Works matching DE "ADHESIVE joints"
Results: 1005
Random field-based simulational identification of potential levels of material imperfections of adhesive-bonded joints.
- Published in:
- Bulletin of the Polish Academy of Sciences: Technical Sciences, 2025, v. 73, n. 1, p. 1, doi. 10.24425/bpasts.2024.151678
- By:
- Publication type:
- Article
A review of structural health monitoring of bonded structures using electromechanical impedance spectroscopy.
- Published in:
- Structural Health Monitoring, 2022, v. 21, n. 2, p. 228, doi. 10.1177/1475921721993419
- By:
- Publication type:
- Article
Detection and sizing of disbond in multilayer bonded structure using modally selective guided wave.
- Published in:
- Structural Health Monitoring, 2021, v. 20, n. 3, p. 904, doi. 10.1177/1475921719866274
- By:
- Publication type:
- Article
In situ spatial strain monitoring of a single-lap joint using inkjet-printed carbon nanotube embedded thin films.
- Published in:
- Structural Health Monitoring, 2019, v. 18, n. 5/6, p. 1479, doi. 10.1177/1475921718805963
- By:
- Publication type:
- Article
Real-time damage monitoring in trailing edge bondlines of wind turbine blades with triboluminescent sensors.
- Published in:
- Structural Health Monitoring, 2019, v. 18, n. 4, p. 1129, doi. 10.1177/1475921718788861
- By:
- Publication type:
- Article
Detection and localization of impact damages in carbon nanotube–modified epoxy adhesive films with printed circuits.
- Published in:
- Structural Health Monitoring, 2018, v. 17, n. 5, p. 1166, doi. 10.1177/1475921717738140
- By:
- Publication type:
- Article
Integrity monitoring of adhesively bonded joints via an electromechanical impedance-based approach.
- Published in:
- Structural Health Monitoring, 2018, v. 17, n. 5, p. 1031, doi. 10.1177/1475921717732331
- By:
- Publication type:
- Article
Ultimate Strength of Reinforced Concrete Beams Retrofitted with Hybrid Bonded Fiber-Reinforced Polymer.
- Published in:
- ACI Structural Journal, 2010, v. 107, n. 4, p. 451, doi. 10.14359/51663818
- By:
- Publication type:
- Article
Effect of TiN-deposition on adhesion characteristics of aluminium.
- Published in:
- Surface Engineering, 2019, v. 35, n. 6, p. 476, doi. 10.1080/02670844.2017.1391938
- By:
- Publication type:
- Article
Mode I Fracture Toughness Evaluation of Adhesively Bonded Joints via J‐Integral and DIC.
- Published in:
- Macromolecular Symposia, 2020, v. 389, n. 1, p. 1, doi. 10.1002/masy.201900116
- By:
- Publication type:
- Article
Finite Element Analysis of Stress Wave Propagation in Adhesive Joints under Low Speed Impact Tensile Loadings.
- Published in:
- Macromolecular Theory & Simulations, 2021, v. 30, n. 1, p. 1, doi. 10.1002/mats.202000066
- By:
- Publication type:
- Article
Electrothermomechanical analysis and its application to studying electrically conductive adhesive joints.
- Published in:
- Journal of Thermal Analysis & Calorimetry, 2003, v. 74, n. 1, p. 3, doi. 10.1023/A:1026356031485
- By:
- Publication type:
- Article
Adhesive bonding of glass-fibre thermoplastic composite: process optimisation and sustainability analysis using LCA methodology.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 11/12, p. 5709, doi. 10.1007/s00170-024-13022-y
- By:
- Publication type:
- Article
Sustainable design and life cycle engineering of adhesive joints for polymeric products: assessment of surface activation technologies.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2024, v. 130, n. 3/4, p. 1279, doi. 10.1007/s00170-023-12717-y
- By:
- Publication type:
- Article
Influence of the mechanism of gluing processes on the strength of clinch-adhesive hybrid joining process of steel/aluminum plates.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 7/8, p. 3325, doi. 10.1007/s00170-023-11464-4
- By:
- Publication type:
- Article
The effect of RFSSW parameters on load capacity of EN AW-6082-T6 aluminum alloy and AlCu bimetallic joints.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 3/4, p. 1703, doi. 10.1007/s00170-023-11598-5
- By:
- Publication type:
- Article
Adhesion of batch hot-dip galvanized components.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 11/12, p. 5197, doi. 10.1007/s00170-023-11045-5
- By:
- Publication type:
- Article
