Works matching DE "COLD rolling"

Results: 946

Multi-fault diagnosis of rolling mill main drive system based on UIO–DBO–SVM.

Published in:

Transactions of the Institute of Measurement & Control, 2025, v. 47, n. 10, p. 2099, doi. 10.1177/01423312241273784

By:

Zhang, Ruicheng;
He, Hao;
Liang, Weizheng

Publication type:

Article

Effect of Chemical Composition and Annealing Parameters for Advanced Packaging Steel Applications.

Published in:

Sakarya University Journal of Science (SAUJS) / Sakarya Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2025, v. 29, n. 2, p. 191, doi. 10.16984/saufenbilder.1599129

By:

Uzun, Ramazan;
Başkaya, Ümran;
Kılıç, Yasemin

Publication type:

Article

DEVELOPMENT OF A METHOD FOR COMBINED CONTROL OF THICKNESS, TENSION AND FLATNESS OF STRIPS IN CONTINUOUS COLD ROLLING TO REDUCE LONGITUDINAL THICKNESS VARIATION AND NONFLATNESS.

Published in:

Eastern-European Journal of Enterprise Technologies, 2025, v. 2, n. 1(134), p. 74, doi. 10.15587/1729-4061.2025.325416

By:

Wu Hongyi;
Prykhodko, Ihor;
Zuo Peng;
Debin, Wang

Publication type:

Article

Evolutions in Microstructure and Mechanical Properties of Ultra-Thin Oligocrystalline Invar Alloy Strip During Cold Rolling.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 2026, doi. 10.3390/ma18092026

By:

Yang, Jianguo;
Xia, Yajin;
Zhang, Qingke;
Chen, Genbao;
Xu, Cheng;
Song, Zhenlun;
Chen, Jiqiang

Publication type:

Article

Revealing the Synergistic Effects of Grain Refinement and Low Temperature on the Deformation Mechanisms of Cr–Mn–N Austenitic Stainless Steel.

Published in:

Metallurgical & Materials Transactions. Part A, 2025, v. 56, n. 6, p. 2252, doi. 10.1007/s11661-025-07773-w

By:

Wang, Zhi;
Hu, Chengyang;
Dong, Hangyu;
Wan, Xiangliang;
Deng, Xiangtao;
Ke, Rui;
Li, Guangqiang;
Wu, Kaiming

Publication type:

Article

Development of Cr-alloyed high carbon sheet steel - BW AC C77MD - for the manufacture of clutch bearing rings by deep drawing.

Published in:

Tecnologia em Metalurgia, Materiais e Mineração, 2024, v. 21, p. 1, doi. 10.4322/2176-1523.20242977

By:

Neiva Ferreira, Fernando Generoso;
Machado, Eduardo Alves;
Barbosa, Fabiano Almir;
Martins, Ivan Augusto;
Possati, Juliano Braz;
Rodrigues, Marcelo Urdapilleta;
Bomfim, Maurício Franco;
Kirmse, Odair;
da Silva, Sérgio Augusto Barbosa;
Frank, Thomas

Publication type:

Article

Caracterização da microestrutura e propriedades mecânicas do aço SAE 1080 patenteado e laminado a frio.

Published in:

Tecnologia em Metalurgia, Materiais e Mineração, 2024, v. 21, p. 1, doi. 10.4322/2176-1523.20242834

By:

Gomes de Vasconcelos, Marcelo;
Curvelo Ferreira, Gabriel;
Ferreira Filho, Antenor;
Costa Almeida, Gisele Fabiane;
Otubo, Larissa;
Ramos de Oliveira, Rene;
Batista de Lima, Nelson;
Augusto Couto, Antonio

Publication type:

Article

冷轧压下量对2618合金拉伸及热稳定性能的影响.

Published in:

Journal of Changzhou University (Natural Science Edition) / Changzhou Daxue Xuebao (Ziran Kexue Ban), 2025, v. 37, n. 2, p. 1, doi. 10.3969/j.issn.2095.0411.2025.02.001

By:

王雨航;
王芝秀;
顾晓彤;
李海

Publication type:

Article

Influence of β Grain Orientation on the Stress‐Induced Martensite Formation in Cold‐Rolled Metastable β Ti–5Mo–5V–5Al–3Cr Alloy.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 9, p. 1, doi. 10.1002/adem.202401494

By:

Rastogi, Abhishek;
Neelakantan, Suresh

Publication type:

Article

Electrolytic cleaning study of cold rolled steel using scanning Kelvin probe.

Published in:

Surface Engineering, 2022, v. 38, n. 5, p. 499, doi. 10.1080/02670844.2022.2101416

By:

Singh, Arun Kumar;
Rani, Nitu;
Dutta, Saibal;
Jha, Keshava Chandra

Publication type:

Article

Perspectives on Tribological Properties of Spray Formed Al–Pb Alloys.

