Works by Rahandi Lubis, Muhammad Adly

Results: 69

Modification of Oxidized Starch Polymer with Nanoclay for Enhanced Adhesion and Free Formaldehyde Emission of Plywood.

Published in:

Journal of Polymers & the Environment, 2021, v. 29, n. 9, p. 2993, doi. 10.1007/s10924-021-02101-w

By:

Lubis, Muhammad Adly Rahandi;
Yadav, Sumit Manohar;
Park, Byung-Dae

Publication type:

Article

Effects of Adhesives on the Physical and Mechanical Properties of Chip Block Pallets from Mixed Forest Group Wood Biomass.

Published in:

BioResources, 2025, v. 20, n. 2, p. 3788, doi. 10.15376/biores.20.2.3788-3807

By:

Syukur, Abdus;
Damanik, Alessandro Geovani;
Mubarok, Mahdi;
Hermawan, Dede;
Sutiawan, Jajang;
Kartikawati, Aprilia;
Lubis, Muhammad Adly Rahandi;
Kusumah, Sukma Surya;
Wibowo, Eko Setio;
Narto;
Purnomo, Deni;
Sudarmanto;
Hidayat, Asep

Publication type:

Article

Feasibility of Bio-Based Molasses and Citric Acid for The Manufacturing of Oil Palm Frond Particleboard.

Published in:

BioResources, 2025, v. 20, n. 2, p. 2656, doi. 10.15376/biores.20.2.2656-2669

By:

Saad, Sahriyanti;
Augustina, Sarah;
Sutiawan, Jajang;
Surya, Sukma;
Lubis, Muhammad Adly Rahandi;
Syahfitri, Alifah;
Syukur, Abdus;
Abdillah, Imam Busyra;
Aulia, Muhammad Ilham;
Wahyudi, Imam;
Hermawan, Dede;
Suhasman, S.

Publication type:

Article

Performance of Oriented Strand Board Bonded with a Hybrid Phenol-Formaldehyde/Polymeric Methylene Diphenyl Diisocyanate Adhesives System.

Published in:

BioResources, 2024, v. 19, n. 4, p. 8103, doi. 10.15376/biores.19.4.8103-8123

By:

Sari, Rita Kartika;
Fitrianum, Fadilah;
Kristak, Lubos;
Maulana, Muhammad Iqbal;
Antov, Petar;
Wahyu Hidayat;
Iswanto, Apri Heri;
Seng Hua Lee;
Rahandi Lubis, Muhammad Adly

Publication type:

Article

Tuning of Adhesion and Disintegration of Oxidized Starch Adhesives for the Recycling of Medium Density Fiberboard.

Published in:

BioResources, 2020, v. 15, n. 3, p. 5156, doi. 10.15376/biores.15.3.5156-5178

By:

Lubis, Muhammad Adly Rahandi;
Byung-Dae Park;
Min-Kug Hong

Publication type:

Article

Utilization of Spent Coffee Grounds as a Sustainable Resource for the Synthesis of Bioplastic Composites with Polylactic Acid, Starch, and Sucrose.

Published in:

Journal of Composites Science, 2023, v. 7, n. 12, p. 512, doi. 10.3390/jcs7120512

By:

Masssijaya, Sri Yustikasari;
Lubis, Muhammad Adly Rahandi;
Nissa, Rossy Choerun;
Nurhamiyah, Yeyen;
Nugroho, Pramono;
Antov, Petar;
Lee, Seng-Hua;
Papadopoulos, Antonios N.;
Kusumah, Sukma Surya;
Karlinasari, Lina

Publication type:

Article

Adhesion and Cohesion Strength of Phenol-Formaldehyde Resin Mixed with Different Types and Levels of Catalyst for Wood Composites.

Published in:

Journal of Composites Science, 2023, v. 7, n. 8, p. 310, doi. 10.3390/jcs7080310

By:

Fitrianum, Fadilah;
Lubis, Muhammad Adly Rahandi;
Hadi, Yusuf Sudo;
Sari, Rita Kartika;
Maulana, Muhammad Iqbal;
Kristak, Lubos;
Iswanto, Apri Heri;
Mardawati, Efri;
Reh, Roman;
Sedliacik, Jan

Publication type:

Article

Properties of Plywood Bonded with Formaldehyde-Free Adhesive Based on Poly(vinyl alcohol)--Tannin--Hexamine at Different Formulations and Cold-Pressing Times.

