Works about ALLOY powders

Results: 1205

Mechanical Characteristics of Additively Manufactured ODS 316L and 316H Alloys with and Without Post-build Processing.

Published in:

JOM: The Journal of The Minerals, Metals & Materials Society (TMS), 2025, v. 77, n. 6, p. 4519, doi. 10.1007/s11837-025-07336-9

By:

Byun, Thak Sang;
Lin, Yan-Ru;
Collins, David A.;
Hyer, Holden C.;
Epps, Kelsey;
Krogh, Kara

Publication type:

Article

APPLYING LIU'S METHOD FOR CHARACTERIZING MELT DIMENSIONS AND FLUENCE THRESHOLD IN LPBF.

Published in:

Academic Journal of Manufacturing Engineering, 2025, v. 23, n. 1, p. 22, doi. 10.5281/zenodo.15181199

By:

VASILESKA, Ema;
PANDILOV, Zoran;
TOMOV, Mite;
GECEVSKA, Valentina

Publication type:

Article

INVESTIGATION OF INDUCTION SINTERABILITY OF POWDER METAL PARTS OF DIFFERENT SHAPES AND SIZES.

Published in:

Engineer & the Machinery Magazine / Mühendis ve Makina, 2025, v. 66, n. 718, p. 23, doi. 10.46399/muhendismakina.1460609

By:

ÇİVİ, Can;
ATİK, Enver

Publication type:

Article

FEATURES OF HEATING AND MELTING OF POWDER TAPE FOR SURFACING OF COMPOSITE AND COMPLEX-ALLOYED ALLOYS.

Published in:

Eastern-European Journal of Enterprise Technologies, 2025, v. 2, n. 1(134), p. 60, doi. 10.15587/1729-4061.2025.327904

By:

Kassov, Valeriy;
Berezshna, Olena;
Yermakova, Svitlana;
Turchanin, Dmytro;
Malyhina, Svetlana

Publication type:

Article

Fe-Si-Cr Alloy–Ni-Cu-Zn Ferrite Composite Multilayer Inductors: Fabrication, Co-firing, and Magnetic Performance.

Published in:

Journal of Electronic Materials, 2025, v. 54, n. 6, p. 4648, doi. 10.1007/s11664-025-11856-0

By:

Hsiang, Hsing-I;
Hsu, Yu-Chun;
Lee, Wen-Hsi;
Priese, Christoph;
Töpfer, Jörg

Publication type:

Article

激光粉末床熔融对 NiTi/Zr复合材料显微组织及性能的调控机制.

Published in:

Machine Tool & Hydraulics, 2025, v. 53, n. 4, p. 191, doi. 10.3969/j.issn.1001-3881.2025.04.028

By:

李晟;
唐柳琳;
闰星辰;
邓朝阳;
褚清坤;
黄正华;
郑李娟

Publication type:

Article

Microstructure and corrosion performance of Al0.5FeCoNiCrMn coating prepared by plasma spraying mechanically alloyed powders.

Published in:

Surface Engineering, 2022, v. 38, n. 4, p. 383, doi. 10.1080/02670844.2022.2082156

By:

Mao, XingYe;
Wang, YuXin;
Jiang, Jie;
Chi, YunLong;
Dong, Yanchun;
Yang, Yong;
He, JiNing

Publication type:

Article

Laser surface alloying with carbon on 15-5PH steel for improved wear resistance.

Published in:

Surface Engineering, 2021, v. 37, n. 5, p. 669, doi. 10.1080/02670844.2020.1840758

By:

Zhang, Bo;
Wang, Huaming;
Chen, Rui;
He, Bei;
Cao, Yinggang;
Liu, Dong

Publication type:

Article

Laser‐Induced Ignition and Combustion of Al−Mg Alloy Powder Prepared by Melt Atomization.

Published in:

Propellants, Explosives, Pyrotechnics, 2020, v. 45, n. 10, p. 1645, doi. 10.1002/prep.202000058

By:

Huang, Xuefeng;
Yang, Yihang;
Hou, Fengting;
Li, Shengji;
Qin, Zhao;
Zhao, Fengqi

Publication type:

Article

The Oxidation and Combustion Properties of Gas Atomized Aluminum−Boron−Europium Alloy Powders.

