Works about ALLOY testing

Results: 552

Effect of neodymium on mechanical behavior of Mg-Zn-Zr magnesium alloy.

Published in:

Journal of Materials Science Letters, 2003, v. 22, n. 6, p. 445, doi. 10.1023/A:1022911728702

By:

Wu, Wei;
Wang, Yue;
Zeng, Xia;
Chen, Lijia;
Liu, Zheng

Publication type:

Article

A High-Speed Rotational Diamond Anvil Cell for In Situ Analysis of Hierarchical Microstructural Evolution of Metallic Alloys during Extreme Shear Deformation.

Published in:

2023

By:

Devaraj, Arun;
Liu, Tingkun;
Park, Changyong;
Sinogeikin, Stanislav

Publication type:

Abstract

Nondestructive Testing of an Aluminum Alloy Welded Joint Based on a Mathematical Model of the Thermal Welding Process and Computer Microtomography.

Published in:

Russian Journal of Nondestructive Testing, 2023, v. 59, n. 4, p. 477, doi. 10.1134/S1061830923700341

By:

Syryamkin, V. I.;
Khilchuk, M. D.;
Klestov, S. A.

Publication type:

Article

The application of principal-component analysis during eddy-current testing of aluminum alloys.

Published in:

Russian Journal of Nondestructive Testing, 2015, v. 51, n. 10, p. 633, doi. 10.1134/S1061830915100034

By:

Polyakov, V.;
Egorov, A.

Publication type:

Article

ОТРИМАННЯ ЖАРОМІЦНИХ ТИТАНОВИХ СПЛАВІВ СИСТЕМИ Ti–Al–Zr–Si–Mo–Nb–Sn СПОСОБОМ ЕЛЕКТРОННО-ПРОМЕНЕВОЇ ПЛАВКИ.

Published in:

Electrometallurgy Today / Sovremennaya Elektrometallurgiya, 2022, n. 2, p. 3, doi. 10.37434/sem2022.02.01

By:

Ахонін, С. В.;
Березос, В. О.;
Пікулін, О. М.;
Северин, А. Ю.;
Котенко, О. О.;
Кузьменко, М. М.;
Кулак, Л. Д.;
Шевченко, О. М.

Publication type:

Article

AUTOMATED NON-DESTRUCTIVE TESTING OF STEEL ALLOYS MICROSTRUCTURE BASED ON MULTIFREQUENCY EDDY CURRENT METHOD.

Published in:

Technical Diagnostics & Nondestructive Testing / Tekhnicheskaya Diagnostika I Nerazrushayushchiy Kontrol, 2022, n. 1, p. 39, doi. 10.37434/tdnk2022.01.04

By:

Kalenychenko, Yu. O.;
Bazhenov, V. G.;
Ratsebarskiy, S. S.;
Kalenychenko, O. G.;
Калениченко, Ю. О.;
Баженов, В. Г.;
Рацебарський, С. C.;
Калениченко, О. Г.

Publication type:

Article

Знеміцнення метастабільних евтектичних стопів за повторного навантажування в області мікропластичності

Published in:

Metallophysics & Advanced Technologies / Metallofizika i Novejsie Tehnologii, 2021, v. 43, n. 3, p. 339, doi. 10.15407/mfint.43.03.0339

By:

Коршак, В. Ф.;
Воронцова, Р. І.;
Бойко, Ю. І.

Publication type:

Article

The Influence of Friction Parameters and Material Type on Results in the Block-on-Ring Friction System.

Published in:

Lubricants (2075-4442), 2025, v. 13, n. 2, p. 94, doi. 10.3390/lubricants13020094

By:

Madej, Marcin;
Leszczyńska-Madej, Beata

Publication type:

Article

Effect of Varying the Volume Fractions of Ledeburitic Cementite and Graphite on the Tribological Properties of Commercially Used Cast Irons.

