Found: 614
Select item for more details and to access through your institution.
Finite Element Simulations of the Localized Failure and Fracture Propagation in CohesiveMaterials with Friction.
- Published in:
- CMES-Computer Modeling in Engineering & Sciences, 2024, v. 140, n. 1, p. 997, doi. 10.32604/cmes.2024.048640
- By:
- Publication type:
- Article
A numerical study on predicting bond-slip relationship of reinforced concrete using surface based cohesive behavior.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2024, v. 18, n. 69, p. 154, doi. 10.3221/IGF-ESIS.69.12
- By:
- Publication type:
- Article
Numerical investigation of crack propagation regimes in snow fracture experiments.
- Published in:
- Granular Matter, 2024, v. 26, n. 3, p. 1, doi. 10.1007/s10035-024-01423-5
- By:
- Publication type:
- Article
Experimental estimation and numerical validation of cohesive zone parameters in hydroxyl functionalized MWCNTs‐reinforced CFRP under pure mode II loading.
- Published in:
- Polymer Composites, 2024, v. 45, n. 9, p. 8236, doi. 10.1002/pc.28337
- By:
- Publication type:
- Article
A cohesive model for the rupture of concrete by low‐cycle fatigue.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2024, v. 47, n. 6, p. 2215, doi. 10.1111/ffe.14298
- By:
- Publication type:
- Article
Influence of self-weight on size effect of quasi-brittle materials: generalized analytical formulation and application to the failure of irregular masonry arches.
- Published in:
- International Journal of Fracture, 2024, v. 246, n. 2/3, p. 117, doi. 10.1007/s10704-023-00710-1
- By:
- Publication type:
- Article
Research on Tensile Strength of 304 Butt Brazed Joint of Oscillating Tube of Gas-Wave Machine Based on Cohesive Zone Model.
- Published in:
- Light Industry Machinery, 2024, v. 42, n. 3, p. 46, doi. 10.3969/j.issn.1005-2895.2024.03.007
- By:
- Publication type:
- Article
Optimization of Cohesive Parameters in the Interfacial Transition Zone of Rubberized Concrete Based on the Response Surface Method.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 11, p. 1579, doi. 10.3390/polym16111579
- By:
- Publication type:
- Article
Use of effective multiscale cohesive models in the simulation of spall in metal plates.
- Published in:
- International Journal for Numerical Methods in Engineering, 2024, v. 125, n. 9, p. 1, doi. 10.1002/nme.7446
- By:
- Publication type:
- Article
Special Issue: Damage Analysis for Composite Materials: Methods, Testing and Evaluation.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 10, p. 2314, doi. 10.3390/ma17102314
- By:
- Publication type:
- Article
Assessment of Reinforcement Effect of FRP-Strengthened Shield Segment Joint Based on the CZM Model.
- Published in:
- Advances in Civil Engineering, 2024, v. 2024, p. 1, doi. 10.1155/2024/8888139
- By:
- Publication type:
- Article
Bearing Characteristics with Effect of Bond–Slip Behavior in Massive Ring-Type Reinforced Concrete Structures.
- Published in:
- Buildings (2075-5309), 2024, v. 14, n. 5, p. 1332, doi. 10.3390/buildings14051332
- By:
- Publication type:
- Article
Evaluation of the influence of the material composition on the peel behavior of adhesive and cohesive peel systems using experimental fracture mechanics methods.
- Published in:
- Materialwissenschaft und Werkstoffechnik, 2024, v. 55, n. 5, p. 674, doi. 10.1002/mawe.202400069
- By:
- Publication type:
- Article
The Application of Sand Transport with Cohesive Admixtures Model for Predicting Flushing Flows in Channels.
- Published in:
- Water (20734441), 2024, v. 16, n. 9, p. 1214, doi. 10.3390/w16091214
- By:
- Publication type:
- Article
Simulation-based evaluation of effects of fabric structure on thermal conductivity of various 2D woven composites.
- Published in:
- Journal of Industrial Textiles, 2024, p. 1, doi. 10.1177/15280837241247341
- By:
- Publication type:
- Article
From ductile damage to unilateral contact via a point-wise implicit discontinuity.
