPATHOLOGICAL AND ULTRASTRUCTURAL STUDIES OF LANGENDORFF RAT HEART. THE IMPACT OF ISCHEMIC PRECONDITIONING.

Published in:

Scientific Papers. Series D. Animal Science, 2019, v. 62, n. 1, p. 179

By:

REVNIC, Cristian Romeo;
REVNIC, Flory;
VOINEA, Silviu

Publication type:

Article

Robotic locomotion through active and passive morphological adaptation in extreme outdoor environments.

Published in:

Science Robotics, 2025, v. 10, n. 99, p. 1, doi. 10.1126/scirobotics.adp6419

By:

Polzin, Max;
Guan, Qinghua;
Hughes, Josie

Publication type:

Article

双向驱动的柔顺结构微动平台的设计与测试.

Published in:

Piezoelectrics & Acoustooptics, 2020, v. 42, n. 2, p. 252, doi. 10.11977/j.issn.1004?2474.2020.02.024

By:

罗展鹏;
李国平;
韩同鹏;
杨依领;
赖文锋

Publication type:

Article

Seismic Performance and Sustainability of Reinforced Concrete Buildings: a Comprehensive Assessment.

Published in:

CET Journal - Chemical Engineering Transactions, 2024, v. 114, p. 781, doi. 10.3303/CET24114131

By:

Silitonga, Samuel Alexandro;
Bektaş, Nurullah

Publication type:

Article

A Novel Discrete Wire-Driven Continuum Robot Arm with Passive Sliding Disc: Design, Kinematics and Passive Tension Control.

Published in:

Robotics, 2019, v. 8, n. 3, p. 51, doi. 10.3390/robotics8030051

By:

Yeshmukhametov, Azamat;
Koganezawa, Koichi;
Yamamoto, Yoshio

Publication type:

Article

A Modified Asymmetric Bouc–Wen Model-Based Decoupling Control of an XY Piezoactuated Compliant Platform with Coupled Hysteresis Characteristics.

Published in:

Shock & Vibration, 2020, p. 1, doi. 10.1155/2020/6637282

By:

Zhou, Xubin;
Chen, Weidong;
Xiao, Qing;
Kong, Xiangsen;
Liu, Xingtian;
Zhou, Liping;
Dong, Yichong;
Zhang, Quan

Publication type:

Article

ECMM CandiReg—A ready to use platform for outbreaks and epidemiological studies.

Published in:

Mycoses, 2019, v. 62, n. 10, p. 920, doi. 10.1111/myc.12963

By:

Koehler, Philipp;
Arendrup, Maiken Cavling;
Arikan‐Akdagli, Sevtap;
Bassetti, Matteo;
Bretagne, Stéphane;
Klingspor, Lena;
Lagrou, Katrien;
Meis, Jacques F.;
Rautemaa‐Richardson, Riina;
Schelenz, Silke;
Hamprecht, Axel;
Koehler, Felix C.;
Kurzai, Oliver;
Salmanton‐García, Jon;
Vehreschild, Jörg‐Janne;
Alanio, Alexandre;
Alastruey‐Izquierdo, Ana;
Arsic Arsenijevic, Valentina;
Gangneux, Jean‐Pierre;
Gow, Neil A. R.

Publication type:

Article

Curing spurious magneto‐mechanical coupling in soft non‐magnetic materials.

Published in:

International Journal for Numerical Methods in Engineering, 2023, v. 124, n. 10, p. 2261, doi. 10.1002/nme.7210

By:

Rambausek, Matthias;
Schöberl, Joachim

Publication type:

Article

On topology optimization of design‐dependent pressure‐loaded three‐dimensional structures and compliant mechanisms.

Published in:

2021

By:

Kumar, Prabhat;
Langelaar, Matthijs

Publication type:

Correction Notice

On topology optimization of design‐dependent pressure‐loaded three‐dimensional structures and compliant mechanisms.

Published in:

International Journal for Numerical Methods in Engineering, 2021, v. 122, n. 9, p. 2205, doi. 10.1002/nme.6618

By:

Kumar, Prabhat;
Langelaar, Matthijs

Publication type:

Article

A variational formulation for motion design of adaptive compliant structures.