Published in:

Lubricants (2075-4442), 2023, v. 11, n. 12, p. 498, doi. 10.3390/lubricants11120498

By:

Frocisz, Łukasz;
Matusiewicz, Piotr;
Krawczyk, Janusz

Publication type:

Article

Microfabrication, Characterization, and Cold-Test Study of the Slow-Wave Structure of a Millimeter-Band Backward-Wave Oscillator with a Sheet Electron Beam.

Published in:

Electronics (2079-9292), 2022, v. 11, n. 18, p. N.PAG, doi. 10.3390/electronics11182858

By:

Starodubov, Andrey;
Torgashov, Roman;
Galushka, Viktor;
Pavlov, Anton;
Titov, Vladimir;
Ryskin, Nikita;
Abhishek, Anand;
Kumar, Niraj

Publication type:

Article

High temperature properties of Cu–Cr–Zr alloys processed by conventional inverse extrusion of atomised powders and comparison with Conform consolidated powders.

Published in:

Powder Metallurgy, 2009, v. 52, n. 2, p. 124, doi. 10.1179/174329008X293723

By:

Poblano-Salas, C. A.

Publication type:

Article

INVESTIGATION OF THE INFLUENCE OF TECHNOLOGICAL CONDITIONS OF MICROARC OXIDATION OF MAGNESIUM ALLOYS ON THEIR STRUCTURAL STATE AND MECHANICAL PROPERTIES.

Published in:

Eastern-European Journal of Enterprise Technologies, 2017, v. 2, n. 5, p. 39, doi. 10.15587/1729-4061.2017.96721

By:

Belozerov, V.;
Mahatilova, A.;
Sobol, O.;
Subbotina, V.;
Subbotin, A.

Publication type:

Article

Corrosion and degradation behavior of MCSTE-Processed AZ31 magnesium alloy.

Published in:

Scientific Reports, 2025, v. 15, n. 1, p. 1, doi. 10.1038/s41598-025-88161-7

By:

Abdelfattah, Khaled B.;
Abbas, Marwa A.;
El-Garaihy, Waleed H.;
Mohamed, Adel M. A.;
Salem, Hanadi G.

Publication type:

Article

Fatigue crack growth and delamination behaviours of advanced Al-Li alloy laminate under single tensile overload.

Published in:

Fatigue & Fracture of Engineering Materials & Structures, 2016, v. 39, n. 1, p. 47, doi. 10.1111/ffe.12319

By:

Huang, Y.;
Liu, J. Z.;
Huang, X.;
Zhang, J. Z.;
Yue, G. Q.

Publication type:

Article

COMPARATIVE ANALYSIS OF MACHINABILITY OF NITINOL ALLOY USING WEIGHTED RADAR DIAGRAM.

Published in:

Management & Production Engineering Review (MPER), 2017, v. 8, n. 4, p. 74, doi. 10.1515/mper-2017-0038

By:

Kowalczyk, Małgorzata;
Niżankowski, Czesław

Publication type:

Article

Deformation behavior at cryogenic temperature in extruded Mg–Al–Zn alloy.

Published in:

Philosophical Magazine Letters, 2022, v. 102, n. 11/12, p. 396, doi. 10.1080/09500839.2022.2143592

By:

Somekawa, Hidetoshi;
Ogawa, Yukiko;
Ono, Yoshinori;
Singh, Alok

Publication type:

Article

The use of DSC curves and Kronmüller theory to study the level of structural defects of Fe-based bulk amorphous alloys.

Published in:

Bulletin of the Polish Academy of Sciences: Technical Sciences, 2023, v. 71, n. 2, p. 1, doi. 10.24425/bpasts.2023.144613

By:

JEŻ, Bartłomiej;
NABIAŁEK, Marcin

Publication type:

Article

Elevated-temperature tensile deformation and fracture behavior of particle-reinforced PM 8009Al matrix composite.

Published in:

Bulletin of the Polish Academy of Sciences: Technical Sciences, 2021, v. 69, n. 5, p. 1, doi. 10.24425/bpasts.2021.138846

By:

Shuang CHEN;
Guoqiang CHEN;
Pingping GAO;
Chunxuan LIU;
Anru WU;
Lijun DONG;
Zhonghua HUANG;
Chun OUYANG;
Hui ZHANG

Publication type:

Article

Microstructure and Mechanical Properties of AlSi12CuNi Alloy Fabricated by Laser Powder Bed Fusion Process.

