Works matching DE "3-D printers"
Results: 1973
Nondestructive Analysis of Fluoroquinolone Drugs by Colorimetric Method Using a Smartphone.
- Published in:
- Inorganic Materials, 2024, v. 60, n. 3, p. 270, doi. 10.1134/S0020168524700328
- By:
- Publication type:
- Article
Layer adhesion investigation of three dimension printed parts by controlling the environment temperature.
- Published in:
- Advances in Science & Technology Research Journal, 2025, v. 19, n. 3, p. 74, doi. 10.12913/22998624/197333
- By:
- Publication type:
- Article
How 3D Printers for Houses Can Reduce CO 2 Emissions.
- Published in:
- Buildings (2075-5309), 2025, v. 15, n. 4, p. 599, doi. 10.3390/buildings15040599
- By:
- Publication type:
- Article
Effect of Filament Material and Printing Temperature on 3D Printing Extrusion Force.
- Published in:
- Applied Sciences (2076-3417), 2025, v. 15, n. 4, p. 2046, doi. 10.3390/app15042046
- By:
- Publication type:
- Article
Three-Dimensionally Printed Gypsum Located Within Micro-Encapsulated Phase Change Material: Thermal Conductivity Benefits of Selective Activation Technique.
- Published in:
- Applied Sciences (2076-3417), 2025, v. 15, n. 4, p. 1929, doi. 10.3390/app15041929
- By:
- Publication type:
- Article
Lung cell toxicological effects of 3D printer aerosolized filament byproducts.
- Published in:
- Environmental Science & Pollution Research, 2025, v. 32, n. 9, p. 5078, doi. 10.1007/s11356-025-36006-1
- By:
- Publication type:
- Article
3D Imaging and Additive Manufacturing for Original Artifact Preservation Purposes: A Case Study from the Archaeological Museum of Alexandroupolis.
- Published in:
- Heritage (2571-9408), 2025, v. 8, n. 2, p. 80, doi. 10.3390/heritage8020080
- By:
- Publication type:
- Article
Modeling the Energy and Heating Efficiency of 3D Printing for Composite Materials with Dispersed Volumetric Particles.
- Published in:
- Electronics (2079-9292), 2025, v. 14, n. 4, p. 688, doi. 10.3390/electronics14040688
- By:
- Publication type:
- Article
AutoML-driven diagnostics of the feeder motor in fused filament fabrication machines from direct current signals.
- Published in:
- Journal of Intelligent Manufacturing, 2025, v. 36, n. 3, p. 1999, doi. 10.1007/s10845-024-02332-3
- By:
- Publication type:
- Article
Redesigning FDM Platforms for Bio-Printing Applications.
- Published in:
- Micromachines, 2025, v. 16, n. 2, p. 226, doi. 10.3390/mi16020226
- By:
- Publication type:
- Article
Worm Selector: Volume Selection in a 3D Point Cloud Through Adaptive Modelling.
- Published in:
- International Journal of Virtual Reality, 2017, v. 17, n. 1, p. 1, doi. 10.20870/ijvr.2017.17.1.2884
- By:
- Publication type:
- Article
World of Concrete 2022 Wrapped a Highly Productive and Well-Attended Event.
- Published in:
- Concrete International, 2022, v. 44, n. 4, p. 12
- Publication type:
- Article
Modifying the 2024 I-Codes.
- Published in:
- Concrete International, 2021, v. 43, n. 10, p. 27
- Publication type:
- Article
Odense Robotics Collaboration Project: Integrating feedback loops for autonomous robot-based 3-D concrete printing.
- Published in:
- Concrete International, 2021, v. 43, n. 9, p. 30
- By:
- Publication type:
- Article
The Show Must Go On (the Road): Custom experiential marketing environments give vendors a solid platform for customer engagement.
- Published in:
- Concrete International, 2021, v. 43, n. 7, p. 44
- Publication type:
- Article
Formwork Produced Using Additive Manufacturing: A twenty-first-century process is applied to a historic restoration project.
- Published in:
- Concrete International, 2021, v. 43, n. 6, p. 48
- Publication type:
- Article
COBOD 3-D Printer Used for First 3-D Printed Building in Germany.
- Published in:
- Concrete International, 2020, v. 42, n. 12, p. 72
- Publication type:
- Article
JUST PRINT IT!
- Published in:
- AATCC Review, 2022, v. 22, n. 6, p. 28
- By:
- Publication type:
- Article
Rodin® Sculpture 2.0: A Next-Generation Resin for 3D Printing.