Published in:

Journal of Composites Science, 2023, v. 7, n. 3, p. 1, doi. 10.3390/jcs7030113

By:

Sari, Ratih Afrida Lismana;
Lubis, Muhammad Adly Rahandi;
Sari, Rita Kartika;
Kristak, Lubos;
Iswanto, Apri Heri;
Mardawati, Efri;
Fatriasari, Widya;
Seng Hua Lee;
Reh, Roman;
Sedliacik, Jan;
Maulana, Muhammad Iqbal;
Suryanegara, Lisman;
Subiyanto, Bambang;
Maulana, Sena

Publication type:

Article

Hydrolytic Removal of Cured Urea–Formaldehyde Resins in Medium-Density Fiberboard for Recycling.

Published in:

Journal of Wood Chemistry & Technology, 2018, v. 38, n. 1, p. 1, doi. 10.1080/02773813.2017.1316741

By:

Lubis, Muhammad Adly Rahandi;
Hong, Min-Kug;
Park, Byung-Dae

Publication type:

Article

The Impact of Hydrolysis Regime on the Physical and Mechanical Characteristics of Medium-Density Fiberboards Manufactured from Recycled Wood Fibers.

Published in:

Fibers, 2023, v. 11, n. 12, p. 103, doi. 10.3390/fib11120103

By:

Savov, Viktor;
Antov, Petar;
Panchev, Christian;
Lubis, Muhammad Adly Rahandi;
Taghiyari, Hamid R.;
Lee, Seng Hua;
Krišťák, Ľuboš;
Todorova, Martina

Publication type:

Article

Effect of Hydrolysis Regime on the Properties of Fibers Obtained from Recycling Medium-Density Fiberboards.

Published in:

Fibers, 2023, v. 11, n. 7, p. 64, doi. 10.3390/fib11070064

By:

Savov, Viktor;
Antov, Petar;
Panchev, Christian;
Lubis, Muhammad Adly Rahandi;
Lee, Seng Hua;
Taghiyari, Hamid R.;
Todorova, Martina;
Petrin, Stoyko

Publication type:

Article

ENHANCING THE QUALITY OF PALM VENEER WITH OIL PALM BARK EXTRACT-RESORCINOL-FORMALDEHYDE RESIN IMPREGNATION.

Published in:

Acta Facultatis Xylologiae Zvolen, 2023, v. 65, n. 2, p. 45, doi. 10.17423/afx.2023.65.2.05

By:

Santoso, Adi;
Malik, Jamaludin;
Balfas, Jamal;
Rahandi Lubis, Muhammad Adly;
Trisatya, Deazy Rachmi;
Aini, Erlina Nurul;
Supriadi, Achmad;
Pari, Rohmah;
Mubarok, Mahdi;
Sedliačik, Ján;
Bekhta, Pavlo;
Krišťák, Ľuboš

Publication type:

Article

Formaldehyde-free plywood composites bonded with polyurethane adhesive derived from lignin-polyvinyl alcohol-based polyol.

Published in:

Discover Sustainability, 2025, v. 6, n. 1, p. 1, doi. 10.1007/s43621-025-00880-z

By:

Sapenti, Ajeng Dzakiyyah;
Sari, Rita Kartika;
Hermawan, Dede;
Antov, Petar;
Dudeva, Viktoria;
Lubis, Muhammad Adly Rahandi

Publication type:

Article

A Mini Review: The Application of Eupatorium Plants as Potential Cosmetic Ingredients.

Published in:

Cosmetics (2079-9284), 2022, v. 9, n. 5, p. 103, doi. 10.3390/cosmetics9050103

By:

Putri, Agmi Sinta;
Haqiqi, Muhammad Taufiq;
Supomo;
Kusuma, Irawan Wijaya;
Kuspradini, Harlinda;
Rosamah, Enih;
Amirta, Rudianto;
Paramita, Swandari;
Ramadhan, Rico;
Lubis, Muhammad Adly Rahandi;
Ariyanta, Harits Atika;
Aswandi, Aswandi;
Kholibrina, Cut Rizlani;
Ismayati, Maya;
Fatriasari, Widya;
Tarmadi, Didi;
Yuliansyah;
Suwinarti, Wiwin;
Kim, Yong-ung;
Arung, Enos Tangke

Publication type:

Article

Adhesion and Cohesion Performance of Polyurethane Made of Bio‐Polyol Derived from Modified Waste Cooking Oil for Exterior Grade Plywood.