Published in:

Propellants, Explosives, Pyrotechnics, 2019, v. 44, n. 6, p. 725, doi. 10.1002/prep.201800223

By:

Wang, Wei;
Zou, Hui;
Cai, Shuizhou

Publication type:

Article

Soft magnetic properties of nano-SiO2 coated FeNi alloy powder at high frequencies.

Published in:

Journal of Materials Science: Materials in Electronics, 2022, v. 33, n. 33, p. 25383, doi. 10.1007/s10854-022-09244-z

By:

Zhang, Cong;
Liu, Xiansong;
Kan, Xucai;
Feng, Shuangjiu;
Zhu, Yong;
Yang, Yujie;
Zhang, Zongyang

Publication type:

Article

Effects of tin particles addition on structural and mechanical properties of eutectic Sn–58Bi solder joint.

Published in:

Journal of Materials Science: Materials in Electronics, 2022, v. 33, n. 28, p. 22499, doi. 10.1007/s10854-022-09028-5

By:

Bashir, M. Nasir;
Saad, Hafiz Muhammad;
Rizwan, Muhammad;
Quazi, M. M.;
Ali, Muhammad Mahmood;
Ahmed, Arslan;
Zaidi, Asad A.;
Soudagar, Manzoore Elahi M.;
Haseeb, A. S. M. A.;
Naher, Sumsun

Publication type:

Article

Microstructural, thermal, and radiation shielding properties of Al50B25Mg25 alloy prepared by mechanical alloying.

Published in:

Journal of Materials Science: Materials in Electronics, 2022, v. 33, n. 5, p. 2350, doi. 10.1007/s10854-021-07434-9

By:

Yaykaşlı, Hakan;
Eskalen, Hasan;
Kavun, Yusuf;
Gögebakan, Musa

Publication type:

Article

Investigation of mechanical, photon buildup factors, and neutron-sensing properties of B2O3–Al2O3–Li2O–CuO glasses.

Published in:

Journal of Materials Science: Materials in Electronics, 2021, v. 32, n. 19, p. 24401, doi. 10.1007/s10854-021-06916-0

By:

Rammah, Y. S.;
El-Agawany, F. I.;
Hessien, M. M.;
Olarinoye, I. O.;
Abdelghany, A. M.;
Shams, M. S.

Publication type:

Article

Influence of mechanical alloying on structural, thermal, and magnetic properties of Fe50Ni10Co10Ti10B20 high entropy soft magnetic alloy.

Published in:

Journal of Materials Science: Materials in Electronics, 2021, v. 32, n. 16, p. 21124, doi. 10.1007/s10854-021-06612-z

By:

Panigrahi, Mrutyunjay;
Avar, Baris

Publication type:

Article

Magnetic properties of FeSiCr alloy powder coils made by gel casting process.

Published in:

Journal of Materials Science: Materials in Electronics, 2021, v. 32, n. 11, p. 14584, doi. 10.1007/s10854-021-06017-y

By:

Hsiang, Hsing-I;
Chen, Chi-He;
Chen, Chih-Cheng

Publication type:

Article

Titanate coupling agent surface modification effect on the magnetic properties of iron-based alloy powder coil prepared using screen printing.

Published in:

Journal of Materials Science: Materials in Electronics, 2021, v. 32, n. 2, p. 1800, doi. 10.1007/s10854-020-04948-6

By:

Hsiang, Hsing-I;
Chuang, Kai-Hsin;
Lee, Wen-Hsi

Publication type:

Article

Progress in materials and processes of multilayer power inductors.

Published in:

Journal of Materials Science: Materials in Electronics, 2020, v. 31, n. 19, p. 16089, doi. 10.1007/s10854-020-04188-8

By:

Hsiang, Hsing-I.

Publication type:

Article

Rapid breakdown anodization to obtain nanostructured TiO powders for photocatalytic hydrogen generation.

