Found: 54
Select item for more details and to access through your institution.
Experimental Investigation on Machine-Induced Damages during the Milling Test of Graphene/Carbon Incorporated Thermoset Polymer Nanocomposites.
- Published in:
- Journal of Composites Science, 2022, v. 6, n. 3, p. 77, doi. 10.3390/jcs6030077
- By:
- Publication type:
- Article
Production and tribological performance under sliding contact conditions of zirconia and reduced graphene oxide loaded polymer nanocomposites for biomedical applications.
- Published in:
- Polymer Composites, 2023, v. 44, n. 11, p. 8097, doi. 10.1002/pc.27691
- By:
- Publication type:
- Article
Dermatophytic infection and in vitro activities of antifungal drugs against dermatophytes in rural India.
- Published in:
- Microbiologia Medica, 2021, v. 36, n. 3, p. 3, doi. 10.4081/mm.2021.9917
- By:
- Publication type:
- Article
Characterization & evaluation of Al7075 MMCs reinforced with ceramic particulates and influence of age hardening on their tensile behavior.
- Published in:
- Journal of Mechanical Science & Technology, 2018, v. 32, n. 7, p. 3123, doi. 10.1007/s12206-018-0615-9
- By:
- Publication type:
- Article
USING ADDITIVE RATIO ASSESSMENT AND ARTIFICIAL BEE COLONY (ARAS-ABC) OPTIMIZATION ALGORITHM DURING DRILLING OF CARBON NANOMATERIAL/GLASS FIBER-REINFORCED POLYMER LAMINATED COMPOSITES.
- Published in:
- Surface Review & Letters, 2023, v. 30, n. 11, p. 1, doi. 10.1142/S0218625X23500749
- By:
- Publication type:
- Article
A NOVEL HYBRIDIZATION OF SEAGULL ALGORITHM AND COMBINED COMPROMISE SOLUTION (SOA–CoCoSo) IN DRILLING INVESTIGATION OF CARBON NANO-ONION-MODIFIED POLYMER COMPOSITES FOR STRUCTURAL APPLICATION.
- Published in:
- Surface Review & Letters, 2022, v. 29, n. 4, p. 1, doi. 10.1142/S0218625X22500548
- By:
- Publication type:
- Article
A NEW CRITERION FOR DRILLING MACHINABILITY EVALUATION OF NANOCOMPOSITES MODIFIED BY GRAPHENE/CARBON FIBER EPOXY MATRIX AND OPTIMIZATION USING COMBINED COMPROMISE SOLUTION.
- Published in:
- Surface Review & Letters, 2021, v. 28, n. 9, p. 1, doi. 10.1142/S0218625X21500827
- By:
- Publication type:
- Article
Classifying COVID-19 and Viral Pneumonia Lung Infections through Deep Convolutional Neural Network Model using Chest X-Ray Images.
- Published in:
- Journal of Medical Physics, 2022, v. 47, n. 1, p. 57, doi. 10.4103/jmp.jmp_100_21
- By:
- Publication type:
- Article
Contribution and assessment of recycled menthol mint vermicompost on productivity and soil quality in mint and mint–rice–wheat rotation: A case study.
- Published in:
- 2013
- By:
- Publication type:
- Case Study
ANN-BASED SURFACE ROUGHNESS MODELLING OF AA7075-T6 SLOT MILLING: CUTTING TECHNIQUE EVALUATION.
- Published in:
- Academic Journal of Manufacturing Engineering, 2023, v. 21, n. 4, p. 27
- By:
- Publication type:
- Article
Predictive Modeling and Correlated Response Optimization of Polymethylmethacrylate (PMMA)-Based Bio-Nano-Composite Material Using a Hybrid Module.
- Published in:
- Nano Life, 2022, v. 12, n. 1, p. 1, doi. 10.1142/S1793984421500057
- By:
- Publication type:
- Article
Contemporary Development on the Performance and Functionalization of Ultra High Molecular Weight Polyethylene (UHMWPE) for Biomedical Implants.