The small-size laser shock adhesive-clinching of Al foils.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 9/10, p. 3837, doi. 10.1007/s00170-022-10123-4
- By:
- Publication type:
- Article
Influence of raw material surface roughening on the lap shearing strength and failure behavior of adhesively bonded aluminum joints.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 122, n. 1, p. 327, doi. 10.1007/s00170-022-09590-6
- By:
- Publication type:
- Article
Effect of curing post-treatment time on mechanical properties and stress distribution of adhesively bonded dissimilar steel-aluminum joints.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 121, n. 7/8, p. 4929, doi. 10.1007/s00170-022-09585-3
- By:
- Publication type:
- Article
Load capacity of single-lap adhesive joints made of 2024-T3 aluminium alloy sheets after shot peening.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 5/6, p. 3013, doi. 10.1007/s00170-021-08587-x
- By:
- Publication type:
- Article
A novel approach to modelling the bond characteristics between CFRP fabrics and steel plate joints under quasi-static tensile loads.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 116, n. 9/10, p. 3247, doi. 10.1007/s00170-021-07714-y
- By:
- Publication type:
- Article
Parametric study of composite curved adhesive joints.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2020, v. 111, n. 9/10, p. 2957, doi. 10.1007/s00170-020-06314-6
- By:
- Publication type:
- Article
Electromagnetic heating for adhesive melting in CFRTP joining: study, analysis, and testing.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2020, v. 106, n. 11/12, p. 5317, doi. 10.1007/s00170-019-04910-9
- By:
- Publication type:
- Article
Effects of loading rates on mechanical property and failure behavior of single-lap adhesive joints with carbon fiber reinforced plastics and aluminum alloys.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2020, v. 106, n. 5/6, p. 2569, doi. 10.1007/s00170-019-04804-w
- By:
- Publication type:
- Article
Effect of adherends misalignment on the strength of single-lap bonded joints.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2020, v. 106, n. 3/4, p. 817, doi. 10.1007/s00170-019-04652-8
- By:
- Publication type:
- Article
Influence of Alloying Elements on Heat Resistance of Ni-Based Fillers and Brazed Joints.
- Published in:
- Materials Science, 2023, v. 58, n. 5, p. 643, doi. 10.1007/s11003-023-00711-4
- By:
- Publication type:
- Article
On the Possibility of Monitoring of Adhesive Joints of Bodies by Sounding with Plane Transverse Electric Waves.
- Published in:
- Materials Science, 2005, v. 41, n. 1, p. 100, doi. 10.1007/s11003-005-0137-3
- By:
- Publication type:
- Article
Fatigue Reliability Modelling and Assessment of Carbon Fiber Reinforced Polymer/Epoxy Resin Bonded Structure Incorporating Multiple Environmental Stresses and Size Effects.
- Published in:
- Modelling, 2024, v. 5, n. 3, p. 1116, doi. 10.3390/modelling5030058
- By:
- Publication type:
- Article
Numerical Evaluation of Hydroformed Tubular Adhesive Joints under Tensile Loads.
- Published in:
- Modelling, 2024, v. 5, n. 3, p. 990, doi. 10.3390/modelling5030052
- By:
- Publication type:
- Article
Tensile Strength of Adhesively Bonded and Hybrid (Bonded/Riveted) Dissimilar Single-Lap Joints.
- Published in:
- International Journal of Automotive Science & Technology, 2022, v. 6, n. 4, p. 398, doi. 10.30939/ijastech..1193217
- By:
- Publication type:
- Article
A New Concept of Sustainable Wind Turbine Blades: Bio-Inspired Design with Engineered Adhesives.
- Published in:
- Biomimetics (2313-7673), 2023, v. 8, n. 6, p. 448, doi. 10.3390/biomimetics8060448
- By:
- Publication type:
- Article
Long-Term Outcomes of Ultrasound-Guided Hydrodistension for Adhesive Capsulitis: A Prospective Observational Study.
- Published in:
- Tomography: A Journal for Imaging Research, 2023, v. 9, n. 5, p. 1857, doi. 10.3390/tomography9050147
- By:
- Publication type:
- Article
Results of experimental studies on the strength of adhesive-bonded joints of thermally modified ash wood.
- Published in:
- Scientific Journal Ukrainian Journal of Forest & Wood Science, 2023, v. 14, n. 1, p. 27, doi. 10.31548/forest/1.2023.27
- By:
- Publication type:
- Article
Developing a Speckle Pattern to Evaluate Adhesive Joints Using Digital Image Correlation.