- Published in:
- Compendium of Continuing Education in Dentistry (15488578), 2024, v. 45, n. 10, p. 536
- By:
- Publication type:
- Article
New 4-Shade Composite From Kulzer Easy to Shade-Match and Handle.
- Published in:
- 2024
- By:
- Publication type:
- Product Review
MAX 3D Printer, KeyPrint 3D Resins: Ideal for Digital Workflow.
- Published in:
- Compendium of Continuing Education in Dentistry (15488578), 2023, v. 44, n. 10, p. 594
- Publication type:
- Article
A Review of Intraoral Scanners: Considerations When Making Investment Decisions.
- Published in:
- Compendium of Continuing Education in Dentistry (15488578), 2021, v. 42, n. 10, p. 572
- By:
- Publication type:
- Article
Biodegradable, Solvent‐Free Photocrosslinkable PLLA Resin Formulations for Additive Manufacturing.
- Published in:
- Macromolecular Chemistry & Physics, 2022, v. 223, n. 22, p. 1, doi. 10.1002/macp.202200139
- By:
- Publication type:
- Article
Thionolactone as a Resin Additive to Prepare (Bio)degradable 3D Objects via VAT Photopolymerization**.
- Published in:
- Angewandte Chemie, 2022, v. 134, n. 18, p. 1, doi. 10.1002/ange.202117700
- By:
- Publication type:
- Article
Drawing with Iron on a Gel Containing a Supramolecular Siderophore.
- Published in:
- Angewandte Chemie, 2019, v. 131, n. 51, p. 18605, doi. 10.1002/ange.201910872
- By:
- Publication type:
- Article
Customer satisfaction-oriented product configuration approach based on online product reviews.
- Published in:
- Multimedia Tools & Applications, 2022, v. 81, n. 3, p. 4413, doi. 10.1007/s11042-021-11774-3
- By:
- Publication type:
- Article
Stereolithographic (SLA) 3D Printing of Microfluidic Flow Cells to Encapsulate EM Grids Used to Culture Cells for Correlative Imaging Studies.
- Published in:
- Microscopy & Microanalysis, 2024, v. 30, p. 1, doi. 10.1093/mam/ozae044.431
- By:
- Publication type:
- Article
Toward global availability of low-cost, patient-specific cranial implants: creation and validation of automated CranialRebuild freeware application.
- Published in:
- Acta Neurochirurgica, 2023, v. 165, n. 8, p. 2219, doi. 10.1007/s00701-023-05663-x
- By:
- Publication type:
- Article
The "springform" technique in cranioplasty: custom made 3D-printed templates for intraoperative modelling of polymethylmethacrylate cranial implants.
- Published in:
- Acta Neurochirurgica, 2022, v. 164, n. 3, p. 679, doi. 10.1007/s00701-021-05077-7
- By:
- Publication type:
- Article
Biorefining of Wood-Fibre Raw Material in a Material Composition for Additive Technologies.
- Published in:
- Fibre Chemistry, 2023, v. 55, n. 1, p. 53, doi. 10.1007/s10692-023-10426-6
- By:
- Publication type:
- Article
Global Data Meets 3-D Printing: The Quest for a Balanced and Globally Collaborative Solution to Prevent Patent Infringement in the Foreseeable 3-D Printing Revolution.
- Published in:
- Indiana Journal of Global Legal Studies, 2015, v. 22, n. 1, p. 149, doi. 10.2979/indjglolegstu.22.1.149
- By:
- Publication type:
- Article
OPTIMIZATION OF PARAMETERS OF POLYLACTIDE PROCESSING ON A 3D PRINTER.
- Published in:
- Issues of Chemistry & Chemical Technology / Voprosy Khimii & Khimicheskoi Tekhnologii, 2023, n. 5, p. 29, doi. 10.32434/0321-4095-2023-150-5-29-35
- By:
- Publication type:
- Article
Efficiency of antlion trap design and larval behavior in capture success.
- Published in:
- Behavioral Ecology, 2022, v. 33, n. 1, p. 184, doi. 10.1093/beheco/arab124
- By:
- Publication type:
- Article
A TECNOLOGIA E SEUS BENEFÍCIOS NO DESENVOLVIMENTO DOS PROCESSOS: O USO DE SOFTAWARE DE SIMULAÇÃO NUMÉRICA NO SETOR DE FUNDIÇÃO DE UMA GRANDE EMPRESA AGROINDUSTRIAL.
