Found: 49
Select item for more details and to access through your institution.
Toughening mechanism of B<sub>4</sub>C/TiB<sub>2</sub> ceramic materials by in situ reaction via spark plasma sintering.
- Published in:
- International Journal of Applied Ceramic Technology, 2024, v. 21, n. 5, p. 3462, doi. 10.1111/ijac.14763
- By:
- Publication type:
- Article
Design, optimization, and verification of self‐lubricating ceramic tool microstructure by MC method.
- Published in:
- International Journal of Applied Ceramic Technology, 2024, v. 21, n. 4, p. 3048, doi. 10.1111/ijac.14735
- By:
- Publication type:
- Article
Investigation of Surface Integrity of 304 Stainless Steel in Turning Process with Nanofluid Minimum-Quantity Lubrication Using h-BN Nanoparticles.
- Published in:
- Metals (2075-4701), 2024, v. 14, n. 5, p. 583, doi. 10.3390/met14050583
- By:
- Publication type:
- Article
Effects of graphene pull‐out on the interfacial mechanical properties of alumina/graphene nanocomposite ceramic tool materials: Molecular dynamics analysis and material preparation.
- Published in:
- International Journal of Applied Ceramic Technology, 2024, v. 21, n. 1, p. 451, doi. 10.1111/ijac.14525
- By:
- Publication type:
- Article
Strengthening and toughening of CNTs‐reinforced B<sub>4</sub>C‐SiC ceramic composite material via spark plasma sintering.
- Published in:
- International Journal of Applied Ceramic Technology, 2023, v. 20, n. 6, p. 3691, doi. 10.1111/ijac.14468
- By:
- Publication type:
- Article
Simulation of Microscopic Fracture Behavior in Nanocomposite Ceramic Tool Materials.
- Published in:
- Lubricants (2075-4442), 2023, v. 11, n. 11, p. 489, doi. 10.3390/lubricants11110489
- By:
- Publication type:
- Article
Mechanical performance and microstructure of 3Y‐TZP/Al<sub>2</sub>O<sub>3</sub>/GNPs medical ceramic surgical scalpel material prepared through SPS–HF dual sintering method.
- Published in:
- International Journal of Applied Ceramic Technology, 2023, v. 20, n. 5, p. 3082, doi. 10.1111/ijac.14420
- By:
- Publication type:
- Article
Effect of CaF 2 @SiO 2 on Si 3 N 4 /TiC Composite Ceramic Materials: Molecular Dynamics Analysis and Material Preparation.
- Published in:
- Crystals (2073-4352), 2023, v. 13, n. 7, p. 1025, doi. 10.3390/cryst13071025
- By:
- Publication type:
- Article
The effect of chip formation on the cutting force and tool wear in high-speed milling Inconel 718.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 127, n. 1/2, p. 335, doi. 10.1007/s00170-023-11551-6
- By:
- Publication type:
- Article
Synthesis and characterization of Al<sub>2</sub>O<sub>3</sub>‐TiC‐ZrO<sub>2</sub> ceramics with intragranular nanostructure by spark plasma sintering.
- Published in:
- International Journal of Applied Ceramic Technology, 2023, v. 20, n. 4, p. 2281, doi. 10.1111/ijac.14369
- By:
- Publication type:
- Article
Mechanism of improving the mechanical properties of Si<sub>3</sub>N<sub>4</sub>/TiC ceramic tool materials prepared by spark plasma sintering.
- Published in:
- International Journal of Applied Ceramic Technology, 2023, v. 20, n. 4, p. 2422, doi. 10.1111/ijac.14354
- By:
- Publication type:
- Article
Effect of Al Content on the Wear Evolution of Ti 1-x Al x N-Coated Tools Milling Ti-6Al-4V Alloy.
- Published in:
- Micromachines, 2023, v. 14, n. 6, p. 1228, doi. 10.3390/mi14061228
- By:
- Publication type:
- Article
Accurate Cutting-Force Measurement with Smart Tool Holder in Lathe.
- Published in:
- Sensors (14248220), 2023, v. 23, n. 9, p. 4419, doi. 10.3390/s23094419
- By:
- Publication type:
- Article
Trajectory Optimization of High-Speed Robotic Positioning with Suppressed Motion Jerk via Improved Chicken Swarm Algorithm.
- Published in:
- Applied Sciences (2076-3417), 2023, v. 13, n. 7, p. 4439, doi. 10.3390/app13074439
- By:
- Publication type:
- Article
Cutting performance and antifriction mechanism of Al<sub>2</sub>O<sub>3</sub>/TiC/TiB<sub>2</sub>/h-BN@Al<sub>2</sub>O<sub>3</sub> self-lubricating ceramic tool.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2023, v. 125, n. 1/2, p. 809, doi. 10.1007/s00170-022-10734-x
- By:
- Publication type:
- Article
Experimental Research and Numerical Simulation of Laser Welding of 303Cu/440C-Nb Stainless-Steel Thin-Walled Natural-Gas Injector for Vehicles.
