Works about CARBON fibers

Results: 5000

Electro-chemo-mechanical modelling of structural battery composite full cells.

Published in:

NPJ Computational Materials, 2025, v. 11, n. 1, p. 1, doi. 10.1038/s41524-025-01646-x

By:

Larsson, Carl;
Larsson, Fredrik;
Xu, Johanna;
Runesson, Kenneth;
Asp, Leif E.

Publication type:

Article

Waterborne Polyurethane/Nano‐SiO2 Hybrid Organic–Inorganic Sizing Agents for Enhanced Mechanical Properties of Carbon Fibers/Epoxy Composites.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 10, p. 1, doi. 10.1002/adem.202402879

By:

Sun, Jian;
Liu, Jiaxin;
Sun, Xiaojun;
Gao, Zijian;
Wang, Di;
Jin, Zhaohui;
Gao, Huajing

Publication type:

Article

Investigation of Tensile, and Morphological Characteristic of Laminated Bio-Composite for Bone Plate Fixation Applications.

Published in:

Journal of Composite & Advanced Materials / Revue des Composites et des Matériaux Avancés, 2025, v. 35, n. 2, p. 295, doi. 10.18280/rcma.350211

By:

Fadhil, Hwazen Salam;
Oleiwi, Jawad Kadhim;
Hamad, Qahtan Adnan

Publication type:

Article

EXPERIMENTAL INVESTIGATION ON THE EFFECT OF STACKING SEQUENCE ON THE MECHANICAL PROPERTIES OF BAMBOO AND CARBON FIBER REINFORCED EPOXY HYBRID COMPOSITE FOR AEROSPACE AND AUTOMOBILE APPLICATION.

Published in:

Academic Journal of Manufacturing Engineering, 2025, v. 23, n. 1, p. 87, doi. 10.5281/zenodo.15180957

By:

B., Sunil;
Purushotham, G.;
Kamath, Sakshi Shantharam;
C., Ravi Kumar

Publication type:

Article

碳纤维/环氧树脂拉扭多耦合效应层合板设计与试验验证.

Published in:

Acta Materiae Compositae Sinica, 2025, v. 42, n. 4, p. 2257, doi. 10.13801/j.cnki.fhclxb.20240716.003

By:

崔达;
张鸣昊;
李道奎

Publication type:

Article

石墨烯纳米片改性高模碳纤维复合材料的界面及湿热性能.

Published in:

Acta Materiae Compositae Sinica, 2025, v. 42, n. 4, p. 1902, doi. 10.13801/j.cnki.fhelxb.20240712.001

By:

毛新东;
田艳红;
孙江曼;
张学军

Publication type:

Article

勃姆石/石墨烯多尺度增韧改性碳纤维环氧树脂复合材料.

Published in:

Acta Materiae Compositae Sinica, 2025, v. 42, n. 4, p. 1922, doi. 10.13801/j.cnki.fhclxb.20240718.003

By:

刘蓉;
陈杰;
龚璋灏;
赵伟;
马明硕;
刘治刚

Publication type:

Article

Calculation of Principal Directional Strains of Layers Inside Carbon Fiber Laminates Based on Sequential Strain Measurements.

Published in:

Experimental Techniques, 2025, v. 49, n. 3, p. 407, doi. 10.1007/s40799-024-00752-7

By:

Wang, S.;
Li, X. F.;
Han, X. L.;
Zhang, Q.;
Li, Z. G.;
Lv, S. Y.

Publication type:

Article

Polycondensation‐Derived High‐Molecular Weight Lignin as Nonblended Precursor for Carbon Fibers.

Published in:

Macromolecular Materials & Engineering, 2025, v. 310, n. 5, p. 1, doi. 10.1002/mame.202400388

By:

Clauss, Manuel M.;
Frank, Erik;
Bauch, Volker;
Kuske, Lisa;
Buchmeiser, Michael R.

Publication type:

Article

Atomistic modeling of mesophase pitch-based carbon fiber with realistic structural features and its mechanical response under nanoindentation.

Published in:

Journal of Materials Science, 2025, v. 60, n. 18, p. 7535, doi. 10.1007/s10853-025-10870-1

By:

Wang, Xinjie;
Pan, Shidong;
Wang, Xinzhu;
Zhou, Zhengong;
Zhao, Chengwei;
Li, Dan;
Luo, Chunyan;
Ju, Anqi

Publication type:

Article

Impact of anode surface modifications on microbial fuel cell performance and algal biomass production.

