Works about BLOWING agents

Results: 545

The effects of ether, ester, carbonate polyol and hydrophilic group contents on the mechanical properties and abrasion resistance of solvent-free water-based polyurethane foam.

Published in:

Journal of Polymer Research, 2025, v. 32, n. 4, p. 1, doi. 10.1007/s10965-025-04355-7

By:

Zeng, Wun-Syu;
Lee, Da-Kong;
Luo, Yong-Shen;
Rwei, Syang-Peng

Publication type:

Article

Dielectric behavior of EVA/EOC/xGnP ternary microcellular nanocomposites.

Published in:

Journal of Materials Science: Materials in Electronics, 2022, v. 33, n. 30, p. 23693, doi. 10.1007/s10854-022-09128-2

By:

Parida, Suryakanta;
Malik, Rajasmita;
Parida, R. K.;
Parida, B. N.;
Nayak, Nimai C.

Publication type:

Article

Polyurethane‐layered double hydroxide nanocomposite foam: in situ synthesis by reaction injection molding and characterization.

Published in:

Polymer International, 2022, v. 71, n. 9, p. 1072, doi. 10.1002/pi.6365

By:

Mukherjee, Moumita;
Mandal, Sujata;
Gnanasundaram, Saraswathy;
Das, Bhabendra Nath

Publication type:

Article

Polypropylene–nano‐silica nanocomposite foams: mechanisms underlying foamability, and foam microstructure, crystallinity and mechanical properties.

Published in:

Polymer International, 2020, v. 69, n. 4, p. 373, doi. 10.1002/pi.5959

By:

Kumar, Anish;
Patham, Bhaskar;
Mohanty, Smita;
Nayak, Sanjay Kumar

Publication type:

Article

Long‐term thermal conductivity of cyclopentane–water blown rigid polyurethane foams reinforced with different types of fillers.

Published in:

Polymer International, 2019, v. 68, n. 10, p. 1826, doi. 10.1002/pi.5893

By:

Santiago‐Calvo, Mercedes;
Tirado‐Mediavilla, Josías;
Ruiz‐Herrero, José Luis;
Villafañe, Fernando;
Rodríguez‐Pérez, Miguel Ángel

Publication type:

Article

Novel poly(aryl ether nitrile ketone) foams and the influence of copolymer structure on the foaming result.

Published in:

Polymer International, 2018, v. 67, n. 10, p. 1410, doi. 10.1002/pi.5661

By:

Zhao, Jiyong;
Wang, Zhipeng;
Wang, Honghua;
Zhou, Guangyuan

Publication type:

Article

Impact of nozzle temperature on dimensional and mechanical characteristics of low-density PLA.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1629, doi. 10.1007/s00170-023-11236-0

By:

de Freitas, Fernando;
Pegado, Hélio

Publication type:

Article

Process of simultaneously fabricating and foaming precursor using frictional heat generated during friction stir welding.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 5/6, p. 3207, doi. 10.1007/s00170-022-09508-2

By:

Hangai, Yoshihiko;
Morohashi, Hiromi;
Aoki, Yasuhiro;
Mitsugi, Hironao;
Fujii, Hidetoshi

Publication type:

Article

Research on cellular morphology and mechanical properties of microcellular injection–molded BCPP and its blends.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2223, doi. 10.1007/s00170-021-07389-5

By:

Wang, Jiachang;
Wang, Guilong;
Zhao, Jinchuan;
Zhang, Aimin;
Dong, Guiwei;
Wang, Xiebin;
Zhao, Guoqun;
Park, Chul B.

Publication type:

Article

Diglycolamide phenolic foams as sorbent for rare earth elements.

Published in:

Materials Research Innovations, 2023, v. 27, n. 6, p. 429, doi. 10.1080/14328917.2023.2182486

By:

Bekkar, Fatima;
Arrambide, Carlos;
El Khoueiry, Claudine;
Meghabar, Rachid;
Arrachart, Guilhem;
Pellet-Rostaing, Stéphane

Publication type:

Article

Utilization of Glycerol for Glycerol Carbonate Synthesis via Transesterfication Reaction over Bio-Char Catalyst prepared from reed plant.