- Published in:
- Materials (1996-1944), 2023, v. 16, n. 5, p. 2109, doi. 10.3390/ma16052109
- By:
- Publication type:
- Article
Performance gradient distribution of (Ti,W)C cermet by skin effects of high‐frequency spark plasma sintering.
- Published in:
- Journal of the American Ceramic Society, 2023, v. 106, n. 2, p. 1443, doi. 10.1111/jace.18803
- By:
- Publication type:
- Article
Microstructure and strengthening mechanism of Mo@Ni reinforcement (W,Ti)C cermet via spark plasma sintering.
- Published in:
- Journal of Materials Science, 2023, v. 58, n. 4, p. 1813, doi. 10.1007/s10853-022-08100-z
- By:
- Publication type:
- Article
Gut-on-a-chip for exploring the transport mechanism of Hg(II).
- Published in:
- Microsystems & Nanoengineering, 2023, v. 9, n. 1, p. 1, doi. 10.1038/s41378-022-00447-2
- By:
- Publication type:
- Article
Molecular Dynamics Simulations on the Flow Behavior of 5CB Liquid Crystal Sandwiched Between Iron Walls.
- Published in:
- Advanced Theory & Simulations, 2022, v. 5, n. 11, p. 1, doi. 10.1002/adts.202200346
- By:
- Publication type:
- Article
Phase Stability and Mechanical Properties Analysis of AlCo x CrFeNi HEAs Based on First Principles.
- Published in:
- Metals (2075-4701), 2022, v. 12, n. 11, p. 1860, doi. 10.3390/met12111860
- By:
- Publication type:
- Article
Study on Crack Repair Performance of Si<sub>3</sub>N<sub>4</sub>/TiC/ZrSi<sub>2</sub> Ceramic Tool Materials.
- Published in:
- China Mechanical Engineering, 2022, v. 33, n. 19, p. 2288, doi. 10.3969/j.issn.1004-132X.2022.19.002
- By:
- Publication type:
- Article
Addition of Nano CaF 2 @SiO 2 and SiC Whiskers in Ceramic Tools for Wear Reduction and Improved Machinability.
- Published in:
- Materials (1996-1944), 2022, v. 15, n. 15, p. 5430, doi. 10.3390/ma15155430
- By:
- Publication type:
- Article
An improved numerical integration method for prediction of milling stability using the Lagrange-Simpson interpolation scheme.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 120, n. 11/12, p. 8105, doi. 10.1007/s00170-022-09245-6
- By:
- Publication type:
- Article
On the milling strategy in machining curved surfaces based on minimum stress concentration by a 3-axis machining center.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 119, n. 11/12, p. 7475, doi. 10.1007/s00170-022-08688-1
- By:
- Publication type:
- Article
Finite element investigation of cutting performance of Cr/W-DLC/DLC composite coated cutting tool.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2022, v. 118, n. 7/8, p. 2177, doi. 10.1007/s00170-021-08093-0
- By:
- Publication type:
- Article
Modeling and prediction of cutting temperature in the machining of H13 hard steel of multi-layer coated cutting tools.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 115, n. 11/12, p. 3731, doi. 10.1007/s00170-021-07417-4
- By:
- Publication type:
- Article
Effect of SiC nanowhisker addition on microstructure and mechanical properties of regenerated cemented carbides by low‐pressure sintering.
- Published in:
- International Journal of Applied Ceramic Technology, 2021, v. 18, n. 4, p. 1222, doi. 10.1111/ijac.13748
- By:
- Publication type:
- Article
Modelling and Prediction of Cutting Temperature in the Machining of H13 Hard Steel of Transient Heat Conduction.
- Published in:
- Materials (1996-1944), 2021, v. 14, n. 12, p. 3176, doi. 10.3390/ma14123176
- By:
- Publication type:
- Article
Tool wear prediction in milling based on a GSA-BP model with a multisensor fusion method.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 114, n. 11/12, p. 3793, doi. 10.1007/s00170-021-07152-w
- By:
- Publication type:
- Article
Mechanical Properties and Microstructures of Al 2 O 3 /TiC/TiB 2 Ceramic Tool Material.
- Published in:
- Crystals (2073-4352), 2021, v. 11, n. 6, p. 637, doi. 10.3390/cryst11060637
- By:
- Publication type:
- Article
Electrochemical biosensors for measurement of colorectal cancer biomarkers.
