Viscoelasticity, Lubricity, and Wear Prevention of Cross‐Linked Mucin Gels.
- Published in:
- Advanced Materials Interfaces, 2025, v. 12, n. 13, p. 1, doi. 10.1002/admi.202500174
- By:
- Publication type:
- Article
Works matching DE "ABRASION resistance"
Results: 1567
1
2
The effect of ferrochrome content in the initial charge on the structure, mechanical and tribotechnical properties of Fe–Cr–C sintered carbide steel.
- Published in:
- Materials Science, 2025, v. 60, n. 4, p. 435, doi. 10.1007/s11003-025-00903-0
- By:
- Publication type:
- Article
3
Study on the Wear Resistance of 6061 Aluminum Alloy Bipolar Plasma Electrolytic Oxidation Ceramic Coating by the Addition of K 2 ZrF 6.
- Published in:
- Materials (1996-1944), 2025, v. 18, n. 13, p. 2962, doi. 10.3390/ma18132962
- By:
- Publication type:
- Article
4
聚四氟乙烯对丁腈橡胶胶料耐磨性能的影响.
- Published in:
- China Rubber Industry, 2025, v. 72, n. 6, p. 403, doi. 10.12136/j.issn.1000-890X.2025.06.0403
- By:
- Publication type:
- Article
5
DESIGN AND DEVELOPMENT OF HANDICRAFTS BASED ON WASTE VEGETABLE-TANNED LEATHER MATERIALS.
- Published in:
- Leather & Footwear Journal / Revista de Pielarie Incaltaminte, 2025, v. 25, n. 2, p. 89, doi. 10.24264/lfj.25.2.3
- By:
- Publication type:
- Article
6
Preparation and Performance of High Bio‐Based and Abrasion‐Resistant Tread Rubber Based on Itaconate Rubber.
- Published in:
- Journal of Applied Polymer Science, 2025, v. 142, n. 23, p. 1, doi. 10.1002/app.56977
- By:
- Publication type:
- Article
7
Mechanical and Tribological Properties of ZrCuN Coatings by a Co‐Deposition Method of Arc and HiPIMS Techniques.
- Published in:
- Advanced Engineering Materials, 2025, v. 27, n. 13, p. 1, doi. 10.1002/adem.202500335
- By:
- Publication type:
- Article
8
Morphology and performance of nanosilica filler filled NR/NBR rubber composites.
- Published in:
- Journal of Rubber Research, 2025, v. 28, n. 2, p. 269, doi. 10.1007/s42464-025-00303-8
- By:
- Publication type:
- Article
9
Enhancing cure characteristics, mechanical properties and swelling resistance of chloroprene rubber/natural rubber composites with halloysite nanotubes.
- Published in:
- Journal of Rubber Research, 2025, v. 28, n. 2, p. 325, doi. 10.1007/s42464-025-00306-5
- By:
- Publication type:
- Article
10
Effektiver Schutz vor Verschleiß.
- Published in:
- Praktiker, 2025, n. 6, p. 24
- By:
- Publication type:
- Article
11
Enhancing Abrasion Resistance in Jute/Epoxy Composites: The Role of Silicon Carbide Fillers in Wear Prevention.
- Published in:
- Tribology in Industry, 2025, v. 47, n. 1, p. 1, doi. 10.24874/ti.1733.08.24.11
- By:
- Publication type:
- Article
12
Evaluating the Impact of Environmental Exposure on the Performance of Polyester Sportswear Materials.
- Published in:
- Polymers (20734360), 2025, v. 17, n. 12, p. 1616, doi. 10.3390/polym17121616
- By:
- Publication type:
- Article
13
Development of a Bio-Inspired Aerogel with Robust Sustainability and Thermal Insulation Performance.
- Published in:
- Materials (1996-1944), 2025, v. 18, n. 12, p. 2808, doi. 10.3390/ma18122808
- By:
- Publication type:
- Article
14
Performance of Quality-Controlled Recycled Concrete Aggregates.
- Published in:
- ACI Materials Journal, 2024, v. 121, n. 1, p. 17, doi. 10.14359/51740259
- By:
- Publication type:
- Article
15
Assessment of Abrasion Resistance of Fiber-Reinforced Concrete at Cold Temperatures through Acoustic Emission Analysis.
- Published in:
- ACI Materials Journal, 2023, v. 120, n. 4, p. 41, doi. 10.14359/51738806
- By:
- Publication type:
- Article
16
Abrasion Resistance of Concrete with Different Mixture Compositions at Cold Curing Temperatures.