Published in:

Journal of Engineering (17264073), 2020, v. 26, n. 4, p. 202, doi. 10.31026/j.eng.2020.04.14

By:

Mohammed, Shafaa D.;
Ahmed, Muthana J.

Publication type:

Article

Evaluation and characterization of polyethylene composites with β-cyclodextrin andβ-cyclodextrin-based derivatives as foaming nucleating agent.

Published in:

Journal of Macromolecular Science: Pure & Applied Chemistry, 2024, v. 61, n. 6, p. 429, doi. 10.1080/10601325.2024.2345910

By:

Jin, Shuang;
Liu, Xiaoke;
Yang, Jiaxin;
Zhou, Yuhui

Publication type:

Article

MEETING THE ADDITIVE CHALLENGE.

Published in:

CoatingsTech, 2022, v. 19, n. 8, p. 34

By:

Gosselin, Cynthia A.

Publication type:

Article

Effect of PVC plastisol composition and processing conditions on foam expansion and tear strength.

Published in:

Chemical Industry / Hemijska Industrija, 2014, v. 68, n. 6, p. 701, doi. 10.2298/HEMIND140210028R

By:

Radovanović, Rajko;
Jašo, Vladislav;
Pilić, Branka;
Stoiljković, Dragoslav

Publication type:

Article

The influence of holmium on catalytic properties of Fe or Cu-modified vermiculites.

Published in:

Physicochemical Problems of Mineral Processing, 2019, v. 55, n. 6, p. 1484, doi. 10.5277/ppmp19074

By:

Samojeden, Bogdan;
Grzybek, Teresa;
Kowal, Joanna;
Szymaszek, Agnieszka;
Jabłońska, Magdalena;
Gläser, Roger;
Motak, Monika

Publication type:

Article

Surface free energy of extruded polymer compositions.

Published in:

Physicochemical Problems of Mineral Processing, 2019, v. 55, n. 6, p. 1509, doi. 10.5277/ppmp19076

By:

Garbacz, Tomasz

Publication type:

Article

Environmental Evaluation on Rigid Polyurethane Foam Disposal from Refrigerator Waste in Thailand.

Published in:

EnvironmentAsia, 2019, v. 12, p. 74, doi. 10.14456/ea.2019.65

By:

Soraya Suwannafon;
Nattharika Rittippant;
Alice Sharp;
Shigeo Nishikizawa;
Pawadee Methacanon;
Noramon Intaranont;
Premrudee Kanchanapiya

Publication type:

Article

CO2-releasing blowing agents from modified polyethylenimines slightly consume isocyanate groups while foaming polyurethanes.

Published in:

Arabian Journal of Chemistry, 2020, v. 13, n. 1, p. 3226, doi. 10.1016/j.arabjc.2018.10.007

By:

Long, Yuanzhu;
An, Jianing;
Xie, Xingyi

Publication type:

Article

A Chemical Blowing Strategy to Fabricate Biomass‐Derived Carbon‐Aerogels with Graphene‐Like Nanosheet Structures for High‐Performance Supercapacitors.

Published in:

ChemSusChem, 2019, v. 12, n. 11, p. 2462, doi. 10.1002/cssc.201900267

By:

Zhang, Hai;
Zhang, Ze;
Luo, Jin‐Di;
Qi, Xing‐Tao;
Yu, Ji;
Cai, Jian‐Xin;
Wei, Jun‐chao;
Yang, Zhen‐Yu

Publication type:

Article

A Review on Physical Foaming of Thermoplastic and Vulcanized Elastomers.

Published in:

2022

By:

Wentao Zhai;
Junjie Jiang;
Park, Chul B.

Publication type:

Literature Review

We AIM to Please.