Published in:

Macromolecular Materials & Engineering, 2024, v. 309, n. 12, p. 1, doi. 10.1002/mame.202400225

By:

Maulana, Sena;
Setiawan, Ika Putri;
Pusbanarum, Dyah;
Antov, Petar;
Iswanto, Apri Heri;
Kristak, Lubos;
Lee, Seng Hua;
Lubis, Muhammad Adly Rahandi

Publication type:

Article

Effects of Adhesive Types and Structural Configurations on Shear Performance of Laminated Board from Two Gigantochloa Bamboos.

Published in:

Forests (19994907), 2023, v. 14, n. 3, p. 460, doi. 10.3390/f14030460

By:

Mohd Yusof, Norwahyuni;
Md Tahir, Paridah;
Lee, Seng Hua;
Anwar Uyup, Mohd Khairun;
James, Redzuan Mohammad Suffian;
Osman Al-Edrus, Syeed Saifulazry;
Kristak, Lubos;
Reh, Roman;
Lubis, Muhammad Adly Rahandi

Publication type:

Article

Influence of Isocyanate Content and Hot-Pressing Temperatures on the Physical–Mechanical Properties of Particleboard Bonded with a Hybrid Urea–Formaldehyde/Isocyanate Adhesive.

Published in:

Forests (19994907), 2023, v. 14, n. 2, p. 320, doi. 10.3390/f14020320

By:

Iswanto, Apri Heri;
Sutiawan, Jajang;
Darwis, Atmawi;
Lubis, Muhammad Adly Rahandi;
Pędzik, Marta;
Rogoziński, Tomasz;
Fatriasari, Widya

Publication type:

Article

Effects of Boric Acid Pretreatment on the Properties of Four Selected Malaysian Bamboo Strips.

Published in:

Forests (19994907), 2023, v. 14, n. 2, p. 196, doi. 10.3390/f14020196

By:

Yusof, Norwahyuni Mohd;
Hua, Lee Seng;
Tahir, Paridah Md;
James, Redzuan Mohammad Suffian;
Al-Edrus, Syeed Saifulazry Osman;
Dahali, Rasdianah;
Roseley, Adlin Sabrina Muhammad;
Fatriasari, Widya;
Kristak, Lubos;
Lubis, Muhammad Adly Rahandi;
Reh, Roman

Publication type:

Article

Effects of Compression Ratio and Phenolic Resin Concentration on the Properties of Laminated Compreg Inner Oil Palm and Sesenduk Wood Composites.

Published in:

Forests (19994907), 2023, v. 14, n. 1, p. 83, doi. 10.3390/f14010083

By:

Ahamad, Wan Nabilah;
Salim, Sabiha;
Lee, Seng Hua;
Abdul Ghani, Muhammad Aizat;
Mohd Ali, Rabiatol Adawiah;
Md Tahir, Paridah;
Fatriasari, Widya;
Antov, Petar;
Lubis, Muhammad Adly Rahandi

Publication type:

Article

Environmentally Friendly Starch-Based Adhesives for Bonding High-Performance Wood Composites: A Review.

Published in:

Forests (19994907), 2022, v. 13, n. 10, p. 1614, doi. 10.3390/f13101614

By:

Maulana, Muhammad Iqbal;
Lubis, Muhammad Adly Rahandi;
Febrianto, Fauzi;
Hua, Lee Seng;
Iswanto, Apri Heri;
Antov, Petar;
Kristak, Lubos;
Mardawati, Efri;
Sari, Rita Kartika;
Zaini, Lukmanul Hakim;
Hidayat, Wahyu;
Giudice, Valentina Lo;
Todaro, Luigi

Publication type:

Article

Bio-Based Polyurethane Resins Derived from Tannin: Source, Synthesis, Characterisation, and Application.