Published in:

International Journal of Automation Technology, 2021, v. 15, n. 4, p. 388, doi. 10.20965/ijat.2021.p0388

By:

Hirayama, Akihiro;
Kimura, Masaaki;
Kusaka, Masahiro;
Kaizu, Koichi

Publication type:

Article

Mechanical properties of a dissimilar aluminum alloy joint welded by hybrid laser-MIG welding.

Published in:

International Journal of Modern Physics B: Condensed Matter Physics; Statistical Physics; Applied Physics, 2017, v. 31, n. 16-19, p. -1, doi. 10.1142/S0217979217440374

By:

Wang, Qiuying;
Chen, Hui;
Zhu, Zongtao;
Cui, Yunlong

Publication type:

Article

Technology of coaxial laser gas-powder surfacing of alloys of the Mo+NiCrBSi system.

Published in:

Welding International, 2015, v. 29, n. 6, p. 481, doi. 10.1080/09507116.2014.941676

By:

Yegunov, A.I.;
Artemenko, Yu.A.;
Konoreva, N.A.;
Usikova, N.Yu.

Publication type:

Article

Main technological special features of brazing steels with a composite brazing alloy of the chromium–nickel–manganese system.

Published in:

Welding International, 2015, v. 29, n. 6, p. 488, doi. 10.1080/09507116.2014.941675

By:

Novosadov, V.S.

Publication type:

Article

Investigation of the processes of surfacing joint faces in turbine casings in nuclear power stations.

Published in:

Welding International, 2015, v. 29, n. 6, p. 479, doi. 10.1080/09507116.2014.941673

By:

Artemenko, Yu.A.;
Fedyukin, E.S.;
Gusev, A.A.;
Neranov, A.A.

Publication type:

Article

Technology of brazing and heat treatment of brazed joints in creep-resisting deformable (EP975) and cast single crystal intermetallic (VKNA-4U) alloys.

Published in:

Welding International, 2015, v. 29, n. 6, p. 471, doi. 10.1080/09507116.2014.941671

By:

Lukin, V.I.;
Rylnikov, V.S.;
Bazyleva, O.A.;
Afanasyev-Khodykin, A.N.

Publication type:

Article

Microjoining of Ti–Ni alloy and stainless steel using resistance brazing method aided by numerical simulation.

Published in:

Welding International, 2015, v. 29, n. 6, p. 417, doi. 10.1080/09507116.2014.921068

By:

Takeshita, Kunimasa;
Itoh, Taku

Publication type:

Article

Influence of the brazing process parameters on the microstructural characteristics of copper alloy joints.

Published in:

Welding International, 2009, v. 23, n. 8, p. 606, doi. 10.1080/09507110802543229

By:

Merlin, M.;
Crepaldi, I.;
Garagnani, G.L.;
Trebbi, L

Publication type:

Article

Brazing of metals - consumables, technologies and standardisation.

Published in:

Welding International, 2008, v. 22, n. 4, p. 245, doi. 10.1080/09507110802117669

By:

Winiowski, A.

Publication type:

Article

Welding of Al-alloys by the plasma method - benefits and limitations.

Published in:

Welding International, 2007, v. 21, n. 9, p. 651, doi. 10.1080/09507110701631109

By:

Pfeifer, T.;
Skiba, J.;
Rozanski, M.

Publication type:

Article

Comparison of Hot-rolled Unalloyed Magnesium and Magnesium Alloys in terms of Biodegradability and Mechanical Properties .

Published in:

Gazi University Journal of Science, 2022, v. 35, n. 3, p. 1022, doi. 10.35378/gujs.825071

By:

INCESU, Alper;
GUNGOR, Ali

Publication type:

Article

ALUMINIUM METAL MATRIX COMPOSITES - A REVIEW.