Published in:

Journal of Materials Science: Materials in Electronics, 2017, v. 28, n. 13, p. 9859, doi. 10.1007/s10854-017-6740-x

By:

Guerrero-Araque, Diana;
Ramírez-Ortega, David;
Gómez, Ricardo;
Acevedo-Peña, Próspero

Publication type:

Article

Electromagnetic wave absorption properties for FeCoNiCr alloy powders with magnetic field heat treatment.

Published in:

Journal of Materials Science: Materials in Electronics, 2017, v. 28, n. 13, p. 9867, doi. 10.1007/s10854-017-6741-9

By:

Yang, Peipei;
Liu, Ying;
Zhao, Xiuchen;
Zhang, Cong

Publication type:

Article

Structure-magnetic properties correlation in mechanically alloyed nanocrystalline Fe-Co-Ni-(Mg-Si) alloy powders.

Published in:

Journal of Materials Science: Materials in Electronics, 2016, v. 27, n. 10, p. 10136, doi. 10.1007/s10854-016-5090-4

By:

Prasad, Nisheeth;
Kumar, Vinod

Publication type:

Article

Oxidation of Ag-Sn-Sb alloy powders.

Published in:

Materials & Corrosion / Werkstoffe und Korrosion, 2014, v. 65, n. 5, p. 522, doi. 10.1002/maco.201206542

By:

Wu, C. P.;
Yi, D. Q.;
Goto, S.;
Xu, C. H.;
Weng, W.;
Zhou, J. M.;
Xu, G. F.

Publication type:

Article

Optimization of thermal conduction welding parameters in LPBFM for enhanced adhesion control.

Published in:

International Journal of Advanced Manufacturing Technology, 2025, v. 138, n. 1, p. 113, doi. 10.1007/s00170-024-14507-6

By:

Simon, Joshua;
Redlich, Tobias;
Wulfsberg, Jens-Peter

Publication type:

Article

Experimental investigation and optimization of the effects of manufacturing parameters on geometric tolerances in additive manufacturing of AlSi10Mg alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 134, n. 1/2, p. 415, doi. 10.1007/s00170-024-14128-z

By:

Siyambaş, Yusuf;
Turgut, Yakup

Publication type:

Article

Sustainable production of powder feedstock from machining waste using modulation-assisted drilling.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 11/12, p. 5643, doi. 10.1007/s00170-024-14089-3

By:

Singh, Malkeet;
Dhiman, Sahil;
Singh, Harpreet;
Rashid, Rizwan Abdul Rahman;
Palanisamy, Suresh

Publication type:

Article

Ti-6Al-4V alloy printing — correlations between experimental and numerical modelling melt pool data.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 7/8, p. 3603, doi. 10.1007/s00170-024-13979-w

By:

Bagasol, Axieh Joy I.;
Parivendhan, Gowthaman;
Ivankovic, Alojz;
Dowling, Denis P.

Publication type:

Article

Effect of laser alloying with CoNiCrW powder on the properties of the AlSi7Mg surface layer.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 133, n. 1/2, p. 479, doi. 10.1007/s00170-024-13769-4

By:

Soboleva, Natalia N.;
Davydova, Natalia A.;
Makarov, Aleksey V.;
Rogovaya, Svetlana A.

Publication type:

Article

Modeling of temperature distribution and clad geometry of the molten pool during laser cladding of CoCrCuFeNi alloys.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 7/8, p. 3683, doi. 10.1007/s00170-024-13602-y

By:

Tian, Dachuan;
Li, Chonggui;
Hu, Zhiguo;
Li, Xintong;
Guo, Yajun;
Feng, Xiaosong;
Xu, Zhenhai;
Sun, Xiaoguang;
Li, Wenge

Publication type:

Article

Analysis of the thermal expansion and mechanical properties of laser cladding of Invar alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 132, n. 1/2, p. 245, doi. 10.1007/s00170-024-13386-1

By:

Zhu, Shichao;
Niu, Baolin;
Chang, Zhen;
Long, Bing;
Yin, Feihong;
Ouyang, Linhan;
Xie, Lingling;
Jiang, Zhengyi

Publication type:

Article

Effect of milling time on structural, physical and photocatalytical properties of Ti-Ni alloy for biomedical applications.