- Published in:
- ACI Materials Journal, 2022, v. 119, n. 3, p. 235, doi. 10.14359/51734619
- By:
- Publication type:
- Article
17
Abrasion and Scaling Resistance of Lightweight Self-Consolidating Concrete Containing Expanded Slate Aggregate.
- Published in:
- ACI Materials Journal, 2021, v. 118, n. 2, p. 31, doi. 10.14359/51729325
- By:
- Publication type:
- Article
18
Abrasion Resistance of Fiber-Reinforced Concrete under Cold Temperatures.
- Published in:
- ACI Materials Journal, 2020, v. 117, n. 5, p. 221, doi. 10.14359/51725784
- By:
- Publication type:
- Article
19
A Summary of Factors Affecting Concrete Salt-Scaling Performance.
- Published in:
- ACI Materials Journal, 2020, v. 117, n. 3, p. 53, doi. 10.14359/51724614
- By:
- Publication type:
- Article
20
Review of Concrete Resistance to Abrasion by Waterborne Solids.
- Published in:
- ACI Materials Journal, 2020, v. 117, n. 3, p. 41, doi. 10.14359/51724592
- By:
- Publication type:
- Article
21
Effect of Recycled Aggregate Characteristics on Drying Shrinkage of Paving Concrete.
- Published in:
- ACI Materials Journal, 2020, v. 117, n. 2, p. 87, doi. 10.14359/51720296
- By:
- Publication type:
- Article
22
Effects of Mixture Proportioning, Curing, and Finishing on Concrete Surface Hardness.
- Published in:
- ACI Materials Journal, 2019, v. 116, n. 2, p. 119, doi. 10.14359/51714457
- By:
- Publication type:
- Article
23
Abrasion Resistance of Self-Consolidating Engineered Cementitious Composites Developed with Different Mixture Compositions.
- Published in:
- ACI Materials Journal, 2019, v. 116, n. 1, p. 27, doi. 10.14359/51712239
- By:
- Publication type:
- Article
24
Can Concrete Containing High-Volume Recycled Concrete Aggregate Be Durable?
- Published in:
- ACI Materials Journal, 2018, v. 115, n. 3, p. 471, doi. 10.14359/51702190
- By:
- Publication type:
- Article
25
Investigating Abrasion Resistance of Interlocking Blocks Incorporating Steel Slag Aggregate.
- Published in:
- ACI Materials Journal, 2018, v. 115, n. 1, p. 47, doi. 10.14359/51700898
- By:
- Publication type:
- Article
26
Concrete with Used Tire Rubber Aggregates: Mechanical Performance.
- Published in:
- ACI Materials Journal, 2012, v. 109, n. 3, p. 283, doi. 10.14359/51683818
- By:
- Publication type:
- Article
27
Abrasion Resistance of Concrete in Hydraulic Structures.
- Published in:
- ACI Materials Journal, 2009, v. 106, n. 4, p. 349, doi. 10.14359/56655
- By:
- Publication type:
- Article
28
Physical and chemical characterization of seaweed fabric for apparel industry.
- Published in:
- Man-Made Textiles in India, 2020, v. 48, n. 11, p. 382
- By:
- Publication type:
- Article
29
Study and characterization of auto rickshaw fabrics.
- Published in:
- Man-Made Textiles in India, 2020, v. 48, n. 7, p. 231
- By:
- Publication type:
- Article
30
A comprehensive view on assessment of scoured cotton using enzymes and alkali -- Part II: Chemical Methods.
- Published in:
- Man-Made Textiles in India, 2019, v. 47, n. 3, p. 93
- By:
- Publication type:
- Article
31
Comfort characteristics of cotton hollow yarn knitted fabrics: Part 4 -- Mechanical properties.
- Published in:
- Man-Made Textiles in India, 2019, v. 47, n. 1, p. 18
- By:
- Publication type:
- Article
32
Performance study of E-glass reinforced HPPE and cotton cut resistant gloves with repeated laundering and industrial use.
- Published in:
- Man-Made Textiles in India, 2018, v. 46, n. 9, p. 303
- By:
- Publication type:
- Article
33
Impact of Washing Silk on its Physical Properties.
- Published in:
- Man-Made Textiles in India, 2014, v. 42, n. 8, p. 292
- By:
- Publication type:
- Article
34
Evaluation of Physical & Comfort properties of Eri & Wool spun yarn woven fabrics.