Published in:

Reviews on Advanced Materials Science, 2014, v. 38, n. 1, p. 55

By:

Vijaya Ramnath, B.;
Elanchezhian, C.;
Annamalai, R. M.;
Aravind, S.;
Sri Ananda Atreya, T.;
Vignesh, V.;
Subramanian, C.

Publication type:

Article

GRAIN BOUNDARY PHENOMENA IN NdFeB-BASED HARD MAGNETIC ALLOYS.

Published in:

Reviews on Advanced Materials Science, 2014, v. 38, n. 1, p. 17

By:

Straumal, B. B.;
Mazilkin, A. A.;
Protasova, S. G.;
Gusak, A. M.;
Bulatov, M. F.;
Straumal, A. B.;
Baretzky, B.

Publication type:

Article

In-Line Test Structures and Non-destructive Characterization of Electromigration-Driven Phase Evolution in Microscale Solder Joints.

Published in:

Journal of Electronic Materials, 2024, v. 53, n. 6, p. 3070, doi. 10.1007/s11664-024-11043-7

By:

Jois, Chetan;
Chou, Pei-En;
Subbarayan, Ganesh

Publication type:

Article

Effect of Sb and Ag Addition and Aging on the Microstructural Evolution, IMC Layer Growth, and Mechanical Properties of Near-Eutectic Sn-Bi Alloys.

Published in:

Journal of Electronic Materials, 2024, v. 53, n. 3, p. 1284, doi. 10.1007/s11664-023-10866-0

By:

Fowler, Hannah N.;
Puttur Lakshminarayana, Sukshitha Achar;
Lai, Sean Yenyu;
Tay, Sui Xiong;
Masaeng, Aleena;
Subbarayan, Ganesh;
Blendell, John E.;
Handwerker, Carol A.

Publication type:

Article

A performance comparison of additive manufactured creep-resistant superalloys.

Published in:

Science & Technology of Welding & Joining, 2023, v. 28, n. 7, p. 525, doi. 10.1080/13621718.2023.2187925

By:

James, William Sean;
Ganguly, Supriyo;
Pardal, Goncalo

Publication type:

Article

Solidification cracking test of aluminium alloy 5052.

Published in:

Science & Technology of Welding & Joining, 2022, v. 27, n. 4, p. 301, doi. 10.1080/13621718.2022.2051410

By:

Soysal, Tayfun;
Kou, Sindo

Publication type:

Article

Formal translation of YAWL workflow models to the Alloy formal specifications: a testing application.

Published in:

Software & Systems Modeling, 2023, v. 22, n. 3, p. 941, doi. 10.1007/s10270-022-01043-8

By:

Rivadeh, Mehran;
Mirian-Hosseinabadi, Seyed-Hassan

Publication type:

Article

ZrB nanoparticle induced nano-LPSO-grain and nano-LPSO-layer reinforced ultra-high strength Mg-RE alloy.

Published in:

Journal of Materials Science, 2013, v. 48, n. 24, p. 8368, doi. 10.1007/s10853-013-7647-4

By:

Paramsothy, Muralidharan;
Gupta, Manoj

Publication type:

Article

An investigation of second phases in as-cast AZ31 magnesium alloys with different Sr contents.

Published in:

Journal of Materials Science, 2013, v. 48, n. 16, p. 5456, doi. 10.1007/s10853-013-7339-0

By:

Wu, Lu;
Pan, Fusheng;
Yang, Mingbo;
Cheng, Renju

Publication type:

Article

Springback and anelasticity of mg alloys measured in three-point bending.

Published in:

Journal of Materials Science, 2013, v. 48, n. 15, p. 5361, doi. 10.1007/s10853-013-7331-8

By:

Munitz, A.;
Kaufman, M.

Publication type:

Article

Hot workability analysis with processing map and texture characteristics of as-cast TX32 magnesium alloy.

Published in:

Journal of Materials Science, 2013, v. 48, n. 15, p. 5236, doi. 10.1007/s10853-013-7314-9

By:

Dharmendra, C.;
Rao, K.;
Prasad, Y.;
Hort, N.;
Kainer, K.