Published in:

Environmental Technology, 2025, v. 46, n. 13, p. 2306, doi. 10.1080/09593330.2024.2428445

By:

Altın, Necla;
Uyar, Başar

Publication type:

Article

Impact of reinforcing ability of carbon fiber on the thermomechanical properties of epoxy based hybrid composites.

Published in:

Journal of Macromolecular Science: Pure & Applied Chemistry, 2025, v. 62, n. 5, p. 419, doi. 10.1080/10601325.2025.2486059

By:

Maurya, Anand;
Kumar, Pradeep;
Sinha, Shishir

Publication type:

Article

改进静电植绒法制备沥青基碳纤维垂直排列高导热热界面材料.

Published in:

Journal of Shanghai University / Shanghai Daxue Xuebao, 2025, v. 31, n. 1, p. 106, doi. 10.12066/j.issn.1007-2861.2571

By:

武美霞;
欧阳江坤;
侯梦迪;
洪建婷;
丁鹏;
王金合

Publication type:

Article

CVI 过程中三向正交预制体孔隙结构的演变及气体扩散行为.

Published in:

Journal of Shanghai University / Shanghai Daxue Xuebao, 2025, v. 31, n. 1, p. 58, doi. 10.12066/j.issn.1007-2861.2541

By:

肖佳文;
杨敏;
姚敏;
黄成杰;
李红;
任慕苏;
孙晋良

Publication type:

Article

碳纤维对聚丙烯复合材料管道的性能影响.

Published in:

Synthetic Fibre, 2025, v. 45, n. 5, p. 71

By:

韩明珍

Publication type:

Article

Hydrogen Production via Thermal Cracking of Ammonia Using Steel Fiber Catalyst.

Published in:

BioResources, 2025, v. 20, n. 2, p. 4416, doi. 10.15376/biores.20.2.4416-4431

By:

Bo Zhang;
Mingyue Zhao;
Kangwei He;
Jianye Huang

Publication type:

Article

基于空间分解损伤变量法的碳纤维层合板褶皱缺陷演化的数值模拟研究.

Published in:

Journal of Mechanical Strength / Jixie Qiangdu, 2025, v. 47, n. 4, p. 63, doi. 10.16579/j.issn.1001.9669.2025.04.008

By:

郑皓成;
周勃;
李慧;
王雅洁;
孙宁;
张雪岩

Publication type:

Article

Characterization of the coir fiber from different coconut varieties to enhance the performance of coir fiber-reinforced natural rubber composites.

Published in:

Journal of Elastomers & Plastics, 2025, v. 57, n. 4, p. 475, doi. 10.1177/00952443251323933

By:

Fernando, Jayakodi A. K. M.;
Yalegama, Chandi;
Fernando, Nandana;
Samarakoon, Upeka K.;
Edirisinghe, Dilhara;
Sampath, Manju

Publication type:

Article

Milling hole characteristic of cryogenic cooling for carbon fiber reinforced composite based on laminated material structure.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 3, p. 1491, doi. 10.1007/s00170-025-15652-2

By:

Cao, Lihua;
Wang, Fengbiao;
Sun, Li

Publication type:

Article

High‐performance, semi‐bio‐based degradable epoxy resins and their application to recyclable carbon fiber composites.

Published in:

Polymer International, 2025, v. 74, n. 6, p. 520, doi. 10.1002/pi.6646

By:

Yu, Shuanghong;
Xiao, Kaixuan;
Wang, Zhaodi;
Xu, Yahong;
Ni, Nannan;
Hu, Dongyuan;
Lyu, Zhiyi;
Kim, Soochan;
Yang, Xin

Publication type:

Article

Fracture Resistance of Endodontically Treated Teeth Restored with Different Fiber Post Systems Under Cyclic Loading: An In Vitro Study.

Published in:

Journal of Pioneering Medical Sciences, 2025, v. 14, p. 358, doi. 10.47310/jpms202514S0145

By:

Marwaha, Jasmine;
Arora, Vipin;
Arora, Pooja;
Kar, Sunil;
Arya, Ashtha;
Chattopadhyay, Arnabi

Publication type:

Article

Sodium-Intercalated Vanadium Oxide Coated on Carbon Cloth for Electrode Materials in High-Performance Aqueous Zinc-Ion Batteries.

