Works about CARBIDE cutting tools
Results: 618
STATISTICAL EVALUATION OF CUTTING FORCE COMPONENTS AS A FUNCTION OF CUTTING EDGE RADIUS SIZE FOR MILLING OF AUSTENITIC STAINLESS STEEL AISI 316L.
- Published in:
- MM Science Journal, 2025, p. 8199, doi. 10.17973/MMSJ.2025_03_2025011
- By:
- Publication type:
- Article
A review on impact of micro-tools on micro-milling outcomes for aluminium alloy.
- Published in:
- Advances in Science & Technology Research Journal, 2025, v. 19, n. 3, p. 322, doi. 10.12913/22998624/200007
- By:
- Publication type:
- Article
The effect of the martensitic packet size on the machinability of modified AISI P20 prehardened mold steel.
- Published in:
- Journal of Materials Science, 2012, v. 47, n. 8, p. 3613, doi. 10.1007/s10853-011-6208-y
- By:
- Publication type:
- Article
Morphology and microstructure of MC carbide formed at different cooling rates in AISI M2 high speed steel.
- Published in:
- Journal of Materials Science, 2011, v. 46, n. 5, p. 1196, doi. 10.1007/s10853-010-4895-4
- By:
- Publication type:
- Article
Turning operation of AISI 4340 steel in flooded, near-dry and dry conditions: a comparative study on tool-work interface temperature.
- Published in:
- Mechanics & Mechanical Engineering, 2019, v. 23, n. 1, p. 172, doi. 10.2478/mme-2019-0023
- By:
- Publication type:
- Article
Effect of compacting pressure on microstructure and mechanical properties of carbide cutting tools.
- Published in:
- Powder Metallurgy, 2011, v. 54, n. 5, p. 585, doi. 10.1179/1743290110Y.0000000001
- By:
- Publication type:
- Article
Talaş Kaldırma İşleminde Sürtünme Katsayısının Kesme Kuvvetleri, Sıcaklık ve Kesici Takım Gerilmeleri Üzerine Etkisi.
- Published in:
- Journal of the Institute of Science & Technology / Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2023, v. 13, n. 2, p. 1176, doi. 10.21597/jist.1208621
- By:
- Publication type:
- Article
FEM based mathematical modelling of thrust force during drilling of Al7075-T6.
- Published in:
- Mechanics & Industry, 2020, v. 21, n. 4, p. 1, doi. 10.1051/meca/2020046
- By:
- Publication type:
- Article
Experimental investigation into characterization and machining of Al + SiCp nano-composites using coated carbide tool.
- Published in:
- Mechanics & Industry, 2020, v. 21, n. 3, p. 1, doi. 10.1051/meca/2020015
- By:
- Publication type:
- Article
Application of carbide cutting tools with nano-structured multilayer composite coatings for turning austenitic steels, type 16Cr-10NI.
- Published in:
- Mechanics & Industry, 2017, v. 18, p. 1, doi. 10.1051/meca/2017060
- By:
- Publication type:
- Article
Application of carbide cutting tools with nano-structured multilayer composite coatings for turning austenitic steels, type 16Cr-10NI.
- Published in:
- Mechanics & Industry, 2017, v. 18, n. 7, p. 1, doi. 10.1051/meca/2017060
- By:
- Publication type:
- Article
Methodology of formation of multi-layered coatings for carbide cutting tools.
- Published in:
- Mechanics & Industry, 2016, v. 17, p. 1, doi. 10.1051/meca/2016065
- By:
- Publication type:
- Article
Study of cutting properties and wear pattern of carbide tools with comprehensive chemical-thermal treatment and nano-structured/gradient wear-resistant coatings.
- Published in:
- Mechanics & Industry, 2016, v. 17, p. 1, doi. 10.1051/meca/2016072
- By:
- Publication type:
- Article
Influence of Cutting Parameters in Face Milling Semi-Solid AA 2024 Using a Carbide Tool Affecting the Surface Roughness and Tool Wear.
- Published in:
- Walailak Journal of Science & Technology, 2017, v. 14, n. 6, p. 441
- By:
- Publication type:
- Article
Characterization and Parametric Optimization of Performance Parameters of DLC-Coated Tungsten Carbide (WC) Tool Using TOPSIS.
- Published in:
- Coatings (2079-6412), 2021, v. 11, n. 7, p. 760, doi. 10.3390/coatings11070760
- By:
- Publication type:
- Article
Roughing Milling with Ceramic Tools in Comparison with Sintered Carbide on Nickel-Based Alloys.
- Published in:
- Coatings (2079-6412), 2021, v. 11, n. 6, p. 734, doi. 10.3390/coatings11060734
- By:
- Publication type:
- Article
Investigation of the Wear Behavior of PVD Coated Carbide Tools during Ti6Al4V Machining with Intensive Built Up Edge Formation.
- Published in:
- Coatings (2079-6412), 2021, v. 11, n. 3, p. 266, doi. 10.3390/coatings11030266
- By:
- Publication type:
- Article
Analysis of Surface Roughness and Flank Wear Using the Taguchi Method in Milling of NiTi Shape Memory Alloy with Uncoated Tools.