Publication type:

Article

The significance of grain boundary sliding in the superplastic Zn-22 % Al alloy processed by ECAP.

Published in:

Journal of Materials Science, 2013, v. 48, n. 13, p. 4730, doi. 10.1007/s10853-012-7104-9

By:

Kawasaki, Megumi;
Langdon, Terence

Publication type:

Article

Using ball indentation to determine the mechanical properties of an Al-7475 alloy processed by high-pressure torsion.

Published in:

Journal of Materials Science, 2013, v. 48, n. 13, p. 4773, doi. 10.1007/s10853-012-6969-y

By:

Patil, Deepak;
Kori, S.;
Venkateswarlu, K.;
Das, Gautam;
Alhajeri, Saleh;
Langdon, Terence

Publication type:

Article

Structural and hardness inhomogeneities in Mg-Al-Zn alloys processed by high-pressure torsion.

Published in:

Journal of Materials Science, 2013, v. 48, n. 13, p. 4661, doi. 10.1007/s10853-013-7176-1

By:

Al-Zubaydi, Ahmed;
Figueiredo, Roberto;
Huang, Yi;
Langdon, Terence

Publication type:

Article

Effect of severe plastic deformation on creep behaviour of a Ti-6Al-4V alloy.

Published in:

Journal of Materials Science, 2013, v. 48, n. 13, p. 4789, doi. 10.1007/s10853-013-7160-9

By:

Kral, Petr;
Dvorak, Jiri;
Zherebtsov, Sergey;
Salishchev, Gennady;
Kvapilova, Marie;
Sklenicka, Vaclav

Publication type:

Article

A comparative study on the effects of three commercial Ti-B-based grain refiners on the impact properties of A356 cast aluminium alloy.

Published in:

Journal of Materials Science, 2013, v. 48, n. 12, p. 4365, doi. 10.1007/s10853-013-7252-6

By:

Casari, Daniele;
Merlin, Mattia;
Garagnani, Gian

Publication type:

Article

Effect of upset forging on microstructure and tensile properties in a devitrified Al-Ni-Co-Y Alloy.

Published in:

Journal of Materials Science, 2013, v. 48, n. 10, p. 3841, doi. 10.1007/s10853-013-7185-0

By:

Gordillo, M.;
Zhang, L.;
Watson, T.;
Aindow, M.

Publication type:

Article

Effect of annealing twins on crack initiation under high cycle fatigue conditions.

Published in:

Journal of Materials Science, 2013, v. 48, n. 6, p. 2376, doi. 10.1007/s10853-012-7021-y

By:

Castelluccio, Gustavo;
McDowell, David

Publication type:

Article

Microstructures, mechanical properties and in vitro corrosion behaviour of biodegradable Mg-Zr-Ca alloys.

Published in:

Journal of Materials Science, 2013, v. 48, n. 4, p. 1632, doi. 10.1007/s10853-012-6920-2

By:

Zhou, Ying-Long;
Li, Yuncang;
Luo, Dong-Mei;
Wen, Cuie;
Hodgson, Peter

Publication type:

Article

Characterization of topologically close-packed phases in secondary reaction zone in a coated CMSX-4 single crystal Ni-based superalloy.

Published in:

Journal of Materials Science, 2013, v. 48, n. 3, p. 1085, doi. 10.1007/s10853-012-6840-1

By:

Tan, X.;
Hong, H.;
Choi, B.;
Kim, I.;
Jo, C.;
Jin, T.;
Hu, Z.

Publication type:

Article

Loss of coherency and interphase α/β angular deviation from the Burgers orientation relationship in a Ti-6Al-4V alloy compressed at 800 °C.

Published in:

Journal of Materials Science, 2013, v. 48, n. 3, p. 1100, doi. 10.1007/s10853-012-6842-z

By:

Cabibbo, M.;
Zherebtsov, S.;
Mironov, S.;
Salishchev, G.

Publication type:

Article