Published in:

Molecules, 2025, v. 30, n. 9, p. 2074, doi. 10.3390/molecules30092074

By:

Chen, Chen;
Hou, Baoxuan;
Cheng, Ting;
Wu, Fei;
Hu, Yulin;
Dai, Youzhi;
Zhang, Xiao;
Tian, Yuan;
Zhao, Xin;
Wang, Lei

Publication type:

Article

Crosslinking Approaches for Polyethylene Imine (PEI) and Its Uses in Adsorption of Heavy Metals, Dyes, and Carbon Dioxide.

Published in:

Applied Sciences (2076-3417), 2025, v. 15, n. 9, p. 4767, doi. 10.3390/app15094767

By:

Chandra, Ashika;
Singh, Ashneel Ajay;
Prasad, Surendra;
Andersson, Mats R.;
Gedefaw, Desta

Publication type:

Article

Fabrication of Poly(s-triazine- co - o -aminophenol) Conducting Polymer via Electropolymerization and Its Application in Aqueous Charge Storage.

Published in:

Polymers (20734360), 2025, v. 17, n. 9, p. 1160, doi. 10.3390/polym17091160

By:

Bai, Xueting;
Lan, Bo;
Li, Xinyang;
Yi, Xinlan;
Pei, Shaotong;
Wang, Chao

Publication type:

Article

Enhancing Wear Resistance and Adhesion of Primer Coatings on Laser-Textured Milled Carbon Fiber-Filled Basalt Composites.

Published in:

Polymers (20734360), 2025, v. 17, n. 9, p. 1150, doi. 10.3390/polym17091150

By:

Coşkun, Özer;
Fidan, Sinan;
Özsoy, Mehmet İskender;
Bora, Mustafa Özgür;
Ürgün, Satılmış;
Şahin, Alp Eren;
Yılmaz, Taner

Publication type:

Article

Qualification of the Vitrimeric Matrices in Industrial-Scale Wet Filament Winding Processes for Type-4 Pressure Vessels.

Published in:

Polymers (20734360), 2025, v. 17, n. 9, p. 1146, doi. 10.3390/polym17091146

By:

Alms, Jonathan;
Sambale, Anna Katharina;
Fuchs, Jannick;
Lorenz, Niklas;
von den Berg, Nina;
Conen, Tobias;
Çelik, Hakan;
Dahlmann, Rainer;
Hopmann, Christian;
Stommel, Markus

Publication type:

Article

Experimental Study on the Effects of Thermal Cycling and Ultraviolet Irradiation on Stable Characteristics of Carbon Fiber/Bismaleimide Polymer Composite Shells.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 1942, doi. 10.3390/ma18091942

By:

Zhang, Zheng;
Ji, Xinyue;
Sun, Min;
Xiong, Libin;
Zhang, Guang;
Ding, Wenjie;
Li, Jiquan;
Jiang, Shaofei

Publication type:

Article

Investigation into Applicability of 3D-Printed Composite Polymers with Enhanced Mechanical Properties in the Development of Microwave Components.

Published in:

Electronics (2079-9292), 2025, v. 14, n. 9, p. 1865, doi. 10.3390/electronics14091865

By:

Lumia, Mauro;
Bragaglia, Mario;
Nanni, Francesca;
Valeri, Matteo;
Bouzekri, Oilid;
Calignano, Flaviana;
Manfredi, Diego;
Addamo, Giuseppe;
Paonessa, Fabio;
Peverini, Oscar Antonio

Publication type:

Article

Evaluating the Potential for Different Fabrics to Protect Grapes from Contamination by Smoke.

Published in:

Foods, 2025, v. 14, n. 9, p. 1550, doi. 10.3390/foods14091550

By:

Shi, Tingting;
Ristic, Renata;
Wilkinson, Kerry

Publication type:

Article

Biomechanical performance of post-and-cores of polyetheretherketone and its composites.

Published in:

BMC Oral Health, 2025, v. 25, n. 1, p. 1, doi. 10.1186/s12903-025-06089-w

By:

Wang, Biyao;
Huang, Minghao;
Zhang, Kaige;
Xu, Yan;
Zhang, Xinwen;
Shi, Liye;
Yan, Xu

Publication type:

Article

Enhancing Oxidation Resistance and Electrothermal Performance of Carbon Fibers Through Nickel Plating for Advanced Applications.