Published in:

Macromolecular Symposia, 2024, v. 413, n. 1, p. 1, doi. 10.1002/masy.202300064

By:

Singh, Prabh Simranjit;
Mittal, Rashmi

Publication type:

Article

Microstructural Features of Spray‐Deposited Cold Rolled Al Alloy.

Published in:

Macromolecular Symposia, 2023, v. 407, n. 1, p. 1, doi. 10.1002/masy.202100497

By:

Mittal, Rashmi;
Sehrawat, Rajeev;
Reddy, Bandi Venkata Ramana;
Tyagi, Deepak;
Sharma, Anil

Publication type:

Article

A new device for simultaneous corrosion fatigue testing of joined materials in accelerated corrosion tests.

Published in:

Materials & Corrosion / Werkstoffe und Korrosion, 2015, v. 66, n. 9, p. 893, doi. 10.1002/maco.201407984

By:

LeBozec, N.;
Thierry, D.

Publication type:

Article

Lasso constraint regularized multi-objective variable hierarchical decoupling optimization flatness control strategies.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 9, p. 4897, doi. 10.1007/s00170-025-15435-9

By:

Zhou, Xiaomin;
Xiong, Qingxia;
Wang, Bin;
Song, Hechuan;
Zhang, Qingdong

Publication type:

Article

Suppression strategies of chatter in the cold rolling by regulating interface friction based on dynamic stability analysis.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 137, n. 7, p. 3743, doi. 10.1007/s00170-025-15370-9

By:

Xin, Yanli;
Gao, Zhiying;
Wang, Xiaoyong

Publication type:

Article

Research of steel strips microstructure and properties after symmetric and asymmetric cold rolling.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 136, n. 3, p. 1649, doi. 10.1007/s00170-024-14962-1

By:

Kozhevnikov, Aleksandr Vyacheslavovich;
Skripalenko, Mikhail Mikhailovich;
Rogachev, Stanislav Olegovich;
Sundeev, Roman Vyacheslavovich;
Kozhevnikova, Irina Aleksandrovna;
Skripalenko, Mikhail Nikolaevich;
Romantsev, Boris Alekseevich;
Danilin, Andrei Vladimirovich

Publication type:

Article

Identification of cold rolling chatter statesbased on multi-source data fusion and Dempster-Shafer theory.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 135, n. 7/8, p. 3633, doi. 10.1007/s00170-024-14717-y

By:

Wang, Xiaoyong;
Gao, Zhiying;
Xin, Yanli

Publication type:

Article

Experimental investigation of nanomechanical response from synergistic metal alloy fusion of Cu-Al-Zn-Sn for anti-corrosion and structural application.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 11/12, p. 5621, doi. 10.1007/s00170-024-13669-7

By:

Ayuba, Samuel U.;
Fayomi, Ojo S. I.;
Omotosho, Olugbenga A.

Publication type:

Article

A nonlinear design method of robust PI control by using adaptive backstepping control for web winding system of reversible cold rolling mill.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 7/8, p. 3251, doi. 10.1007/s00170-024-13446-6

By:

Akil, Abdelmajid;
Rabbah, Nabila

Publication type:

Article

Research on fabricating Cu/stainless steel composite thin strips by two-pass cold roll-bonding with intermediate annealing.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 7/8, p. 3323, doi. 10.1007/s00170-023-12779-y

By:

Niu, Xiaomiao;
Ding, Qingshan;
Zhang, Haoran;
Liu, Xiao;
Wang, Tao

Publication type:

Article

Research on the manufacturing of deep-groove ball bearing inner rings via the cold rolling of tube material.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 1/2, p. 739, doi. 10.1007/s00170-023-12760-9

By:

Wang, Hongji;
Zhou, Zhaoyao

Publication type:

Article

Tribological and mechanical laboratory analysis of DLC as substitutes for hard chromium coating in view of cold rolling of high carbon steel strips.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 11/12, p. 5435, doi. 10.1007/s00170-023-12664-8

By:

Ould, Choumad;
Gachon, Yves;
Badiche, Xavier;
Montmitonnet, Pierre

Publication type:

Article

Research on the generation and control of high-order flatness during the controlling of titanium strip profile by the intermediate taper roll in a 20-high mill.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 129, n. 1/2, p. 485, doi. 10.1007/s00170-023-12321-0

By:

Zhou, Guanyu;
He, Anrui;
Yuan, Tieheng;
Liu, Chao;
Liu, Zhengqiao;
Qiang, Yi

Publication type:

Article

Analysis of flatness actuator efficiency in thin strip steel tandem cold rolling by FEM considering the effect of time-varying work roll thermal crown.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 9/10, p. 4035, doi. 10.1007/s00170-023-12151-0

By:

Zhang, Yufeng;
Zhao, Meiying;
Wang, Qinglong;
Peng, Wen;
Li, Xu;
Di, Hongshuang;
Zhang, Dianhua

Publication type:

Article

Inverse calibration of the friction conditions in cold rolling by means of on-site force monitoring.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 128, n. 7/8, p. 3599, doi. 10.1007/s00170-023-12118-1

By:

Piccininni, Antonio;
Palumbo, Gianfranco

Publication type:

Article

Influence of edge thermal spraying on the temperature field and thermal crown of work roll during cold rolling of aluminum alloy strip.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 9/10, p. 4331, doi. 10.1007/s00170-023-11830-2

By:

Wang, Xiuliang;
Zhang, Weidong;
Ai, Yibo

Publication type:

Article

Study on quarter-wave control of DP980 steel based on a bending force linear combination strategy.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 5/6, p. 2881, doi. 10.1007/s00170-023-11637-1

By:

Sun, Wenquan;
Chen, Luzhen;
He, Anrui;
Liu, Chao;
Yuan, Tieheng;
Yi, Qiang

Publication type:

Article

Effects of cold-rolling operation parameters on the surface quality of stainless steel and titanium strips with oil pits.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 3/4, p. 1811, doi. 10.1007/s00170-023-11685-7

By:

Jeng, Yeau-Ren;
Aoh, Jong-Ning;
Lee, Jian-Ting;
Liu, Lee-Cheng;
Tsai, Ping-Chi;
Huang, Pay-Yau

Publication type:

Article

The effect of cold rolling reduction ratio on the microstructure and mechanical properties of ferritic stainless steel 430.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 9/10, p. 4225, doi. 10.1007/s00170-023-11159-w

By:

Sun, Xiaoyu;
Ma, Xiaoguang;
Li, Jinghui;
Ma, Linan;
Zhang, Mingya;
Zhao, Jingwei

Publication type:

Article

Predicting flatness of strip tandem cold rolling using a general regression neural network optimized by differential evolution algorithm.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 7/8, p. 3219, doi. 10.1007/s00170-023-11330-3

By:

Zhao, Jianwei;
Li, Jingdong;
Qie, Haotang;
Wang, Xiaochen;
Shao, Jian;
Yang, Quan

Publication type:

Article

Multi-objective optimal edge-drop control in tandem cold rolling of silicon steel strip.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 11/12, p. 5385, doi. 10.1007/s00170-023-10937-w

By:

Wang, Pengfei;
Li, Jiannan;
Li, Xu;
Duan, Shuwei;
Huang, Huagui;
Wang, Dewei

Publication type:

Article

Research status of the influence of machining processes and surface modification technology on the surface integrity of bearing steel materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 7/8, p. 2897, doi. 10.1007/s00170-023-10960-x

By:

Cheng, Yongjie;
Wang, Yanshuang;
Lin, Jianghai;
Xu, Shuhui;
Zhang, Pu

Publication type:

Article

Rolling force prediction during FGC process of tandem cold rolling based on IQGA-WNN ensemble learning.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 5/6, p. 2869, doi. 10.1007/s00170-023-10899-z

By:

Yan, Zhuwen;
Bu, Henan;
Hu, Changzhou;
Pang, Bo;
Lyu, Hongyu

Publication type:

Article

Research into the effect of flatness control actuators on vibration stability in cold rolling using the finite element method.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 245, doi. 10.1007/s00170-022-10593-6

By:

Cao, Lei;
Li, Xu;
Zhang, Dianhua

Publication type:

Article

In-process detection of miniature size holes in cold-rolled steel strips.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 1/2, p. 633, doi. 10.1007/s00170-022-10388-9

By:

Patra, Dibyayan;
Chavhan, Suresh;
Kundu, Chitresh

Publication type:

Article

An analysis of microstructure and mechanical properties of ferritic stainless steel 430 during cold rolling and subsequent annealing.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 3/4, p. 1159, doi. 10.1007/s00170-022-10206-2

By:

Sun, Xiaoyu;
Ma, Linan;
Li, Jinghui;
Zhang, Mingya;
Ma, Xiaoguang

Publication type:

Article

Modeling and validation of bending force for 6-high tandem cold rolling mill based on machine learning models.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 1/2, p. 389, doi. 10.1007/s00170-022-10196-1

By:

Li, Jingdong;
Wang, Xiaochen;
Yang, Quan;
Zhao, Jianwei;
Wu, Zedong;
Wang, Zhonghui

Publication type:

Article

Research on quarter-wave control in DP980 steel during cold rolling based on multi-pass simulation.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 1/2, p. 83, doi. 10.1007/s00170-022-10055-z

By:

Chen, Luzhen;
Sun, Wenquan;
He, Anrui;
Liu, Chao;
Yi, Qiang;
Zhao, Jianwei;
Zhou, Guanyu;
Yuan, Tieheng