- Published in:
- Computational Mechanics, 2024, v. 73, n. 4, p. 857, doi. 10.1007/s00466-023-02392-x
- By:
- Publication type:
- Article
Numerical Cohesive Zone Modeling (CZM) of Self-Anchoring AM Metal-CFRP joints.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2024, n. 68, p. 280, doi. 10.3221/IGF-ESIS.68.19
- By:
- Publication type:
- Article
Degradation analysis of dynamic properties for plain concrete structures under mixed-mode fracture conditions via an improved cohesive crack approach.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2024, n. 68, p. 422, doi. 10.3221/IGF-ESIS.68.28
- By:
- Publication type:
- Article
Rock fracture propagation in a damage zone by a constitutive model coupling volume and cohesive elements.
- Published in:
- International Journal for Numerical & Analytical Methods in Geomechanics, 2024, v. 48, n. 5, p. 1483, doi. 10.1002/nag.3694
- By:
- Publication type:
- Article
Simplified Procedure to Determine the Cohesive Material Law of Fiber-Reinforced Cementitious Matrix (FRCM)–Substrate Joints.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 7, p. 1627, doi. 10.3390/ma17071627
- By:
- Publication type:
- Article
Characterization and Simulation of the Interface between a Continuous and Discontinuous Carbon Fiber Reinforced Thermoplastic by Using the Climbing Drum Peel Test Considering Humidity.
- Published in:
- Polymers (20734360), 2024, v. 16, n. 7, p. 976, doi. 10.3390/polym16070976
- By:
- Publication type:
- Article
Modeling of 3D Brick‐and‐Mortar Structures Using Cohesive Zone Finite Elements.
- Published in:
- Advanced Engineering Materials, 2024, v. 26, n. 6, p. 1, doi. 10.1002/adem.202301146
- By:
- Publication type:
- Article
Deep neural network aided cohesive zone parameter identifications through die shear test in electronic packaging.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2024, v. 47, n. 3, p. 766, doi. 10.1111/ffe.14220
- By:
- Publication type:
- Article
Decohesion of graphene from a uniaxially-stretched substrate: Failure analysis of a frictional adhesive interface.
- Published in:
- Friction (2223-7704), 2024, v. 12, n. 3, p. 510, doi. 10.1007/s40544-023-0779-x
- By:
- Publication type:
- Article
Laboratory Investigations on the Mode of Failure in Frictional and Low-Cohesive Materials Under the Load of a Ground Anchor.
- Published in:
- Geotechnical & Geological Engineering, 2024, v. 42, n. 2, p. 1035, doi. 10.1007/s10706-023-02603-5
- By:
- Publication type:
- Article
Comparison of the phase-field approach and cohesive element modeling to analyze the double cleavage drilled compression fracture test of an elastoplastic material: Phase-field approach and cohesive elements for DCDC.
- Published in:
- International Journal of Fracture, 2024, v. 245, n. 3, p. 209, doi. 10.1007/s10704-023-00755-2
- By:
- Publication type:
- Article
Using Machine Learning and Finite Element Analysis to Extract Traction-Separation Relations at Bonding Wire Interfaces of Insulated Gate Bipolar Transistor Modules.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 5, p. 1002, doi. 10.3390/ma17051002
- By:
- Publication type:
- Article
Analytical Investigation of Replica-Molding-Enabled Nanopatterned Tribocharging Process on Soft-Material Surfaces.
- Published in:
- Micromachines, 2024, v. 15, n. 3, p. 417, doi. 10.3390/mi15030417
- By:
- Publication type:
- Article
Factors Influencing Food Powder Flowability.
- Published in:
- Powders, 2024, v. 3, n. 1, p. 65, doi. 10.3390/powders3010006
- By:
- Publication type:
- Article
Modeling the progressive damage of cryogenic microdroplet tests using a temperature‐friction cohesive zone model.
- Published in:
- Polymer Composites, 2024, v. 45, n. 3, p. 2156, doi. 10.1002/pc.27910
- By:
- Publication type:
- Article
Mechanical Properties of Rock Specimens Containing Pre-Existing Cracks with Different Dip Angles Based on Energy Theory and Cohesive Element Method.
- Published in:
- Applied Sciences (2076-3417), 2024, v. 14, n. 4, p. 1484, doi. 10.3390/app14041484
- By:
- Publication type:
- Article
Calibrating an adaptive cohesive zone model to simulate ductile crack propagation in structural steel under cyclic loading.
- Published in:
- Fatigue & Fracture of Engineering Materials & Structures, 2024, v. 47, n. 2, p. 319, doi. 10.1111/ffe.14183
- By:
- Publication type:
- Article
Bursting Sand Balloons.
- Published in:
- Fluids, 2024, v. 9, n. 2, p. 49, doi. 10.3390/fluids9020049
- By:
- Publication type:
- Article
The adaptive coupling of dual-horizon peridynamic element and finite element for the progressive failure of materials.