Published in:

Forests (19994907), 2021, v. 12, n. 11, p. 1516, doi. 10.3390/f12111516

By:

Aristri, Manggar Arum;
Lubis, Muhammad Adly Rahandi;
Iswanto, Apri Heri;
Fatriasari, Widya;
Sari, Rita Kartika;
Antov, Petar;
Gajtanska, Milada;
Papadopoulos, Antonios N.;
Pizzi, Antonio

Publication type:

Article

Effect of pretreatment and compaction ratio on the properties of oriented strand board from sengon (Paraserianthes falcataria L. Nielsen) wood.

Published in:

Wood Material Science & Engineering, 2024, v. 19, n. 1, p. 206, doi. 10.1080/17480272.2023.2233952

By:

Maulana, Muhammad Iqbal;
Fitrianum, Fadilah;
Noviyanti, Derisna;
Audy, Refany;
Prasetia, Denni;
Maulana, Sena;
Lubis, Muhammad Adly Rahandi;
Hidayat, Wahyu;
Sari, Rita Kartika;
Febrianto, Fauzi;
Kim, Nam Hun

Publication type:

Article

Effect of thermo-vacuum modification on selected chemical, physical, and mechanical properties of Siberian larch (Larix sibirica L.) wood.

Published in:

Wood Material Science & Engineering, 2023, v. 18, n. 6, p. 1991, doi. 10.1080/17480272.2023.2212253

By:

Giudice, Valentina Lo;
Antov, Petar;
Koynov, Daniel;
Kristak, Lubos;
Lee, Seng Hua;
Lubis, Muhammad Adly Rahandi;
Mecca, Marisabel;
Moretti, Nicola;
Tiwari, Rupali;
Todaro, Luigi

Publication type:

Article

Visual inspection of surface mold growth on medium-density fiberboard bonded with oxidized starch adhesives.

Published in:

Wood Material Science & Engineering, 2023, v. 18, n. 3, p. 819, doi. 10.1080/17480272.2022.2073828

By:

Lubis, Muhammad Adly Rahandi;
Park, Byung-Dae;
Kim, Yeong-Suk;
Yun, Jeonghee;
Shin, Hee Chang

Publication type:

Article

Recent progress in ultra-low formaldehyde emitting adhesive systems and formaldehyde scavengers in wood-based panels: a review.

Published in:

Wood Material Science & Engineering, 2023, v. 18, n. 2, p. 763, doi. 10.1080/17480272.2022.2056080

By:

Kristak, Lubos;
Antov, Petar;
Bekhta, Pavlo;
Lubis, Muhammad Adly Rahandi;
Iswanto, Apri Heri;
Reh, Roman;
Sedliacik, Jan;
Savov, Viktor;
Taghiyari, Hamid R.;
Papadopoulos, Antonios N.;
Pizzi, Antonio;
Hejna, Aleksander

Publication type:

Article

Effect of cold-water treatment and hydrothermal carbonization of oil-palm-trunk fibers on compatibility with cement for the preparation of cement-bonded particleboard.

Published in:

Wood Material Science & Engineering, 2022, v. 17, n. 6, p. 979, doi. 10.1080/17480272.2021.1983871

By:

Sudarmanto;
Juwono, Ariadne L.;
Subyakto;
Budiman, Ismail;
Lubis, Muhammad Adly Rahandi;
Kusumah, Sukma Surya;
Kusumaningrum, Wida Banar;
Adi, Danang Sudarwoko

Publication type:

Article

Modification of nanoclay with different methods and its application in urea-formaldehyde bonded plywood panels.

Published in:

Wood Material Science & Engineering, 2022, v. 17, n. 6, p. 734, doi. 10.1080/17480272.2021.1934897

By:

Yadav, Sumit Manohar;
Lubis, Muhammad Adly Rahandi;
Park, Byung-Dae

Publication type:

Article

Influence of needle-punching treatment and pressure on selected properties of medium density fiberboard made of bamboo (Dendrocalamus strictus Roxb. Nees).

Published in:

Wood Material Science & Engineering, 2022, v. 17, n. 6, p. 712, doi. 10.1080/17480272.2021.1931440

By:

Sihag, Kapil;
Yadav, Sumit Manohar;
Lubis, Muhammad Adly Rahandi;
Poonia, Pawan Kumar;
Negi, Anil;
Khali, Dwarika P.