Published in:

ASHRAE Journal, 2022, v. 64, n. 5, p. 64

By:

PEARSON, ANDY

Publication type:

Article

Interior Spray Foam.

Published in:

ASHRAE Journal, 2020, v. 62, n. 2, p. 60

By:

LSTIBUREK, JOSEPH W.

Publication type:

Article

Tuning cellular structure in a previously developed microcellular acrylonitrile butadiene styrene/thermoplastic polyurethane blend foams.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 11, p. 5351, doi. 10.1002/pen.26920

By:

Khaleghi, Sara;
Azdast, Taher;
Hasanzadeh, Rezgar;
Park, Chul B.;
Rasouli, Asghar

Publication type:

Article

Microstructure and performances of rigid polyurethane foam prepared using double‐effect baking powder as a foaming agent.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 9, p. 4456, doi. 10.1002/pen.26860

By:

Cheng, Guojun;
Zhang, Yaling;
Liu, Song;
Zhou, Longxuan;
Tang, Zhongfeng;
Wang, Xiaodong;
Ding, Guoxin;
Wan, Xianglong;
Cao, Lishuo;
Zhu, Ziyue

Publication type:

Article

Investigation of swelling degree of polypropylene beads with monomers and blowing agents.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 7, p. 3399, doi. 10.1002/pen.26783

By:

Everton, Stefanni S.;
Gusmão, Marcos;
Oechsler, Bruno F.;
Castor, Carlos A.;
Pinto, J. C.

Publication type:

Article

Effect of polydiborosiloxane on the mechanical properties of silicone rubber foam with dual network structure.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 5, p. 1971, doi. 10.1002/pen.26663

By:

Ma, Xinguo;
Luo, Chao;
Zeng, Hongwen;
Peng, Yan;
Zhao, Lijuan;
Zhang, Fengshun

Publication type:

Article

The relationship between cellular microstructure and the mechanical properties of styrene/methyl methacrylate copolymer‐silica nanocomposite foams prepared by a supercritical CO2 blowing agent.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 4, p. 1601, doi. 10.1002/pen.26638

By:

Salari, Ehsan;
Rezaei, Mostafa;
Jahani, Davoud;
Tabbakhi‐Mamaqani, Ahmadreza

Publication type:

Article

Fabrication of electrically conductive interconnected microcellular thermoplastic elastomeric foam composite for absorption dominating electromagnetic interference shielding with ultra low reflection.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 3, p. 1194, doi. 10.1002/pen.26607

By:

Nayak, Jasomati;
Das, Palash;
Katheria, Ankur;
Giri, Soumen;
Banerji, Pallab;
Das, Narayan Chandra

Publication type:

Article

Characterization of polymer foam evolution in unpressurized melt systems.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 2, p. 469, doi. 10.1002/pen.26559

By:

Pritchard, Alex J.;
Martin, Peter J.;
McCourt, Mark P.;
Kearns, Mark P.;
Cunningham, Eoin

Publication type:

Article

Determination of electromagnetic traveling path in polymer/multi‐walled carbon nanotube nanocomposite foams and analysis by Taguchi technique.

Published in:

Polymer Engineering & Science, 2024, v. 64, n. 1, p. 87, doi. 10.1002/pen.26530

By:

Azerang, Bashar;
Azdast, Taher;
Doniavi, Ali;
Hasanzadeh, Rezgar

Publication type:

Article

The effect of water and sodium hydrogen carbonate content on flexible polyurethane's microstructure, water, and mechanical properties.

Published in:

Polymer Engineering & Science, 2023, v. 63, n. 1, p. 295, doi. 10.1002/pen.26205

By:

Fawzi, Tarek;
Al‐Talib, Ammar A. M.