Published in:

International Journal for Numerical Methods in Engineering, 2021, v. 122, n. 4, p. 972, doi. 10.1002/nme.6570

By:

Sachse, Renate;
Bischoff, Manfred

Publication type:

Article

Surfactant-Mediated Airway and Acinar Interactions in a Multi-Scale Model of a Healthy Lung.

Published in:

Frontiers in Physiology, 2020, v. 11, p. N.PAG, doi. 10.3389/fphys.2020.00941

By:

Ma, Haoran;
Fujioka, Hideki;
Halpern, David;
Gaver III, Donald P.

Publication type:

Article

Trust platforms: The digitalization of corporate governance and the transformation of trust in polycentric space.

Published in:

Regulation & Governance, 2025, v. 19, n. 3, p. 806, doi. 10.1111/rego.12614

By:

Backer, Larry Catá

Publication type:

Article

A Novel PZT Pump with Built-in Compliant Structures.

Published in:

Sensors (14248220), 2019, v. 19, n. 6, p. 1301, doi. 10.3390/s19061301

By:

Bao, Qibo;
Zhang, Jianhui;
Tang, Ming;
Huang, Zhi;
Lai, Liyi;
Huang, Jun;
Wu, Chuanyu

Publication type:

Article

Additive manufacturing of smart polymeric composites: Literature review and future perspectives.

Published in:

2022

By:

Ikram, Hamid;
Al Rashid, Ans;
Koç, Muammer

Publication type:

Literature Review

Soft Electromagnetic Artificial Muscles Using High‐Density Liquid‐Metal Solenoid Coils and Bistable Stretchable Magnetic Housings.

Published in:

Advanced Functional Materials, 2024, v. 34, n. 31, p. 1, doi. 10.1002/adfm.202302895

By:

Shin, Gyowook;
Choi, YeongJin;
Jeon, ByungJun;
Choi, Inrak;
Song, Sukho;
Park, Yong‐Lae

Publication type:

Article

Book Review: C. H. M. Jenkins (Ed.), Compliant Structures in Nature and Engineering, Series: Design and Nature.

Published in:

2007

By:

Sigmund, O.

Publication type:

Book Review

"Well You Know...": Parents' Perceptions of Morality in AAA Youth Ice Hockey.

Published in:

Qualitative Report, 2023, v. 28, n. 12, p. 3478, doi. 10.46743/2160-3715/2023.6004

By:

McCarver, Zachary;
Vickland, Danielle Wong;
Stellino, Megan B.

Publication type:

Article

Exploring the performances of the vibrating barriers for the seismic protection of the Zoser pyramid.

Published in:

Scientific Reports, 2022, v. 12, n. 1, p. 1, doi. 10.1038/s41598-022-09444-x

By:

Cacciola, P.;
Shadlou, M.;
Ayoub, A.;
Rashed, Y. F.;
Tombari, A.

Publication type:

Article

A 3-prismatic-revolute-spherical compliant parallel platform for optoelectronic packaging.

Published in:

Journal of Mechanical Science & Technology, 2022, v. 36, n. 6, p. 2685, doi. 10.1007/s12206-022-0502-2

By:

Xu, Hongwei;
Zhou, Haibo;
Tan, Shuaixia;
Kong, Zhiping;
Duan, Ji-An

Publication type:

Article

Home-based upper limb stroke rehabilitation mechatronics: challenges and opportunities.

Published in:

BioMedical Engineering OnLine, 2023, v. 22, n. 1, p. 1, doi. 10.1186/s12938-023-01133-8

By:

Forbrigger, Shane;
DePaul, Vincent G.;
Davies, T. Claire;
Morin, Evelyn;
Hashtrudi-Zaad, Keyvan

Publication type:

Article

Automating the customization of stiffness-matched knee implants using machine learning techniques.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 7/8, p. 3725, doi. 10.1007/s00170-023-11357-6

By:

Burge, Thomas A.;
Munford, Maxwell J.;
Kechagias, Stylianos;
Jeffers, Jonathan R. T.;
Myant, Connor W.