- Published in:
- Nano Life, 2021, v. 11, n. 03, p. 1, doi. 10.1142/S1793984421300090
- By:
- Publication type:
- Article
Pattern and Profile of Injuries Sustained During Assault by Sharp Weapon: A Prosective Study During Year 2015-16 at Sms Medical College-Jaipur.
- Published in:
- Indian Journal of Forensic Medicine & Toxicology, 2020, v. 14, n. 3, p. 83, doi. 10.37506/ijfmt.v14i3.10331
- By:
- Publication type:
- Article
Pattern of Injuries in Death Cases of Unintentional Fall from Height: A Prospective Study at SMS Medical College During 2015-2016.
- Published in:
- Indian Journal of Forensic Medicine & Toxicology, 2019, v. 13, n. 4, p. 189, doi. 10.5958/0973-9130.2019.00286.X
- By:
- Publication type:
- Article
Distal Intravenous Regional Anaesthesia for Claw Diseases in Bovines.
- Published in:
- Indian Journal of Animal Research, 2020, v. 54, n. 5, p. 614, doi. 10.18805/ijar.B-3815
- By:
- Publication type:
- Article
Bioinoculants and Vermicompost Improve Ocimum basilicum Yield and Soil Health in a Sustainable Production System.
- Published in:
- CLEAN: Soil, Air, Water, 2016, v. 44, n. 6, p. 686, doi. 10.1002/clen.201400639
- By:
- Publication type:
- Article
EFFECT OF MORINGA LEAF POWDER ON THE MICROBIOLOGICAL QUALITY OF CHICKEN NUGGETS UNDER REFRIGERATION CONDITION.
- Published in:
- Journal of Experimental Zoology India, 2024, v. 27, n. 1, p. 582, doi. 10.51470/jez.2024.27.1.585
- By:
- Publication type:
- Article
NANOTECHNOLOGY BASED MATERIALS AND THEIR INNOVATIVE USAGES IN ANIMAL HEALTH.
- Published in:
- Journal of Experimental Zoology India, 2017, v. 20, n. 2, p. 665
- By:
- Publication type:
- Article
EFFECT OF ZIRCONIA AND GRAPHENE NANOPARTICLES LOADING ON THERMO-MECHANICAL PERFORMANCE OF HYBRID POLYMER NANOCOMPOSITE.
- Published in:
- Archives of Metallurgy & Materials, 2024, v. 69, n. 2, p. 579, doi. 10.24425/amm.2024.149786
- By:
- Publication type:
- Article
Measurement and evaluation of delamination factors and thrust force generation during drilling of multiwall carbon nanotube (MWCNT) modified polymer laminates.
- Published in:
- Archive of Mechanical Engineering, 2022, v. 69, n. 2, p. 269, doi. 10.24425/ame.2022.140417
- By:
- Publication type:
- Article
Swarm intelligence integrated approach for experimental investigation in milling of multiwall carbon nanotube/polymer nanocomposites.
- Published in:
- Archive of Mechanical Engineering, 2020, v. 67, n. 3, p. 353, doi. 10.24425/ame.2020.131698
- By:
- Publication type:
- Article
Predictive modeling and machining performance optimization during drilling of polymer nanocomposites reinforced by graphene oxide/carbon fiber.
- Published in:
- Archive of Mechanical Engineering, 2020, v. 67, n. 2, p. 229, doi. 10.24425/ame.2020.131692
- By:
- Publication type:
- Article
A Modified Decision-Making Optimization Approach During Machining of Carbon Fabric and Reduced Graphene Oxide Reinforced (CF/rGO) Polymer Nanocomposites.
- Published in:
- Journal of Multiscale Modeling, 2023, v. 14, n. 3, p. 1, doi. 10.1142/S1756973723500051
- By:
- Publication type:
- Article
Investigation on Thrust and Torque Generation During Drilling of Hybrid Laminates Composite with Different Stacking Sequences Using Multiobjective Optimization Module.
- Published in:
- Journal of Multiscale Modeling, 2021, v. 12, n. 3, p. 1, doi. 10.1142/S1756973721500098
- By:
- Publication type:
- Article
Taguchi technique to identify factors affecting compression behavior of carpets.