Publication type:

Article

Lightweight and tough PVDF foams via high‐pressure foam injection molding with core‐back operation.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 11, p. 3543, doi. 10.1002/pen.26125

By:

Weng, Zhengsheng;
Ren, Qian;
Wu, Minghui;
Zhu, Xiuyu;
Li, Wanwan;
Wang, Long;
Zheng, Wenge

Publication type:

Article

Improving crystallization properties of PBSA by blending PBS as a polymeric nucleating agent to prepare high‐performance PPC/PBSA/AX8900 blown films.

Published in:

Polymer Engineering & Science, 2022, v. 62, n. 4, p. 1166, doi. 10.1002/pen.25915

By:

Jiang, Guo;
Wang, Haiting;
Yu, Li;
Li, Huili

Publication type:

Article

Modeling flow and cell formation in foam sheet extrusion of polystyrene with CO2 and co‐blowing agents. Part I: Material model.

Published in:

Polymer Engineering & Science, 2021, v. 61, n. 11, p. 2799, doi. 10.1002/pen.25800

By:

Breuer, Robert;
Hendriks, Sven;
Reinhardt, Nicolas;
Facklam, Martin;
Hopmann, Christian

Publication type:

Article

Modeling flow and cell formation in foam sheet extrusion of polystyrene with CO2 and co‐blowing agents. Part II: Process model.

Published in:

Polymer Engineering & Science, 2021, v. 61, n. 10, p. 2701, doi. 10.1002/pen.25797

By:

Breuer, Robert;
Hendriks, Sven;
Reinhardt, Nicolas;
Facklam, Martin;
Hopmann, Christian

Publication type:

Article

Evaluation of the salt leaching method for the production of ethylene propylene diene monomer rubber foams.

Published in:

Polymer Engineering & Science, 2021, v. 61, n. 1, p. 136, doi. 10.1002/pen.25563

By:

Zonta, Edoardo;
Valentini, Francesco;
Dorigato, Andrea;
Fambri, Luca;
Pegoretti, Alessandro

Publication type:

Article

Exploitation of acetalization process of poly(vinyl alcohol) for the formation of crosslinked poly(vinyl formal) foams.

Published in:

Polymer Engineering & Science, 2020, v. 60, n. 8, p. 2023, doi. 10.1002/pen.25449

By:

Liao, Honghui;
Liu, Yuan;
Lin, Shudong

Publication type:

Article

Enhanced foamability of isotactic polypropylene/polypropylene‐grafted‐nanosilica nanocomposites in supercritical carbon dioxide.

Published in:

Polymer Engineering & Science, 2020, v. 60, n. 6, p. 1353, doi. 10.1002/pen.25386

By:

Yuan, Wenjing;
Wang, Feng;
Gao, Chong;
Liu, Peng;
Ding, Yanfen;
Zhang, Shimin;
Yang, Mingshu

Publication type:

Article

Improvement of the dispersity of micro‐nano particles for PP/PVC composites using gas‐assisted dispersion in a controlled foaming process.

Published in:

Polymer Engineering & Science, 2020, v. 60, n. 3, p. 524, doi. 10.1002/pen.25308

By:

Zhou, Ying‐Guo;
Zhao, Xu‐Dong;
Dong, Bin‐Bin;
Liu, Chun‐Tai

Publication type:

Article

Micro/nanocellular polyprolene/trans‐1,4‐polyisomprene (PP/TPI) blend foams by using supercritical nitrogen as blowing agent.

Published in:

Polymer Engineering & Science, 2020, v. 60, n. 1, p. 211, doi. 10.1002/pen.25274

By:

Zou, Li;
Li, Huan;
Wang, Dan;
Ma, Leyuan;
Prakashan, Kundil;
Zhang, Zhen Xiu

Publication type:

Article

Preparation of fast‐degrading poly(lactic acid)/soy protein concentrate biocomposite foams via supercritical CO2 foaming.

Published in:

Polymer Engineering & Science, 2019, v. 59, n. 9, p. 1753, doi. 10.1002/pen.25175

By:

Liu, Tong;
Peng, Xiang‐Fang;
Mi, Hao‐Yang;
Li, Heng;
Turng, Lih‐Sheng;
Xu, Bai‐Ping

Publication type:

Article

Foam Extrusion of LDPE With Solid Phase CO2 as Blowing Agent.