- Published in:
- Analytical & Bioanalytical Chemistry, 2021, v. 413, n. 9, p. 2407, doi. 10.1007/s00216-021-03197-8
- By:
- Publication type:
- Article
A theoretical model to study the cutting force characteristics in remanufacturing turning of laser cladded coatings.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2021, v. 113, n. 3/4, p. 757, doi. 10.1007/s00170-021-06681-8
- By:
- Publication type:
- Article
Effect of the Characteristic Size and Content of Graphene on the Crack Propagation Path of Alumina/Graphene Composite Ceramics.
- Published in:
- Materials (1996-1944), 2021, v. 14, n. 3, p. 611, doi. 10.3390/ma14030611
- By:
- Publication type:
- Article
Preparation and Performance of Al2O3/Ti(C,N)-Added ZrO2 Whisker and NanoCoated CaF2@Al(OH)3 Powder.
- Published in:
- Applied Sciences (2076-3417), 2020, v. 10, n. 13, p. 4435, doi. 10.3390/app10134435
- By:
- Publication type:
- Article
Influence of CaF2@Al2O3 on Cutting Performance and Wear Mechanism of Al2O3/Ti(C,N)/CaF2@Al2O3 Self-Lubricating Ceramic Tools in Turning.
- Published in:
- Materials (1996-1944), 2020, v. 13, n. 13, p. 2922, doi. 10.3390/ma13132922
- By:
- Publication type:
- Article
On cutting temperatures in high and ultrahigh-speed machining.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2020, v. 107, n. 1/2, p. 73, doi. 10.1007/s00170-020-05054-x
- By:
- Publication type:
- Article
Cohesive Element Model for Fracture Behavior Analysis of Al2O3/Graphene Composite Ceramic Tool Material.
- Published in:
- Crystals (2073-4352), 2019, v. 9, n. 12, p. 669, doi. 10.3390/cryst9120669
- By:
- Publication type:
- Article
Preparation of Al2O3/Ti(C,N)/ZrO2/CaF2@Al(OH)3 Ceramic Tools and Cutting Performance in Turning.
- Published in:
- Materials (1996-1944), 2019, v. 12, n. 23, p. 3820, doi. 10.3390/ma12233820
- By:
- Publication type:
- Article
Synthesis and Mechanical Characterization of a Ti(C,N)/Mo–Co–Ni/CaF2@Al2O3 Self-Lubricating Cermet.
- Published in:
- Materials (1996-1944), 2019, v. 12, n. 23, p. 3981, doi. 10.3390/ma12233981
- By:
- Publication type:
- Article
Synthesis and Simulation of CaF2@Al(OH)3 Core-Shell Coated Solid Lubricant Composite Powder.
- Published in:
- Crystals (2073-4352), 2019, v. 9, n. 11, p. 578, doi. 10.3390/cryst9110578
- By:
- Publication type:
- Article
Preparation and mechanical properties of Si<sub>3</sub>N<sub>4</sub> nanocomposites reinforced by Si<sub>3</sub>N<sub>4</sub>@rGO particles.
- Published in:
- Journal of the American Ceramic Society, 2019, v. 102, n. 11, p. 6991, doi. 10.1111/jace.16546
- By:
- Publication type:
- Article
Synthesis of CaF2 Nanoparticles Coated by SiO2 for Improved Al2O3/TiC Self-Lubricating Ceramic Composites.
- Published in:
- Nanomaterials (2079-4991), 2019, v. 9, n. 11, p. 1522, doi. 10.3390/nano9111522
- By:
- Publication type:
- Article
Lubrication Performance of Graphene as Lubricant Additive in 4-n-pentyl-4′-cyanobiphyl Liquid Crystal (5CB) for Steel/Steel Contacts.
- Published in:
- Materials (1996-1944), 2018, v. 11, n. 11, p. 2110, doi. 10.3390/ma11112110
- By:
- Publication type:
- Article
Investigation on size effect of specific cutting energy in mechanical micro-cutting.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2017, v. 91, n. 5-8, p. 2621, doi. 10.1007/s00170-016-9934-0
- By:
- Publication type:
- Article
Theoretical modeling and experimental validation of specific cutting force for micro end milling.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2015, v. 77, n. 5-8, p. 1433, doi. 10.1007/s00170-014-6549-1
- By:
- Publication type:
- Article
Influence of size effect on burr formation in micro cutting.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2013, v. 68, n. 9-12, p. 1911, doi. 10.1007/s00170-013-4801-8
- By:
- Publication type:
- Article
Cutting behavior and related cracks in wear and fracture of ceramic tool materials.
- Published in:
- International Journal of Advanced Manufacturing Technology, 2007, v. 32, n. 11/12, p. 1083, doi. 10.1007/s00170-006-0431-8
- By:
- Publication type:
- Article
Effects of carbon on the microstructure and fracture toughness of composite ceramic materials.
- Published in:
- Journal of Materials Science, 2005, v. 40, n. 16, p. 4419, doi. 10.1007/s10853-005-3826-2
- By:
- Publication type:
- Article