Published in:

International Journal of Advanced Manufacturing Technology, 2024, v. 131, n. 7/8, p. 3539, doi. 10.1007/s00170-024-13207-5

By:

Bouchareb, Nabila;
Fellah, Mamoun;
Hezil, Naouel;
Hamadi, Fouzia;
Montagne, Alex;
Aleksei, Obrosov;
Yadav, Krishna Kumar;
El-Hiti, Gamal A.

Publication type:

Article

Spiral growth selective laser melting of axisymmetric objects from Cu-Ni–Sn alloy powder: a mass rate efficiency and physical properties study.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1055, doi. 10.1007/s00170-023-11150-5

By:

Ramos-Grez, Jorge Andrés;
Vera-Hoffmann, Javier;
Walczak, Magdalena

Publication type:

Article

Development of low content Ti-x%wt. Mg alloys by mechanical milling plus hot isostatic pressing.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 126, n. 3/4, p. 1733, doi. 10.1007/s00170-023-11126-5

By:

Carvajal, Alex Humberto Restrepo;
Ríos, Jesús María;
Zuleta, Alejandro Alberto;
Bolívar, Francisco Javier;
Castaño, Juan Guillermo;
Correa, Esteban;
Echeverria, Félix;
Lambrecht, Mickaël;
Lasanta, María Isabel;
Trujillo, Francisco Javier Pérez

Publication type:

Article

Recycled powder age estimation based on morphology evolution for the LPBF-M process.

Published in:

International Journal of Advanced Manufacturing Technology, 2023, v. 124, n. 1/2, p. 383, doi. 10.1007/s00170-022-10429-3

By:

Ruiz-Huerta, Leopoldo;
Moock, Verena M.;
Ulloa-Castillo, Nicolás A.;
Segura-Cárdenas, Emmanuel;
Borbolla-Vázquez, Alan;
Elías-Zúñiga, Alex;
Caballero-Ruiz, Alberto

Publication type:

Article

Finite element analysis of rotating compression forming of powder materials.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 3/4, p. 793, doi. 10.1007/s00170-022-10218-y

By:

Hwang, Yeong-Maw;
Yin, Sheng-Kai;
Yu, Hao-Cheng;
Tsai, Yun-Hao

Publication type:

Article

Experimental investigation and parametric optimization of friction stir powder additive manufacturing process for aerospace-grade Al alloy.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 123, n. 1/2, p. 603, doi. 10.1007/s00170-022-10211-5

By:

Chaudhary, Bhavesh;
Jain, Neelesh Kumar;
Murugesan, Jayaprakash

Publication type:

Article

NURBS function closed-loop mapping trajectory planning of serial robotic plasma cladding for complex surface coatings.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 11/12, p. 8285, doi. 10.1007/s00170-022-09709-9

By:

Wang, Zhaoqin;
Shi, Yu;
Wang, Xiaorong

Publication type:

Article

Microstructural characterization and tensile behavior of reaction synthesis aluminum 6061 metal matrix composites produced via laser beam powder bed fusion and electron beam freeform fabrication.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 3/4, p. 2197, doi. 10.1007/s00170-022-09443-2

By:

Sullivan, Ethan;
Polizzi, Adam;
Iten, Jeremy;
Nuechterlein, Jacob;
Domack, Marcia;
Liu, Stephen

Publication type:

Article

A comprehensive investigation of abrasive barrel finishing on hardness and manufacturability of laser-based powder bed fusion hollow components.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 5/6, p. 3471, doi. 10.1007/s00170-022-08903-z

By:

Khorasani, Mahyar;
Ghasemi, Amir Hossein;
Farabi, Ehsan;
Leary, Martin;
Gibson, Ian;
Rolfe, Bernard

Publication type:

Article

Fabrication of multi-functional Ni–Ti alloys by laser powder bed fusion.