Publication type:

Article

Influence of different hot-pressing conditions on the performance of eco-friendly jabon plywood bonded with citric acid adhesive.

Published in:

Wood Material Science & Engineering, 2022, v. 17, n. 6, p. 400, doi. 10.1080/17480272.2021.1884898

By:

Sutiawan, Jajang;
Hermawan, Dede;
Massijaya, Muhammad Yusram;
Kusumah, Sukma Surya;
Lubis, Muhammad Adly Rahandi;
Marlina, Resti;
Purnomo, Deni;
Sulastiningsih, Ignasia Maria

Publication type:

Article

Effects of surface laminate type and recycled fiber content on properties of three-layer medium density fiberboard.

Published in:

Wood Material Science & Engineering, 2020, v. 15, n. 3, p. 163, doi. 10.1080/17480272.2018.1528479

By:

Hong, Min-Kug;
Lubis, Muhammad Adly Rahandi;
Park, Byung-Dae;
Sohn, Chang Hyun;
Roh, Jeongkwan

Publication type:

Article

In-situ modification of low molar ratio urea–formaldehyde resins with cellulose nanofibrils for plywood.

Published in:

Journal of Adhesion Science & Technology, 2021, v. 35, n. 22, p. 2452, doi. 10.1080/01694243.2021.1890370

By:

Wibowo, Eko Setio;
Lubis, Muhammad Adly Rahandi;
Park, Byung-Dae

Publication type:

Article

Modification of urea-formaldehyde resin adhesives with oxidized starch using blocked pMDI for plywood.

Published in:

Journal of Adhesion Science & Technology, 2018, v. 32, n. 24, p. 2667, doi. 10.1080/01694243.2018.1511075

By:

Lubis, Muhammad Adly Rahandi;
Park, Byung-Dae

Publication type:

Article

Properties of Ramie (Boehmeria nivea (L.) Gaudich) Fibers Impregnated with Non-Isocyanate Polyurethane Resins Derived from Lignin.

Published in:

Materials (1996-1944), 2023, v. 16, n. 16, p. 5704, doi. 10.3390/ma16165704

By:

Raditya, Vincentius Yolanda Angger;
Lubis, Muhammad Adly Rahandi;
Sari, Rita Kartika;
Antov, Petar;
Lee, Seng Hua;
Kristak, Lubos;
Mardawati, Efri;
Iswanto, Apri Heri

Publication type:

Article

Tensile Strength Improvements of Ramie Fiber Threads through Combination of Citric Acid and Sodium Hypophosphite Cross-Linking.

Published in:

Materials (1996-1944), 2023, v. 16, n. 13, p. 4758, doi. 10.3390/ma16134758

By:

Wulandari, Asri Peni;
Awis, Vira Putri Dinda;
Budiono, Ruly;
Kusmoro, Joko;
Hidayat, Sidiq Syamsul;
Masruchin, Nanang;
Lubis, Muhammad Adly Rahandi;
Fatriasari, Widya;
Rachmawati, Ulyaa

Publication type:

Article

Analysis of the hydrolysates from cured and uncured urea-formaldehyde (UF) resins with two F/U mole ratios.

Published in:

Holzforschung: International Journal of the Biology, Chemistry, Physics, & Technology of Wood, 2018, v. 72, n. 9, p. 759, doi. 10.1515/hf-2018-0010

By:

Lubis, Muhammad Adly Rahandi;
Park, Byung-Dae

Publication type:

Article

Enhancing the performance of natural rubber latex with polymeric isocyanate as cold-pressing and formaldehyde free adhesive for plywood.

Published in:

Journal of Adhesion, 2023, v. 99, n. 1, p. 58, doi. 10.1080/00218464.2021.1999233

By:

Lubis, Muhammad Adly Rahandi;
Falah, Faizatul;
Harini, Dian;
Sudarmanto;
Kharisma, Anggi;
Tjahyono, Budi;
Fatriasari, Widya;
Subiyanto, Bambang;
Suryanegara, Lisman;
Iswanto, Apri Heri

Publication type:

Article

Enhancing the performance of low molar ratio urea–formaldehyde resin adhesives via in-situ modification with intercalated nanoclay.

