Works by Ramos, Nathalia de Carvalho

Results: 22

Crystallization by microwave energy: Effects on the survival probability of lithia-based glass ceramics.

Published in:

Brazilian Oral Research, 2024, v. 38, p. 1, doi. 10.1590/1807-3107BOR-2024.vol38.0127

By:

Santos DIAMANTINO, Pedro;
da Silva RODRIGUES, Camila;
Gomes de CARVALHO, Ana Beatriz;
Mendes TRIBST, João Paulo;
RIQUIERI, Hilton;
de Carvalho RAMOS, Nathália;
da Costa Cabecinha Pacheco VIEGAS, Diogo Miguel;
Pedroso BERGAMO, Edmara Tatiely;
Augusto BONFANTE, Estevam;
Ferreira Anzaloni SAAVEDRA, Guilherme de Siqueira

Publication type:

Article

Correction: Silveira et al. Bond Strength between Different Zirconia-Based Ceramics and Resin Cement before and after Aging. Coatings 2022, 12 , 1601.

Published in:

2023

By:

Silveira, Marcos Paulo Motta;
Ramos, Nathália de Carvalho;
Lopes, Guilherme da Rocha Scalzer;
Tribst, João Paulo Mendes;
Bottino, Marco Antonio

Publication type:

Correction Notice

Influence of Optional Crystallization Firing on the Adhesion of Zirconia-Reinforced Lithium Silicate before and after Aging.

Published in:

Coatings (2079-6412), 2022, v. 12, n. 12, p. 1904, doi. 10.3390/coatings12121904

By:

Rodrigues, Murilo Rocha;
Grangeiro, Manassés Tercio Vieira;
Rossi, Natalia Rivoli;
de Carvalho Ramos, Nathalia;
de Carvalho, Rodrigo Furtado;
Kimpara, Estevão Tomomitsu;
Tribst, João Paulo Mendes;
de Arruda Paes Junior, Tarcisio José

Publication type:

Article

Bond Strength between Different Zirconia-Based Ceramics and Resin Cement before and after Aging.

Published in:

Coatings (2079-6412), 2022, v. 12, n. 10, p. 1601, doi. 10.3390/coatings12101601

By:

Silveira, Marcos Paulo Motta;
Ramos, Nathália de Carvalho;
Lopes, Guilherme da Rocha Scalzer;
Tribst, João Paulo Mendes;
Bottino, Marco Antonio

Publication type:

Article

Adhesive Cementation of CAD/CAM Silica-based Ceramics: Effect of Adhesive Type and Long-term Aging on the Bond Strength to Composite Cement.

Published in:

Journal of Adhesive Dentistry, 2024, v. 26, n. 1, p. 125, doi. 10.3290/j.jad.b5341383

By:

Ramos da Silva, Nathalia;
Duarte, Evelynn Crhistyann Medeiros;
Duarte Moura, Dayanne Monielle;
de Carvalho Ramos, Nathália;
Souza, Karina Barbosa;
Roberto Dametto, Fábio;
Özcan, Mutlu;
Bottino, Marco Antonio;
de Assunção e Souza, Rodrigo Othávio

Publication type:

Article

Interfacial Fracture Energy Between New Translucent Zirconias and a Resin Cement.

Published in:

Journal of Adhesive Dentistry, 2022, v. 24, n. 1, p. 147, doi. 10.3290/j.jad.b2916403

By:

Ortiz Nadal, Laura Patricia;
de Carvalho Ramos, Nathália;
Mendes Tribst, João Paulo;
Costa Anami, Lilian;
Marques de Melo, Renata;
Antonio Bottino, Marco

Publication type:

Article

Wear of dental ceramics.

Published in:

Brazilian Dental Science, 2023, v. 26, n. 1, p. 1, doi. 10.4322/bds.2023.e3638

By:

de Carvalho RAMOS, Nathália;
AUGUSTO, Marina Gullo;
Martins ALVES, Larissa Márcia;
KLEVERLAAN, Cornelis Johannes;
de Oliveira DAL PIVA, Amanda Maria

Publication type:

Article

EFFECT OF SURFACE TREATMENT ON FLEXURAL STRENGTH AND SUBCRITICAL CRACK GROWTH OF LITHIUM DISILICATE: AN IN VITRO STUDY.