- Published in:
- Coatings (2079-6412), 2020, v. 10, n. 12, p. 1259, doi. 10.3390/coatings10121259
- By:
- Publication type:
- Article
Experimental Study on Tool Wear and Delamination in Milling CFRPs with TiAlN- and TiN-Coated Tools.
- Published in:
- Coatings (2079-6412), 2020, v. 10, n. 7, p. 623, doi. 10.3390/coatings10070623
- By:
- Publication type:
- Article
Machining GX2CrNiMoN26-7-4 DSS Alloy: Wear Analysis of TiAlN and TiCN/Al2O3/TiN Coated Carbide Tools Behavior in Rough End Milling Operations.
- Published in:
- Coatings (2079-6412), 2019, v. 9, n. 6, p. 392, doi. 10.3390/coatings9060392
- By:
- Publication type:
- Article
Tribological and Wear Performance of Carbide Tools with TiB<sub>2</sub> PVD Coating under Varying Machining Conditions of TiAl6V4 Aerospace Alloy.
- Published in:
- Coatings (2079-6412), 2017, v. 7, n. 11, p. 187, doi. 10.3390/coatings7110187
- By:
- Publication type:
- Article
In this Issue.
- Published in:
- International Wood Products Journal, 2019, v. 10, n. 2, p. 37, doi. 10.1080/20426445.2019.1639255
- Publication type:
- Article
Cutting performance of multilayer coated tungsten carbide in milling of wood composites.
- Published in:
- International Wood Products Journal, 2019, v. 10, n. 2, p. 78, doi. 10.1080/20426445.2019.1627050
- By:
- Publication type:
- Article
Effect of machining parameters on surface roughness in end milling of AISI 304 steel using uncoated solid carbide tools.
- Published in:
- Australian Journal of Mechanical Engineering, 2014, v. 12, n. 2, p. 223, doi. 10.7158/M12-079.2014.12.2
- By:
- Publication type:
- Article
DETERMINATION OF TEMPERATURE DURING DEPTH GRINDING AND CONDITIONS FOR ITS DECREASE.
- Published in:
- Fiability & Durability / Fiabilitate si Durabilitate, 2019, n. 1, p. 5
- By:
- Publication type:
- Article
OPTIMIZATION OF THE MACHINING PARAMETERS IN TURNING OF HARDENED HOT WORK TOOL STEEL USING CRYOGENICALLY TREATED TOOLS.
- Published in:
- Surface Review & Letters, 2020, v. 27, n. 5, p. N.PAG, doi. 10.1142/S0218625X19501774
- By:
- Publication type:
- Article
CHARACTERIZATION OF TiCN COATING SYNTHESIZED BY THE PLASMA ENHANCED PHYSICAL VAPOUR DEPOSITION PROCESS ON A CEMENTED CARBIDE TOOL.
- Published in:
- Surface Review & Letters, 2018, v. 25, n. 8, p. N.PAG, doi. 10.1142/S0218625X19500288
- By:
- Publication type:
- Article
TUNGSTEN OXIDES FORMATION ON THE INTERFACE OF THE CEMENTED CARBIDE AND THE INCONEL 182 OVERLAYS AT ELEVATED TEMPERATURE UP TO 800<sup>∘</sup>C.
- Published in:
- Surface Review & Letters, 2018, v. 25, n. 6, p. N.PAG, doi. 10.1142/S0218625X1850110X
- By:
- Publication type:
- Article
Prediction of surface quality and optimization of process parameters in drilling of Delrin using neural network.
- Published in:
- Progress in Rubber, Plastics & Recycling Technology, 2019, v. 35, n. 3, p. 149, doi. 10.1177/1477760619855078
- By:
- Publication type:
- Article
Effect of cutting tool with micro-pits texture on wood cutting performance.
- Published in:
- PLoS ONE, 2019, v. 14, n. 4, p. 1, doi. 10.1371/journal.pone.0214888
- By:
- Publication type:
- Article
The Effect of Cutting Parameters on The Hole Quality and Tool Wear During The Drilling of Inconel 718.
- Published in:
- Gazi University Journal of Science, 2012, v. 25, n. 2, p. 533
- By:
- Publication type:
- Article
Effect of Some Cutting Parameters on Surface Finish of Bright Mild Steel.
- Published in:
- Journal of Applied Sciences & Environmental Management, 2024, v. 28, n. 4, p. 1273, doi. 10.4314/jasem.v28i4.28
- By:
- Publication type:
- Article
Technology Features of Diamond Coating Deposition on a Carbide Tool.
- Published in:
- C, 2022, v. 8, n. 4, p. 77, doi. 10.3390/c8040077
- By:
- Publication type:
- Article
清洁切削高温合金涂层刀具切削性能及加工表面完整性.
- Published in:
- China Mechanical Engineering, 2023, v. 34, n. 4, p. 454, doi. 10.3969/j.issn.1004-132X.2023.04.010
- By:
- Publication type:
- Article
TURNING STUDIES OF DEEP CRYOGENIC TREATED P-40 TUNGSTEN CARBIDE CUTTING TOOL INSERTS - TECHNICAL COMMUNICATION.