Published in:

Journal of Adhesion, 2021, v. 97, n. 14, p. 1271, doi. 10.1080/00218464.2020.1753515

By:

Lubis, Muhammad Adly Rahandi;
Park, Byung-Dae

Publication type:

Article

Nanocellulose-Based Adhesives for Sustainable Wood-Polymer Composites: Recent Advancement and Future Perspective.

Published in:

Journal of Renewable Materials, 2025, v. 13, n. 4, p. 773, doi. 10.32604/jrm.2025.058359

By:

Hariry, Amelia;
Mardawati, Efri;
Iswanto, Apri Heri;
Karliati, Tati;
Zaini, Lukmanul Hakim;
Lubis, Muhammad Adly Rahandi

Publication type:

Article

An Evaluation on Physical Characteristics of Konjac Polysaccharides-Based Film Coating and Its Application for Strawberries Preservation.

Published in:

Journal of Renewable Materials, 2025, v. 13, n. 1, p. 181, doi. 10.32604/jrm.2024.056475

By:

Nurliasari, Desy;
Dewantoro, Awaly Ilham;
Lubis, Muhammad Adly Rahandi;
Kastaman, Roni;
Djali, Mohamad;
Mardawati, Efri;
Rahmah, Devi Maulida;
Nurhasanah, Siti;
Abdullah, Akbar Hanif Dawam;
Zaini, Lukmanul Hakim

Publication type:

Article

Influence of Formulation and Hot-Pressing Conditions on the Performance of Bio-Based Molasses Adhesive for Plywood.

Published in:

Journal of Renewable Materials, 2024, v. 12, n. 8, p. 1383, doi. 10.32604/jrm.2024.052052

By:

Sutiawan, Jajang;
Syahfitri, Alifah;
Kusumah, Sukma Surya;
Hermawan, Dede;
Sari, Rita Kartika;
Hakim, Luthfi;
Mardawati, Efri;
Lubis, Muhammad Adly Rahandi

Publication type:

Article

Thermo-Mechanical, Physico-Chemical, Morphological, and Fire Characteristics of Eco-Friendly Particleboard Manufactured with Phosphorylated Lignin Addition.

Published in:

Journal of Renewable Materials, 2024, v. 12, n. 7, p. 1311, doi. 10.32604/jrm.2024.052172

By:

Iswanto, Apri Heri;
Manurung, Harisyah;
Sohail, Asma;
Hua, Lee Seng;
Antov, Petar;
Nawawi, Deded Sarip;
Latifah, Sarah;
Kayla, Dewi Shafa;
Kusumah, Sukma Surya;
Lubis, Muhammad Adly Rahandi;
Osvaldová, Linda Makovická;
Hussin, Mohd. Hazwan;
Selvasembian, Rangabhashiyam;
Chen, Lum Wei;
Nurcahyani, Puji Rahmawati;
Kim, Nam Hun;
Fatriasari, Widya

Publication type:

Article

Overview of the Synthesis, Characterization, and Application of Tannin-Glyoxal Adhesive for Wood-Based Composites.

Published in:

Journal of Renewable Materials, 2024, v. 12, n. 7, p. 1165, doi. 10.32604/jrm.2024.051854

By:

Anggini, Awanda Wira;
Sari, Rita Kartika;
Mardawati, Efri;
Karliati, Tati;
Iswanto, Apri Heri;
Lubis, Muhammad Adly Rahandi

Publication type:

Article

Effect of citric acid on the properties of thermoplastic bitter cassava starch plasticized with isosorbide.

Published in:

Polymers from Renewable Resources, 2024, v. 15, n. 1, p. 43, doi. 10.1177/20412479231202591

By:

Arfiathi, Arfiathi;
Sumirat, Riska;
Syamani, Firda Aulya;
Lubis, Muhammad Adly Rahandi;
Filianty, Fitry;
Nurhamiyah, Yeyen

Publication type:

Article

Development and Characterization of Novel Hybrid Particleboard Made from Several Non-Wood Lignocellulosic Materials.