- Published in:
- Melliand International, 2017, n. 4, p. 0208
- By:
- Publication type:
- Article
An artificial neural network model for estimating Mentha crop biomass yield using Landsat 8 OLI.
- Published in:
- Precision Agriculture, 2020, v. 21, n. 1, p. 18, doi. 10.1007/s11119-019-09655-9
- By:
- Publication type:
- Article
Impact of Different Therapies on Haematological Parameters and Therapeutic Outcome in Subclinical Endometritic Buffaloes.
- Published in:
- Indian Journal of Veterinary Sciences & Biotechnology, 2023, v. 19, n. 5, p. 60, doi. 10.48165/ijvsbt.19.5.12
- By:
- Publication type:
- Article
Development of reduced Graphene oxide modified Ultrahigh molecular weight polyethylene (rGO/UHMWPE) based Nanocomposites for Biomedical Applications.
- Published in:
- Journal of Thermoplastic Composite Materials, 2023, v. 36, n. 9, p. 3516, doi. 10.1177/08927057221129486
- By:
- Publication type:
- Article
Incorporation of graphene nanoplatelets/hydroxyapatite in PMMA bone cement for characterization and enhanced mechanical properties of biopolymer composites.
- Published in:
- Journal of Thermoplastic Composite Materials, 2023, v. 36, n. 5, p. 1978, doi. 10.1177/08927057221086833
- By:
- Publication type:
- Article
Nature instigated Grey wolf algorithm for parametric optimization during machining (Milling) of polymer nanocomposites.
- Published in:
- Journal of Thermoplastic Composite Materials, 2023, v. 36, n. 1, p. 118, doi. 10.1177/0892705721993202
- By:
- Publication type:
- Article
Neural network modeling and combined compromise solution (CoCoSo) method for optimization of drilling performances in polymer nanocomposites.
- Published in:
- Journal of Thermoplastic Composite Materials, 2022, v. 35, n. 10, p. 1604, doi. 10.1177/0892705720939165
- By:
- Publication type:
- Article
Diagnostic evaluation of Transvaginal Sonographic Elastography to identify Endometrial Carcinoma.
- Published in:
- Journal of Cardiovascular Disease Research (Journal of Cardiovascular Disease Research), 2024, v. 15, n. 3, p. 110
- By:
- Publication type:
- Article
Comparison of Antigen Detection and Nested PCR in CSF Samples of HIV Positive and Negative Patients with Suspected Cryptococcal Meningitis in a Tertiary Care Hospital.
- Published in:
- Journal of Clinical & Diagnostic Research, 2016, v. 10, n. 4, p. 12, doi. 10.7860/JCDR/2016/18322.7619
- By:
- Publication type:
- Article
Microbial Inoculants Assisted Growth of Chrysopogon zizanioides Promotes Phytoremediation of Salt Affected Soil.
- Published in:
- Indian Journal of Microbiology, 2019, v. 59, n. 2, p. 137, doi. 10.1007/s12088-018-00776-9
- By:
- Publication type:
- Article
A Critical Review on Synthesis, Characterization and Multifunctional Applications of Reduced Graphene Oxide (rGO)/Composites.
- Published in:
- NANO, 2021, v. 16, n. 9, p. 1, doi. 10.1142/S1793292021300085
- By:
- Publication type:
- Article
Development of Cellulose Scaffolds Derived from Ficus benjamina Leaves for Tissue Engineering Applications.
- Published in:
- Trends in Biomaterials & Artificial Organs, 2024, v. 38, n. 2, p. 85, doi. 10.5281/zenodo.12183830
- By:
- Publication type:
- Article
Multiple Response Optimization in Machining (Milling) of Graphene Oxide-Doped Epoxy/CFRP Composite Using CoCoSo-PCA: A Novel Hybridization Approach.
- Published in:
- Journal of Advanced Manufacturing Systems, 2021, v. 20, n. 2, p. 423, doi. 10.1142/S0219686721500207
- By:
- Publication type:
- Article
Multiple Machining Performance Optimization in Drilling of MWCNT/Epoxy Nanocomposites Using TOPSIS and Grey Theory.