- Published in:
- Revista Foco (Interdisciplinary Studies Journal), 2023, v. 16, n. 2, p. 1, doi. 10.54751/revistafoco.v16n2-126
- By:
- Publication type:
- Article
ОПРЕДЕЛЕНИЕ ПРОЧНОСТНЫХ ХАРАКТЕРИСТИК ПОЛИМЕРБЕТОНА ДЛЯ АДДИТИВНЫХ ТЕХНОЛОГИЙ
- Published in:
- News of Kazakhstan Science / Novosti nauki Kazahstana, 2019, n. 1, p. 156
- By:
- Publication type:
- Article
YAPIŞKAN PÜSKÜRTME YÖNTEMİNDE ÜRETİM PARAMETRELERİNİN ÖNEMİ VE ÖRNEK BİR UYGULAMA.
- Published in:
- SDU Journal of Engineering Sciences & Design / Mühendislik Bilimleri ve Tasarım Dergisi, 2022, v. 10, n. 4, p. 1354, doi. 10.21923/jesd.1103808
- By:
- Publication type:
- Article
FDM YÖNTEMİ İLE ÜRETİLEN PLA NUMUNELERİN ÇEKME ÖZELLİKLERİNE İŞLEM PARAMETRELERİNİN ETKİSİNİN İNCELENMESİ.
- Published in:
- SDU Journal of Engineering Sciences & Design / Mühendislik Bilimleri ve Tasarım Dergisi, 2021, v. 9, n. 1, p. 209, doi. 10.21923/jesd.750264
- By:
- Publication type:
- Article
Effect of lag screw on stability of first metatarsophalangeal joint arthrodesis with medial plate.
- Published in:
- PeerJ, 2024, p. 1, doi. 10.7717/peerj.16901
- By:
- Publication type:
- Article
Effect of Printing Parameters on the Mechanical Properties of Parts Fabricated with Open-Source 3D Printers in PLA by Fused Deposition Modeling.
- Published in:
- Mechanics & Mechanical Engineering, 2018, v. 22, n. 4, p. 895
- By:
- Publication type:
- Article
Omni‐Liquid Droplet and Bubble Manipulation Platform Using Functional Organogel Blocks.
- Published in:
- Advanced Materials Interfaces, 2022, v. 9, n. 20, p. 1, doi. 10.1002/admi.202200797
- By:
- Publication type:
- Article
Self‐Sustaining 3D Thin Liquid Films in Ambient Environments.
- Published in:
- Advanced Materials Interfaces, 2020, v. 7, n. 9, p. 1, doi. 10.1002/admi.201901887
- By:
- Publication type:
- Article
La transformación digital de la aduana: un paso más hacia la facilitación del comercio .
- Published in:
- Revista del ICDT, 2021, v. 57, n. 84, p. 433
- By:
- Publication type:
- Article
Design, alpha testing, and beta testing of a 3-D printed open-hardware portable cryopreservation device for aquatic species.
- Published in:
- Journal of Applied Aquaculture, 2023, v. 35, n. 1, p. 213, doi. 10.1080/10454438.2021.1955805
- By:
- Publication type:
- Article
Deep learning and complex network theory based analysis on socialized manufacturing resources utilisations and an application case study.
- Published in:
- Concurrent Engineering: Research & Applications, 2021, v. 29, n. 3, p. 236, doi. 10.1177/1063293X211003194
- By:
- Publication type:
- Article
3-D PRINTING: Big potential, little adoption.
- Published in:
- Industrial Management, 2016, v. 58, n. 4, p. 12
- By:
- Publication type:
- Article
HUB3D: Intelligent Manufacturing HUB System.
- Published in:
- Technologies (2227-7080), 2024, v. 12, n. 7, p. 109, doi. 10.3390/technologies12070109
- By:
- Publication type:
- Article
Cost-Effective 3D Printing of Silicone Structures Using an Advanced Intra-Layer Curing Approach.
- Published in:
- Technologies (2227-7080), 2023, v. 11, n. 6, p. 179, doi. 10.3390/technologies11060179
- By:
- Publication type:
- Article
Thermoplastics and Photopolymer Desktop 3D Printing System Selection Criteria Based on Technical Specifications and Performances for Instructional Applications.
- Published in:
- Technologies (2227-7080), 2021, v. 9, n. 4, p. 91, doi. 10.3390/technologies9040091
- By:
- Publication type:
- Article
The Road to Improved Fiber-Reinforced 3D Printing Technology.
- Published in:
- Technologies (2227-7080), 2020, v. 8, n. 4, p. 51, doi. 10.3390/technologies8040051
- By:
- Publication type:
- Article
Development of a Resilient 3-D Printer for Humanitarian Crisis Response.
- Published in:
- Technologies (2227-7080), 2018, v. 6, n. 1, p. 30, doi. 10.3390/technologies6010030
- By:
- Publication type:
- Article