Publication type:

Article

Design of a truss-structured compliant toolholder for machining of structured surfaces.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 7/8, p. 3489, doi. 10.1007/s00170-023-11321-4

By:

Paniselvam, Vinodth;
Kumar, A. Senthil

Publication type:

Article

Design of a compliant device for peg-hole separation in robotic disassembly.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 9, p. 3011, doi. 10.1007/s00170-022-10573-w

By:

Su, Shizhong;
Pham, Duc Truong;
Ji, Chunqian;
Wang, Yongjing;
Huang, Jun;
Zhou, Wei;
Wang, Haolin

Publication type:

Article

Design and modeling of a series–parallel compliant device for reliable assembly during a position or angle deviation.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 9/10, p. 6535, doi. 10.1007/s00170-021-08417-0

By:

Xu, Du;
Lu, XinJiang

Publication type:

Article

Axial crushing of thin walled cylindrical shell with foam core.

Published in:

Materials Research Innovations, 2011, v. 15, p. 3, doi. 10.1179/143307511X12858956846391

By:

Ye, L;
Lu, G X

Publication type:

Article

Setting the Free Material Design problem through the methods of optimal mass distribution.

Published in:

Calculus of Variations & Partial Differential Equations, 2022, v. 61, n. 2, p. 1, doi. 10.1007/s00526-022-02186-8

By:

Bołbotowski, Karol;
Lewiński, Tomasz

Publication type:

Article

The Seal Performance of Compliant Foil Gas Seal Based on Multi-Scale Analysis.

Published in:

Processes, 2022, v. 10, n. 6, p. 1123, doi. 10.3390/pr10061123

By:

Wang, Xueliang;
Liu, Meihong

Publication type:

Article

TRANSPORT POLICY IN THE REPUBLIC OF MACEDONIA.

Published in:

Horizons Series B, 2016, v. 3, p. 289, doi. 10.20544/HORIZONS.B.03.1.16.P30

By:

Dančevska, Verica;
Talevski, Josif;
Cvetanovski, Ile

Publication type:

Article

Stereo Visual Servoing Control of a Soft Endoscope for Upper Gastrointestinal Endoscopic Submucosal Dissection †.

Published in:

Micromachines, 2024, v. 15, n. 2, p. 276, doi. 10.3390/mi15020276

By:

Chen, Jian;
Wang, Shuai;
Zhao, Qingxiang;
Huang, Wei;
Chen, Mingcong;
Hu, Jian;
Wang, Yihe;
Liu, Hongbin

Publication type:

Article

Design and Evaluation of an Adjustable Compliant Constant-Force Microgripper.

Published in:

Micromachines, 2024, v. 15, n. 1, p. 52, doi. 10.3390/mi15010052

By:

He, Jiahang;
Liu, Yinong;
Yang, Chunbiao;
Tong, Zongdi;
Wang, Guangwei

Publication type:

Article

An Insect-Inspired Terrains-Adaptive Soft Millirobot with Multimodal Locomotion and Transportation Capability.

Published in:

Micromachines, 2022, v. 13, n. 10, p. 1578, doi. 10.3390/mi13101578

By:

Huang, Han;
Feng, Yu;
Yang, Xiong;
Yang, Liu;
Shen, Yajing

Publication type:

Article

Design of Deployable Structures by Using Bistable Compliant Mechanisms.

Published in:

Micromachines, 2022, v. 13, n. 5, p. 651, doi. 10.3390/mi13050651

By:

Liu, Tinghao;
Hao, Guangbo

Publication type:

Article

Design and Modeling of a Curved Beam Compliant Mechanism with Six Degrees of Freedom.

Published in:

Micromachines, 2022, v. 13, n. 2, p. N.PAG, doi. 10.3390/mi13020208

By:

Lin, Sheng;
Wang, Jiacheng;
Xiong, Wenkang;
Hu, Qingyuan;
Liu, Hui;
Wang, Qi

Publication type:

Article