Published in:

International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 1/2, p. 357, doi. 10.1007/s00170-021-08039-6

By:

Lv, Jianran;
Shen, Hongyao;
Fu, Jianzhong

Publication type:

Article

Microstructure and properties of WC/diamond/Co-based gradient composite coatings on high-speed steel fabricated by laser cladding.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 117, n. 9/10, p. 3137, doi. 10.1007/s00170-021-07904-8

By:

Liu, Donggang;
Liang, Guoxing;
Hao, Xinhui;
Huang, Yonggui;
Li, Guang;
Lv, Zheng;
Lv, Ming;
Al-Nehari, Mohammed;
Tochukwu, Ojiako Princewill

Publication type:

Article

Influence of powder type and binder saturation on binder jet 3D–printed and sintered Inconel 625 samples.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 11/12, p. 3827, doi. 10.1007/s00170-021-07496-3

By:

Jiang, Runbo;
Monteil, Lorenzo;
Kimes, Katerina;
Mostafaei, Amir;
Chmielus, Markus

Publication type:

Article

Co–Cr–Mo alloy fabricated by laser powder bed fusion process: grain structure, defect formation, and mechanical properties.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 7/8, p. 2387, doi. 10.1007/s00170-021-07570-w

By:

da Silva Costa, Alex Matos;
Oliveira, João Pedro;
Munhoz, André Luiz Jardini;
Leite, Eduardo Guimarães Barbosa;
de Freitas, Denise Souza;
de Jesus Monteiro, Maurício;
Rodriguez, Johnnatan

Publication type:

Article

An investigation into melting modes in selective laser melting of Inconel 625 powder: single track geometry and porosity.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3255, doi. 10.1007/s00170-021-07105-3

By:

Shrestha, Subin;
Chou, Kevin

Publication type:

Article

Experimental study on microstructural evolution, mechanical property, and corrosion behaviour of laser additive manufactured (LAM) titanium alloy grade 5.

Published in:

International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 3/4, p. 655, doi. 10.1007/s00170-021-06872-3

By:

Fatoba, Olawale Samuel;
Jen, Tien-Chien;
Akinlabi, Esther Titilayo

Publication type:

Article

Synthesis of Ni-Cr-B-Si-Fe-based interlayer alloy for transient liquid phase bonding of Inconel 718 superalloy by mechanical alloying process.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2857, doi. 10.1007/s00170-020-06251-4

By:

Tarai, U. K.;
Robi, P. S.;
Pal, Sukhomay

Publication type:

Article

Structural analysis and densification study of the mechanically alloyed Cr50Ni50 powders.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 108, n. 7/8, p. 2515, doi. 10.1007/s00170-020-05504-6

By:

Dekhil, L.;
Hanneche, N.;
Fellah, M.;
Bououdina, M.;
Mercier, A. M.

Publication type:

Article

Laser direct metal deposition of variable width thin-walled structures in Inconel 718 alloy by coaxial powder feeding.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 108, n. 3, p. 821, doi. 10.1007/s00170-020-05434-3

By:

Zhang, Haiquan;
Zhu, Lida;
Xue, Pengsheng

Publication type:

Article

Powder interlayer bonding of geometrically complex Ti-6Al-4V parts.

Published in:

International Journal of Advanced Manufacturing Technology, 2020, v. 106, n. 9/10, p. 3629, doi. 10.1007/s00170-019-04685-z

By:

Watkins, I. T.;
Davies, H. M.;
Stanners, O. G.;
Marchisio, S.

Publication type:

Article

Laser pulse alloying the surface of Ti-5.5Al-2Zr-1Mo-1V by boron carbide particles.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 105, n. 1-4, p. 719, doi. 10.1007/s00170-019-04200-4

By:

Gorunov, A. I.

Publication type:

Article

Development of textile-based triboelectric nanogenerators integrated with plastic metal electrodes for wearable devices.

Published in:

International Journal of Advanced Manufacturing Technology, 2019, v. 104, n. 5-8, p. 2633, doi. 10.1007/s00170-019-04160-9

By:

Chang, Chih-Chieh;
Shih, Jian-Fu;
Chiou, Yuang-Cherng;
Lee, Rong-Tsong;
Tseng, Shih-Feng;
Yang, Chii-Rong

Publication type:

Article