Published in:

Journal of Electronic Materials, 2025, v. 54, n. 6, p. 4846, doi. 10.1007/s11664-025-11878-8

By:

Dong, Xiongwei;
Yin, Zixiong;
Tian, Yuan;
Chen, Chunliang;
Wang, Yumin;
Zhao, Xipo;
Liu, Huihong;
Fang, Pengfei;
Xiong, Yi;
Mahmud, Sakil;
Hu, Doumeng;
Zeng, Wei

Publication type:

Article

Flexural properties and structure of carbon fiber reinforced laminates additionally modified with various dispersed fillers.

Published in:

Russian Physics Journal, 2025, v. 68, n. 2, p. 308, doi. 10.1007/s11182-025-03434-y

By:

Burkov, M. V.;
Eremin, A. V.;
Kononova, A. A.;
Morokov, E. S.

Publication type:

Article

Front Cover: Engineering MoFe Nanostructures on Carbon Cloth for Sustainable Ammonia Production via Nitrogen Reduction (ChemCatChem 9/2025).

Published in:

ChemCatChem, 2025, v. 17, n. 9, p. 1, doi. 10.1002/cctc.202580901

By:

Kweon, Shinyoung;
Qureshi, Nilam;
Shim, Jun Ho

Publication type:

Article

NiSe/Ni2P Nanoparticles Encapsulated in Carbon Nanotubes to Construct Self‐Supported Electrode for Efficient Water Splitting.

Published in:

ChemCatChem, 2025, v. 17, n. 9, p. 1, doi. 10.1002/cctc.202500071

By:

Ling, Tianjiao;
Lv, Fan;
Guo, Ruiqi;
Cao, Yi;
Zhang, Mingzhi;
Wang, Huihua;
Chen, JinXin;
Li, Huaqing;
Ren, Hao;
Li, Guangcheng;
Li, Hongwei;
Sheng, Minqi

Publication type:

Article

Engineering MoFe Nanostructures on Carbon Cloth for Sustainable Ammonia Production via Nitrogen Reduction.

Published in:

ChemCatChem, 2025, v. 17, n. 9, p. 1, doi. 10.1002/cctc.202401936

By:

Kweon, Shinyoung;
Qureshi, Nilam;
Shim, Jun Ho

Publication type:

Article

Mechanical recycling of carbon fiber composites: Development of hybrid composites of epoxy resin, carbon fiber, and carbon nanotubes for functional electromagnetic applications.

Published in:

Polymer Engineering & Science, 2025, v. 65, n. 5, p. 2500, doi. 10.1002/pen.27163

By:

dos Santos, Maikon Stefano;
dos Anjos, Erick Gabriel Ribeiro;
Montagna, Larissa Stieven;
Passador, Fabio Roberto

Publication type:

Article

Designing Physicochemically‐Ordered Interphases for High‐Performance Composites (Adv. Funct. Mater. 19/2025).

Published in:

Advanced Functional Materials, 2025, v. 35, n. 19, p. 1, doi. 10.1002/adfm.202570109

By:

Gupta, Sumit;
Sohail, Tanvir;
Checa, Marti;
Toomey, Michael D.;
Kearney, Logan T.;
Chahal, Rajni;
Rohewal, Sargun S.;
Kanbargi, Nihal;
Ghosh, Swarnava;
Collins, Liam;
McConnell, David;
Ivanov, Ilia N.;
Naskar, Amit K.;
Bowland, Christopher C.

Publication type:

Article

Improved Mechanical Performance of Epoxy Systems with Low Loadings of Milled Carbon Fiber via Chemical Surface Modification.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 9, p. 1, doi. 10.1002/adem.202402306

By:

Newman, Ben;
Stojcevski, Filip;
Jarvis, Karyn L.;
Coia, Piers;
Henderson, Luke C.

Publication type:

Article

Effects of Preoxidation on Microstructure and Characteristics of Carbon/Carbon Composite–Ti3Al Joints Prepared by Transient Liquid Phase Diffusion Bonding.

Published in:

Advanced Engineering Materials, 2025, v. 27, n. 9, p. 1, doi. 10.1002/adem.202401985

By:

Wang, Jie;
Shen, Wanru;
Yang, Jin;
Feng, Yang;
Zhou, Zhe;
Yin, Yaoji

Publication type:

Article

Novel carbon-fiber powder benzoxazine-epoxy composites.