- Published in:
- Man-Made Textiles in India, 2009, v. 52, n. 11, p. 393
- By:
- Publication type:
- Article
35
Densification of timber: a review on the process, material properties, and application.
- Published in:
- Journal of Wood Science, 2022, v. 68, n. 1, p. 1, doi. 10.1186/s10086-022-02028-3
- By:
- Publication type:
- Article
36
Abrasion Resistance and Mechanical Properties of Waste-Glass-Fiber-Reinforced Roller-compacted Concrete.
- Published in:
- Mechanics of Composite Materials, 2018, v. 54, n. 2, p. 251, doi. 10.1007/s11029-018-9736-6
- By:
- Publication type:
- Article
37
Stress and Damage Mitigation from Oriented Nanostructures within the Radular Teeth of Cryptochiton stelleri.
- Published in:
- Advanced Functional Materials, 2014, v. 24, n. 39, p. 6093, doi. 10.1002/adfm.201401091
- By:
- Publication type:
- Article
38
Hap-based porous material with potential application as bio-packages for MEMS.
- Published in:
- Journal of Materials Science: Materials in Electronics, 2008, v. 19, n. 7, p. 646, doi. 10.1007/s10854-007-9413-3
- By:
- Publication type:
- Article
39
Tailoring multipurpose capabilities of jute (Corchorus) with a focus on the cleaner production and "zero waste" concept.
- Published in:
- Cellulose, 2025, v. 32, n. 7, p. 4595, doi. 10.1007/s10570-025-06507-w
- By:
- Publication type:
- Article
40
Utilization of poplar fibers in needle punched nonwovens.
- Published in:
- Cellulose, 2024, v. 31, n. 13, p. 8351, doi. 10.1007/s10570-024-06062-w
- By:
- Publication type:
- Article
41
Improvement of decorative texture effects, thermal stability, and mechanical properties of Pinus massoniana using a combined dyeing and superhydrophobic modification method.
- Published in:
- Cellulose, 2023, v. 30, n. 15, p. 9861, doi. 10.1007/s10570-023-05482-4
- By:
- Publication type:
- Article
42
Screen-printing of microfibrillated cellulose for an improved moisture management, strength and abrasion resistant properties of flame-resistant fabrics.
- Published in:
- Cellulose, 2021, v. 28, n. 10, p. 6663, doi. 10.1007/s10570-021-03915-6
- By:
- Publication type:
- Article
43
Multi-functional cotton textiles design using in situ generating zeolitic imidazolate framework-67 (ZIF-67) for effective UV resistance, antibacterial activity, and self-cleaning.
- Published in:
- Cellulose, 2021, v. 28, n. 9, p. 5923, doi. 10.1007/s10570-021-03840-8
- By:
- Publication type:
- Article
44
Fabrication and characterization of nanodiamond coated cotton fabric for improved functionality.
- Published in:
- Cellulose, 2019, v. 26, n. 9, p. 5797, doi. 10.1007/s10570-019-02479-w
- By:
- Publication type:
- Article
45
Effect of softener in home laundering of cotton fabric: a study of low-stress mechanical properties.
- Published in:
- Cellulose, 2018, v. 25, n. 10, p. 6161, doi. 10.1007/s10570-018-1956-3
- By:
- Publication type:
- Article
46
Real-Time Ultrasonic Monitoring of the Vulcanization Process in Nitrile Rubbers.
- Published in:
- Russian Journal of Nondestructive Testing, 2021, v. 57, n. 12, p. 1072, doi. 10.1134/S1061830921120093
- By:
- Publication type:
- Article
47
Welcome back to fibreglass...?
- Published in:
- Noise Notes, 2002, v. 1, n. 4, p. 27, doi. 10.1260/147547302762231033
- Publication type:
- Article
48
Improvement of Workability and Integrity for Ambient Ground Rubber as Elastomer Alternative: Direct Incorporation and Functionalization.
- Published in:
- Technium, 2021, v. 3, n. 7, p. 32
- By:
- Publication type:
- Article
49
PS FILM APPLICATION ON ARTIFICIAL FABRICS.
- Published in:
- Knowledge: International Journal, 2024, v. 62, n. 3, p. 335
- By:
- Publication type:
- Article
50
The Analysis of the Cutting Forces and Surface Layer Stereometry in the Grinding Process of Abrasion--Resisting Materials.
- Published in:
- Mechanics & Mechanical Engineering, 2016, v. 20, n. 1, p. 43
- By:
- Publication type:
- Article