- Published in:
- Machining Science & Technology, 2009, v. 13, n. 2, p. 269, doi. 10.1080/10910340902979754
- By:
- Publication type:
- Article
OPTIMIZATION OF THE CUTTING EDGE GEOMETRY OF COATED CARBIDE TOOLS IN DRY TURNING OF STEELS USING A FINITE ELEMENT ANALYSIS.
- Published in:
- Machining Science & Technology, 2009, v. 13, n. 1, p. 36, doi. 10.1080/10910340902776051
- By:
- Publication type:
- Article
CORRELATION BETWEEN DRILL GEOMETRY AND MECHANICAL FORCES IN MQL CONDITIONS.
- Published in:
- Machining Science & Technology, 2008, v. 12, n. 1, p. 133, doi. 10.1080/10910340801918275
- By:
- Publication type:
- Article
Computer Simulation of Orthogonal Cutting using a Tool with Multiple Coatings.
- Published in:
- Machining Science & Technology, 2004, v. 8, n. 2, p. 305, doi. 10.1081/MST-200029230
- By:
- Publication type:
- Article
ESTIMATION OF TOOL WEAR OF CARBIDE TOOL IN ORTHOGONAL CUTTING USING FEM SIMULATION.
- Published in:
- Machining Science & Technology, 2002, v. 6, n. 3, p. 467, doi. 10.1081/MST-120016256
- By:
- Publication type:
- Article
WEAR PERFORMANCE OF MULTILAYER-COATED CARBIDE TOOLS.
- Published in:
- Machining Science & Technology, 2001, v. 5, n. 1, p. 115, doi. 10.1081/MST-100103181
- By:
- Publication type:
- Article
Machining of Titanium Alloys with a Cemented Carbide Cutting Tools with Tungsten-Based Vacuum-Arc Nitride Coatings.
- Published in:
- Metallophysics & Advanced Technologies / Metallofizika i Novejsie Tehnologii, 2023, v. 45, n. 8, p. 993, doi. 10.15407/mfint.45.08.993
- By:
- Publication type:
- Article
切削工具用の高性能超硬合金の開発.
- Published in:
- Journal of the Japan Society of Powder & Powder Metallurgy / Funtai Oyobi Fummatsu Yakin, 2024, v. 71, n. 9, p. 327, doi. 10.2497/jjspm.23-00062
- By:
- Publication type:
- Article
AlTiBN 膜の難削材加工用工具への適用.
- Published in:
- Journal of the Japan Society of Powder & Powder Metallurgy / Funtai Oyobi Fummatsu Yakin, 2024, v. 71, n. 9, p. 349, doi. 10.2497/jjspm.23-00047
- By:
- Publication type:
- Article
Minimizing Tool Wear, Cutting Temperature and Surface Roughness in the Intermittent Turning of AISI D3 Steel Using the DF and GRA Method.
- Published in:
- Tribology in Industry, 2023, v. 45, n. 1, p. 89, doi. 10.24874/ti.1395.10.22.01
- By:
- Publication type:
- Article
Locally Resolved Residual Stress Measurements in (Al,Ti)N Coatings Using Raman Spectroscopy.
- Published in:
- Tribology in Industry, 2022, v. 44, n. 1, p. 143, doi. 10.24874/ti.1144.06.21.08
- By:
- Publication type:
- Article
Investigation on Tool Wear and Surface Characteristics in Hard Turning Under Air-Water Jet Spray Impingement Cooling Environment.
- Published in:
- Tribology in Industry, 2019, v. 41, n. 2, p. 172, doi. 10.24874/ti.2019.41.02.04
- By:
- Publication type:
- Article
Experimental Investigation on Tool Wear Behavior and Cutting Temperature during Dry Machining of Carbon Steel SAE 1030 Using KC810 and KC910 Coated Inserts.
- Published in:
- Tribology in Industry, 2018, v. 40, n. 1, p. 52, doi. 10.24874/ti.2018.40.01.04
- By:
- Publication type:
- Article
Possibilities of Application of High Pressure Jet Assisted Machining in Hard Turning with Carbide Tools.
- Published in:
- Tribology in Industry, 2017, v. 39, n. 2, p. 238, doi. 10.24874/ti.2017.39.02.11
- By:
- Publication type:
- Article
Performance of Cutting Tool with Cross-Chevron Surface Texture Filled with Green Synthesized Aluminium Oxide Nanoparticles.
- Published in:
- Scientific Reports, 2019, v. 9, n. 1, p. 1, doi. 10.1038/s41598-019-54346-0
- By:
- Publication type:
- Article
EFFECT OF CUTTING CONDITIONS ON CHIP-TOOL INTERFACE TEMPERATURE USING NUMERICAL METHODS.
- Published in:
- i-Manager's Journal on Mechanical Engineering, 2017, v. 7, n. 4, p. 27, doi. 10.26634/jme.7.4.13710
- By:
- Publication type:
- Article