- Published in:
- Research in Nondestructive Evaluation, 2020, v. 31, n. 2, p. 116, doi. 10.1080/09349847.2019.1645253
- By:
- Publication type:
- Article
Ultrasonic Analysis of the Degree of Cure and Cohesive Properties of the Adhesive in a Bond Joint.
- Published in:
- Research in Nondestructive Evaluation, 2007, v. 18, n. 2, p. 121, doi. 10.1080/09349840601128747
- By:
- Publication type:
- Article
Analysis of production parameters of single-lap bonds adhesive bonded with composites based on aluminium filler.
- Published in:
- Research in Agricultural Engineering, 2017, v. 63, n. 1, p. 36, doi. 10.17221/82/2015-RAE
- By:
- Publication type:
- Article
Mechanical Properties and Damage Behaviours of Polyurethane Composites Reinforced With BNNP and MWCNT Hybrid Nanoparticles.
- Published in:
- Journal of Elastomers & Plastics, 2023, v. 55, n. 4, p. 613, doi. 10.1177/00952443231165427
- By:
- Publication type:
- Article
Investigating the Effect of Process Parameters on Reducing the Peeling Stress in Adhesive Joints of Composite Materials.
- Published in:
- International Journal of Advanced Design & Manufacturing Technology, 2023, v. 16, n. 2, p. 77, doi. 10.30486/ADMT.2023.1971084.1387
- By:
- Publication type:
- Article
Non-linear Analysis of Adhesive Joints in Composite Structures.
- Published in:
- International Journal of Advanced Design & Manufacturing Technology, 2016, v. 9, n. 1, p. 101
- By:
- Publication type:
- Article
An approach to adhesive bond characterisation using guided acoustic waves in multi-layered plates.
- Published in:
- Automatisierungstechnik, 2021, v. 69, n. 11, p. 962, doi. 10.1515/auto-2021-0089
- By:
- Publication type:
- Article
Tensile-shear properties of steel-Al adhesively bonded dissimilar joints and the effect of Al plate thickness.
- Published in:
- Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-47072-1
- By:
- Publication type:
- Article
Achieving outstanding mechanical/bonding performances by epoxy nanocomposite as concrete–steel rebar adhesive using silane modification of nano SiO<sub>2</sub>.
- Published in:
- Scientific Reports, 2023, v. 13, n. 1, p. 1, doi. 10.1038/s41598-023-36462-0
- By:
- Publication type:
- Article
Shear and Fracture Characteristics of Nano-silica and GNP Hybrid Nanoparticle Reinforced Single Lap Joints.
- Published in:
- Journal of the Institute of Science & Technology / Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2023, v. 13, n. 3, p. 1970, doi. 10.21597/jist.1212972
- By:
- Publication type:
- Article
Thoughts on the Importance of Similitude and Multi-Axial Loads When Assessing the Durability and Damage Tolerance of Adhesively-Bonded Doublers and Repairs.
- Published in:
- Aerospace (MDPI Publishing), 2023, v. 10, n. 11, p. 946, doi. 10.3390/aerospace10110946
- By:
- Publication type:
- Article
A Literature Review on Crack Arrest Features for Composite Materials and Composite Joints with a Focus on Aerospace Applications.
- Published in:
- Aerospace (MDPI Publishing), 2023, v. 10, n. 2, p. 137, doi. 10.3390/aerospace10020137
- By:
- Publication type:
- Article
Life-Cycle Analysis and Evaluation of Mechanical Properties of a Bio-Based Structural Adhesive.
- Published in:
- Aerospace (MDPI Publishing), 2022, v. 9, n. 2, p. 64, doi. 10.3390/aerospace9020064
- By:
- Publication type:
- Article
Geometric Factors Impacting Adhesive Lap Joint Strength and Design.
- Published in:
- Journal of Adhesion Science & Technology, 2012, v. 26, n. 1-3, p. 89, doi. 10.1163/016942411X569318
- By:
- Publication type:
- Article
Effect of Adhesive Thickness on Transverse Low-Speed Impact Behavior of Adhesively Bonded Similar and Dissimilar Clamped Plates.
- Published in:
- Journal of Adhesion Science & Technology, 2011, v. 25, n. 19, p. 2587, doi. 10.1163/016942411X556015
- By:
- Publication type:
- Article
Effect of Substrate Material on Fatigue Crack Propagation Rate of Adhesively Bonded DCB Joints.
- Published in:
- Journal of Adhesion Science & Technology, 2011, v. 25, n. 20, p. 2775, doi. 10.1163/016942410X537369
- By:
- Publication type:
- Article