Published in:

Polymer Engineering & Science, 2015, v. 55, n. 12, p. 2821, doi. 10.1002/pen.24173

By:

Hopmann, Christian;
Hendriks, Sven;
Feldges, Robert

Publication type:

Article

Morphological analysis of microcellular PP produced in a core-back injection process using chemical blowing agents and gas counter pressure.

Published in:

Polymer Engineering & Science, 2015, v. 55, n. 11, p. 2465, doi. 10.1002/pen.24136

By:

Reglero Ruiz, José Antonio;
Vincent, Michel;
Agassant, Jean‐François;
Claverie, Aurore;
Huck, Sébastien

Publication type:

Article

Vulcanization of EPDM rubber compounds with and without blowing agents: Identification of reaction events and TTT-diagram using DSC data.

Published in:

Polymer Engineering & Science, 2015, v. 55, n. 9, p. 2073, doi. 10.1002/pen.24049

By:

Restrepo‐Zapata, Nora Catalina;
Osswald, Tim A.;
Hernández‐Ortiz, Juan Pablo

Publication type:

Article

Effect of crosslinking density on resilient performance of low-resilience flexible polyurethane foams.

Published in:

Polymer Engineering & Science, 2015, v. 55, n. 2, p. 308, doi. 10.1002/pen.23888

By:

Lei, Yanzhou;
Zhou, Shengtai;
Zou, Huawei;
Liang, Mei

Publication type:

Article

The influence of injection molding parameters and blowing agent addition on selected properties, surface state, and structure of HDPE parts.

Published in:

Polymer Engineering & Science, 2013, v. 53, n. 4, p. 780, doi. 10.1002/pen.23316

By:

Bociaga, Elzbieta;
Palutkiewicz, Pawel

Publication type:

Article

Correction: An improved intumescent flame-retardant epoxy resin with hydroxylated melamine as both charring and blowing agent.

Published in:

2023

By:

Chen, Tao;
Liu, Xin-Ya;
Wang, Ting;
He, Lei;
Deng, Jin-Ni;
Fu, Zhi-Cheng;
Zhao, Tian-Bao;
Xia, Chang-Lin;
Liu, Zhi-hui;
Chen, Ming-Jun

Publication type:

Correction Notice

An improved intumescent flame-retardant epoxy resin with hydroxylated melamine as both charring and blowing agent.

Published in:

Journal of Thermal Analysis & Calorimetry, 2023, v. 148, n. 19, p. 10103, doi. 10.1007/s10973-023-12361-4

By:

Chen, Tao;
Liu, Xin-Ya;
Wang, Ting;
He, Lei;
Deng, Jin-Ni;
Fu, Zhi-Cheng;
Zhao, Tian-Bao;
Xia, Chang-Lin;
Liu, Zhi-hui;
Chen, Ming-Jun

Publication type:

Article

Mechanical properties and thermal characteristics of different-density phenolic foams.

Published in:

Journal of Thermal Analysis & Calorimetry, 2021, v. 144, n. 2, p. 393, doi. 10.1007/s10973-020-10361-2

By:

Chen, Xiaokun;
Yu, Wencong;
Ma, Li;
Zhou, Shasha;
Liu, Xixi

Publication type:

Article

Solid and microcellular polylactide nucleated with PLA stereocomplex and cellulose nanocrystals.

Published in:

Journal of Thermal Analysis & Calorimetry, 2020, v. 142, n. 2, p. 695, doi. 10.1007/s10973-020-09477-2

By:

Boruvka, Martin;
Behalek, Lubos;
Lenfeld, Petr;
Brdlik, Pavel;
Habr, Jiri;
Wongmanee, Sorasak;
Bobek, Jiri;
Pechociakova, Miroslava

Publication type:

Article