Published in:

Bioscience Journal, 2023, v. 39, p. 1, doi. 10.14393/BJ-v39n0a2023-61416

By:

DE CARVALHO, Ronaldo Luís Almeida;
MIRANDA, Jean Soares;
RAMOS, Nathália de Carvalho;
WEITZEL, Isabela Sandim Souza Leite;
AMARAL, Marina;
KIMPARA, Estevão Tomomitsu

Publication type:

Article

Biomechanical evaluation of 3-unit fixed partial dentures on monotype and two-piece zirconia dental implants.

Published in:

Computer Methods in Biomechanics & Biomedical Engineering, 2022, v. 25, n. 3, p. 239, doi. 10.1080/10255842.2021.1946798

By:

de Matos, Jefferson David Melo;
Lopes, Guilherme da Rocha Scalzer;
Nakano, Leonardo Jiro Nomura;
Ramos, Nathália de Carvalho;
Vasconcelos, John Eversong Lucena de;
Bottino, Marco Antonio;
Tribst, João Paulo Mendes

Publication type:

Article

Mechanical behavior and microstructural characterization of different zirconia polycrystals in different thicknesses.

Published in:

Journal of Advanced Prosthodontics, 2021, v. 13, n. 6, p. 385, doi. 10.4047/jap.2021.13.6.385

By:

Calvache Arcila, Laura Viviana;
de Carvalho Ramos, Nathália;
Bastos Campos, Tiago Moreira;
Serafini Dapieve, Kiara;
Felipe Valandro, Luiz;
Marques de Melo, Renata;
Antonio Bottino, Marco

Publication type:

Article

Fatigue behavior and stress distribution of molars restored with MOD inlays with and without deep margin elevation.

Published in:

Clinical Oral Investigations, 2022, v. 26, n. 3, p. 2513, doi. 10.1007/s00784-021-04219-6

By:

Grassi, Elisa Donaria Aboucauch;
de Andrade, Guilherme Schmitt;
Tribst, João Paulo Mendes;
Machry, Renan Vaz;
Valandro, Luiz Felipe;
Ramos, Nathalia de Carvalho;
Bresciani, Eduardo;
Saavedra, Guilherme de Siqueira Ferreira Anzaloni

Publication type:

Article

Influence of CAD/CAM Abutment Heights on the Biomechanical Behavior of Zirconia Single Crowns.

Published in:

Metals (2075-4701), 2022, v. 12, n. 12, p. 2025, doi. 10.3390/met12122025

By:

de Matos, Jefferson David Melo;
Gomes, Leonardo Silva;
de Carvalho Ramos, Nathália;
Queiroz, Daher Antonio;
Tribst, João Paulo Mendes;
Campos, Tiago Moreira Bastos;
Borges, Alexandre Luiz Souto;
da Rocha Scalzer Lopes, Guilherme;
Bottino, Marco Antonio;
Paes Junior, Tarcisio José Arruda

Publication type:

Article

Occlusal Scheme Effect on the Biomechanical Response of Full-Arch Dental Prosthesis Supported by Titanium Implants: A Systematic Review.

Published in:

Metals (2075-4701), 2021, v. 11, n. 10, p. 1574, doi. 10.3390/met11101574

By:

Gomes, Laís Carolina Landim;
Pierre, Fernanda Zapater;
Tribst, João Paulo Mendes;
Ramos, Nathália de Carvalho;
Bresciani, Eduardo;
de Araújo, Rodrigo Máximo;
Júnior, Lafayette Nogueira;
Bottino, Marco Antonio

Publication type:

Article

Effect of staining layer on roughness after progressive wear of monolithic ceramics.

Published in:

Journal of Esthetic & Restorative Dentistry, 2023, v. 35, n. 6, p. 927, doi. 10.1111/jerd.13067

By:

de Matos, Jefferson David Melo;
da Rocha Scalzer Lopes, Guilherme;
Queiroz, Daher Antonio;
Campos, Tiago Moreira Bastos;
de Carvalho Ramos, Nathalia;
Bottino, Marco Antonio

Publication type:

Article

Bioengineering Tools Applied to Dentistry: Validation Methods for In Vitro and In Silico Analysis.

Published in:

Dentistry Journal, 2022, v. 10, n. 8, p. 145, doi. 10.3390/dj10080145

By:

Matos, Jefferson David Melo de;
Queiroz, Daher Antonio;
Nakano, Leonardo Jiro Nomura;
Andrade, Valdir Cabral;
Ribeiro, Nathália de Carvalho Ramos;
Borges, Alexandre Luiz Souto;
Bottino, Marco Antonio;
Lopes, Guilherme da Rocha Scalzer

Publication type:

Article

Clinical Adjustment of Zirconia-Reinforced Lithium Silicate and Lithium Disilicate Restorations Should Be Performed Before Crystallization.