Published in:

Polymers (20734360), 2025, v. 17, n. 4, p. 512, doi. 10.3390/polym17040512

By:

Tarigan, Fazilla Oktaviani;
Hakim, Luthfi;
Purwoko, Agus;
Sucipto, Tito;
Nasution, Halimatuddahliana;
Fatriasari, Widya;
Lubis, Muhammad Adly Rahandi;
Sutiawan, Jajang;
Bakhsi, Mohammad Irfan;
Kim, Nam-Hun;
Antov, Petar;
Lee, Seng Hua;
Selvasembian, Rangabhashiyam;
Hussin, Mohd Hazwan;
Aristri, Manggar Arum;
Iswanto, Apri Heri

Publication type:

Article

Performance of Oriented Strand Board Made of Heat-Treated Bamboo (Dendrocalamus asper (Schult.) Backer) Strands.

Published in:

Polymers (20734360), 2024, v. 16, n. 12, p. 1692, doi. 10.3390/polym16121692

By:

Maulana, Sena;
Suwanda, Astri Aulia;
Murda, Rio Ardiansyah;
Antov, Petar;
Komariah, Rahma Nur;
Maulana, Muhammad Iqbal;
Augustina, Sarah;
Lee, Seng Hua;
Mahardika, Melbi;
Rianjanu, Aditya;
Taher, Tarmizi;
Kristak, Lubos;
Bindar, Yazid;
Iswanto, Apri Heri;
Lubis, Muhammad Adly Rahandi

Publication type:

Article

Eco-Friendly and High-Performance Bio-Polyurethane Adhesives from Vegetable Oils: A Review.

Published in:

Polymers (20734360), 2024, v. 16, n. 11, p. 1613, doi. 10.3390/polym16111613

By:

Maulana, Sena;
Wibowo, Eko Setio;
Mardawati, Efri;
Iswanto, Apri Heri;
Papadopoulos, Antonios;
Lubis, Muhammad Adly Rahandi

Publication type:

Article

Surface Roughness, Dynamic Wettability, and Interphase of Modified Melamine Formaldehyde-Based Adhesives on Jabon Wood.

Published in:

Polymers (20734360), 2024, v. 16, n. 8, p. 1084, doi. 10.3390/polym16081084

By:

Amin, Yusup;
Nugroho, Naresworo;
Bahtiar, Effendi Tri;
Dwianto, Wahyu;
Lubis, Muhammad Adly Rahandi;
Adzkia, Ulfa;
Karlinasari, Lina

Publication type:

Article

Thermal Properties' Enhancement of PLA-Starch-Based Polymer Composite Using Sucrose.

Published in:

Polymers (20734360), 2024, v. 16, n. 8, p. 1028, doi. 10.3390/polym16081028

By:

Massijaya, Sri Yustikasari;
Lubis, Muhammad Adly Rahandi;
Nissa, Rossy Choerun;
Nurhamiyah, Yeyen;
Kusumaningrum, Wida Banar;
Marlina, Resti;
Ningrum, Riska Surya;
Sutiawan, Jajang;
Hidayat, Iman;
Kusumah, Sukma Surya;
Karlinasari, Lina;
Hartono, Rudi

Publication type:

Article

Performance of Particleboard Made of Agroforestry Residues Bonded with Thermosetting Adhesive Derived from Waste Styrofoam.

Published in:

Polymers (20734360), 2024, v. 16, n. 4, p. 543, doi. 10.3390/polym16040543

By:

Karliati, Tati;
Lubis, Muhammad Adly Rahandi;
Dungani, Rudi;
Maulani, Rijanti Rahaju;
Hadiyane, Anne;
Rumidatul, Alfi;
Antov, Petar;
Savov, Viktor;
Lee, Seng Hua

Publication type:

Article

Characterization and Application of Non-Formaldehyde Binder Based Citric Acid, Maleic Acid, and Molasses Adhesive for Plywood Composite.

Published in:

Polymers (20734360), 2023, v. 15, n. 19, p. 3897, doi. 10.3390/polym15193897

By:

Sutiawan, Jajang;
Syahfitri, Alifah;
Purnomo, Deni;
Sudarmanto;
Narto;
Akbar, Fazhar;
Triwibowo, Dimas;
Ismadi;
Amanda, Putri;
Kusumah, Sukma Surya;
Lubis, Muhammad Adly Rahandi;
Hermawan, Dede;
Sulastiningsih, Ignasia Maria;
Nuryawan, Arif;
Hakim, Luthfi

Publication type:

Article