- Published in:
- International Journal of Fracture, 2024, v. 245, n. 1/2, p. 89, doi. 10.1007/s10704-023-00758-z
- By:
- Publication type:
- Article
Introduction to the special issue on nonlocal models in fracture and damage.
- Published in:
- International Journal of Fracture, 2024, v. 245, n. 1/2, p. 115, doi. 10.1007/s10704-024-00769-4
- By:
- Publication type:
- Article
Numerical investigation of the strength of Al/GFRP adhesive bonding under tensile loading.
- Published in:
- Journal of Polymer Engineering, 2024, v. 44, n. 2, p. 145, doi. 10.1515/polyeng-2023-0273
- By:
- Publication type:
- Article
XFEM for Composites, Biological, and Bioinspired Materials: A Review.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 3, p. 745, doi. 10.3390/ma17030745
- By:
- Publication type:
- Article
A 3D cohesive‐frictional coupled interface model for mesoscale simulation of steel fibre‐reinforced concrete.
- Published in:
- International Journal for Numerical Methods in Engineering, 2024, v. 125, n. 2, p. 1, doi. 10.1002/nme.7370
- By:
- Publication type:
- Article
Impact damage assessment in laminated composites using acoustic emission and finite element methods.
- Published in:
- Polymer Composites, 2024, v. 45, n. 2, p. 1036, doi. 10.1002/pc.27834
- By:
- Publication type:
- Article
Cohesive Properties of Bimaterial Interfaces in Semiconductors: Experimental Study and Numerical Simulation Using an Inverse Cohesive Contact Approach.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 2, p. 289, doi. 10.3390/ma17020289
- By:
- Publication type:
- Article
Modelling of Fatigue Delamination Growth and Prediction of Residual Tensile Strength of Thermoplastic Coupons.
- Published in:
- Materials (1996-1944), 2024, v. 17, n. 2, p. 362, doi. 10.3390/ma17020362
- By:
- Publication type:
- Article
A finite‐discrete element model for simulating collision and fragmentation of nanoparticle agglomerates.
- Published in:
- AIChE Journal, 2024, v. 70, n. 1, p. 1, doi. 10.1002/aic.18275
- By:
- Publication type:
- Article
Mechanical Loading Effect on Stress States and Failure Behavior in Thermal Barrier Coatings.
- Published in:
- Crystals (2073-4352), 2024, v. 14, n. 1, p. 2, doi. 10.3390/cryst14010002
- By:
- Publication type:
- Article
Fracture simulation of concrete beams to assess softening behavior by varying different fractions of aggregates.
- Published in:
- Fracture & Structural Integrity / Frattura ed Integrità Strutturale, 2024, n. 67, p. 43, doi. 10.3221/IGF-ESIS.67.04
- By:
- Publication type:
- Article
Interface failure of segmental tunnel lining strengthened with steel plates based on fracture mechanics.
- Published in:
- Frontiers of Structural & Civil Engineering, 2024, v. 18, n. 1, p. 137, doi. 10.1007/s11709-024-1019-9
- By:
- Publication type:
- Article
Study on Peeling Performance of T-Type Brazing Joints Based on Energy Method.
- Published in:
- Metals (2075-4701), 2024, v. 14, n. 1, p. 115, doi. 10.3390/met14010115
- By:
- Publication type:
- Article
Three‐dimensional cohesive finite element simulations of mechanical behavior of polymer‐bonded explosives under quasi‐static tensile loading.
- Published in:
- Propellants, Explosives, Pyrotechnics, 2024, v. 49, n. 1, p. 1, doi. 10.1002/prep.202300177
- By:
- Publication type:
- Article
A robust interface finite element formulation for modeling brittle material failure problems.
- Published in:
- International Journal for Numerical Methods in Engineering, 2023, v. 124, n. 23, p. 5356, doi. 10.1002/nme.7298
- By:
- Publication type:
- Article
On the Use of Drilling Degrees of Freedom to Stabilise the Augmented Finite Element Method.
- Published in:
- Applied Mechanics, 2023, v. 4, n. 4, p. 1140, doi. 10.3390/applmech4040059
- By:
- Publication type:
- Article
Effects of Concrete Substrate Condition on Fiber-Reinforced Composite Strength Properties.
- Published in:
- Engineering, Technology & Applied Science Research, 2023, v. 13, n. 6, p. 12301, doi. 10.48084/etasr.6255
- By:
- Publication type:
- Article