- Published in:
- Journal of Advanced Manufacturing Systems, 2021, v. 20, n. 2, p. 249, doi. 10.1142/S021968672150013X
- By:
- Publication type:
- Article
Influence of rotation speed, transverse speed, and pin length during underwater friction stir welding (UW-FSW) on aluminum AA6063: A novel criterion for parametric control.
- Published in:
- International Journal of Lightweight Materials & Manufacture, 2022, v. 5, n. 3, p. 295, doi. 10.1016/j.ijlmm.2022.03.001
- By:
- Publication type:
- Article
Understanding the Effect of Irrigation with Chromium Loaded Tannery Effluent on Ocimum basilicum L. vis-a-vis Metal Uptake.
- Published in:
- Bulletin of Environmental Contamination & Toxicology, 2022, v. 109, n. 5, p. 747, doi. 10.1007/s00128-022-03599-z
- By:
- Publication type:
- Article
WASPAS METHOD FOR CORRELATED RESPONSE OPTIMIZATION DURING DRILLING OF NANO ONIONS STRUCTURED CARBONRE-INFORCED POLYMER COMPOSITES.
- Published in:
- International Journal of Industrial Engineering, 2021, v. 28, n. 4, p. 425
- By:
- Publication type:
- Article
DELAMINATION ASSESSMENT DURING MACHINING OF LAMINATED POLYMER NANOCOMPOSITE.
- Published in:
- International Journal of Modern Manufacturing Technologies (IJMMT), 2021, v. 13, n. 2, p. 109, doi. 10.54684/ijmmt.2021.13.2.109
- By:
- Publication type:
- Article
EXPERIMENTAL INVESTIGATIONS IN ELECTRIC DISCHARGE MACHINING OF INCONEL-X 750 USING HYBRID OPTIMIZATION APPROACH.
- Published in:
- International Journal of Modern Manufacturing Technologies (IJMMT), 2021, v. 13, n. 1, p. 96
- By:
- Publication type:
- Article
Evaluation of Machining Characteristics and Tool Wear During Drilling of Carbon/Aluminium Laminated.
- Published in:
- FME Transactions, 2024, v. 52, n. 3, p. 343, doi. 10.5937/fme2403343M
- By:
- Publication type:
- Article
Experimental Investigations and Multiple criteria Optimization during Milling of Graphene Oxide (GO) doped epoxy/CFRP Composites Using TOPSIS-AHP hybrid Module.
- Published in:
- FME Transactions, 2020, v. 48, n. 3, p. 628, doi. 10.5937/fme2003628K
- By:
- Publication type:
- Article
Artificial Neural Network-Based Modeling of Surface Roughness in Machining of Multiwall Carbon Nanotube Reinforced Polymer (Epoxy) Nanocomposites.
- Published in:
- FME Transactions, 2020, v. 48, n. 3, p. 693, doi. 10.5937/fme2003693K
- By:
- Publication type:
- Article
A Combined Approach of Nature-Inspired Firefly Algorithm and Weighted Principal Component Analysis in Machining of Inconel X-750.
- Published in:
- FME Transactions, 2020, v. 48, n. 2, p. 439, doi. 10.5937/fme2002439P
- By:
- Publication type:
- Article
Grey Embedded in Artificial Neural Network (ANN) Based on Hybrid Optimization Approach in Machining of GFRP Epoxy Composites.
- Published in:
- FME Transactions, 2019, v. 47, n. 3, p. 641, doi. 10.5937/fmet1903641P
- By:
- Publication type:
- Article
Non-Candida albicans Candida species: virulence factors and species identification in India.
- Published in:
- Current Medical Mycology, 2021, v. 7, n. 2, p. 8, doi. 10.18502/cmm.7.2.7032
- By:
- Publication type:
- Article
3D-FEM Approach of AISI-52100 Hard Turning: Modelling of Cutting Forces and Cutting Condition Optimization.
- Published in:
- Machines, 2022, v. 10, n. 2, p. N.PAG, doi. 10.3390/machines10020074
- By:
- Publication type:
- Article