Publication type:

Article

Research on quarter wave shape control of cold rolled high strength steel based on BP-MOPSO.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 9/10, p. 3867, doi. 10.1007/s00170-022-10101-w

By:

Yuan, Tieheng;
Sun, Wenquan;
He, Anrui;
Chen, Luzhen;
Liu, Chao;
Yong, Shengyi

Publication type:

Article

Novel analytical heat source model for cold rolling based on an energy method and unified yield criterion.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 9/10, p. 3725, doi. 10.1007/s00170-022-10016-6

By:

Zhang, Yufeng;
Li, Xu;
Zhao, Meiying;
Qu, Fuquan;
Zhang, Yuhe;
Peng, Wen;
Zhao, Dewen;
Di, Hongshuang;
Zhang, Dianhua

Publication type:

Article

Finite element analysis and experiment study on axial infeed hot rolling process of thread with Ti6Al4V.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 9/10, p. 5873, doi. 10.1007/s00170-022-09615-0

By:

Jiang, Fei;
Zhao, Shengdun;
Zhang, Shuowen;
Gao, Jinzhou;
Jiang, Hong;
Fei, Liangyu

Publication type:

Article

Analysis of friction characteristics during the thread cold rolling process by using a novel single-tooth rolling friction test.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 7/8, p. 5439, doi. 10.1007/s00170-022-09638-7

By:

Zhang, Shuowen;
Zhang, Dawei;
Liu, Dazhou;
Dong, Yuanzhe;
Li, Fan;
Zhao, Shengdun

Publication type:

Article

Influence of intermediate roll shifting on strip shape in a CVC-6 tandem cold mill based on a 3D multi-stand FE model.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 7/8, p. 4367, doi. 10.1007/s00170-022-09529-x

By:

Li, Lianjie;
Xie, Haibo;
Zhang, Tao;
Pan, Di;
Li, Xingsheng;
Chen, Fenghua;
Liu, Tianwu;
Liu, Xu;
Liu, Hongqiang;
Sun, Li;
Jiang, Zhengyi

Publication type:

Article

Rolling force prediction in cold rolling process based on combined method of T-S fuzzy neural network and analytical model.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 5/6, p. 4087, doi. 10.1007/s00170-022-09567-5

By:

Li, Jingdong;
Wang, Xiaochen;
Yang, Quan;
Guo, Ziao;
Song, Lebao;
Mao, Xing

Publication type:

Article

Investigation of rolling modes, structure, and properties of aluminum-magnesium alloy plates with a reduced scandium content.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 1/2, p. 1373, doi. 10.1007/s00170-022-09403-w

By:

Sidelnikov, Sergey Borisovich;
Baranov, Vladimir Nikolaevich;
Konstantinov, Igor Lazarevich;
Zenkin, Evgeniy Yuryevich;
Lopatina, Ekaterina Sergeevna;
Bezrukikh, Aleksandr Innokentyevich;
Voroshilov, Denis Sergeevich;
Yuryev, Pavel Olegovich;
Mansurov, Yulbarskhon Nabievich;
Voroshilova, Marina Vladimirovna;
Belokonova, Irina Nikolaevna;
Galiev, Roman Ilsurovich

Publication type:

Article

Transverse thickness profile control of electrical steel in 6-high cold rolling mills based on the GA-PSO hybrid algorithm.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 1/2, p. 295, doi. 10.1007/s00170-022-09322-w

By:

Song, Chunning;
Cao, Jianguo;
Wang, Leilei;
Xiao, Jing;
Zhao, Qiufang

Publication type:

Article

DDPG-based continuous thickness and tension coupling control for the unsteady cold rolling process.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 11/12, p. 7277, doi. 10.1007/s00170-022-09239-4

By:

Zeng, Wenying;
Wang, Jinkuan;
Zhang, Yan;
Han, Yinghua;
Zhao, Qiang

Publication type:

Article

Influence of work-roll grinding error and high-fidelity corrective grinding in cold sheet rolling.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 11/12, p. 7389, doi. 10.1007/s00170-022-09228-7

By:

Patel, Akash;
Malik, Arif;
Zhang, Feng;
Mathews, Ritin

Publication type:

Article

Study on setting method of flatness target curve of SUNDWIG 20-high mill considering target crown.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 9/10, p. 6983, doi. 10.1007/s00170-022-09152-w

By:

Sun, Jianliang;
Yan, Mingze;
Li, Mingyuan;
Hao, Tongtong

Publication type:

Article

Thickness prediction of thin strip cold rolling based on VBGM-RBF.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 9/10, p. 5865, doi. 10.1007/s00170-022-09122-2

By:

Huang, Yue;
Zhou, Xiaomin;
Gao, Zhiying

Publication type:

Article