Published in:

Journal of Polymer Research, 2025, v. 32, n. 4, p. 1, doi. 10.1007/s10965-025-04370-8

By:

Amirova, Liliya M.;
Khamidullin, Oskar L.;
Madiyarova, Gulnaz M.;
Balkaev, Dinar A.;
Antipin, Igor S.;
Amirov, Rustem R.

Publication type:

Article

Front Cover: Synergetic Interlayer in Li‐S Batteries: Polysulfide‐Impeding Effect of Conductive Carbon Cloth Supporting Topological‐Phase Bi2Se3 (ChemElectroChem 9/2025).

Published in:

ChemElectroChem, 2025, v. 12, n. 9, p. 1, doi. 10.1002/celc.202400578

By:

Wang, Heng;
Dong, Huichao;
Kan, Ting;
Luo, Hewei;
Yan, Ji;
Yoshikawa, Hirofumi

Publication type:

Article

Synergetic Interlayer in Li‐S Batteries: Polysulfide‐Impeding Effect of Conductive Carbon Cloth Supporting Topological‐Phase Bi2Se3.

Published in:

ChemElectroChem, 2025, v. 12, n. 9, p. 1, doi. 10.1002/celc.202400578

By:

Wang, Heng;
Dong, Huichao;
Kan, Ting;
Luo, Hewei;
Yan, Ji;
Yoshikawa, Hirofumi

Publication type:

Article

Enhanced shear and vibration behaviour of co-cured CFRP joints with innovative lamination techniques.

Published in:

Journal of Adhesion, 2025, v. 101, n. 8, p. 1012, doi. 10.1080/00218464.2024.2411368

By:

Karthikeyan, N.;
Naveen, Jesuarockiam

Publication type:

Article

PERSPECTIVES ON THE IMPACT OF ADVANCED FOOTWEAR ON RUNNING PERFORMANCE AND INJURY: A REVIEW.

Published in:

Leather & Footwear Journal / Revista de Pielarie Incaltaminte, 2025, v. 25, n. 1, p. 3, doi. 10.24264/lfj.25.1.1

By:

Song Min LEE;
Yong Ung KWON

Publication type:

Article

Influence of Advanced-Footwear-Technology Spikes on Middle- and Long-Distance Running Performance Measures in Trained Runners.

Published in:

International Journal of Sports Physiology & Performance, 2025, v. 20, n. 5, p. 689, doi. 10.1123/ijspp.2024-0377

By:

Rodrigo-Carranza, Víctor;
Muñoz de la Cruz, Violeta;
Hoogkamer, Wouter

Publication type:

Article

Enhancing interfacial adhesion in carbon fiber‐reinforced composites through polydopamine‐assisted nanomaterial coatings.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6768, doi. 10.1002/pc.29479

By:

Sharma, Prabhjot;
Sharma, Sahendra P.

Publication type:

Article

Modeling‐based characterization for thermal expansion and chemical shrinkage of highly viscous epoxy resin with thermoplastic additives under the curing condition.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6657, doi. 10.1002/pc.29385

By:

Liu, Meiyu;
Feng, Yuncong;
Sun, Deyong;
Zhao, Yueqing;
Li, Xiaobing;
Li, Xiaoqiang;
Zhang, Weizhao

Publication type:

Article

Tension fluctuation analysis and structure optimization of yarn carriers in the carbon fiber braiding machine.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6494, doi. 10.1002/pc.29373

By:

Du, Yage;
He, Lei;
An, Zhengyu;
Qi, Bin;
Dong, Benfengnian;
Wang, Yinghao

Publication type:

Article

Methacrylamide‐substituted para‐aramid as an innovative sizing agent for improving the mechanical properties of carbon fiber/vinyl ester resin composites.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6290, doi. 10.1002/pc.29360

By:

Yu, Boshi;
Zhang, Yiwei;
Liu, Yue;
Jin, Yewei;
Song, Yihu;
Peng, Mao

Publication type:

Article

Comparative study on flexural performances of carbon fiber reinforced polymers with micro‐, micro‐/nano‐, and nano‐sized aramid fiber interlayers.

Published in:

Polymer Composites, 2025, v. 46, n. 7, p. 6241, doi. 10.1002/pc.29356

By:

Hu, Yunsen;
Gao, Yuxuan;
Tan, Bo;
Hu, Xiaozhi;
Zhang, Jian

Publication type:

Article