Published in:

Materials (1996-1944), 2025, v. 18, n. 9, p. 1944, doi. 10.3390/ma18091944

By:

Baroudi, Kusai;
Almeida, Nathália Ribeiro de;
de Abreu, Laura Salerno;
Wandscher, Vinícius Felipe;
Ramos, Nathalia de Carvalho;
Padmanabhan, Vivek;
Bucholz, Caroline Andrade;
Amaral, Marina

Publication type:

Article

Characterization of Microstructure, Optical Properties, and Mechanical Behavior of a Temporary 3D Printing Resin: Impact of Post-Curing Time.

Published in:

Materials (1996-1944), 2024, v. 17, n. 7, p. 1496, doi. 10.3390/ma17071496

By:

Siqueira, Joyce Roma Correia dos Santos;
Rodriguez, Rita Maria Morejon;
Campos, Tiago Moreira Bastos;
Ramos, Nathalia de Carvalho;
Bottino, Marco Antonio;
Tribst, João Paulo Mendes

Publication type:

Article

Influence of the Peek Abutments on Mechanical Behavior of the Internal Connections Single Implant.

Published in:

Materials (1996-1944), 2022, v. 15, n. 22, p. 8133, doi. 10.3390/ma15228133

By:

Matos, Jefferson David Melo de;
Lopes, Guilherme da Rocha Scalzer;
Queiroz, Daher Antonio;
Pereira, André Luiz Jesus;
Sinhoreti, Mário Alexandre Coelho;
Ramos, Nathália de Carvalho;
Lino, Vinicius;
de Oliveira, Flavio Rosa;
Borges, Alexandre Luiz Souto;
Bottino, Marco Antonio

Publication type:

Article

Effect of Surface-Etching Treatment, Glaze, and the Antagonist on Roughness of a Hybrid Ceramic after Two-Body Wear.

Published in:

Materials (1996-1944), 2022, v. 15, n. 19, p. 6870, doi. 10.3390/ma15196870

By:

Grangeiro, Manassés Tercio Vieira;
Rodrigues, Camila da Silva;
Rossi, Natália Rivoli;
da Silva, Jadson Mathyas Domingos;
Ramos, Nathalia de Carvalho;
Tribst, João Paulo Mendes;
Anami, Lilian Costa;
Bottino, Marco Antonio

Publication type:

Article

Influence of Abutment Design on Biomechanical Behavior to Support a Screw-Retained 3-Unit Fixed Partial Denture.

Published in:

Materials (1996-1944), 2022, v. 15, n. 18, p. 6235, doi. 10.3390/ma15186235

By:

Lopes, Guilherme da Rocha Scalzer;
Matos, Jefferson David Melo de;
Queiroz, Daher Antonio;
Tribst, João Paulo Mendes;
Ramos, Nathália de Carvalho;
Rocha, Mateus Garcia;
Barbosa, Adriano Baldotto;
Bottino, Marco Antonio;
Borges, Alexandre Luiz Souto;
Nishioka, Renato Sussumu

Publication type:

Article

Implant-Supported Restoration with Straight and Angled Hybrid Abutments: Digital Image Correlation and 3D-Finite Element Analysis.

Published in:

European Journal of General Dentistry, 2022, v. 11, n. 1, p. 23, doi. 10.1055/s-0042-1744362

By:

Demachkia, Amir Mohidin;
Sichi, Luigi Giovanni Bernardo;
Rodrigues, Jonas Vinicius Meireles;
Junior, Lafayette Nogueira;
Araújo, Rodrigo Máximo de;
Ramos, Nathalia de Carvalho;
Bottino, Marco Antonio;
Tribst, João Paulo Mendes

Publication type:

Article

Effect of Finishing Protocols on the Surface Roughness and Fatigue Strength of a High-Translucent Zirconia.

Published in:

International Journal of Dentistry, 2023, p. 1, doi. 10.1155/2023/8882878

By:

Barreto, Larissa Araújo Lopes;
Grangeiro, Manassés Tercio Vieira;
Prado, Pedro Henrique Condé Oliveira;
Bottino, Marco Antonio;
Dal Piva, Amanda Maria de Oliveira;
Ramos, Nathalia de Carvalho;
Tribst, João Paulo Mendes;
Junior, Lafayette Nogueira

Publication type:

Article